共查询到20条相似文献，搜索用时 15 毫秒
1.
《Journal of The Franklin Institute》2023,360(4):2678-2701
In this work, we developed a novel active fault-tolerant control (FTC) design scheme for a class of nonlinear dynamic systems subjected simultaneously to modelling imperfections, parametric uncertainties and sensor faults. Modelling imperfections and parametric uncertainties are dealt with using an adaptive radial basis function neural network (RBFNN) that estimates the uncertain part of the system dynamics. For sensor fault estimation (FE), a nonlinear observer based on the estimated dynamics is designed. A scheme to estimate sensor faults in real-time using the nonlinear observer and an additional RBFNN is developed. The convergence properties of the RBFNN, used in the fault FE part, are improved by using a sliding surface function. For FTC design, a sliding surface is designed that incorporates the real-time sensor FE. The resulting sliding mode control (SMC) technique-based FTC law uses the estimated dynamics and real-time sensor FE. A double power-reaching law is adopted to design the switching part of the control law to improve the convergence and mitigate the chattering associated with the SMC. The FTC works well in the presence and absence of sensor faults without the requirement for controller reconfiguration. The stability of the proposed active FTC law is proved using the Lyapunov method. The developed scheme is implemented on a nonlinear simulation of an unmanned aerial vehicle (UAV). The results show good performance of the proposed unified FE and the FTC framework. 相似文献
2.
This paper addresses the problem of adaptive fault estimation and fault-tolerant control for a class of nonlinear non-Gaussian stochastic systems subject to time-varying loss of control effectiveness faults. In this work, time-varying faults, Lipschitz nonlinear property and general stochastic characteristics are taken into consideration in a unified framework. Instead of using the system output signal, the output distribution is adopted for shape control. Both the states and faults are simultaneously estimated by an adaptive observer. Then, a fault tolerant shape controller is designed to compensate for the faults and realize stochastic output distribution tracking. Both the fault estimation and the fault tolerant control schemes are designed based on linear matrix inequality (LMI) technique. Satisfactory performance has been obtained for a numerical simulation example. Furthermore the proposed scheme is successfully tested in a case study of particle size distribution control for an emulsion polymerization reactor. 相似文献
3.
In this paper, a robust actuator fault diagnosis scheme is investigated for satellite attitude control systems subject to model uncertainties, space disturbance torques and gyro drifts. A nonlinear unknown input observer is designed to detect the occurrence of any actuator fault. Subsequently, a bank of adaptive unknown input observers activated by the detection results are designed to isolate which actuator is faulty and then estimate of the fault parameter. Fault isolation is achieved based on the well known generalized observer strategy. The simulation on a closed-loop satellite control system with time-varying or constant actuator faults in the form of additive and multiplicative unknown dynamics demonstrates the effectiveness of the proposed robust fault diagnosis strategy. 相似文献
4.
This paper studies the problem of observer based fast nonsingular terminal sliding mode control schemes for nonlinear non-affine systems with actuator faults, unknown states, and external disturbances. A hyperbolic tangent function based extended state observer is considered to estimate unknown states, which enhances robustness by estimating external disturbance. Then, Taylor series expansion is employed for the non-affine nonlinear system with actuator faults, which transforms it to an affine form system to simplify disturbance observer and controller design. A finite time disturbance observer is designed to address unknown compound disturbances, which includes external disturbances and system uncertainties. A fast nonsingular terminal sliding mode with exponential function sliding mode is proposed to address output tracking. Simulation results show the proposed scheme is effective. 相似文献
5.
《Journal of The Franklin Institute》2022,359(17):9636-9665
This article is dedicated to the issue of asynchronous adaptive observer-based sliding mode control for a class of nonlinear stochastic switching systems with Markovian switching. The system under examination is subject to matched uncertainties, external disturbances, and quantized outputs and is described by a TS fuzzy stochastic switching model with a Markovian process. A quantized sliding mode observer is designed, as are two modes-dependent fuzzy switching surfaces for the error and estimated systems, based on a mode dependent logarithmic quantizer. The Lyapunov approach is employed to establish sufficient conditions for sliding mode dynamics to be robust mean square stable with extended dissipativity. Moreover, with the decoupling matrix procedure, a new linear matrix inequality-based criterion is investigated to synthesize the controller and observer gains. The adaptive control technique is used to synthesize asynchronous sliding mode controllers for error and SMO systems, respectively, so as to ensure that the pre-designed sliding surfaces can be reached, and the closed-loop system can perform robustly despite uncertainties and signal quantization error.Finally, simulation results on a one-link arm robot system are provided to show potential applications as well as validate the effectiveness of the proposed scheme. 相似文献
6.
《Journal of The Franklin Institute》2019,356(13):7112-7143
This paper addresses the problem of robust integrated fault estimation (FE) and fault-tolerant control (FTC) for a class of discrete-time networked Takagi–Sugeno (T–S) fuzzy systems with two-channel event-triggered schemes, input quantization and incomplete measurements. The incomplete information under consideration includes randomly occurring sensor saturation and randomly occurring quantization. In order to save the limited networked resources, this paper firstly proposed a novel dynamic event-triggered scheme on the sensor side and a static one on the controller side. Secondly, an event-triggered FE observer for the T–S fuzzy model is designed to estimate actuator faults and system states, simultaneously. Then, a specified discrete sliding surface in the state-estimation space is constructed. By using time-delay analysis technique and considering the effects of event-triggered scheme, quantization, networked conditions, actuator fault and external disturbance, the sliding mode dynamics and error dynamics are unified into a new networked time-delay model. Based on this model, sufficient conditions are established such that the resulting augmented fuzzy system is stochastically stable with a prescribed H∞ performance level with a single-step linear matrix inequality (LMI) formulation. Furthermore, an observer-based sliding mode controller for reaching motion is synthesized to guarantee the reachability of the sliding surface. Finally, a single-link flexible manipulator example is present to illustrate the effectiveness of the proposed method. 相似文献
7.
8.
9.
In this paper, we consider output tracking for a class of MIMO nonlinear systems which are composed of coupled subsystems with vast mismatched uncertainties. First, all uncertainties influencing the performance of controlled outputs, which include internal unmodelled dynamics, external disturbances, and uncertain nonlinear interactions between subsystems, are refined into the total disturbance in the control channels of subsystems. The total disturbance is shown to be sufficiently reflected in the measured output of each subsystem so that it can be estimated in real time by an extended state observer (ESO) in terms of the measured outputs. Second, we decouple approximately the MIMO systems by cancelling the total disturbance based on ESO estimation so that each subsystem becomes approximately independent linear time invariant one without uncertainty and interaction with other subsystems. Finally, we design an ESO based output feedback for each subsystem separately to ensure that the closed-loop state is bounded, and the closed-loop output of each subsystem tracks practically a given reference signal. This is completely in comply with the spirit of active disturbance rejection control (ADRC). Some numerical simulations are presented to demonstrate the effectiveness of the proposed output feedback control scheme. 相似文献
10.
Oscar Barambones José A. Cortajarena Isidro Calvo José M. Gonzalez de Durana Patxi Alkorta Ali Karami-Mollaee 《Journal of The Franklin Institute》2021,358(11):5795-5819
The introduction of advanced control algorithms may improve considerably the efficiency of wind turbine systems. This work proposes a high order sliding mode (HOSM) control scheme based on the super twisting algorithm for regulating the wind turbine speed in order to obtain the maximum power from the wind. A robust aerodynamic torque observer, also based on the super twisting algorithm, is included in the control scheme in order to avoid the use of wind speed sensors. The presented robust control scheme ensures good performance under system uncertainties avoiding the chattering problem, which may appear in traditional sliding mode control schemes. The stability analysis of the proposed HOSM observer is provided by means of the Lyapunov stability theory. Experimental results show that the proposed control scheme, based on HOSM controller and observer, provides good performance and that this scheme is robust with respect to system uncertainties and external disturbances. 相似文献
11.
This paper proposes a new sliding mode observer for fault reconstruction, applicable for a class of linear parameter varying (LPV) systems. Observer schemes for actuator and sensor fault reconstruction are presented. For the actuator fault reconstruction scheme, a virtual system comprising the system matrix and a fixed input distribution matrix is used for the design of the observer. The fixed input distribution matrix is instrumental in simplifying the synthesis procedure to create the observer gains to ensure a stable closed-loop reduced order sliding motion. The ‘output error injection signals’ from the observer are used as the basis for reconstructing the fault signals. For the sensor fault observer design, augmenting the LPV system with a filtered version of the faulty measurements allows the sensor fault reconstruction problem to be posed as an actuator fault reconstruction scenario. Simulation tests based on a high-fidelity nonlinear model of a transport aircraft have been used to demonstrate the proposed actuator and sensor FDI schemes. The simulation results show their efficacy. 相似文献
12.
13.
In this paper, the actuator fault diagnosis problem for a class of bilinear systems with uncertainty is discussed. The system is transformed into two different subsystems. One is not affected by actuator fault, so an adaptive observer can be designed such that, under certain conditions, the observer error dynamics is stable. The other whose states can be measured is affected by the faults. The observation scheme is then used for model-based fault diagnosis. Finally, an example of a semiactive suspension system is used to illustrate the applicability of the proposed method. 相似文献
14.
This paper deals with the fault tolerant control (FTC) design for a Vertical Takeoff and Landing (VTOL) aircraft subject to external disturbances and actuator faults. The aim is to synthesize a fault tolerant controller ensuring trajectory tracking for the nonlinear uncertain system represented by a Takagi–Sugeno (T–S) model. In order to design the FTC law, a proportional integral observer (PIO) is adopted which estimate both of the faults and the faulty system states. Based on the Lyapunov theory and ?2 optimization, the trajectory tracking performance and the stability of the closed loop system are analyzed. Sufficient conditions are obtained in terms of linear matrix inequalities (LMI). Simulation results show that the proposed controller is robust with respect to uncertainties on the mechanical parameters that characterize the model and secures global convergence. 相似文献
15.
Liguo Qin Xiao He Rui Yan Ruiliang Deng Donghua Zhou 《Journal of The Franklin Institute》2019,356(2):791-818
In the paper, a distributed sensor fault detection and isolation scheme is presented for a network of second-order integrators. A new distributed control law is developed to achieve formation of the system. By using the integration information of distributed formation errors, the control law improves the robustness of the formation. A distributed observer is then designed in each vehicle based on the closed-loop dynamic model of the vehicle. Each vehicle updates the states of the distributed observer by employing the measurements of itself and the transmitted state estimations from its neighbors. Based on the distributed observer, a distributed fault detection observer and a distributed fault isolation observer are designed. The presented distributed fault detection observer in each vehicle is able to be sensitive to the faults of all vehicles in the system. By using the distributed fault isolation observers, each vehicle is able to be sensitive to the faults of itself, its neighbors and its neighbors’ neighbors and to be robust to the faults of other vehicles. Although the fault isolation of the proposed scheme is simple, computation loads of the scheme are lower than the current ones since only the model of the individual vehicle is used. Finally, the effectiveness of the control law and the fault diagnosis scheme is demonstrated by simulations and real-time experiments carried out based on a formation of three quadrotors. 相似文献
16.
Yingchun Wang Longfei Zheng Huaguang Zhang Xiangpeng Xie 《Journal of The Franklin Institute》2018,355(17):8392-8411
This paper investigates the problem of event-triggered fault detection filter design for nonlinear networked control systems with both sensor faults and process faults. First, Takagi–Sugeno (T–S) fuzzy model is utilized to represent the nonlinear systems with faults and disturbances. Second, a discrete event-triggered communication scheme is proposed to reduce the utilization of limited network bandwidth between filter and original system. At the same time, considering network-induced delays and event-triggered scheme, a novel T–S fuzzy fault detection filter is constructed to generate a residual signal, which has nonsynchronous premise variables with the original T–S fuzzy system. Then, the fuzzy Lyapunov functional based approach and the reciprocally convex approach are developed such that the obtained sufficient conditions ensure that the fuzzy fault detection system is asymptotically stable with H∞ performance and is less conservative. All the conditions are given in terms of linear matrix inequalities (LMIs), which can be solved by LMI tools in MATLAB environment. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed results. 相似文献
17.
18.
This paper addresses the problem of designing a state observer for a class of nonlinear discrete-time systems using the dissipativity theory. We show that the dissipative observation methodology, originally proposed by one of the authors for continuous-time nonlinear systems, can be extended to the discrete-time case. For constructing a convergent observer, the methodology is applied to the nonlinear estimation error dynamics, which is decomposed into a discrete-time Linear Time-Invariant (LTI) subsystem in the forward loop, connected to a time-varying static nonlinearity in the feedback loop. In order to assure asymptotic stability of the closed-loop, complementary dissipativity conditions are imposed on each of the subsystems: (i) the static nonlinearity is required to be dissipative with respect to a quadratic supply rate, and (ii) the observer gains are designed such that the LTI system is dissipative with respect to a complementary supply rate. As in the continuous time framework, the proposed method includes as special cases, unifies and generalizes some observer design methods proposed previously in the literature. A great advantage of the Dissipative Observer Design Method proposed here is that it leads to Matrix Inequalities for the design of the observer gains, and these can be usually converted into Linear Matrix Inequalities (LMI’s). The results are illustrated using Chua’s Chaotic system. 相似文献
19.
This paper is concerned with the problem of observer design for a class of discrete-time Lipschitz nonlinear state delayed systems with, or without parameter uncertainty. The nonlinearities are assumed to appear in both the state and measured output equations. For both the cases with and without norm-bounded time-varying parameter uncertainties, a design method is proposed, which involves solving a linear matrix inequality (LMI). When a certain LMI is satisfied, the explicit expression of a desired nonlinear observer is also presented. An example is provided to demonstrate the applicability of the proposed approach. 相似文献
20.
A sliding mode observer in the presence of sampled output information and its application to robust fault reconstruction is studied. The observer is designed by using the delayed continuous-time representation of the sampled-data system, for which sufficient conditions are given in the form of linear matrix inequalities (LMIs) to guarantee the ultimate boundedness of the error dynamics. Though an ideal sliding motion cannot be achieved in the observer when the outputs are sampled, ultimately bounded solutions can be obtained provided the sampling frequency is fast enough. The bound on the solution is proportional to the sampling interval and the magnitude of the switching gain. The proposed observer design is applied to the problem of fault reconstruction under sampled outputs and system uncertainties. It is shown that actuator or sensor faults can be reconstructed reliably from the output error dynamics. An example of observer design for an inverted pendulum system is used to demonstrate the merit of the proposed methodology compared to existing sliding mode observer design approaches. 相似文献