首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The crystallization of soluble salts plays a significant role in the deterioration of porous cultural property. A common response to salt damage problems is to undertake treatments aimed at reducing the salt content of the affected object, most typically through the application of poultices. The process of poulticing is in theory relatively simple: the wet poultice material is applied to the surface of the object to be treated, and is kept in place for some period of time before being removed. However, in practice, the efficiency of the salt extraction, or even the location of salt accumulation post treatment is more difficult to predict. This paper examines the physical principles of salt ion and moisture transport by which poultices function, and shows how depending on the application methodology, these treatments can be divided into diffusion and advection-based methods. The maximum salt extraction efficiency, the depth to which this can be achieved, and the time scale required is estimated for each type of poulticing system, to gain a better understanding of their working properties and performance. Finally, the pros, cons and limitations of desalination treatments are discussed.  相似文献   

2.
Salt crystallization in porous materials constitutes one of the most frequent causes of decay of buildings in a wide range of environments. Up to now no definitive solution exists to limit salt crystallization damage, unless of removing either the salt or the moisture. The possibility of making the process of salt crystallization less harmful by means of crystallization inhibitors has only recently been considered. Crystallization inhibitors are known to delay nucleation and to modify the growth rate of the crystals in bulk solution, but their possible application for the prevention of salt decay in porous material is still controversial.The present paper reports a series of systematic investigations performed on three different materials (a limestone, a sandstone and a brick) contaminated with two types of salt (sodium chloride and sodium sulphate) and two types of inhibitors (sodium-ferrocyanide and diethylenetriaminepentakis methylphosphonic acid). Drying experiments have been performed to study the effect of the inhibitors on the salt solution transport. Accelerated crystallization experiments have investigated the possible consequences of the application of the inhibitor on salt crystallization damage (quantified as material loss).Environmental Scanning Electron Microscope (ESEM) has been used to study how the presence of inhibitors affects the crystallization morphology of salt in the material.The results show that the effect of the inhibitor strongly depends on the type of substrate. NaFeC, when applied on NaCl contaminated limestone and brick was able to enhance the drying and to favour the appearance of efflorescences, whereas the effect on the sandstone was very limited. DTPMP enhanced the drying of Na2SO4 laden sandstone, but had no influence on the drying of both brick and limestone. These different have been attributed to the properties of the materials, in particular pore size distribution and composition.The effects of the inhibitor on salt crystallization damage were less evident: no differences in surface damage, quantified as material loss, were observed between specimens with and without inhibitor.  相似文献   

3.
The aim of this study is practically to establish a chemical strategy for cleaning soiled deposits and encrustations on archaeological glasses. Investigations were performed on a series of Roman glass samples (Fragments and complete objects) coming from different excavations in northern Jordan. The chemical composition of the glass samples was determined by X-ray fluorescence spectrometer (XRF) analysis technique, whereas X-ray powder diffractometer (XRD) and Energy dispersive X-ray (EDX) methods were used to determine the mineralogical and elemental composition of the soiled deposits and encrustations on the glass surfaces. Furthermore, Scanning Electron Microscopy (SEM) examination and optical assessment were performed before and after cleaning glass. The glass samples were subjected to different cleaning protocols such as Calgon (Sodium hexametaphosphate), ethylenediaminetetraacetic acid (EDTA) at different pH values, citric and tartaric acids and piranha solution (a solution of sulphuric acid and hydrogen peroxide). Sepiolite poultices soaked by chemical agents were the most suitable methods used for applying chemical solutions on the glass surface. It can be concluded that EDTA is generally accepted as the most effective chelating agents recommended for cleaning encrustations on durable glass. It was more effective and safe at neutral pH with low concentrations around 5 to 7%. The calcareous crusts can safely be removed by using a piranha solution. Citric and tartaric acids appeared a moderate efficiency on cleaning weathered and stable glass. Calgon has a tendency to damage corroded and iridescent surfaces, and should be avoided when cleaning weathered glass.  相似文献   

4.
Epoxy resins, widely used in conservation, still remain controversial materials. Considering some of the drawbacks that currently limit the application of epoxy consolidants, we present the application of the cationic ring opening polymerization as a novel method to cure the epoxy monomer in the restoration field. The cationic polymerization was carried out through a redox system based on the reduction of the iodonium salt in the presence of ascorbic acid catalyzed by a copper salt. The use of this initiator system for carrying out a suitable consolidant for lime plaster is considered. First, the film properties of the cured films were investigated. Then, the formulation was applied on a sample of plaster and its compatibility was verified. Its effectiveness as a consolidant product is explored through the evaluation of chromatic changes, mechanical strength, morphology of the re-aggregated material, and changes of the surface properties.  相似文献   

5.
The use of phase change materials (PCMs) in civil buildings as an effective thermal energy storage solution has been well documented in literature and proven in the field. When applied to Cultural Heritage, PCMs’ technology needs to be adapted to specific requirements. Besides the important objectives of economic return and human comfort, the indoor microclimatic conditions have to be suitable for conservation purposes. The application of PCMs’ technology to Cultural Heritage has been investigated within the European MESSIB (Multi-source Energy Storage System Integrated in Buildings) project. Firstly, several methodologies of incorporation of PCMs in different materials were studied and tested. The thermal properties of gypsum panels and silicon coatings incorporating micro-encapsulated PCMs in the form of powder and emulsion were analysed in the laboratory. Then, PCMs incorporated in gypsum panels in contact with a wooden panel were tested and their effect on the thermal behaviour of the wooden panel was evaluated under thermal cycles in a climatic chamber. PCMs incorporated in silicon coatings in contact with a painting were also tested. Moreover, gypsum panels containing PCMs were tested in the S. Croce Museum in Florence, Italy, where the microclimatic monitoring has shown thermal conditions potentially dangerous for the works of art preserved. The research performed both in the laboratory and on the field confirmed the effectiveness of the PCMs as thermal storage solutions, but also gave evidence on an important drawback when the material incorporating PCMs is in direct contact with an object of art.  相似文献   

6.
A series of light-fastness tests were conducted on a group of ethnographic objects that will be on exhibit at the Smithsonian Institution Arctic Studies Center, a recent addition to the Anchorage Museum at Rasmuson Center in Alaska. The objects surveyed belong to the collections of the Smithsonian National Museum of Natural History and the Smithsonian National Museum of the American Indian. This work was designed as a feasibility study on the use of a micro-fading tester as a non-contact and non-destructive technique to evaluate the light-stability of materials present in ethnographic collections. A broad range of objects containing a wide variety of materials were selected for the study. The materials investigated included a variety of dyes applied on silk, cotton, and wool substrates along with some unusual materials such as tanned skin and seal gut skin. The results from this investigation have allowed establishing exhibition recommendations taking into consideration the sensitivity of each object, light levels in the museum building, and estimated light exposures based on the duration of the exhibit. The micro-fading tester has proven to be a very useful tool for determining the light-stability of ethnographic materials without causing any harm to the objects. Objects containing equivalent materials are usually classified under a general category based on their probable sensitivity to light. However, micro-fading test results have permitted the detection of dissimilarities among some of these objects, which could be associated to variations in prior fading histories, the quality of raw materials, and different preparation methods.  相似文献   

7.
This paper aims at proposing a new calibration material for microdrilling resistance measurements. Microdrilling resistance is a microdestructive method mainly used in built heritage in order to determine the strength profile in depth. This method is suitable to detect changes in the material cohesion, either due to a different state of preservation or to the action of a consolidant. Calibration materials are often used in microdrilling measurements in order to characterise the drill bit initial value and to correct the variations existing within the initial values of a set of drill bits. Calibration materials are also useful to detect the wear effect on a drill bit due to an abrasive stone. Moreover, such materials can be used for comparing results obtained with different microdrilling machines. In this work, halite was chosen to be tested as a calibration material due to its properties, as low hardness and isotropy. Halite single crystals and halite salt stone from different provenances were tested in order to evaluate the suitability of this material to the requests of a calibration material for microdrilling resistance applications, as for instance being homogeneous, non-abrasive, sensitive and available worldwide. Experimental results show that halite from different provenances is very homogeneous, especially in the crystalline form. This form of halite is slightly more expensive than stone halite; however its costs are comparable to ARS and significantly lower than Macor (other calibration materials commonly used for microdrilling resistance measurements). Due to the advantages of halite for calibration purposes, this material should be further tested by other authors in order to validate our conclusions.  相似文献   

8.
The ceramic artefacts, excavated from ancient shipwrecks, are generally saturated with soluble salts, mainly NaCl, within the porous structure of ceramics. The salinity contents typically exhibit ionic and osmotic pressures to the ceramic microstructures, thus causing significant damages to the integrity of ceramic artefacts. While the utilisation of aqueous soaking methods is commonly accepted for effective desalination processes of ceramics, the relationships between the structural characteristics of ceramics and the desalination efficiency have not been demonstrated. In this study, we examined the desalination processes of various ceramics excavated from the Taean shipwrecks in South Korea to identify major controlling factors for the desalination processes. Our results indicated that the physical properties of ceramics including the water absorption and the pore size distribution greatly influence on the desalination process time and efficiency. It is also found that the surface condition of ceramic samples such as microstructural cracks on the glaze layer is a crucial component of the desalination characteristics. Nevertheless, the small residue of salts such as NaCl crystals were found in the microstructures of some ceramics after prolonged desalination periods. Therefore, it is important to control the humidity and temperature in the conservation environment for desalinated ceramic artefacts even after desalination.  相似文献   

9.
In this paper the consolidating and protective products used in the restoration of stone manufactured objects of artistic interest are discussed; advantages of the different products and the relevant properties of the polymeric materials are underlined. The penetration of polymeric consolidating materials is very small and the in situ polymerisation of the monomers is suggested as an alternative technique to using macromolecular solutions. Some experimental results are presented showing that the in situ polymerisation improves the consolidating and the protective properties of polymers.  相似文献   

10.
This paper deals with the comparative evaluation of different procedures of salt extraction designed for archaeological ceramics from submarine burial environments. The experimental work was carried out on a particular type of late-Roman cooking ware finds (Pantellerian ware) found in a shipwreck near the shoreline of the Island of Pantelleria (Sicily). The studied ceramic test-pieces were first recognised in terms of bulk characteristics (mineralogy, petrography and chemistry). SEM-EDS observation allowed verification of the presence of various secondary minerals at the surface and in the pore spaces formed after the prolonged permanence in seawater under oxidising or reducing conditions. Pore-size distribution was also determined in the same fragments that had been subjected to the salt extraction routines. Three salt extraction methods were tested: two methods based on diffusion processes (water immersion under stationary conditions and under mechanical stirring conditions) and one method based on both diffusive and advective processes (multiple packages of sepiolite). The obtained experimental data allowed us to identify strengths and weaknesses of the tested procedures with practical spin-off for archaeologists and restorers (efficiency, kinetics, compatibility with the ceramic substrate, costs and simplicity of use). Salt extraction under mechanical stirring was the most effective method and, for this reason, is suitable for laboratory fieldwork during or immediately after submarine archaeological excavations. Similar advantages are also intended for the preliminary treatments of the most precious findings prior to museum storage.  相似文献   

11.
In recent years, plastics are designated as a source of indoor pollution and particular attention has thus been devoted to the identification of emitting low molecular weight compounds. Headspace-solid phase microextraction-gas chromatography coupled with mass spectrometry (HS-SPME-GC/MS) has been already successfully applied for screening emissions from synthetic materials. This analytical tool being also non-invasive, it has been already successfully applied in the field of cultural heritage science for the identification of volatile organic compounds (VOCs) emitted from various museum objects made of natural materials. In this research, we aimed at assessing the use of HS-SPME-GC/MS as an in situ non-invasive analytical tool for a better knowledge of the volatile organic compounds emitted by plastics in collections. The possibility of characterizing plastics based on their emission signatures was also evaluated. Twelve new standard plastic samples, belonging to seven main polymer families widely present in museum collections as well as three naturally aged museum objects, were investigated. In this paper, we provide a survey of the VOCs emitted, and the use of HS-SPME-GC/MS for identifying volatile marker compounds, degradation products, additives, and monomer residues of the plastic synthesis is evaluated. More than 200 different VOCs were identified from the new standard samples. Two categories of VOCs were distinguished: “non-specific” and “specific” ones. We showed that based on the “specific” VOCs, it was possible to identify the nature of the polymeric matrix itself or at least to unambiguously distinguish a plastic by family. Emissions from the museum objects were then characterised, and main volatile degradation compounds considered as degradation markers of the natural deterioration of polymeric matrices, were identified. This identification procedure could be further exploited for the characterization of VOCs emitted by objects made of multiple synthetic polymers. Complementary to other techniques, this analytical tool is an interesting way to assess the risk for the objects stored in the vicinity of emitting plastics.  相似文献   

12.
Micro-Raman is a spectroscopic technique that allows the identification of painting materials even if finely grained and mixed with others, dispersed in a binder or layered on surfaces. It is used for non-destructive, in situ measurements and it is suitable for selective studies on inhomogeneous materials or surface investigations. Some examples are described of the use of this technique in the field of art conservation and diagnostics, with regard to pigments, dyes and some products of metal alteration. Raman spectra obtained on standard painting materials were arranged in a database and published on the Web.  相似文献   

13.
Salt crystallization is a major cause of damage in porous materials such as stone, brick and ceramics. The paper reports results of an analytical study on tiles of glazed ceramics that are seriously damaged by acetate salt crystallization. Measurements of the ionic composition of the salt mixture in the tiles and in the efflorescences were carried out. Based on the available information on the phase equilibria in the system comprising of the main constituents chloride, nitrate, acetate, calcium and sodium, the crystallization pathways of the various solid phases are traced. It is shown that a combination of qualitative XRD analysis of the phases present in the efflorescences together with a quantitative determination of the ionic composition is sufficient for the quantitative analysis of major crystalline species in the efflorescences, i.e. Ca3(CH3COO)3Cl(NO3)2 · 7H2O, thecotrichite, and NaCl, halite. The concentrations of these salts are obtained from a solution of the mass balance by least squares analysis. Their formation from the salt mixtures present in the tiles that are subject to acetic acid vapor attack is consistent with the solubility diagram of the above mentioned quinary system. Finally, the possibilities of preventive conservation of salt contaminated ceramics in typical museum environments are discussed.  相似文献   

14.
The Oxford University Scanning Proton Microprobe Unit has been responsible for many advances in the field of focused proton beams for analytical microscopy, including being the first to develop the optimized electro-magnetic lenses used to focus high-energy protons to the micron and sub-micron level. This has led to a revolution in using the proton microprobe as an analytical tool for the study of materials. Continuing the tradition of innovation at the Oxford SPM unit, the use of laser ablation to reduce the need for sampling or cleaning of art and archaeological objects, before analysis, is being investigated. Further, information on the makeup of corrosion layers and past conservation treatments is becoming available via this technique.  相似文献   

15.
This paper deals with a possible application of computer vision techniques in the field of Cultural Heritage. These techniques allow an effective integration of data from different sources. Particular consideration will be given to an accurate geometric analysis of the zone under study in order to detect degradation damage in historical building-stone materials. To this end, we employ a computer vision technique, known as the Shape from Shading method, for which a photographic image of the stone material under consideration is the only input data required. By using this method, it is possible to recover, under some constraints, the shape of the three-dimensional surface of the object from the photographic image. In order to improve the results, in this paper, we implement this technique by using an optimization approach which allows a suitable integration of photographic and spatial data, the latter of which is obtained by a topographical device. We outline the potentialities of the method which mainly consist of two relevant capabilities. The first one is the geometric shape reconstruction of the surface material at a resolution much higher than the one allowed by topographical acquisition. The second one is the correction of the lighting-induced distortions in the photographic image. Such a correction is relevant for further image-based analysis of the degradation of the stone material. Experimental results, obtained by using both photographic and spatial data relative to a pudding stone with degradation, are presented and discussed.  相似文献   

16.
ABSTRACT

This article explores the role of editorial playlists in Spotify’s streaming economy. In particular, it approaches Spotify’s playlists as container technologies – i.e. technical solutions that assemble, preserve, and transport music objects and thereby uphold logistical operations within the music industry. Such an approach seeks to complement previous research concerning playlists, which has often analyzed their emotional and affective dimensions but paid less attention to how playlists enhance calculative, mathematical, and logistical retail flows within the online music economy. On the one hand, the article considers how playlists – like containers in general – materialize principles of modularization and automation in ways that enhance control and remote oversight. On the other hand, it discusses how the playlist is far from a perfected means of measurement and control, and sometimes acts as an unruly transport device. Ultimately, the article shows how the playlist format occupies an uneasy position between order and disorder within the digital music economy which has not yet been fully accounted for in the context of music-oriented media studies.  相似文献   

17.
In this paper, I analyze how recent calls to internationalize publication behavior affect research practices at an automotive engineering department in Germany. Automotive engineering is a field with traditionally rather scarce publication activity and strong connections to industry. Substantial authority to define suitable research problems and ways of organizing knowledge production on a daily basis was therefore reserved for local academic elites as well as corporate partners. However, as engineers are increasingly expected to prove their performance through publishing in international peer-reviewed journals, the judgment as to what should be considered “interesting” or “robust” research is partly relegated to a gradually globalizing community of academic peers. This generates a variety of tensions with established ways of coordinating epistemic work at the department studied here. For example, the thematic interests of journals tend to exert a disruptive centrifugal pull in the context of an otherwise highly modular research culture, and possibilities to publish in international venues are unequally distributed across individual research projects. But while department members agree that there is a lack of fit between current practices and new expectations towards their publishing behavior, their opinions about the conclusions that should be drawn differ significantly. Some researchers argue that profound organizational changes are necessary to foster the academic rigor of German engineering research. Others believe that evaluation criteria should simply be adapted. This situation is arguably characteristic for research areas with a traditionally strong orientation to local stakeholders, and it suggests a need for more deliberative, participatory approaches to research evaluation in such fields.  相似文献   

18.
Anti-graffiti protection is becoming a common practice in many urban buildings, especially in areas of social decay. When Cultural Heritage objects are affected by graffiti, the application of anti-graffiti products can result not only in an unsatisfactory result but also in an irreversible damage of an invaluable cost. The materials commonly found in these constructions are very frequently porous and present different types of decay forms. For this reason, the protection of these materials should be carefully considered. This paper proposes a criterion to decide on the suitability and durability of an anti-graffiti product prior to its application in a porous surface of a protected building. Performance classifications are defined for a series of properties including colour and gloss, and hydric and durability properties, and minimum acceptable values or reductions in these properties are recommended.  相似文献   

19.
The influence of the inclination of the fracture plane (with respect to the axis of the bar used for restoration) on the stress and strain fields developed in the restored structural member is explored numerically by employing the Finite Element Method. Attention is focused to marble epistyles fractured into two pieces joined together with the aid of a single threaded titanium bar and suitable cement paste interposed between marble and titanium according to the technique introduced by the scientists working for the restoration of the Acropolis of Athens monuments. The numerical model is calibrated and validated according to experimental results obtained by submitting an accurate copy of a fractured epistyle of the Parthenon Temple (under an 1:3 scale) to bending. The analysis indicated that the inclination between the fracture plane and the axis of the reinforcing bar drastically influences the intensity of the stress field developed even for relatively small inclination angles.  相似文献   

20.
Terrestrial laser scanning technique has represented one of the more advances occurred in the last years in the field of data acquisition. Time-of-Flight (TOF) systems provide a fast and reliable tool to measure millions of 3D points allowing a very effective and dense measurement of the surface geometry. Nowadays, the generation of high quality 3D models is a practice applied to different kind of objects: small or medium size artworks, parts of human body, cars, buildings, civil infrastructures (like dams, bridges, plants, etc.) and whole archaeological sites as well. In most cases, in order to capture the whole object geometry a number of single scans need to be acquired from different positions and then stitched together (i.e. registered each other) to generate the full 3D model. The automatization of the registration of multiple scans acquired from a terrestrial laser scanner (TLS) still represents a very attractive research field. The chance to automatically align several point clouds would reduce processing costs in terms of time and human resources. In addition it would allow even non-specialist users to produce 3D models with good quality. This paper contributes to this research area by presenting a method for the automatic registration of very dense point clouds acquired by TLS systems. The proposed solution is an extension to large datasets of an automatic range data registration procedure we developed a few years ago for the modelling of point clouds acquired with close-range laser scanners. Such procedure, based on the spin-images (SIs) algorithm, has been then improved with the introduction of a multi-resolution method that generates a pyramid of spin-images in order to speed up the matching between adjacent scans. The results we present show that this method can be successfully applied for the automatic registration of high density laser scans of complex and large structures of Cultural Heritage.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号