共查询到20条相似文献，搜索用时 31 毫秒
1.
《Electronic Journal of Biotechnology》2014,17(3):122-125
BackgroundA biosurfactant produced by Pseudomonas aeruginosa cultivated in a low-cost medium formulated with 2.5% vegetable oil refinery residue and 2.5% corn steep liquor and distilled water was employed to stabilize silver nanoparticles in the liquid phase. The particles were initially synthesized using NaBH4 as reducing agent in biosurfactant reverse micelles and were extracted from the micellar solution to disperse in heptane.ResultsA silver particle size in the range of 1.13 nm was observed. The UV–vis absorption spectra proposed that silver nanoparticles could be formed in the reverse micelles and relatively stabilized for at least 3 months without passivator addition. The Transmission Electron Microscope (TEM) shows that the silver nanoparticles are of spherical form and relatively uniform.ConclusionsThis process provided a simpler route for nanoparticle synthesis compared to existing systems using whole organisms or partially purified biological extracts, showing that the low-cost biosurfactant can be used for nanoparticle synthesis as a non-toxic and biodegradable stabilizing agent. 相似文献
2.
BackgroundBiomineralization is a significant process performed by living organisms in which minerals are produced through the hardening of biological tissues. Herein, we focus on calcium carbonate precipitation, as part of biomineralization, to be used in applications for environmental protection, material technology, and other fields. A strain GM-1, Microbacterium sp. GM-1, isolated from active sludge, was investigated for its ability to produce urease and induce calcium carbonate precipitation in a metabolic process.ResultsIt was discovered that Microbacterium sp. GM-1 resisted high concentrations of urea up to 60 g/L. In order to optimize the calcification process of Microbacterium sp. GM-1, the concentrations of Ni2 + and urea, pH value, and culture time were analyzed through orthogonal tests. The favored calcite precipitation culture conditions were as follows: the concentration of Ni2 + and urea were 50 μM and 60 g/L, respectively, pH of 10, and culture time of 96 h. Using X-ray diffraction analysis, the calcium carbonate polymorphs produced by Microbacterium sp. GM-1 were proven to be mainly calcite.ConclusionsThe results of this research provide evidence that Microbacterium sp. GM-1 can biologically induce calcification and suggest that strain GM-1 may play a potential role in the synthesis of new biominerals and in bioremediation or biorecovery. 相似文献
3.
BackgroundThis paper presents micro- and nano-fabrication techniques for leachable realgar using the extremophilic bacterium Acidithiobacillus ferrooxidans (A. ferrooxidans) DLC-5.ResultsRealgar nanoparticles of size ranging from 120 nm to 200 nm were successfully prepared using the high-energy ball mill instrument. A. ferrooxidans DLC-5 was then used to bioleach the particles. The arsenic concentration in the bioleaching system was found to be increased significantly when compared with that in the sterile control. Furthermore, in the comparison with the bioleaching of raw realgar, nanoparticles could achieve the same effect with only one fifth of the consumption.ConclusionEmphasis was placed on improving the dissolvability of arsenic because of the great potential of leachable realgar drug delivery in both laboratory and industrial settings.How to cite: Xu R, Song P, Wang J, et al. Bioleaching of realgar nanoparticles using the extremophilic bacterium Acidithiobacillus ferrooxidans DLC. Electron J Biotechnol 2019;38. https://doi.org/10.1016/j.ejbt.2019.01.001. 相似文献
4.
BackgroundAlthough nanoparticles (NPs) have many advantages, it has been proved that they may be absorbed by and have toxic effects on the human body. Recent research has tried to evaluate and compare the nanotoxicity of gold nanoparticles (AuNPs) produced by two types of microorganisms in vitro by two different methods. AuNPs were produced by Bacillus cereus and Fusarium oxysporum, and their production was confirmed by visible spectral, transmission electron microscope, and X-ray diffraction (XRD) analyses. The human fibroblast cell line CIRC-HLF was treated with AuNPs, and the induced nanotoxicity was measured using direct microscopic and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays.ResultsThe results showed that the produced AuNPs had a maximum absorbance peak around 510–530 nanometer (nm), with spherical, hexagonal, and octagonal shapes and average sizes around 20–50 nm. The XRD results confirmed the presence of GNPs in the microbial culture supernatants. An MTT assay showed that GNPs had dose-dependent toxic effects, and microscopic analysis showed that GNPs induced cell abnormalities in doses lower than the determined half-maximal inhibitory concentrations (IC50s).ConclusionsIn conclusion, the biologically produced AuNPs had toxic effects in the cell culture, and direct techniques such as microscopic evaluation instead of indirect methods such as MTT assay were more useful for assessing the nanotoxicity of the biologically produced AuNPs. Thus, the use of only MTT assay for nanotoxicity evaluation of AuNPs is not desirable. 相似文献
5.
BackgroundLXYL-P1-2 is the first reported glycoside hydrolase that can catalyze the transformation of 7-β-xylosyl-10-deacetyltaxol (XDT) to 10-deacetyltaxol (DT) by removing the d-xylosyl group at the C-7 position. Successful synthesis of paclitaxel by one-pot method combining the LXYL-P1-2 and 10-deacetylbaccatin III-10-β-O-acetyltransferase (DBAT) using XDT as a precursor, making LXYL-P1-2 a highly promising enzyme for the industrial production of paclitaxel. The aim of this study was to investigate the catalytic potential of LXYL-P1-2 stabilized on magnetic nanoparticles, the surface of which was modified by Ni2+-immobilized cross-linked Fe3O4@Histidine.ResultsThe diameter of matrix was 20–40 nm. The Km value of the immobilized LXYL-P1-2 catalyzing XDT (0.145 mM) was lower than that of the free enzyme (0.452 mM), and the kcat/Km value of immobilized enzyme (12.952 mM s−1) was higher than the free form (8.622 mM s−1). The immobilized form maintained 50% of its original activity after 15 cycles of reuse. In addition, the stability of immobilized LXYL-P1-2, maintained 84.67% of its initial activity, improved in comparison with free form after 30 d storage at 4°C.ConclusionsThis investigation not only provides an effective procedure for biocatalytic production of DT, but also gives an insight into the application of magnetic material immobilization technology.How to citeZou S, Chen TJ, Li DY, et al. LXYL-P1-2 immobilized on magnetic nanoparticles and its potential application in paclitaxel production. Electron J Biotechnol 2021;50.https://doi.org/10.1016/j.ejbt.2020.12.005 相似文献
6.
BackgroundXylitol is a five carbons polyol with promising medical applications. It can be obtained from chemical d-xylose reduction or by microbial fermentation of Sugarcane Bagasse Hemicellulosic Hydrolysate. For this last process, some microbial inhibitors, as furfural, constitute severe bottleneck. In this case, the use of strains able to produce xylitol simultaneously to furfural neutralization is an interesting alternative. A wild-type strain of Geotrichum sp. was detected with this ability, and its performance in xylitol production and furfural consumption was evaluated. Furthermore, were analyzed its degradation products.ResultsGeotrichum sp. produced xylitol from d-xylose fermentation with a yield of 0.44 g·g-1. Furfural was fully consumed in fermentation assay and when provided in the medium until concentration of 6 g·L-1. The furfural degradation product is not an identified molecule, presenting a molecular weight of 161 g·mol-1, an uncommon feature for the microbial metabolism of this product.ConclusionThis strain presents most remarkable potential in performing furfural consumption simultaneous to xylitol production. Subsequent efforts must be employed to establish bioprocess to simultaneous detoxification and xylitol production by Geotrichum sp. 相似文献
7.
BackgroundA simple and efficient strategy for agarase immobilization was developed with carboxyl-functionalized magnetic nanoparticles (CMNPs) as support. The CMNPs and immobilized agarase (agarase-CMNPs) were characterized by transmission electron microscopy, dynamic light scattering, vibrating sample magnetometry, scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and zeta-potential analysis. The hydrolyzed products were separated and detected by ESI-TOF-MS.ResultsThe agarase-CMNPs exhibited a regular spherical shape with a mean diameter of 12 nm, whereas their average size in the aqueous solution was 43.7 nm as measured by dynamic light scattering. These results indicated that agarase-CMNPs had water swelling properties. Saturation magnetizations were 44 and 29 emu/g for the carriers and agarase-CMNPs, respectively. Thus, the particles had superparamagnetic characteristics, and agarase was successfully immobilized onto the supports. Agaro-oligosaccharides were prepared with agar as substrate using agarase-CMNPs as biocatalyst. The catalytic activity of agarase-CMNPs was unchanged after six reuses. The ESI-TOF mass spectrogram showed that the major products hydrolyzed by agarase-CMNPs after six recycle uses were neoagarotetraose, neoagarohexaose, and neoagarooctaose. Meanwhile, the end-products after 90 min of enzymatic treatment by agarase-CMNPs were neoagarobiose and neoagarotetraose.ConclusionsThe enhanced agarase properties upon immobilization suggested that CMNPs can be effective carriers for agarase immobilization. Agarase-CMNPs can be remarkably used in developing systems for repeated batch production of agar-derived oligosaccharides. 相似文献
8.
BackgroundEndophytic bacteria are ubiquitous in all plant species contributing in host plant's nutrient uptake and helping the host to improve its growth. Moringa peregrina which is a medicinal plant, growing in arid region of Arabia, was assessed for the presence of endophytic bacterial strains.ResultsPCR amplification and sequencing of 16S rRNA of bacterial endophytes revealed the 5 endophytic bacteria, in which 2 strains were from Sphingomonas sp.; 2 strains from Bacillus sp. and 1 from Methylobacterium genus. Among the endophytic bacterial strains, a strain of Bacillus subtilis LK14 has shown significant prospects in phosphate solubilization (clearing zone of 56.71 mm after 5 d), ACC deaminase (448.3 ± 2.91 nM α-ketobutyrate mg- 1 h- 1) and acid phosphatase activity (8.4 ± 1.2 nM mg- 1 min- 1). The endophytic bacteria were also assessed for their potential to produce indole-3-acetic acid (IAA). Among isolated strains, the initial spectrophotometry analysis showed significantly higher IAA production by Bacillus subtilis LK14. The diurnal production of IAA was quantified using multiple reactions monitoring method in UPLC/MS–MS. The analysis showed that LK14 produced the highest (8.7 μM) IAA on 14th d of growth. Looking at LK14 potentials, it was applied to Solanum lycopersicum, where it significantly increased the shoot and root biomass and chlorophyll (a and b) contents as compared to control plants.ConclusionThe study concludes that using endophytic bacterial strains can be bio-prospective for plant growth promotion, which might be an ideal strategy for improving growth of crops in marginal lands. 相似文献
9.
BackgroundSuper-paramagnetic iron oxide nanoparticles (SPION) contain a chemotherapeutic drug and are regarded as a promising technique for improving targeted delivery into cancer cells.ResultsIn this study, the fabrication of 5-fluorouracil (5-FU) was investigated with loaded Dextran (DEX-SPION) using the co-precipitation technique and conjugated by folate (FA). These nanoparticles (NPs) were employed as carriers and anticancer compounds against liver cancer cells in vitro. Structural, magnetic, morphological characterization, size, and drug loading activities of the obtained FA-DEX-5-FU-SPION NPs were checked using FTIR, VSM, FESEM, TEM, DLS, and zeta potential techniques. The cellular toxicity effect of FA-DEX-5-FU-SPION NPs was evaluated using the MTT test on liver cancer (SNU-423) and healthy cells (LO2). Furthermore, the apoptosis measurement and the expression levels of NF-1, Her-2/neu, c-Raf-1, and Wnt-1 genes were evaluated post-treatment using flow cytometry and RT-PCR, respectively. The obtained NPs were spherical with a suitable dispersity without noticeable aggregation. The size of the NPs, polydispersity, and zeta were 74 ± 13 nm, 0.080 and −45 mV, respectively. The results of the encapsulation efficiency of the nano-compound showed highly colloidal stability and proper drug maintenance. The results indicated that FA-DEX-5-FU-SPION demonstrated a sustained release profile of 5-FU in both phosphate and citrate buffer solutions separately, with higher cytotoxicity against SNU-423 cells than against other cells types. These findings suggest that FA-DEX-SPION NPs exert synergistic effects for targeting intracellular delivery of 5-FU, apoptosis induction, and gene expression stimulation.ConclusionsThe findings proved that FA-DEX-5-FU-SPION presented remarkable antitumor properties; no adverse subsequences were revealed against normal cells.How to cite: Mahdia SA, Kadhimb AA, Albukhaty S, et al. Gene expression and apoptosis response in hepatocellular carcinoma cells induced by biocompatible polymer/magnetic nanoparticles containing 5-fluorouracil. Electron J Biotechnol 2021;52. https://doi.org/10.1016/j.ejbt.2021.04.001 相似文献
10.
BackgroundBiohydrogen effluent contains a high concentration of volatile fatty acid (VFA) mainly as butyric, acetic, lactic and propionic acids. The presence of various VFAs (mixture VFAs) and their cooperative effects on two-stage biohythane production need to be further studied. The effect of VFA concentrations in biohydrogen effluent of palm oil mill effluent (POME) on methane yield in methane stage of biohythane production was investigated.ResultsThe methane yield obtained in low VFA loading (0.9 and 1.8 g/L) was 15–20% times greater than that of high VFA loading (3.6 and 4.7 g/L). Butyric acid at high concentrations (8 g/L) has the individual significantly negative effect the methane production process (P < 0.05). Lactic, acetic and butyric acid mixed with propionic acid at a concentration higher than 0.5 g/L has an interaction significantly negative effect on the methanogenesis process (P < 0.05). Inhibition condition had a negative effect on both bacteria and archaea with inhibited on Geobacillus sp., Thermoanaerobacterium thermosaccharolyticum, Methanoculleus thermophilus and Methanothermobacter delfuvii resulting in low methane yield.ConclusionPreventing the high concentration of butyric acid, and propionic acid in the hydrogenic effluent could enhance methane production in two-stage anaerobic digestion for biohythane production. 相似文献
11.
BackgroundCecropin P1, acting as an antimicrobial, has a broad-spectrum antibacterial activity with some antiviral and antifungal properties. It is a promising natural alternative to antibiotics which is originally isolated from the pig intestinal parasitic nematode Ascaris suum. Many studies have shown that Cecropin P1 is helpful for the prevention or treatment of clinical diseases. Therefore, it is very necessary to establish a safe, nontoxic, and efficient expression method of Cecropin P1.ResultsThe results indicated that the recombinant protein was about 5.5 kDa showed by Tricine–SDS–PAGE and Western blot. And Cecropin P1 was efficiently secreted and expressed after 12 h of induction, with an increasing yield over the course of the induction. Its maximum concentration was 7.83 mg/L after concentration and purification. In addition, in vitro experiments demonstrated that Cecropin P1 not only exerted a strong inhibitory effect on Escherichia coli, Salmonella sp., Shigella sp., and Pasteurella sp., but also displayed an antiviral activity against PRRSV NADC30-Like strain.ConclusionsCollectively, the strategy of expressing Cecropin P1 in Saccharomyces cerevisiae is harmless, efficient, and safe for cells. In addition, the expressed Cecropin P1 has antiviral and antibacterial properties concurrently.How to cite: Jiang R, Zhang P, Wu X, et al., Expression of antimicrobial peptide Cecropin P1 in Saccharomyces cerevisiae and its antibacterial and antiviral activity in vitro. Electron J Biotechnol 2021;50. https://doi.org/10.1016/j.ejbt.2020.12.006 相似文献
12.
BackgroundAn effective single culture with high glycerol consumption and hydrogen and ethanol coproduction yield is still in demand. A locally isolated glycerol-consuming Escherichia coli SS1 was found to produce lower hydrogen levels under optimized ethanol production conditions. Molecular approach was proposed to improve the hydrogen yield of E. coli SS1 while maintaining the ethanol yield, particularly in acidic conditions. Therefore, the effect of an additional copy of the native hydrogenase gene hycE and recombinant clostridial hydrogenase gene hydA on hydrogen production by E. coli SS1 at low pH was investigated.ResultsRecombinant E. coli with an additional copy of hycE or clostridial hydA was used for fermentation using 10 g/L (108.7 mmol/L) of glycerol with an initial pH of 5.8. The recombinant E. coli with hycE and recombinant E. coli with hydA showed 41% and 20% higher hydrogen yield than wild-type SS1 (0.46 ± 0.01 mol/mol glycerol), respectively. The ethanol yield of recombinant E. coli with hycE (0.50 ± 0.02 mol/mol glycerol) was approximately 30% lower than that of wild-type SS1, whereas the ethanol yield of recombinant E. coli with hydA (0.68 ± 0.09 mol/mol glycerol) was comparable to that of wild-type SS1.ConclusionsInsertion of either hycE or hydA can improve the hydrogen yield with an initial pH of 5.8. The recombinant E. coli with hydA could retain ethanol yield despite high hydrogen production, suggesting that clostridial hydA has an advantage over the hycE gene in hydrogen and ethanol coproduction under acidic conditions. This study could serve as a useful guidance for the future development of an effective strain coproducing hydrogen and ethanol. 相似文献
13.
BackgroundBiosurfactants are surface active molecules produced by microorganisms which have the ability to disrupt the plasma membrane. Biosurfactant properties are important in the food, pharmaceutical and oil industries. Lactic acid bacteria can produce cell-bound and excreted biosurfactants.ResultsThe biosurfactant-producing ability of three Lactobacillus strains was analyzed, and the effects of carbon and nitrogen sources and aeration conditions were studied. The three species of lactobacillus evaluated were able to produce biosurfactants in anaerobic conditions, which was measured as the capacity of one extract to reduce the surface tension compared to a control. The decreasing order of biosurfactant production was L. plantarum>Lactobacillus sp.>L. acidophilus. Lactose was a better carbon source than glucose, achieving a 23.8% reduction in surface tension versus 12.9% for glucose. Two complex nitrogen sources are required for growth and biosurfactant production. The maximum production was reached at 48 h under stationary conditions. However, the highest level of production occurred in the exponential phase. Biosurfactant exhibits a critical micelle concentration of 0.359 ± 0.001 g/L and a low toxicity against E. coli. Fourier transform infrared spectroscopy indicated a glycoprotein structure. Additionally, the kinetics of fermentation were modeled using a logistic model for the biomass and the product, achieving a good fit (R2 > 0.9).ConclusionsL. plantarum derived biosurfactant production was enhanced using adequate carbon and nitrogen sources, the biosurfactant is complex in structure and because of its low toxicity could be applied to enhance cell permeability in E. coli.How to cite: Montoya Vallejo C, Florez Restrepo MA, Guzmán Duque FL, et al. Production, characterization and kinetic model of biosurfactant produced by lactic acid bacteria. Electron J Biotechnol 2021;53. https://doi.org/10.1016/j.ejbt.2021.06.001 相似文献
14.
BackgroundOrnithine decarboxylase antizyme 1 (OAZ1) is an important regulator of polyamine synthesis and uptake. Our previous studies indicated that high OAZ1 expression in the ovaries of laying geese is responsible for poor egg production. In the present study, the molecular characterization of goose OAZ1 gene was analyzed, as well as the expression profile in various follicular tissues.ResultsAn 873-bp cDNA sequence of the OAZ1 gene (Accession No. KC845302) with a + 1 frameshift site (+ 175T) was obtained. The sequence consisted of a 652-bp two overlapping open reading frames (a putative protein with 216 amino acids). The OAZ domain, OAZ signature and OAZ super family domain were prominent conserved regions among species. As the follicle size increased, OAZ1 abundance showed an increasing trend during follicular development, while it decreased during follicular regression. The level of OAZ1 mRNA expression was the lowest in the fifth largest preovulatory follicle, and was 0.65-fold compared to the small white follicle (P < 0.05). OAZ1 mRNA expression in the largest preovulatory and postovulatory follicle was 2.11- and 2.49-fold compared to the small white follicle, respectively (P < 0.05).ConclusionsThe goose OAZ1 structure confirms that OAZ1 plays an important role in ornithine decarboxylase-mediated regulation of polyamine homeostasis. Our findings provide an evidence for a potential function of OAZ1 in follicular development, ovulation and regression. 相似文献
15.
16.
BackgroundSurfactants are one of the most important raw materials used in various industrial fields as emulsifiers, corrosion inhibitors, foaming agents, detergent products, and so on. However, commercial surfactant production is costly, and its demand is steadily increasing. This study aimed to evaluate the performance of typical strains of Bacillus sp. to produce biosurfactants through fermentation. It also included the investigation of the effect of initial glucose concentration and the carbon to nitrogen ratio.ResultsThe biosurfactant yield was in the range of 1–2.46 g/L at initial glucose concentrations of 10–70 g/L. The optimum fermentation condition was achieved at a carbon to nitrogen ratio of 12.4, with a decrease in surface tension of up to 27 mN/m.ConclusionsFor further development and industrial applications, the modified Gompertz equation is proposed to predict the cell mass and biosurfactant production as a goodness of fit was obtained with this model. The modified Gompertz equation was also extended to enable the excellent prediction of the surface tension. 相似文献
17.
《Electronic Journal of Biotechnology》2014,17(3):114-121
BackgroundIn the industrial biotechnology, ligninolytic enzymes are produced by single fungal strains. Experimental evidence suggests that co-culture of ligninolytic fungi and filamentous microfungi results in an increase laccase activity. In this topic, only the ascomycete Trichoderma spp. has been studied broadly. However, fungal ligninolytic-filamentous microfungi biodiversity interaction in nature is abundant and poorly studied. The enhancement of laccase and manganese peroxidase (MnP) activities of Trametes maxima as a function of time inoculation of Paecilomyces carneus and under several culture conditions using Plackett–Burman experimental design (PBED) were investigated.ResultsThe highest increases of laccase (12,382.5 U/mg protein) and MnP (564.1 U/mg protein) activities were seen in co-cultures I3 and I5, respectively, both at 10 d after inoculation. This level of activity was significantly different from the enzyme activity in non-inoculated T. maxima (4881.0 U/mg protein and 291.8 U/mg protein for laccase and MnP, respectively). PBED results showed that laccase was increased (P < 0.05) by high levels of glucose, (NH4)2SO4 and MnSO4 and low levels of KH2PO4, FeSO4 and inoculum (P < 0.05). In addition, MnP activity was increased (P < 0.05) by high yeast extract, MgSO4, CaCl2 and MnSO4 concentrations.ConclusionsInteraction between indigenous fungi: T. maxima–P. carneus improves laccase and MnP activities. The inoculation time of P. carneus on T. maxima plays an important role in the laccase and MnP enhancement. The nutritional requirements for enzyme improvement in a co-culture system are different from those required for a monoculture system. 相似文献
18.
BackgroundThe hydrolysis of keratin wastes by microorganisms is considered a biotechnological alternative for recycling and valorization through keratinolytic microorganisms. Despite their resistant structure, keratin wastes can be efficiently degraded by various microorganisms through the secretion of keratinases, which are promising enzymes for several applications, including detergents, fertilizers, and leather and textile industry. In an attempt to isolate keratinolytic microorganisms that can reach commercial exploitation as keratinase producers, the current work assesses the dynamics of keratin biodegradation by several keratinolytic fungal strains isolated from soil. The activity of fungal strains to degrade keratin substrates was evaluated by SEM, FTRIR-ATR spectra and TGA analysis.ResultsSEM observations offered relevant information on interactions between microorganism and structural elements of hair strands. FTIR spectra of the bands at 1035–1075 cm-1 assigned to sulfoxide bond appeared because of S–S bond breaking, which demonstrated the initiation of keratin biodegradation. According to TGA, in the second zone of thermal denaturation, where keratin degradation occurs, the highest weight loss of 71.10% was obtained for sample incubated with Fusarium sp. 1A.ConclusionsAmong the tested strains, Fusarium sp. 1A was the most active organism in the degradation process with the strongest denaturation of polypeptide chains. Because keratinolytic microorganisms and their enzymes keratinases represent a subject of scientific and economic interest because of their capability to hydrolyze keratin, Fusarium sp. 1A was selected for further studies. 相似文献
19.
《Electronic Journal of Biotechnology》2014,17(6):311-316
BackgroundLysozyme plays a crucial role in innate immunity with its well-recognized bacteriolytic activity. In this study, the influence of expression parameters (inoculation volume, culture volume, growth time, induction temperature and time, initial pH and methanol concentration) on human lysozyme (HLZ) production in recombinant P. pastoris SMD1168 was investigated through Plackett–Burman (PB) design and response surface methodology (RSM).ResultsIt was revealed that induction temperature, induction time and culture volume had significant influence (P < 0.01) on HLZ expression level, which were elected for further optimization with three-dimensional response surface designs for enhanced HLZ production. The highest lysozyme activity reached 3301 U/mL under optimized conditions (at 23.5°C for 90 h with culture volume of 48 mL) in shake flask, which increased 2.2 fold compared with that achieved with the standard protocol (Invitrogen). When high-cell-density fermentation of the recombinant Pichia pastoris was performed in a 15 L fermenter under optimized conditions, the extracellular lysozyme activity reached 47,680 U/mL. SDS-PAGE analysis of the product demonstrated that HLZ was produced as a single major protein with a molecular weight of approximately 14.7 kDa, consistent with its expected size.ConclusionsThe results indicated that the optimized culture conditions using PB design and RSM significantly enhanced the expression level of HLZ, and the Pichia expression system for HLZ production was successful and industrially promising. 相似文献
20.
《Electronic Journal of Biotechnology》2014,17(2):55-64
BackgroundCyclodextrin glucanotransferase (CGTase) from Amphibacillus sp. NPST-10 was covalently immobilized onto amino-functionalized magnetic double mesoporous core–shell silica nanospheres (mag@d-SiO2@m-SiO2-NH2), and the properties of the immobilized enzyme were investigated. The synthesis process of the nanospheres included preparing core magnetic magnetite (Fe3O4) nanoparticles, coating the Fe3O4 with a dense silica layer, followed by further coating with functionalized or non-functionalized mesoporous silica shell. The structure of the synthesized nanospheres was characterized using TEM, XRD, and FT-IR analyses. CGTase was immobilized onto the functionalized and non-functionalized nanospheres by covalent attachment and physical adsorption.ResultsThe results indicated that the enzyme immobilization by covalent attachment onto the activated mag@d-SiO2@m-SiO2-NH2, prepared using anionic surfactant, showed highest immobilization yield (98.1%), loading efficiency (96.2%), and loading capacity 58 µg protein [CGTase]/mg [nanoparticles]) which were among the highest yields reported so far for CGTase. Compared with the free enzyme, the immobilized CGTase demonstrated a shift in the optimal temperature from 50°C to 50–55°C, and showed a significant enhancement in the enzyme thermal stability. The optimum pH values for the activity of the free and immobilized CGTase were pH 8 and pH 8.5, respectively, and there was a significant improvement in pH stability of the immobilized enzyme. Moreover, the immobilized CGTase exhibited good operational stability, retaining 56% of the initial activity after reutilizations of ten successive cycles.ConclusionThe enhancement of CGTase properties upon immobilization suggested that the applied nano-structured carriers and immobilization protocol are promising approach for industrial bioprocess for production of cyclodextrins using immobilized CGTase. 相似文献