首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
This study investigated the extent to which log-linear smoothing could improve the accuracy of common-item equating by the chained equipercentile method in small samples of examinees. Examinee response data from a 100-item test were used to create two overlapping forms of 58 items each, with 24 items in common. The criterion equating was a direct equipercentile equating of the two forms in the full population of 93,283 examinees. Anchor equatings were performed in samples of 25, 50, 100, and 200 examinees, with 50 pairs of samples at each size level. Four equatings were performed with each pair of samples: one based on unsmoothed distributions and three based on varying degrees of smoothing. Smoothing reduced, by at least half, the sample size required for a given degree of accuracy. Smoothing that preserved only two moments of the marginal distributions resulted in equatings that failed to capture the curvilinearity in the population equating.  相似文献   

2.
This article describes a preliminary investigation of an empirical Bayes (EB) procedure for using collateral information to improve equating of scores on test forms taken by small numbers of examinees. Resampling studies were done on two different forms of the same test. In each study, EB and non-EB versions of two equating methods—chained linear and chained mean—were applied to repeated small samples drawn from a large data set collected for a common-item equating. The criterion equating was the chained linear equating in the large data set. Equatings of other forms of the same test provided the collateral information. New-form sample size was varied from 10 to 200; reference-form sample size was constant at 200. One of the two new forms did not differ greatly in difficulty from its reference form, as was the case for the equatings used as collateral information. For this form, the EB procedure improved the accuracy of equating with new-form samples of 50 or fewer. The other new form was much more difficult than its reference form; for this form, the EB procedure made the equating less accurate.  相似文献   

3.
Three local observed‐score kernel equating methods that integrate methods from the local equating and kernel equating frameworks are proposed. The new methods were compared with their earlier counterparts with respect to such measures as bias—as defined by Lord's criterion of equity—and percent relative error. The local kernel item response theory observed‐score equating method, which can be used for any of the common equating designs, had a small amount of bias, a low percent relative error, and a relatively low kernel standard error of equating, even when the accuracy of the test was reduced. The local kernel equating methods for the nonequivalent groups with anchor test generally had low bias and were quite stable against changes in the accuracy or length of the anchor test. Although all proposed methods showed small percent relative errors, the local kernel equating methods for the nonequivalent groups with anchor test design had somewhat larger standard error of equating than their kernel method counterparts.  相似文献   

4.
Score equating based on small samples of examinees is often inaccurate for the examinee populations. We conducted a series of resampling studies to investigate the accuracy of five methods of equating in a common-item design. The methods were chained equipercentile equating of smoothed distributions, chained linear equating, chained mean equating, the symmetric circle-arc method, and the simplified circle-arc method. Four operational test forms, each containing at least 110 items, were used for the equating, with new-form samples of 100, 50, 25, and 10 examinees and reference-form samples three times as large. Accuracy was described in terms of the root-mean-squared difference (over 1,000 replications) of the sample equatings from the criterion equating. Overall, chained mean equating produced the most accurate results for low scores, but the two circle-arc methods produced the most accurate results, particularly in the upper half of the score distribution. The difference in equating accuracy between the two circle-arc methods was negligible.  相似文献   

5.
This study investigates the comparability of two item response theory based equating methods: true score equating (TSE), and estimated true equating (ETE). Additionally, six scaling methods were implemented within each equating method: mean-sigma, mean-mean, two versions of fixed common item parameter, Stocking and Lord, and Haebara. Empirical test data were examined to investigate the consistency of scores resulting from the two equating methods, as well as the consistency of the scaling methods both within equating methods and across equating methods. Results indicate that although the degree of correlation among the equated scores was quite high, regardless of equating method/scaling method combination, non-trivial differences in equated scores existed in several cases. These differences would likely accumulate across examinees making group-level differences greater. Systematic differences in the classification of examinees into performance categories were observed across the various conditions: ETE tended to place lower ability examinees into higher performance categories than TSE, while the opposite was observed for high ability examinees. Because the study was based on one set of operational data, the generalizability of the findings is limited and further study is warranted.  相似文献   

6.
This study investigated the effectiveness of equating with very small samples using the random groups design. Of particular interest was equating accuracy at specific scores where performance standards might be set. Two sets of simulations were carried out, one in which the two forms were identical and one in which they differed by a tenth of a standard deviation in overall difficulty. These forms were equated using mean equating, linear equating, unsmoothed equipercentile equating, and equipercentile equating using two through six moments of log-linear presmoothing with samples of 25, 50, 75, 100, 150, and 200. The results indicated that identity equating was preferable to any equating method when samples were as small as 25. For samples of 50 and above, the choice of an equating method over identity equating depended on the location of the passing score relative to examinee performance. If passing scores were located below the mean, where data were sparser, mean equating produced the smallest percentage of misclassified examinees. For passing scores near the mean, all methods produced similar results with linear equating being the most accurate. For passing scores above the mean, equipercentile equating with 2- and 3-moment presmoothing were the best equating methods. Higher levels of presmoothing did not improve the results.  相似文献   

7.
This study addressed the sampling error and linking bias that occur with small samples in a nonequivalent groups anchor test design. We proposed a linking method called the synthetic function, which is a weighted average of the identity function and a traditional equating function (in this case, the chained linear equating function). Specifically, we compared the synthetic, identity, and chained linear functions for various‐sized samples from two types of national assessments. One design used a highly reliable test and an external anchor, and the other used a relatively low‐reliability test and an internal anchor. The results from each of these methods were compared to the criterion equating function derived from the total samples with respect to linking bias and error. The study indicated that the synthetic functions might be a better choice than the chained linear equating method when samples are not large and, as a result, unrepresentative.  相似文献   

8.
The impact of log‐linear presmoothing on the accuracy of small sample chained equipercentile equating was evaluated under two conditions . In the first condition the small samples differed randomly in ability from the target population. In the second condition the small samples were systematically different from the target population. Results showed that equating with small samples (e.g., N < 25 or 50) using either raw or smoothed score distributions led to considerable large random equating error (although smoothing reduced random equating error). Moreover, when the small samples were not representative of the target population, the amount of equating bias also was quite large. It is concluded that although presmoothing can reduce random equating error, it is not likely to reduce equating bias caused by using an unrepresentative sample. Other alternatives to the small sample equating problem (e.g., the SiGNET design) which focus more on improving data collection are discussed.  相似文献   

9.
Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like the bootstrap method, to obtain standard errors of equated scores. Formulas are introduced to obtain the derivatives for computing the asymptotic standard errors. The approach was validated using mean‐mean, mean‐sigma, random‐groups, or concurrent calibration equating of simulated samples, for tests modeled using the generalized partial credit model or the graded response model.  相似文献   

10.
This article explores the amount of equating error at a passing score when equating scores from exams with small samples sizes. This article focuses on equating using classical test theory methods of Tucker linear, Levine linear, frequency estimation, and chained equipercentile equating. Both simulation and real data studies were used in the investigation. The results of the study supported past findings that as the sample sizes increase, the amount of bias in the equating at the passing score decreases. The research also highlights the importance for practitioners to understand the data, to have an informed expectation of the results, and to have a documented rationale for an acceptable amount of equating error.  相似文献   

11.
The purpose of this study was to assess the dimensionality of two forms of a large-scale standardized test separately for 3 ethnic groups of examinees and to investigate whether differences in their latent trait composites have any impact on unidimensional item response theory true-score equating functions. Specifically, separate equating functions for African American and Hispanic examinees were compared to those of a Caucasian group as well as the total test taker population. On both forms, a 2-dimensional model adequately accounted for the item responses of Caucasian and African American examinees, whereas a more complex model was required for the Hispanic subgroup. The differences between equating functions for the 3 ethnic groups and the total test taker population were small and tended to be located at the low end of the score scale.  相似文献   

12.
Practical considerations in conducting an equating study often require a trade-off between testing time and sample size. A counterbalanced design (Angoff's Design II) is often selected because, as each examinee is administered both test forms and therefore the errors are correlated, sample sizes can be dramatically reduced over those required by a spiraling design (Angoff's Design I), where each examinee is administered only one test form. However, the counterbalanced design may be subject to fatigue, practice, or context effects. This article investigated these two data collection designs (for a given sample size) with equipercentile and IRT equating methodology in the vertical equating of two mathematics achievement tests. Both designs and both methodologies were judged to adequately meet an equivalent expected score criterion; Design II was found to exhibit more stability over different samples.  相似文献   

13.
In this study I compared results of chained linear, Tucker, and Levine-observed score equatings under conditions where the new and old forms samples were similar in ability and also when they were different in ability. The length of the anchor test was also varied to examine its effect on the three different equating methods. The three equating methods were compared to a criterion equating to obtain estimates of random equating error, bias, and root mean squared error (RMSE). Results showed that, for most studied conditions, chained linear equating produced fairly good equating results in terms of low bias and RMSE. Levine equating also produced low bias and RMSE in some conditions. Although the Tucker method always produced the lowest random equating error, it produced a larger bias and RMSE than either of the other equating methods. As noted in the literature, these results also suggest that either chained linear or Levine equating be used when new and old form samples differ on ability and/or when the anchor-to-total correlation is not very high. Finally, by testing the missing data assumptions of the three equating methods, this study also shows empirically why an equating method is more or less accurate under certain conditions .  相似文献   

14.
Equatings were performed on both simulated and real data sets using the common-examinee design and two abilities for each examinee (i.e., two dimensions). Item and ability parameter estimates were found by using the Multidimensional Item Response Theory Estimation (MIRTE) program. The amount of equating error was evaluated by a comparison of the mean difference and the mean absolute difference between the true scores and ability estimates found on both tests for the common examinees used in the equating. The results indicated that effective equating, as measured by comparability o f true scores, was possible with the techniques used in this study. When the stability o f the ability estimates was examined, unsatisfactory results were found.  相似文献   

15.
This study investigated differences between two approaches to chained equipercentile (CE) equating (one‐ and bi‐direction CE equating) in nearly equal groups and relatively unequal groups. In one‐direction CE equating, the new form is linked to the anchor in one sample of examinees and the anchor is linked to the reference form in the other sample. In bi‐direction CE equating, the anchor is linked to the new form in one sample of examinees and to the reference form in the other sample. The two approaches were evaluated in comparison to a criterion equating function (i.e., equivalent groups equating) using indexes such as root expected squared difference, bias, standard error of equating, root mean squared error, and number of gaps and bumps. The overall results across the equating situations suggested that the two CE equating approaches produced very similar results, whereas the bi‐direction results were slightly less erratic, smoother (i.e., fewer gaps and bumps), usually closer to the criterion function, and also less variable.  相似文献   

16.
In observed‐score equipercentile equating, the goal is to make scores on two scales or tests measuring the same construct comparable by matching the percentiles of the respective score distributions. If the tests consist of different items with multiple categories for each item, a suitable model for the responses is a polytomous item response theory (IRT) model. The parameters from such a model can be utilized to derive the score probabilities for the tests and these score probabilities may then be used in observed‐score equating. In this study, the asymptotic standard errors of observed‐score equating using score probability vectors from polytomous IRT models are derived using the delta method. The results are applied to the equivalent groups design and the nonequivalent groups design with either chain equating or poststratification equating within the framework of kernel equating. The derivations are presented in a general form and specific formulas for the graded response model and the generalized partial credit model are provided. The asymptotic standard errors are accurate under several simulation conditions relating to sample size, distributional misspecification and, for the nonequivalent groups design, anchor test length.  相似文献   

17.
This study examines the effectiveness of three approaches for maintaining equivalent performance standards across test forms with small samples: (1) common‐item equating, (2) resetting the standard, and (3) rescaling the standard. Rescaling the standard (i.e., applying common‐item equating methodology to standard setting ratings to account for systematic differences between standard setting panels) has received almost no attention in the literature. Identity equating was also examined to provide context. Data from a standard setting form of a large national certification test (N examinees = 4,397; N panelists = 13) were split into content‐equivalent subforms with common items, and resampling methodology was used to investigate the error introduced by each approach. Common‐item equating (circle‐arc and nominal weights mean) was evaluated at samples of size 10, 25, 50, and 100. The standard setting approaches (resetting and rescaling the standard) were evaluated by resampling (N = 8) and by simulating panelists (N = 8, 13, and 20). Results were inconclusive regarding the relative effectiveness of resetting and rescaling the standard. Small‐sample equating, however, consistently produced new form cut scores that were less biased and less prone to random error than new form cut scores based on resetting or rescaling the standard.  相似文献   

18.
《教育实用测度》2013,26(4):383-407
The performance of the item response theory (IRT) true-score equating method is examined under conditions of test multidimensionality. It is argued that a primary concern in applying unidimensional equating methods when multidimensionality is present is the potential decrease in equity (Lord, 1980) attributable to the fact that examinees of different ability are expected to obtain the same test scores. In contrast to equating studies based on real test data, the use of simulation in equating research not only permits assessment of these effects but also enables investigation of hypothetical equating conditions in which multidimensionality can be suspected to be especially problematic for test equating. In this article, I investigate whether the IRT true-score equating method, which explicitly assumes the item response matrix is unidimensional, is more adversely affected by the presence of multidimensionality than 2 conventional equating methods-linear and equipercentile equating-using several recently proposed equity-based criteria (Thomasson, 1993). Results from 2 simulation studies suggest that the IRT method performs at least as well as the conventional methods when the correlation between dimensions is high (³ 0.7) and may be only slightly inferior to the equipercentile method when the correlation is moderate to low (£ 0.5).  相似文献   

19.
Accurate equating results are essential when comparing examinee scores across exam forms. Previous research indicates that equating results may not be accurate when group differences are large. This study compared the equating results of frequency estimation, chained equipercentile, item response theory (IRT) true‐score, and IRT observed‐score equating methods. Using mixed‐format test data, equating results were evaluated for group differences ranging from 0 to .75 standard deviations. As group differences increased, equating results became increasingly biased and dissimilar across equating methods. Results suggest that the size of group differences, the likelihood that equating assumptions are violated, and the equating error associated with an equating method should be taken into consideration when choosing an equating method.  相似文献   

20.
The synthetic function is a weighted average of the identity (the linking function for forms that are known to be completely parallel) and a traditional equating method. The purpose of the present study was to investigate the benefits of the synthetic function on small-sample equating using various real data sets gathered from different administrations of tests from a licensure testing program. We investigated the chained linear, Tucker, Levine, and mean equating methods, along with the identity and the synthetic functions with small samples (N = 19 to 70). The synthetic function did not perform as well as did other linear equating methods because test forms differed markedly in difficulty; thus, the use of the identity function produced substantial bias. The effectiveness of the synthetic function depended on the forms' similarity in difficulty.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号