共查询到20条相似文献，搜索用时 31 毫秒
1.
ｇ ｏｎ ａ １５０ Ｍ￣３ Ｔｕｒｂｏ Ｏｘｙｇｅｎ Ｇａｓ ＥｘｐａｎｄｅｒTX１ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｏｎｅｏｆｔｈｅｉｍｐｏｒｔａｎｔｒｅａｓｏｎｓｆｏｒｕｓｉｎｇａｃｔｉｖｅｍａｇｎｅｔｉｃｂｅａｒｉｎｇｔｏｒｅｐｌａｃｅｔｈｅａｅ?.. 相似文献
2.
POE官能化及其增韧PA66的研究 总被引：1，自引：0，他引：1
采用在熔融挤出过程中提高双螺杆挤出机螺杆转速的方法,研究了机械力引发甲基丙烯酸缩水甘油酯(GMA)熔融接枝弹性体POE的接枝反应。红外光谱法分析的结果表明,随着螺杆转速的增加,接枝产物的接枝率出现先下降后增大的变化趋势,接枝产物的熔体流动速率(MFR)在螺杆转速n≥400 r/min时出现显著增大;随着接枝反应温度的增加,产物接枝率和熔体流动速率均明显增大。一定条件下,制得具有一定接枝率(红外表征)和较好熔体流动性(MI=0.8～14.0 g/(10 min))的接枝产物(POE-g-GMA)。材料力学性能测试和试样断面SEM分析结果表明,此接枝产物POE-g-GMA对PA66具有较好的增韧作用,可使PA66/POE-g-GMA共混材料的缺口冲击强度达到原未改性材料的8倍。 相似文献
3.
In the application of active magnetic bearings(AMB),one of the key problems to be solved is the safety and stabiltiy in the sense of rotor dynamics,The project related to the present paper deals with the method for analyzing bearing rotor systems with high rotation speed and specially supported by active magnetic bearings,and studies its rotor dynamics performance,including calculation of the natural frequencies with their distribution characteristics,and the critical speeds of the system.one of the targets of this project is to formulate a theory and method valid for the analysis of the dynamic performance of the active magntic bearing-rotor systemby combining the traditional theory and method of rotor dynamics with the analytical theory and design method based on modern control theory of the AMB system. 相似文献
4.
1 IntroductionItiswellknownthatfluidflowsinsealsandbear ingsturnfromlaminarregimeintoturbulentonewhentheirReynoldsnumberbecomeshigherthanacriticalvalue .Theearliesttheoriesofhydrodynamiclubricationhavebeenbasedonthepresumptionofex istenceoflaminarflowregime .Inturbulentregime ,however ,thecharacteristicsofsealsandbearingsdif ferfromthepredictionsbytheoriessobased .Speciallubricationtheoriesbasedoncontemporaryturbulencemodelssincethelaterhalfof 190 0’swerethereforedevelopedtotaketheeffectsof… 相似文献
5.
Research on the operating characteristics of parallel 4-DOF electric platform with 4TPS-PS structure 总被引：1，自引：0，他引：1
CHENG Jia WANG Xuan-yin FU Xiao-jie LI Qiang 《浙江大学学报(A卷英文版)》2007,8(11):1800-1807
The 4TPS-PS parallel platform designed for a stabilization and automatic tracking system is a novel lower-mobility parallel mechanism. In the first part of this paper, the structure of the platform is described and the kinematics model is built. The workspace of the platform is defined as the full reachable rotation workspace when the Z coordinate dimension of the upper plate varies continuously. A fast searching method of the full reachable workspace is presented, after which the inverse kinematics of the platform is deduced. The forward and inverse solutions of the speed and force of the platform are deduced. According to the characteristic of the 4TPS-PS platform’s structure, a fast searching algorithm of the maximum generalized speed and maximum generalized force output by the upper plate is put forward based on the forward and inverse solutions of the platform’s speed and force. The 4TPS-PS platform prototype built by the State Key Laboratory of Fluid Power Transmission and Control of China is taken as the research subject. The full reachable rotation workspace of the prototype is computed out and analyzed. The curves of maximum generalized speed and maximum generalized force of the prototype are computed out and plotted. Finally, the com- puting and analyzing results of the operating characteristics are confirmed through the experiment. 相似文献
6.
The optimization of cultural conditions for β-glucanase production byBacillus subtilis ZJF-1A5 was investigated in flask trials. Temperature had great effect on β-glucanase production which maximized at optimal
temperature of 37°C and decreased significantly when temperature was over 37°C. Charge quantity affected β-glucanase production
significantly. Adding oxygen vector N-dodecane or acetic ether benefited β-glucanase production, but it depended on the concentration
and charge quantity. The results of fractional factorial design showed that age and size of inoculum and shaking speed were
the key factors affecting β-glucanase production and the cultivation time span to reach the highest β-glucanase activity.
The optimal cultural conditions for β-glucanase production obtained with CCD were as follows: inoculum age and size (16 h,
3.82% (v/v)), shaking speed 210 r/min, charge quantity of 30 mL in 250 mL flask and initial pH 7.0, cultured at 37°C for 50
h. Repeated experimental results accorded with those predicted by a second-order polynomial model. The amount of β-glucanase,
α-amylase and neutral protease produced byB subtilis ZJF-1A5 was associated partially with cell growth. Those three enzymes' activities increased following the cell growth and
increased significantly when cells entered the stationary phase.
Project (No. B0608) supported by the National Natural Science Foundation of China and a grant (2001121B25) from Hangzhou Science
and Technology Development Project of Zhejiang Province, China 相似文献
7.
王航罗敏峰 《福建工程学院学报》2021,(6):524-531
为探究金属工件在砂带磨削加工中的材料去除机理,对砂带磨削系统简化后建立几何模型,并设置模型参数及运动建立了砂带磨削加工的离散元动态仿真。仿真结果表明:通过单因子试验研究不同的磨削参数对材料去除深度(material removal depth, MRD)的影响规律?通过正交试验得到不同磨削参数对MRD 的影响贡献率,其中砂带转速的影响最大、其次是砂带进给量,同时得到磨削参数的最优组合为工件进给量为0.5 mm,砂带转速为1 800 r/ min,工件速度为40 mm/ s,水平夹角为40°;最后通过实验验证仿真结果与结论的正确性。 相似文献
8.
DONG Mian ZHANG Chun MAI Song-ping WANG Zhi-hua LI Dong-mei 《浙江大学学报(A卷英文版)》2006,7(6):1056-1060
INTRODUCTION Cochlear implants have been very successful in restoring auditory function in individuals who suffer from sensorineural deafness (Rauschecker and Shannon, 2002). A generic cochlear implant usually consists of an external part and an internal part, which are connected by an inductive transcutaneous link, as illustrated in Fig.1. The link sends both data and power to an internal circuit. The output data from a speech processor are modulated and amplified suc-cessively so that… 相似文献
9.
β-glucanase was purified from a solid-state culture ofTrichoderma reesei on wheat bran in three steps which comprised ammonium sulfate precipitation, Sephadex G-100 chromatography, and DEAE-Sephadex
A-50 chromatography. The molecular mass was determined to be 35.21 kilodaltons by sodium dodecyl sulfate-12.5% polyacrylamide
gel electrophoresis. The β-glucanase at low pHs was more stable than that at high pHs, and optimum pH was 5.0. The optimum
temperature was 60°C, and β-glucanase was relatively stable at below 40°C for 60 min. TheK
m of the enzyme on β-glucan was 10.86 mg/ml, and theV
max on β-glucan was 14286 μmol of glucose equivalents per mg of the pure enzyme per min. The β-glucanase activity was significantly
inhibited by Fe3+ ions, and was reduced in the presence of Cu2+ ions, Mn2+ ions and Mg2+ ions at 5 mmol/L and 10 mmol/L, respectively. The β-glucanase activity was stimulated by Co2+ ions, Ca2+ ions, Zn2+ ions, and Fe2+ ions at 1 mmol/L and 5 mmol/L, respectively.
Project supported by Foundation for University Key Teacher of the State Ministry of Education, the National Natural Science
Foundation of China (No. 30000118) and Zhejiang Provincial Natural Science Foundation of China (No. 399409). 相似文献
10.
11.
1IntroductionIn recent years,there are many papers published ontoluene oxidation to benzaldehyde.The most i mpor-tant research works of these papers are electric oxida-tion and toluene oxidizied by using air in gas phase orin liquid phase.A novel technology for benzaldehydeproduction is developed,with which manganese sul-fate reacts with ammonium carbonate to yield manga-nese carbonate and ammoniun sulfate.Manganese car-bonate is baked for being changed into manganese ses-quioxide,which can ox… 相似文献
12.
A novel reconstruction method from contours lines is provided. First, we use a simple method to get rid of redundant points
on every contour, then we interpolate them by using cubic Bézier spline curve. For corresponding points of different contours,
we interpolate them by the cubic Bézier spline curve too, so the whole surface can be reconstructed by the bi-cubic Bézier
spline surface. The reconstructed surface is smooth because every Bézier surface is patched with G2 continuity, the reconstruction speed is fast because we can use the forward elimination and backward substitution method
to solve the system of tridiagonal equations. We give some reconstruction examples at the end of this paper. Experiments showed
that our method is applicable and effective.
Project supported by the National Natural Science Foundation of China (Nos. 60373070 and 60573147), Postdoctor Foundation
of Shanghai (No. 05R214129), and Zhejiang Education Foundation of China (No. 20050786) 相似文献
13.
This paper proposes novel multi-layer neural networks based on Independent Component Analysis for feature extraction of fault
modes. By the use of ICA, invariable features embedded in multi-channel vibration measurements under different operating conditions
(rotating speed and/or load) can be captured together. Thus, stable MLP classifiers insensitive to the variation of operation
conditions are constructed. The successful results achieved by selected experiments indicate great potential of ICA in health
condition monitoring of rotating machines.
Project supported by the National Natural Science Foundation (No. 50205025) and the Natural Science Foundation of Zhejiang
Province (No. 5001004). 相似文献
14.
Multi-objective optimization of water supply network rehabilitation with non-dominated sorting Genetic Algorithm-II 总被引：2，自引：0，他引：2
Xi JIN Jie ZHANG Jin-liang GAO Wen-yan WU 《浙江大学学报(A卷英文版)》2008,9(3):391-400
Through the transformation of hydraulic constraints into the objective functions associated with a water supply network rehabilitation problem, a non-dominated sorting Genetic Algorithm-II （NSGA-II） can be used to solve the altered multi-objective optimization model. The introduction of NSGA-II into water supply network optimal rehabilitation problem solves the conflict between one fitness value of standard genetic algorithm （SGA） and multi-objectives of rehabilitation problem. And the uncertainties brought by using weight coefficients or punish functions in conventional methods are controlled. And also by in- troduction of artificial inducement mutation （AIM） operation, the convergence speed of population is accelerated; this operation not only improves the convergence speed, but also improves the rationality and feasibility of solutions. 相似文献
15.
In this paper, we prove that any polygon P in R2 containing a fixed smooth. strictly convex and origin-symmetric body Γ whose boundary is real analytic in its interior, can be determined by its Γ-section functions among the polygons. 相似文献
16.
采用搅拌摩擦焊技术对6061-T5铝合金进行焊接,分析了焊接速度对接头成形、微观结构及力学性能的影响.结果表明:随着焊接速度的增加,沉淀相固溶度下降,晶粒细化;焊接速度过大时,热输入不足,呈现原始态组织.当转速为800 r/min,焊接速度为60 mm/min时,接头成形良好,抗拉强度达到最大值.采用合适的搅拌摩擦焊工艺参数,6061-T5铝合金能实现可靠的连接. 相似文献
17.
Randall D. Peters 《Science & Education》2004,13(7):641-652
In these studies, a vegetable can containing fluidwas swung as a pendulum by supporting its end-lipswith a pair of knife edges. The motion was measuredwith a capacitive sensor and the logarithmic decrementin free decay was estimated from computer-collectedrecords. Measurements performed with nine differenthomogeneous liquids, distributed through six decadesin the viscosity , showed that the damping ofthe system is dominated by rather than externalforces from air or the knife edges. The log decrementwas found to be maximum (0.28) in the vicinity of = 0.7 Pa s and fell off more than 15 fold(below 2 × 10-2) for both small viscosity( < 1 × 10-3 Pa s) and also for largeviscosity ( > 1 × 103 Pa s). A simple modelhas been formulated, which yields reasonable agreementbetween theory and experiment by approximating therelative rotation of can and liquid. 相似文献
18.
19.
姜海益 《浙江大学学报(A卷英文版)》2004,5(7):754-758
Let k,m,n be positive integers,and k≥2,α∈(0,1],0＜r＜min {m,n} an integer,d=r (m-r)/(k α),and iff∈ Ck,α(Rm,R″),A =Cr(f)= {x ∈ Rm ,rank(Df(x))≤r},thenf(A)is d-null.Thus the statement posed by Arthur Sard in 1965 can be completely solved when k≥2. 相似文献
20.
改性淀粉絮凝剂处理含油废水的试验效果 总被引：1，自引：0，他引：1
通过将玉米淀粉与氢氧化钠、三氯化铝和无水碳酸钠在恒温磁力搅拌器上搅拌、加热,使得玉米淀粉改性,制得改性淀粉絮凝剂,并研究了改性淀粉絮凝剂对含油废水的处理效果.试验结果显示,在搅拌速度与时间分别为快搅速度200 r/min,快搅时间0.5 min;慢搅速度100 r/min,慢搅时间3 min的情况下,使用改性淀粉絮凝剂处理含油废水时,COD去除率为77.94%、石油类去除率为61.2%、透光率为62.7%、SS去除率为79.96%;最佳反应条件为:投药量为12 mg/L、温度为5~30℃、pH值为6-8. 相似文献