首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Titanium dioxide (TiO2) can be used to realize transparent self-cleaning coatings on stone surfaces as an active and preventive protection system, limiting cleaning and maintenance actions, reducing their costs in Architectural Heritage. This self-cleaning ability is due to photo-induced hydrophilicity on treated surfaces. The aim of this investigation is to analyze this effect, since it could bring to a greater water absorption, a potential source of damage for stone surfaces. Titania sol, obtained by sol-gel and hydrothermal processes, was deposited on travertine by spray coating, in two different ways. Water absorption by capillarity, static contact angle and a specific surface water absorption analysis were assessed before and after the TiO2 treatments. The effects of deposited amount of titania on the characteristics of treated surfaces were evaluated. It was shown that there were no evident changes in the substrate reactivity without ultraviolet (UV) light exposure, while it seems that hydrophilicity due to UV light does not lead to higher water absorption, thus encouraging the use of TiO2 coatings in the field of Architectural Heritage. However, before widely applying this conservative treatment, some further researches are recommended in order to better assess its durability and sustainability.  相似文献   

2.
Calcium hydroxide is typically used in Cultural Heritage conservation for superficial protective treatments thanks to its conversion into calcium carbonate. Calcium carbonate is, in fact, compatible with many carbonate-based architectonic surfaces, because its characteristics are similar to those of the restored materials. In order to improve calcium hydroxide treatments, Ca(OH)2 particles with sub-micrometric dimensions (nanolimes), are synthesised by a chemical precipitation process: a sodium hydroxide solution, used as precipitator, is added, drop by drop, to a calcium chloride one. In this paper, a nanometric calcium hydroxide, to be used in stones treatment, is produced adding in the initial solutions a surfactant agent (Triton X-100); the solutions are then mixed together simultaneously, drastically reducing the time needful for preparation. Different contents of surfactant are employed, and the influence on particles dimension and carbonatation process is analysed too. The obtained Ca(OH)2 nanoparticles are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and electron diffraction (ED). The Ca(OH)2 nanoparticles are regularly shaped, hexagonally plated and with side dimensions less than 200 nm: in particular, increasing the surfactant content, the particle dimension reaches values until 20 nm. Comparing nanolime suspensions obtained without and with the addition of the surfactant agent, the last ones have comparable, if not better, performances in terms of average particle size and morphology, crystallinity and reactivity. Afterwards, the alcoholic nanolime suspension obtained by using Triton X-100 is applied on some natural stones; in fact, the aim of this section is to compare the obtained results with those achieved using a nanolime synthesised without the surfactant agent. To evaluate the treatment effectiveness in a preliminary way, standard tests are performed and compared with the same tests previously obtained by the nanolime synthesised without the surfactant agent: “Scotch Tape Test” and capillarity test.  相似文献   

3.
Acetic and formic acid vapors emitted from woodwork in historical organs are very important corrosive agents for lead pipes. These acids are slowly released from the wood both during playing and when the pipes are silent. To inhibit this emission process, the wood surface can be modified, by creating a protective layer with alkaline features. However, a coating of wood is not recommended since this could modify the appearance and create a layer not perfectly compatible with the substrate. For this reason, we propose to use some innovative nanotechnology that has been successfully applied for the deacidification of wood samples coming from the Vasa shipwreck. Application of calcium (or magnesium) hydroxide nanoparticles, with sizes ranging from 30–150 nm, allowed a homogeneous distribution of particles through the surface layer of wood simply by soaking (or spraying) it in a alcoholic (or mixed with less polar solvents) dispersion of nanoparticles. Nanoparticles do not modify the wood appearance and distribute randomly within the first layers of wood. The small size of particles accounts for the high reactivity with CO2 from the air, to give the alkaline reserve of carbonates that provide high efficacy in the neutralization of gaseous acids. The emission of volatile organic compounds (VOC) from the treated wood was determined by using an emission test cell, Field and Laboratory Emission Cell (FLEC). The results show that the emissions of acetic acid vapor from nanoparticles treated wood was very low (< 70 μg/m2 h) during the first 13 month. In contrast, untreated wood emitted high concentrations of acetic acid vapor (200–400 μg/m2 h).  相似文献   

4.
The microgravity method is one of the geophysical tools used in engineering and environmental and archaeological researches, where the detection of subsurface cavities or buried structures is essential. In this study, this technique has been revealed to be an efficient and respectful tool for use in Cultural Heritage restoration studies, such as those carried out in the restoration of historical sites in which the elements to be examined are beneath a shallow coating of material. Therefore, the aim of this microgravimetric survey is to define the exact position and dimensions of a subsurface structure (rainwater cistern) through microgravity response of the medium.For this purpose, the subsurface structure of San Gerónimo Cloister of the Vall de Crist Carthursian Monastery (14th century) has been researched. This monastery was known to be the largest Carthusian Monastery in the region of Valencia (Spain) and one of the most remarkable of the ancient Corona de Aragón. A rectangular grid of microgravity measurement station points was designed to cover the entire surface of the cloister. In addition, a microgravimetric profile was acquired along a hillside close to the Carthusian buildings in order to obtain the density value of the medium.The study was performed using a LaCoste&Romberg D203 gravimeter to detect and to map the shallow subsurface rainwater cistern that probably exits beneath it. This gravimeter has a sensitivity of approximately 1 μgal (μgal = 1.10−8 ms−2) and an accuracy of 3–5 μgal for relative gravity measurements.Two contour maps were calculated (observed gravity and Bouguer gravity values) in order to improve the interpretation results. On these maps we can observe the shape of the body that is causing the perturbation in gravity values. And what is more, it led us to deduce that the central area of the cavity is deeper than the border area. In addition, we can asses that the cavity is 8 m wide and 12 m long, and is symmetrical along its longitudinal axis, but not along its transversal axis.Also, a microgravimetric inversion was performed and the subsurface is split into 7 prisms and the depth and height of each is to be estimated separately. As a result of this inversion we can estimate that the ceiling of the cistern is located about 1 m under the cloister pavement and the cistern floor at a depth of 4 m. The cistern is slightly inclined towards one of its edges by about 20 cm.Finally, the 2D modelling derived by microgravimetric data has allowed us to determinate the shape, dimensions and location of the cistern accurately. In addition we have calculated the cistern capacity (288 m3, that is, 2880 Hl). This capacity was quite enough for the water necessities of 13 monks who lived there permanently, even for making it through the drought periods frequent in this kind of Mediterranean areas.  相似文献   

5.
Black crusts formed on limestone built into the King's Gate represent the most important process in stone deterioration that is occurring in this part of the monumental complex of the Belgrade Fortress (Serbia). Of special importance is the association of salts (namely gypsum and syngenite). Syngenite is a common secondary deposit on granite monuments and on medieval stained glass (i.e., on K-containing materials). However, its appearance over calcareous substrates is not apparent, particularly in cases where cement mortar was not used for bounding. The origins of the potassium and sulphate ions required for syngenite formation are related to meteoritic water, which penetrates the soil above the arch of King's Gate. Water dissolves some soil components and becomes enriched with various ions before coming into contact with the limestone blocks. Enriched water contains two times more K+ and SO42? ions than pristine meteoritic water does. The source of the required ions is potassium-sulphate that is present in agricultural fertilisers that are used above the monument. The proposed mechanism for syngenite formation was additionally supported with laboratory experiment. The results of X-ray diffractometry and SEM-EDS analyses of limestone treated with potassium-sulphate solution and sulphuric acid suggest the possibility that the syngenite was formed over calcite:CaCO3 + K2SO4 + H2SO4 → K2Ca(SO4)2 H2O + CO2↑However, the complex mechanisms of gypsum and syngenite formation under natural conditions (variable concentration of potassium and sulphate ions, intermediates phases, temperature changes, humidity, the amount of disposable water etc.) do not exclude the possibility of syngenite formation over gypsum.  相似文献   

6.
Two multivariate statistical tools – principal components analysis and cluster analysis – were applied to aid in the interpretation of the historical development of St. John the Baptist's church (?i?e, Slovenia). With these methods it was possible to distinguish between the types of mortar used in the Romanesque and Gothic time periods. The investigated structure is a ruin with poorly preserved fragments of historical mortars, so tracing the individual stages of its construction proved to be a demanding task. Its chemical composition was determined by inductively coupled plasma mass spectrometry (ICP-MS) and the results of the content of various oxides were statistically evaluated to interpret the age of the southern wall of the church.  相似文献   

7.
Accurate three-dimensional representations of cultural heritage sites are highly valuable for scientific study, conservation, and educational purposes. In addition to their use for archival purposes, 3D models enable efficient and precise measurement of relevant natural and architectural features. Many cultural heritage sites are large and complex, consisting of multiple structures spatially distributed over tens of thousands of square metres. The process of effectively digitising such geometrically complex locations requires measurements to be acquired from a variety of viewpoints. While several technologies exist for capturing the 3D structure of objects and environments, none are ideally suited to complex, large-scale sites, mainly due to their limited coverage or acquisition efficiency. We explore the use of a recently developed handheld mobile mapping system called Zebedee in cultural heritage applications. The Zebedee system is capable of efficiently mapping an environment in three dimensions by continually acquiring data as an operator holding the device traverses through the site. The system was deployed at the former Peel Island Lazaret, a culturally significant site in Queensland, Australia, consisting of dozens of buildings of various sizes spread across an area of approximately 400 × 250 m. With the Zebedee system, the site was scanned in half a day, and a detailed 3D point cloud model (with over 520 million points) was generated from the 3.6 hours of acquired data in 2.6 hours. We present results demonstrating that Zebedee was able to accurately capture both site context and building detail comparable in accuracy to manual measurement techniques, and at a greatly increased level of efficiency and scope. The scan allowed us to record derelict buildings that previously could not be measured because of the scale and complexity of the site. The resulting 3D model captures both interior and exterior features of buildings, including structure, materials, and the contents of rooms.  相似文献   

8.
‘Marmor Misium’ was one of the most used granites of antiquity, especially for the manufacture of columns and slabs. It was quarried in the area of Kozak (Turkey) and used locally from the Late Hellenistic period and later, probably at the end of the 1st century AD, exported to Rome and other important Roman towns of the Mediterranean sea. It seems that ‘Marmor Misium’ continued to be quarried until the Early Byzantine time; it is now still quarried for local use (road paving, etc.). In spite of its historical importance and geological interest, this granite has never been the subject of detailed petrological studies. That is why in this work it has been sampled from various outcrops of the plutonite and in abandoned ancient quarries and characterised petrographically and geochemically. From the petrographic point of view, the plutonites of Kozak are medium-grained biotite-hornblende granite and granodiorite composed of 34.2–53 % (modal) zoned plagioclase, 23.7–35.4 % K-feldspar, 21.4–29 % anhedral quartz, 4.9–10 % brown biotite and 7.7 % green hornblende. These rocks are I-type metaluminous granitoids of high-k calc-alkaline orogenic series forming a crystallised body at a depth of about 10 km. The positive distinction between ‘Marmor Misium’ and two other granites used in antiquity and macroscopically very similar to it, those from the Elba and Giglio islands (Italy), is easily made by considering the absence of hornblende, the peraluminous character and the lower Sr and Ba and higher Rb contents for the latter.  相似文献   

9.
The concentrations of CO2, CO, formaldehyde (H2CO) and water vapour were simultaneously monitored in various sections of a mountain church situated in the village of Rocca Pietore in the Italian Alps. The performance of a conventional, hot-air heating system and a novel design for heating the church, consisting of low-temperature heating elements, such as electrically heated pews and carpets, were compared for the supply, transport and removal of gases, the deposition and/or transformation of which may affect the preservation of displayed works of art. Experiments with sulphur hexafluoride (SF6) tracer-gas showed a considerable influx of external air through the hot air carrier ducts of the old heating system, and also the leakage of the internal air mostly via the apertures of the doors. The ventilation rates for the total volume of the church with the hot-air heating system (on for 1.5 h), the new heating system (on for 2 h), and without heating were calculated to be 0.25, 0.18, and 0.13 h−1, respectively. Without heating, a nearly homogeneous distribution of gases has been observed along both the horizontal and the vertical cross-sections of the church. Immediately after switching on the hot-air heating system, the levels of CO2 and water vapour showed a sharp increase. After turning this system off, the levels of gases showed a slow fall and they developed a highly non-homogeneous spatial distribution indoors for many hours. In the upper region of the church, being airtight, higher concentrations of the pollutants could be detected. The low levels of CO and H2CO, mostly originating from incense burning during services, were correlated to that of CO2. The hot-air heating system has been proved to present a potential deterioration risk to artworks, as it increases the supply, transport and deposition probability of air pollutants. On the other hand, the novel, symmetrical heating system eliminates these undesirable effects, thus its application is advantageous to all churches involved in the preservation of works of art.  相似文献   

10.
The study refers to the visual representation of the coastal front of the historical center of Thessaloniki in northern Greece and its changes that have occurred through the years. Most of the old town was destroyed by fire on August 18, 1917. A few years later, the French architect and archeologist Ernest Hébrard proposed the reconstruction of the city centre, but his plans were never fully implemented. Since then, a series of interventions changed the form of the old town and consequently the coastal cityscape. The research was initially based on the photogrammetric processing of archive aerial images (1938) of Thessaloniki's city centre. Besides the vertical images, high oblique aerial images dated back to 1932, proved to be a significant source of information. A rich archive of old photographic material, sketches, drawings and gravures of the coastal forehead of the city was also used. Ortho-images of the coastal front, derived from laser scanning (2010), and a 3D model of the historical city center, derived from the stereo photogrammetric process of aerial images (1990), contributed decisively at the multi temporal study of the city front. The main outcomes of the present documentation study are the 3D representation (at scale of 1:200, accuracy 5 cm) of temporal changes of a part of the coastal front of the historical center of Thessaloniki and the 2D representation (at scale 1:100, accuracy 1–2 cm) of these changes with respect to variations on skyline, lacunas, interventions in old buildings, etc.  相似文献   

11.
We report the first results of a research study aimed at developing a new strategy for the conservation of wooden structural elements present in historical buildings, based on moisture regulating systems. As has been happening for artefact preservation in museums, the idea is to develop systems based on the ability of some highly hygroscopic materials to moderate variations in relative humidity. These materials could adsorb and release moisture to reduce the extreme values of humidity in the micro-climate, for example between wooden beams and masonry. In order to experimentally verify this possibility using current, low cost and easy handling building materials, 5 bentonite samples were laboratory processed to improve their adsorbing properties by means of treatment with sodium carbonate at 3 concentrations: 2, 3 and 4% by weight. The effectiveness of ion exchange between sodium carbonate and bentonite was controlled by measuring the swelling volume of the bentonites. All the samples (n = 15) were tested for their hygroscopic properties. Adsorption isotherms were measured at 25 °C, using desiccators with silica gel, saturated salt solutions and bi-distilled water. A comparison between isotherms of one of the lower hygroscopic treated sample of bentonite and of a sample of wood and of a sample of brick and some numerical analyses with the Delphin code were made in order to evaluate the potential use of this bentonite as a moisture regulating system for the preservation of historical wooden elements. Results show that it seems to be possible to use bentonites as a moisture buffering material in order to reduce moisture content in wooden beams at least during their adsorption phase. It remains to investigate their desorption phase and their behaviour if they be in a saturation condition. Further studies are currently under way.  相似文献   

12.
The paper presents our results concerning a complex investigation by reflectance spectroscopy (RS) and Electron Paramagnetic Resonance (EPR) of the defects induced by gamma irradiation in 22 different historical pigments. Gamma irradiation is used to destroy microflora and insects which are involved in biodeterioration processes of art works such as paintings. At the same time, it can induce defects i.e. color centers which are likely to modify the original painting colors by altering the embedded pigments. Accordingly, RS was used to quantify, by means of CIELAB color space, the contribution of irradiation defects to the pigments color changes, while EPR spectroscopy, in view of paramagnetic properties of color centers, was used to confirm their presence after irradiation. Our investigations showed that, excepting marble dust whose color alteration was still observable after 3 months, color changes induced by irradiation in all other pigments disappeared after about 30–40 days. In addition, RS as well as EPR measurements suggest that color changes are related to irradiation color centers, this finding being confirmed by the coincidence, within experimental uncertainties, of the half-life time color changes as obtained by these methods.  相似文献   

13.
Hyperspectral imaging can be an important tool for the assessment and documentation of the state of preservation of an object. Over time, documents that have experienced heavy usage will inevitably show evidence of handling, which can include staining. In this paper, the use of hyperspectral imaging is described for enhancing the assessment of the visual properties of stains. The use of imaging software (ENVI) is also described for quantitatively assessing the extent of staining in two different documents. Single 10 nm bandpass images can be useful assessing darker stains with well defined boundaries. In one document (a treaty), the faint discolouration on one page made the extent of staining difficult to assess visually. A false colour density slice (450 nm) provided a topographical image which was useful for enhancing the contrast between stained and unstained paper. In this type of image, the degree of discolouration could be correlated to optical density and the amount of staining on a page could then be related to the number of pixels for a given absorbance range. In a second document (a prayer book), the staining was more extensive and some of the stains were dark in appearance. This document also contained a lot of text that was written using a dark irongall ink, which limited the use of a density slice at a single bandpass. In this document, pixel unmixing was successfully used to quantitatively determine the extent of staining. The measurement tool provided with the Nuance? Imaging System made it possible to quantitatively describe the size of the stain in terms of the number of pixels as well as its appearance in terms of average optical density.  相似文献   

14.
This work reports mainly the results of an X-ray Absorption Spectroscopy (XAS) study carried out on coloured glass tesserae from the palaeo-Christian mosaic which decorated the votive chapel of St. Prosdocimus (Padova) until its replacement with the current frescoes of Renaissance age, and which is one of the only two known mosaics in the Veneto region (Italy). The study aims at clarifying how the different local structure, oxidation state and quantity of copper influenced colour. Analysis of high-resolution Cu-K edge X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) spectra showed that copper is present as cuprite (Cu2O) in orange samples and as metallic copper in red and brown ones. These phases are responsible for both the colour and opacity of the samples. In addition, Cu1+ ions linked to the oxygen atoms of the glass framework were identified in ratios of about 60% and 30% of total copper in orange and red/brown samples, respectively. In blue and green samples, copper is dispersed in the glass matrix as a mixture of Cu1+ and Cu2+ ions, and no crystalline phases are visible. In this context, the Cu1+ and Cu2+ contents in glass were also quantified thanks to suitable standards, demonstrating that, when Cu2+ is the main chromophorous ion, colour intensity is directly correlated to its content in the glass. In particular, in green and blue samples, coloured by copper, Cu2+ content varies from 26% to 56% of total copper, and the higher contents of Cu2+ are shown by more intensely coloured samples. It should be stressed here that the green colour of the analysed tesserae is given by the physical interaction of blue colour, due to Cu2+ ions, and yellow colour, due to Pb antimonates used as opacifiers.  相似文献   

15.
The paper presents the use of laser radiation for cleaning of beeswax treated granite stone. In the early sixties, prestigious restorers decided to apply molten beeswax on the granite surface of valuable monuments with the aim of preventing the erosive action of atmospheric agents. An interesting example of this treatment is the Renaissance Frieze in the Cloister of the Cathedral of Santiago de Compostela in Galicia (Northwest Spain). With time, salt accumulation beneath the beeswax layer has caused an intense surface disintegration of granite. Conventional cleaning methods can destroy sculptured details of these emblematic monuments. For this reason, excimer laser cleaning has been chosen as a promising non contact, selective and environmentally friendly cleaning technique to be studied.The cleaning tests have been carried out using an excimer laser (ArF, 193 nm), with fluences between 0.5 and 2 J cm−2 pulse−1 and a spot area of 0.025 cm2. Samples representing beeswax films over Roan granite have been irradiated and their degree of cleaning has been studied as a function of the number of pulses and the laser fluence.Cleaning efficiency has been evaluated by FT-Raman Spectroscopy, allowing to establish the beeswax ablation threshold and the ablation rate.Excimer laser cleaning allows a progressive and controlled removal of a few tenths of micrometers of beeswax per pulse without damaging the underlying granite stone.  相似文献   

16.
Salt crystallization is a major cause of damage in porous materials such as stone, brick and ceramics. The paper reports results of an analytical study on tiles of glazed ceramics that are seriously damaged by acetate salt crystallization. Measurements of the ionic composition of the salt mixture in the tiles and in the efflorescences were carried out. Based on the available information on the phase equilibria in the system comprising of the main constituents chloride, nitrate, acetate, calcium and sodium, the crystallization pathways of the various solid phases are traced. It is shown that a combination of qualitative XRD analysis of the phases present in the efflorescences together with a quantitative determination of the ionic composition is sufficient for the quantitative analysis of major crystalline species in the efflorescences, i.e. Ca3(CH3COO)3Cl(NO3)2 · 7H2O, thecotrichite, and NaCl, halite. The concentrations of these salts are obtained from a solution of the mass balance by least squares analysis. Their formation from the salt mixtures present in the tiles that are subject to acetic acid vapor attack is consistent with the solubility diagram of the above mentioned quinary system. Finally, the possibilities of preventive conservation of salt contaminated ceramics in typical museum environments are discussed.  相似文献   

17.
This work shows the capability of principal component analysis (PCA) to detect molecular, chemical and mineralogical changes in historic painting materials subjected to a thermal ageing test (< 250 °C). To simulate the heat-induced alterations an ageing accelerated process was performed on two sets of samples containing two mineral phases (hydroxyapatite and quartz) and two organic compounds (collagen and albumin). The chosen minerals behaved as internal standards during the tests since they are stable and chemically inert at the tested temperatures. Raman microscopy (RM) was applied to characterise one set of samples made of bone, containing ca. 70% hydroxyapatite and 30% collagen. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy was used to study the other set of samples made of four different quartz/albumin mixtures with quartz contents of 30%, 50%, 70% and 90% (w/w). The aim was to identify the ideal proportion of internal standard to be validated by ATR-FTIR and PCA, determined to be 70%. PCA analyses detected changes in the molecular structures of the organic components while the internal mineral standard remained stable. Moreover, the internal standard IR/Raman bands were constant during the tests and confirmed that the results of PCA analyses were independent of instrumental and technical factors, as well as sample collecting and handling. This demonstrates the potential benefits of our approach to study historical painting materials, which have suffered any type of heat-induced alteration.  相似文献   

18.
Short crystallisation and deliquescence cycles of mirabilite, epsomite and gypsum are identified by using an automated monitoring system on-site. It consists of digital cameras and RH/T sensors which are computer-controlled and connected to the Internet. Digital images are processed to form a time-lapse movie, so that surface alterations are easily recognised. High resolution imaging (6 mega pixels) in combination with various lenses (12–24 mm zoom, 28–105 mm zoom, 20 mm inversed) results in a wide range of precise observation from 7 to 500 mm width of image. That is essential for discriminating phase transitions of single crystals at the same time as monitoring the evolution of the efflorescence as a whole. Crystallisation-deliquescence cycles are induced by small temperature and humidity variations. Mirabilite and epsomite undergo phase changes from crystallisation to deliquescence and vice versa at about 83% RH (15–20 °C). These equilibrium relative humidities are considerably reduced compared to the pure salt systems as a consequence of mixed salt solutions. Observations confirm predictions by ECOS simulation based on chemical analyses of water extracts from the site. Dehydration of mirabilite is observed when the relative humidity drops below 65% RH. Mirabilite exhibits the most pronounced and rapid phase changes in response to indoor climate variations. As an example, whisker crystals of 1–3 mm length grow within one up to some days. Epsomite responds fainter and slower. Crystallisation of gypsum is distinguished by the growth of new crystals on the stone surface. They have a size of about 10 μ – which is close to the image resolution – when they appear on the image. Crystallisation is associated with an increased granular disaggregation of the stone surface. Rhythmical crystallisation of gypsum appears to correlate with small relative humidity variations of ±2–5% within a band from 65 to 75% RH in the room. However, this needs to be clarified in detail.  相似文献   

19.
An investigation has been undertaken into the effect of wavelength in the laser cleaning of parchment. Tests have been carried out using the fundamental (1 064 nm), second harmonic (532 nm) and fourth harmonic (266 nm) outputs from a Q-switched Nd:YAG laser (pulse length 10 ns). Initial testing was carried out on new parchment to characterise the damage caused by overcleaning. The fluence and wavelength of the laser beam were then optimised so that any damage to the parchment or loss of ink during dirt removal from a late eighteenth century parchment document were minimised. The cleaned surfaces were examined by optical and scanning electron microscopy and analysed by measurement of the shrinkage temperature of cleaned collagen fibres. The laser-cleaned areas were compared with uncleaned areas and areas cleaned by traditional techniques.  相似文献   

20.
Leaves of common deciduous trees: the horse chestnut (Aesculus hippocastanum) and linden (Tilia spp.) from the park, near one of the most important cultural institutions, the National Library of Serbia, were studied as bioaccumulators of heavy metal (Cr, Fe, Ni, Zn, Pb, Cu, V, As and Cd) air pollution. The leaf samples were collected from the urban park exposed to the exhaust of heavy traffic. The May–September heavy metal accumulation in the leaves, and their temporal trends, were assayed in a multi-year period (2002–2006). Comparing the obtained concentration of the investigated elements from the beginning to the end of growing seasons, a significant rate of accumulation was determined for a majority of measured elements, and it was concluded that these tree species (horse chestnut and linden) can be used as bioaccumulators of the investigated heavy metals. The SEM-EDAX analysis of individual particles deposited on the leaves showed that the 50–60% belong to a class of fine particles (D < 2 μm), mainly of anthropogenic origin. Thus, the investigated tree species could be grown as a natural barrier against urban air pollution in the vicinity of libraries, museums and other buildings for cultural heritage storage.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号