首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Since clubface orientation at impact affects ball direction and ball spin, the ability to control clubface orientation is one of the most important skills for golfers. This study presents a new method to describe clubface orientation as a function of the clubshaft motions (i.e., swing plane orientation, clubshaft angle in the swing plane, and clubshaft rolling angle) during a golf swing and investigates the relationships between the clubshaft motions and clubface orientation at impact. The club motion data of driver shots were collected from eight skilled golfers using a three-dimensional motion capture system. The degrees of influence of the clubshaft motions on the clubface orientation were investigated using sensitivity analysis. The sensitivity analysis revealed that the swing plane horizontal angle affected the clubface horizontal angle to an extent of 100%, that the clubshaft angle in the swing plane affected both the clubface vertical and horizontal angles to extents of 74 and 68%, respectively, and that the clubshaft rolling angle affected both the clubface vertical and horizontal angles to extents of -67 and 75%, respectively. Since the method presented here relates clubface orientation to clubshaft motions, it is useful for understanding the clubface control of a golfer.  相似文献   

2.
Previous research indicates that the motion of the golf club is not planar and that the plane traced out by the club is different than that of the golfer's hands. The aim of the present study was to investigate how the position of the club, relative to the golfer's swing plane, influences the motion of the club by using a four-segment (torso, upper arm, forearm, and club), three-dimensional forward dynamics model. A genetic algorithm optimized the coordination of the model's four muscular torque generators to produce the best golf swings possible under six different conditions. The series of simulations were designed to demonstrate the effect of positioning the club above, and below, the golfer's swing plane as well as the effect of changing the steepness of the golfer's swing plane. The simulation results suggest that positioning the club below the golfer's swing plane, early in the downswing, will facilitate the squaring of the clubface for impact, while positioning the club above the plane will have the opposite effect. It was also demonstrated that changing the steepness of the golfer's swing plane by 10 degrees can have little effect on the delivery of the clubhead to the ball.  相似文献   

3.
The aim of this review was to determine how the findings of biomechanics and motor control/learning research may be used to improve golf performance. To be eligible, the biomechanics and motor learning studies had to use direct (ball displacement and shot accuracy) or indirect (clubhead velocity and clubface angle) golf performance outcome measures. Biomechanical studies suggested that reducing the radius path of the hands during the downswing, increasing wrist torque and/or range of motion, delaying wrist motion to late in the downswing, increasing downswing amplitude, improving sequential acceleration of body parts, improving weight transfer, and utilising X-factor stretch and physical conditioning programmes can improve clubhead velocity. Motor learning studies suggested that golf performance improved more when golfers focused on swing outcome or clubhead movement rather than specific body movements. A distributed practice approach involving multiple sessions per week of blocked, errorless practice may be best for improving putting accuracy of novice golfers, although variable practice may be better for skilled golfers. Video, verbal, or a combination of video and verbal feedback can increase mid-short iron distance in novice to mid-handicap (hcp) golfers. Coaches should not only continue to critique swing technique but also consider how the focus, structure, and types of feedback for practice may alter learning for different groups of golfers.  相似文献   

4.
Effects of fatigue on golf performance   总被引：1，自引：0，他引：1  
The purpose of this study was to determine if body position, weight transfer, and/or pelvis/trunk rotations changed as a result of a golf specific fatiguing protocol and whether these changes affected resultant club head velocity at impact and shot consistency. Six male golfers and one female golfer participated in the study, who had a mean age, height, and body mass of 23.9 +/- 3.9 years, 177.4 +/- 4.9 cm, and 75.3 +/- 9.9 kg, respectively. Path analysis was used to determine the relationships between fatigue, biomechanical variables, and resultant club head velocity at impact and shot consistency. In the statistical models representing the effects of biomechanical variables calculated at the top of the swing and ball contact, golf specific fatigue was associated with a 2.0% and 2.5% reduction in the club head velocity and a 7.1% and 9.4% improvement in the shot consistency, respectively. These data suggest that golf specific fatigue was not related to the initial lower body sagittal plane angles at address nor was simulated golf specific fatigue related to peak transverse plane pelvis and trunk rotational velocities (or their timings) in a manner that indicates a relationship to resultant club head velocity and shot consistency.  相似文献   

5.
The purpose of this paper was to examine whether the ball position and wrist action (different types of torque application) could be optimised to increase the horizontal golf club head speed at impact with the ball. A two-dimensional double pendulum model of the golf downswing was used to determine to what extent the wrist action affected the club head speed in a driver, and how this affected the optimum ball position. Three different patterns of wrist actions (negative, positive, and negative-positive torque at the wrist) were investigated; and two criteria (maximum and impact criteria) were used to assess their effectiveness in terms of the maximum horizontal club head speed, and the club head speed as the shaft becomes vertical when viewed ‘face-on’. The simulation results indicated that the horizontal club head speed at impact could be increased by these patterns of wrist actions and the optimum ball position could be determined by the impact criterion. Based on the analysis of the energy flow from the input joints of shoulder and wrist to the arm and club head, the way the wrist action affects the club head speed has been discussed. The sensitivity of the results to small changes in model parameter values and initial conditions was investigated. The results were also examined under different torque patterns.  相似文献   

6.
Abstract

Although the golf coaching literature stresses the importance of weight transfer during the swing, research has been conflicting or lacking statistical support. A potential problem with previous studies is that no attempt was made to account for different movement strategies in the golf swing. This study evaluated the relationship between centre of pressure measures and club head velocity within two previously identified swing styles, the “Front Foot” and “Reverse” styles. Thirty-nine Front Foot golfers and 19 Reverse golfers performed swings with a driver while standing on two force plates. From the force plate data, centre of pressure displacement, velocity, range, and timing parameters were calculated. Correlation and regression analysis indicated that a larger range of centre of pressure and a more rapid centre of pressure movement in the downswing was associated with a larger club head velocity at ball contact for the Front Foot group. For the Reverse golfers, positioning the centre of pressure further from the back foot at late backswing and a more rapid centre of pressure transfer towards the back foot at ball contact was associated with a larger club head velocity at ball contact. This study has highlighted the importance of identifying different movement strategies before evaluating performance measures, as different parameters were found to be important for the Front Foot and Reverse styles.  相似文献   

7.
Most previous research on golf swing mechanics has focused on the driver club. The aim of this study was to identify the kinematic factors that contribute to greater hitting distance when using the 5 iron club. Three-dimensional marker coordinate data were collected (250 Hz) to calculate joint kinematics at eight key swing events, while a swing analyser measured club swing and ball launch characteristics. Thirty male participants were assigned to one of two groups, based on their ball launch speed (high: 52.9 ± 2.1 m · s(-1); low: 39.9 ± 5.2 m · s(-1)). Statistical analyses were used to identify variables that differed significantly between the two groups. Results showed significant differences were evident between the two groups for club face impact point and a number of joint angles and angular velocities, with greater shoulder flexion and less left shoulder internal rotation in the backswing, greater extension angular velocity in both shoulders at early downswing, greater left shoulder adduction angular velocity at ball contact, greater hip joint movement and X Factor angle during the downswing, and greater left elbow extension early in the downswing appearing to contribute to greater hitting distance with the 5 iron club.  相似文献   

8.
It is believed that increasing the X-factor (movement of the shoulders relative to the hips) during the golf swing can increase ball velocity at impact. Increasing the X-factor may also increase the risk of low back pain. The aim of this study was to provide recommendations for the three-dimensional (3D) measurement of the X-factor and lower trunk movement during the golf swing. This three-part validation study involved; (1) developing and validating models and related algorithms (2) comparing 3D data obtained during static positions representative of the golf swing to visual estimates and (3) comparing 3D data obtained during dynamic golf swings to images gained from high-speed video. Of particular interest were issues related to sequence dependency. After models and algorithms were validated, results from parts two and three of the study supported the conclusion that a lateral bending/flexion-extension/axial rotation (ZYX) order of rotation was deemed to be the most suitable Cardanic sequence to use in the assessment of the X-factor and lower trunk movement in the golf swing. The findings of this study have relevance for further research examining the X-factor its relationship to club head speed and lower trunk movement and low back pain in golf.  相似文献   

9.
Weight transfer has been identified as important in group-based analyses. The aim of this study was to extend this work by examining the importance of weight transfer in the golf swing on an individual basis. Five professional and amateur golfers performed 50 swings with the driver, hitting a ball into a net. The golfer's centre of pressure position and velocity, parallel with the line of shot, were measured by two force plates at eight swing events that were identified from high-speed video. The relationships between these parameters and club head velocity at ball contact were examined using regression statistics. The results did support the use of group-based analysis, with all golfers returning significant relationships. However, results were also individual-specific, with golfers returning different combinations of significant factors. Furthermore, factors not identified in group-based analysis were significant on an individual basis. The most consistent relationship was a larger weight transfer range associated with a larger club head velocity (p < 0.05). All golfers also returned at least one significant relationship with rate of weight transfer at swing events (p < 0.01). Individual-based analysis should form part of performance-based biomechanical analysis of sporting skills.  相似文献   

10.
The purpose of this study was to evaluate possible effects of synchronized metronome training (SMT) on movement dynamics during golf-swing performance, as captured by kinematic analysis. A one-group, between-test design was applied on 13 male golfers (27.5 ± 4.6 years old, 12.7 ± 4.9 handicap) who completed 12 sessions of SMT over a four-week period. Pre- and post-assessments of golf swings with three different clubs (4-iron, 7-iron, and pitching wedge) were performed using a three-dimensional motion capture system. Club velocity at three different swing phases (backswing, downswing, and follow-through) was measured and cross-correlation analysis of time-series signals were made on joint couplings (wrist–elbow–shoulder) of both arms, and between joints and the club, during the full golf swing. There were significantly higher cross-correlations between joint-couplings and concomitant changes of the associated phase-shift differences, as well as reduced phase-shift variability at post-test. No significant effect of SMT was found for the club velocities. We suggest that domain-general influences of SMT on the underlying brain-based motor control strategies lead to a more coordinated movement pattern of the golf-swing performance, which may explain previous observations of significantly improved golf-shot accuracy and decreased variability after SMT.  相似文献   

11.
The purpose of this study was to construct and evaluate the reliability of an apparatus for testing golf putters with respect to distance and direction deviation at different impact points on the clubface. An apparatus was constructed based on the pendulum principle that allowed putter golf clubs to swing at different speeds. The mean speed of the club head before ball impact, and of the ball after impact, was calculated from time measurements with photocells. A pin profile rig was used to determine the directional deviation of the golf ball. Three different putters were used in the study, two that are commercially available (toe-heel weighted and mallet types) and one specially made (wing-type) putter. The points of impact were the sweet spot (as indicated by the manufacturer's aim line), and 1, 2 and 3 cm to the left and right of the sweet spot. Calculation of club head speed before impact, and of ball speed after impact (proportional to distance), showed errors < or = 0.5% of interval duration. The variability in ball impacts was tested by measuring time and direction deviations during 50 impacts on the same ball. The mean duration (+/- s) after ball impact in the test interval (1.16 m long) was 206 (0.8) ms and the standard deviation in the perpendicular spreading of the balls in relation to the direction of the test interval was 0.005 m. A test-retest of one putter on two consecutive days after remounting of the putter on the test apparatus showed less than 1% difference in distance deviation. We conclude that the test apparatus enables a precise recording of distance and direction deviation in golf putters as well as comparisons between different putters. The apparatus and set-up can be used in the laboratory as well as outdoors on the putting green.  相似文献   

12.
A new golf-swing robot that included a feed-forward controller in the shoulder joint and a passive wrist joint was suggested in previous studies to more closely model a skilful golfer. In this study, multiple modulation torque planning for a new golf-swing robot that is capable of modelling a skilful golfer’s swing with a delayed wrist turn was analytically examined. The twostep modulation torque included the effects of whole-body motion on shoulder acceleration, which improved the efficiency index of the swing motion and the club head speed at impact with a correctly timed wrist turn. In addition, it was demonstrated that the optimum moment of inertia and optimum design of club shaft rigidity for several types of golfers could be determined by torque planning in a virtual performance test.  相似文献   

13.
Although the golf coaching literature stresses the importance of weight transfer during the swing, research has been conflicting or lacking statistical support. A potential problem with previous studies is that no attempt was made to account for different movement strategies in the golf swing. This study evaluated the relationship between centre of pressure measures and club head velocity within two previously identified swing styles, the "Front Foot" and "Reverse" styles. Thirty-nine Front Foot golfers and 19 Reverse golfers performed swings with a driver while standing on two force plates. From the force plate data, centre of pressure displacement, velocity, range, and timing parameters were calculated. Correlation and regression analysis indicated that a larger range of centre of pressure and a more rapid centre of pressure movement in the downswing was associated with a larger club head velocity at ball contact for the Front Foot group. For the Reverse golfers, positioning the centre of pressure further from the back foot at late backswing and a more rapid centre of pressure transfer towards the back foot at ball contact was associated with a larger club head velocity at ball contact. This study has highlighted the importance of identifying different movement strategies before evaluating performance measures, as different parameters were found to be important for the Front Foot and Reverse styles.  相似文献   

14.
目的:从生物力学角度探究声音反馈训练(teaching with acoustical guidance,TAGteachTM)和传统训练方法对高尔夫初学者击球效果和挥杆动作的影响。方法:21名无高尔夫训练基础的大学生受试者随机分为声音反馈训练组(clicker training group,CG,n=11)和传统训练组(traditional training group,TG,n=10),由一名韩国职业高尔夫教练员进行5周的高尔夫挥杆动作教学训练,使用7号铁杆。训练后,对受试进行挥杆动作生物力学测试,对比两组受试者的击球效果和挥杆动作。结果:5周声音反馈训练后,CG杆速、球速、杆面角度、击球距离等击球表现指标显著优于TG(P<0.01)。挥杆动作方面,CG从上杆阶段到随挥初期挥杆时间显著小于TG(P<0.05),骨盆转动速度显著大于TG(P<0.05);CG骨盆转动角度和COM-COP倾角的标准化角加速度变化率显著小于TG(P<0.05)。结论:声音反馈是一种有效的训练辅助手段,可提升高尔夫初学者的挥杆练习效果。  相似文献   

15.
Teaching and playing professionals offer multiple theories concerning the manner in which forces should be applied to the handle of the club during the golf swing. This study extends recent research concerning grip pressures and forces in golf, with the purpose of exploring the similarities and differences between force profiles for a 7-iron and driver swung by proficient golfers. A secondary purpose was to further analyze the way that golfers use grip forces to manipulate the club. Grip forces were measured on eight low handicap golfers (USGA indexes 0 to 7) swinging their own 7-irons and drivers. In total, lead-hand and trail-hand grip forces were isolated as well as anatomically specific forces within the hands. Force profile variability across multiple swings for each golfer and between golfers characterized consistencies and important differences. Correlations between 7-iron and driver force profiles characterized force ‘signatures.’ The data highlight large fluctuations in grip forces during the swing. Marked differences between participants were observed, involving force magnitudes and phasing. Dominant forces arose primarily from the lead hand, specifically the last three fingers. Force profiles were highly repeatable across swings for a golfer (standard deviations < 7% of total force) and force profile correlations between 7-iron and driver for a golfer were remarkably high (r2 = 0.86). Notably, within swing force variability was greatest during club acceleration, but dramatically decreased at impact.  相似文献   

16.
The golfer’s body (trunk/arms/club) can be modeled as an inclined axle-chain system and the rotations of its parts observed on the functional swing plane (FSP) can represent the actual angular motions closely. The purpose of this study was to investigate the effects of pelvis-shoulders torsional separation style on the kinematic sequences employed by the axle-chain system in golf driving. Seventy-four male skilled golfers (handicap ≤ 3) were assigned to five groups based on their shoulder girdle motion and X-factor stretch characteristics: Late Shoulder Acceleration, Large Downswing Stretch, Large Backswing Stretch, Medium Total Stretch, and Small Total Stretch. Swing trials were captured by an optical system and the hip-line, thorax, shoulder-line, upper-lever, club, and wrist angular positions/velocities were calculated on the FSP. Kinematic sequences were established based on the timings of the peak angular velocities (backswing and downswing sequences) and the backswing-to-downswing transition time points (transition sequence). The backswing and transition sequences were somewhat consistent across the groups, showing full or partial proximal-to-distal sequences with minor variations. The downswing sequence was inconsistent across the groups and the angular velocity peaks of the body segments were not significantly separated. Various swing characteristics associated with the separation styles influenced the motion sequences.  相似文献   

17.
It is believed that increasing the X-factor (movement of the shoulders relative to the hips) during the golf swing can increase ball velocity at impact. Increasing the X-factor may also increase the risk of low back pain. The aim of this study was to provide recommendations for the three-dimensional (3D) measurement of the X-factor and lower trunk movement during the golf swing. This three-part validation study involved; (1) developing and validating models and related algorithms (2) comparing 3D data obtained during static positions representative of the golf swing to visual estimates and (3) comparing 3D data obtained during dynamic golf swings to images gained from high-speed video. Of particular interest were issues related to sequence dependency. After models and algorithms were validated, results from parts two and three of the study supported the conclusion that a lateral bending/flexion-extension/axial rotation (ZYX) order of rotation was deemed to be the most suitable Cardanic sequence to use in the assessment of the X-factor and lower trunk movement in the golf swing. The findings of this study have relevance for further research examining the X-factor its relationship to club head speed and lower trunk movement and low back pain in golf.  相似文献   

18.
It is unknown whether skilled golfers will modify their kinematics when using drivers of different shaft properties. This study aimed to firstly determine if golf swing kinematics and swing parameters and related launch conditions differed when using modified drivers, then secondly, determine which kinematics were associated with clubhead speed. Twenty high level amateur male golfers (M ± SD: handicap = 1.9 ± 1.9 score) had their three-dimensional (3D) trunk and wrist kinematics collected for two driver trials. Swing parameters and related launch conditions were collected using a launch monitor. A one-way repeated measures ANOVA revealed significant (p ≤ 0.003) between driver differences; specifically, faster trunk axial rotation velocity and an early wrist release for the low kick point driver. Launch angle was shown to be 2° lower for the high kick point driver. Regression models for both drivers explained a significant amount of variance (60–67%) in clubhead speed. Wrist kinematics were most associated with clubhead speed, indicating the importance of the wrists in producing clubhead speed regardless of driver shaft properties.  相似文献   

19.
Abstract

The purpose of this study was to construct and evaluate the reliability of an apparatus for testing golf putters with respect to distance and direction deviation at different impact points on the clubface. An apparatus was constructed based on the pendulum principle that allowed putter golf clubs to swing at different speeds. The mean speed of the club head before ball impact, and of the ball after impact, was calculated from time measurements with photocells. A pin profile rig was used to determine the directional deviation of the golf ball. Three different putters were used in the study, two that are commercially available (toe-heel weighted and mallet types) and one specially made (wing-type) putter. The points of impact were the sweet spot (as indicated by the manufacturer's aim line), and 1, 2 and 3 cm to the left and right of the sweet spot. Calculation of club head speed before impact, and of ball speed after impact (proportional to distance), showed errors ≤ 0.5% of interval duration. The variability in ball impacts was tested by measuring time and direction deviations during 50 impacts on the same ball. The mean duration (± s) after ball impact in the test interval (1.16 m long) was 206 (0.8) ms and the standard deviation in the perpendicular spreading of the balls in relation to the direction of the test interval was 0.005 m. A test – retest of one putter on two consecutive days after remounting of the putter on the test apparatus showed less than 1% difference in distance deviation. We conclude that the test apparatus enables a precise recording of distance and direction deviation in golf putters as well as comparisons between different putters. The apparatus and set-up can be used in the laboratory as well as outdoors on the putting green.  相似文献   

20.
The golf swing has been modelled as a planar movement, but recent findings suggest that the upper limbs and golf club do not move in a single plane. However, the idea that the club alone can be swung in a single inclined plane has not been investigated mathematically. The aims of this study were to determine whether a single plane could be fitted to club motion, and if this plane varied for different clubs. Ten golfers (handicap 1-5) performed repeated, consistent swings with three clubs (driver, 5-iron, and pitching wedge). The motion of each club during the downswing was fitted to a single plane. The fit of the plane varied between golfers and clubs (r(2) = 0.871-0.995, root mean square residual = 44.9-166.2 mm). Mean angles of the plane to the reference horizontal Z axis (driver: 125.5 degrees , s = 3.0; 5-iron: 117.1 degrees , s = 3.0; wedge: 113.6 degrees , s = 2.7) and target line axis (driver: -7.8 degrees , s = 5.9; 5-iron: -4.9 degrees , s = 5.7; wedge: -5.9 degrees , s = 6.0) were significantly (P < 0.05) different. Further analysis revealed a single plane was more appropriate for some participants than others, but that it might be neither desirable nor possible in some cases.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号