首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
Organic-inorganic lime mortars were widely used in many ancient buildings due to their good performance in some fields (such as caking property, water repellency, weatherability, etc.). However, many ancient buildings and sites are suffering from various degrees of damage with the development of the economy and society and appropriate conservation and restoration are needed. The application of traditional construction materials, such as organic-inorganic lime mortars, attracts more and more attention in the conservation and restoration of ancient buildings in the recent years. So, the understanding of the components of original lime mortar which remained in ancient sites is of fundamental significance. In this work a set of analytical procedures to identify the organic additives in lime mortars by classical chemical analysis is proposed. The results show that using iodine-potassium iodide reagent, Benedict's reagent, reduction phenolphthalein reagent, Coomassie brilliant blue and sodium periodate oxidation glycerin acetyl acetone method could effectively detect a small amount of starch, reducing sugar, blood, protein and fatty acid ester that remained in ancient buildings’ lime mortars, respectively. These analytical methods are easy to operate with low detection limit, high accuracy and some other advantages.  相似文献   

2.
Historical evidence on the use of mortars to meet several needs has existed for millennia. With reference to the characteristic historical periods of the city of Rhodes, mortar sampling was performed on historical constructions, masonry and architectural surfaces. In the present work the different mortar technologies are investigated aiming to answer questions regarding their finality, i.e. whether their differences arise mainly from the various historical periods of construction or from the purposes they had to serve, imparting to the mortars the properties required by their function in the structure. Mineralogical, chemical, physical and mechanical investigations have been performed on characteristic samples after gradation. The exponentially declining function of the ratio CO2/H2O structurally bound to the CO2 content shows a continuous evolution of the kinetics governing the various mechanisms of carbonation of the binder or the formation of hydraulic components during setting, hardening and ageing of the mortars. The grouping of mortars in well-distinct ‘hydraulic levels’ is ascribed to the physico-chemical cohesion and adhesion bonds developed at the matrix and matrix/aggregate interfaces, respectively, allowing for the mortars to either bear continuous stresses and strains as joint mortars or provide compact impermeable renderings which harden even more on contact with water. Hence, parameters determining the diversification of the resulting mortar/matrix types concern the raw materials employed as binding materials and the production processing.  相似文献   

3.
Mercury porosimetry was applied to the study of pore structure of the historic Roman cement mortars representative of different locations in Europe and time periods as well as different application techniques from architectural castings to in situ formed renders and profiles. Three categories of pores were found to coexist in the mortars. The finest pores, with diameters below 0.1 μm, are present within the hardened aged Roman cement matrix. The larger ‘air’ pores, with diameters between 0.2–2 μm, are due to the evaporation of the excess unbound water and restricted hydration. Pores larger than 2 μm are rare and, in general, can be related to microcracking induced by shrinkage drying and mortar weathering. The mortars have rarely been found to develop a dense fine-porous microstructure characteristic of the ideal conditions of moist-curing; massive architectural castings being the only exception identified. The presence of larger ‘air’ pores was, in turn, almost universally observed. The investigations of the freshly prepared Roman cement mortars have revealed that the restricted hydration could be due to the exposure of the freshly laid surface to dry real-world external environments, a high water-to-cement ratio in the original mortars, or the drawing of water from the stucco mass due to insufficient pre-wetting of the porous masonry. The insufficient reactivity of historic cements, resulting from a high content of over-burned, non-reactive cement components or coarseness of the cement grains, could be another reason for yielding poorly hydrated mortars in the past. In general, Roman cement stuccoes are in an excellent state of preservation in spite of their usual exposure to polluted urban environments for more than a century. Therefore, the coexistence of Roman cement mortars of widely different pore structures has not brought about any problems of incompatibility which field observations could reveal. The Roman cement repair materials have been found to develop pore structures similar to those of historic mortars. Therefore, they are in broad terms compatible with historic masonry or stuccoes. However, the porosity and strength of the repair materials can be controlled by a careful manipulation of the water-to-cement ratio of the mix to adapt them better to the properties of the host material.  相似文献   

4.
Very few scientific studies have been performed so far on ancient and modern hydraulic mortars. The effects of atmospheric multi-pollutants on hydraulic mortars used in monuments and historic buildings in urban areas, especially those linked to dry and wet carbon and sulphur deposition, remain in need of thorough investigation. In the literature, studies on damage typology identification, composition and origin and relative quantitative data are both scarce and rather poor in quality. While the sulphate source from marine spray deposition and water capillary rising are known, atmospheric sulphur effects on mortars still require elucidation. Ancient and modern hydraulic mortars have been collected from the Arsenal of Venice. The original material characterisation and the evaluation of the surface damage due to atmospheric pollution are presented along with a comparison of the data obtained for the cement and cocciopesto mortars.  相似文献   

5.
This research focuses on the characterization of historical mortars collected from a covered dockyard, called tezone 105, erected in the Arsenal of Venice during the XVI century. The mortars date back to different building phases. A stratigraphical analysis of tezone 105 has proposed a chronology of building interventions. The building phases recognized by the stratigraphical analysis belong to the original structure (XVI century) and to later interventions from XVI to XX century. Mortar samples are investigated by granulometric analysis, infrared spectroscopy (FT-IR), simultaneous thermal analysis (DSC/TG) and X-ray diffraction analysis (XRD) in order to identify the technology peculiar of each building phase. Mortar sampling was carried out on indoor masonry and foundation. Masonry mortars appeared to be characterized by the application of air-hardening binders, whereas foundation mortars were characterized by hydraulic binders.  相似文献   

6.
The knowledge of the morphological and mechanical properties of masonry walls is very important for the refurbishment of ancient buildings, particularly when the requirements of both structural safety and historical preservation must be fulfilled. The masonry is not of homogenous material: its mechanical properties depend on stones, mortar, and texture which are very variable due to their dependence on the historical periods and the geographical area of the erection. For this reason, a deep knowledge of masonries built in different sites and historical periods is essential in order to evaluate both the capacities of bearing vertical load and the seismic vulnerability of the masonry structure. Three fundamental typologies of tuff masonry have been defined: they are the characteristics of different historical periods from the XVI to the XX century. The models are in full-scale in order to reproduce the three defined chronotypes. Original tuff stones quarried in the corresponding historical period, mortars similar to the original ones, reproduced according to ancient documents and original constructive techniques have been used for the construction of the specimens. Compression tests performed in displacement control have been carried out on the masonry models in order to determine the maximum resistance of the material and the corresponding strain, the ultimate strain and corresponding residual strength. In this paper, the procedure used for making the specimens and for experimentally evaluating the mechanical properties of post-medieval Neapolitan yellow tuff masonry are illustrated and the obtained results, even in terms of plastic capacity of these kinds of masonry, are reported.  相似文献   

7.
The present paper reports a new method for converting ettringite and thaumasite in non-expansible and insoluble phases, for its application in the restoration of concrete artefacts subjected to deterioration through sulphate attack. The salts were synthesized by different processes and, after characterization by means of XRD, FT-IR and optical microscopy, were treated with a series of chemicals in order to induce their decomposition. In particular, different solutions containing barium nitrate, barium hydroxide and ammonium oxalate were used to achieve the complete transformation of both phases in barite, witherite, scarbroite and whewellite. Barium hydroxide seemed to be the most appropriate reactant because the others could give rise to efflorescence within the pores of the mortars by leaving free nitrate or sulphate ions inside the materials. The experimental technique was also tested on two concrete samples collected from the bell-tower of St. Nicholas’ Cathedral in Nicosia (Sicily) with encouraging results.  相似文献   

8.
The Grotta of Buontalenti (GB) was built at the end of the 1500s during the Medicean period. One of the rooms that constitutes the Grotta is decorated with mosaics composed of tesserae of stained glass. The GB underwent several restorations, which took place between the end of the 1700s and 1980s, which are poorly described and documented, leading to some uncertainties about the extent and phase(s) of restorations of the mosaics. The original tesserae and mortars of the GB were analysed for their mineralogical and chemical composition. Results indicate that glass tesserae have a common sodic base composition. Cluster analyses, however, performed considering the glass base composition (i.e. SiO2, K2O, Na2O, MgO, CaO, and Al2O3), identify three groups of samples: A, B, and C. A and B are characterised by chromophores such as Se and Cr suggesting a recent age (50–150 years) of the tesserae. On the contrary, chromophores (Fe, Mn, Cu, Co) and opacifiers (mainly SnO2, Pb2Sb2O7, Ca2Sb2O7) of the third group (C) indicate a preparation procedure known since ancient times. Based on their mineralogy and petrography, four different types of mortars were recognised. The mortars cannot be precisely dated. However, by matching their composition with that of the glass tesserae, it can be concluded that one type of mortar may be of the Medicean period, whereas the others are relatively recent, probably of this century. This evidence, in accordance with historical data, points to a Medicean age of group C tesserae. Restorations of the GB involved partial substitution of the mortars whereas the glass tesserae were largely recycled with limited addition of new materials.  相似文献   

9.
The survey of materials constituting the buildings of the ancient city centre of Naples and of their decay typologies was carried out. Reports were entered in a database which enabled us to draw two thematic maps in a digital format: one of materials and lithotypes, and one showing weathering. On this basis, quantitative evaluations of the lithotypes were carried out. The research pointed out that the use of different lithotypes was mainly as a result of their availability and/or ease of exploitation. Furthermore, the importance of the preservation of the quarrying sites was stressed, both for their historical and cultural interest and, above all, for possible forthcoming provisioning finalized to restorations. The analysis of the results, made on a geo-mineralogical basis, as well as the thematic maps, gives a basic tool which will be very useful to those professionals involved in preservation of cultural heritage.  相似文献   

10.
Lime renders are of great importance not only to enhance the appearance of the buildings, but also to protect and preserve old masonries. They constitute a specialized system, composed of several layers, in which each of them depends on the others and carries out some specific functions in order to assure a suitable performance of the whole. Knowledge of the traditional materials and techniques, as well as the know-how, is one of the key points in the maintenance and conservation of lime renders and, by extension, of our Heritage. However, the promotion of the use of cement and the industrialization process, which in the case of Spain took place about the 1960's, caused lime mortars to fall into disuse. In this article, classical treatises as well as the state-of-the-art researches were analysed to compile the properties of lime render layers, on the whole. The knowledge of these characteristics is essential to maintain and repair the existing renders as well as to formulate new compatible ones, while assuring their durability and appropriate performance. Lime is the selected binder for these recommendations because it was widely used as drawn from the literature.  相似文献   

11.
Analysis of historic mortars including Islamic, Gothic and later ones taken from palaces, convents and mansions in Palma de Mallorca has been carried out. Scanning electron microscopy (SEM) coupled to energy dispersive X-ray spectrometer (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) techniques were used to characterise the morphology and analytical composition of the samples analysed. Generally, covering plaster mortars presented a low percentage of small size aggregate. The reported results show that mixed and lime mortars have been used, thus, the establishment of a relationship between the type of mortar employed and its age is not feasible. In the painted mortars, polychromy has also been studied. The most common pigments to be found are natural earths.  相似文献   

12.
Two different analytical approaches have been taken into account to investigate the role of Si-rich phases in enhance hydraulic reactions of bedding mortar mixtures from San Lorenzo Church in Milan (Northern Italy) and from the Medicean Aqueduct in Pisa (Central Italy). In the first case, mortars show clear hydraulic type reactions in the form of coronal layers between the reacting additive and the binder mass. In the second one, the hydraulic reactions do not develop visible mineral phases and processes have been inferred from chemical, mineralogical analyses and mass balance calculation. The microstructural studies not always are sufficient to understand the complex dynamics of reaction attained during pre-industrial manufacturing processing of mortars and related binders. In fact, if the reacting raw materials are fine-grained and/or have remarkable chemical reactivity, no relicts are preserved by mortar microtextures.  相似文献   

13.
The vaults of the Saint Peter basilica in Vatican (Rome) are decorated with mosaics whose realisation is dated to the end of the 16th century. The mortar layers beneath the mosaics are realised with the so-called “Roman stucco”, a kind of mastic specifically employed as a binder in the mosaic's supporting layers. Its empirical recipe was known and reported by 18th century authors, accounting for the use of lime, travertine powder added to a mixture of herbs and linseed oil. A recent restoration of the mosaics has allowed to characterise the mortars from a compositional point of view by individuating the inorganic mineralogical fraction and by chemically characterising the organic components. The study of stucco samples has been performed through polarising microscope observations, X-ray diffraction (XRD) analyses, thermal analyses (TA) (thermodifferential-DTA and termogravimetric-TGA analysis), Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) spectroscopy, pyrolysis-gascromatography (PY-GC)–mass spectrometry. The analyses have allowed to distinguish between original stucco, produced and utilized at the same time of the realisation of the mosaics, and other mortars, presumably employed in later times during restoration interventions. The outcomes of the mineralogical investigation and TA indicate the presence of four different types of stuccos, here considered as four characteristic groups. The mineralogical analyses indicate that all the samples are constituted of two main phases: calcite and vaterite and the TA, beyond the quantification of the calcium carbonate content, have shown the presence of organic components in the stucco. The organic fraction was characterised by PY-GC–mass spectrometry, confirming the presence of the linseed oil cited in the ancient recipes. The very interesting outcome of this study is the occurrence of the rare calcium carbonate polymorph vaterite. The ATR-FTIR spectroscopy on the stucco gives further contribution to a better understanding of the FTIR spectrum of the rare mineral and an explanation of its formation is tentatively given.  相似文献   

14.
The present work was one of the first attempts to analyze the conservation status of two ferrotypes, ancient photographic plates realized on a support made of iron. The photographic material was constituted of collodion as binder for the photosensitive silver halides grains. The two ferrotypes studied belonged to a private collection of a family from Durham, UK, and were made at the end of the 19th century. The analytical techniques used for the morphological and physicochemical characterization were noninvasive. The surface morphology was studied by means of optical microscopy (OM) and environmental scanning electron microscopy (ESEM) coupled with an energy dispersive X-rays (EDX) system for the elemental analysis. These techniques, together with microreflectance Fourier transform infrared spectroscopy (μ-FTIR) and contact angle, allowed to obtain information on both the chemical – elemental – composition of the materials constituting the ferrotypes, and the conservation status of these photographic plates. The study showed that the physicochemical diagnostics allowed to characterize the two ferrotypes that, despite their similar age and provenance, showed different conservation status, surface properties, and elemental composition.  相似文献   

15.
The use of a scanning electron microscope equipped with a microanalytical system is proposed for characterising ancient mortars. A calculation procedure is presented that allows a determination of the binder and aggregate compositions (including volatile components) from microprobe data collected on the binder, and chemical, mineralogical, petrographical and physical data collected on the mortar bulk sample. The proposed procedure is applied to 11 mortar samples from three historical monuments built in Pisa throughout the Middle Ages. The binder of the analysed samples consists of a carbonate crystalline fraction and an amorphous carbonate-free fraction that makes up from 20 to 60 % by weight of the binder. The aggregate composition, on average, is close to that of the Arno River sands.  相似文献   

16.
The ‘Cotto Variegato’ are tiles used in Lombardy, between the XVII and XIX centuries as flooring for several historical buildings. Tiles are produced by the processing of two compositionally distinct clays. The main stylistic character of these tiles is a banded texture producing a veined aspect, in which white and red bands are also folded. The artefacts were hand crafted using two clayey raw materials of different composition, that are only partially mixed before the firing. The colour differences are produced during the firing. In all samples white and red portions are always composed of Ca-rich and Ca-poor clay, respectively. The multi-layered texture was obtained by a multiple folding and pressing process of the mixture. The interference of fold limbs with the tile surface gives the ‘variegato’ style to tiles. The paper explains how basic petrological knowledge can be applied to the study of ceramic artefacts in order to define provenance of the raw material, firing technology and how ancient craftsmen transformed the natural clayey materials into floor tiles. The methodological approach is that commonly applied to the study of the rocks and consists of textural analyses, at a different observational scale, combined with X-ray powder diffraction, X-ray fluorescence and microprobe analyses.  相似文献   

17.
  相似文献   

18.
As part of a working definition of a new code of practice, this paper develops a methodology to determine the suitability of plasters manufactured on-site to protect the earthen walls of vernacular architecture buildings. Given the diversity of raw earth construction types, ranging from massive earth to stone masonry with earth mortars, and the variability of the materials used, two on-site tests (a shrinkage test followed by a shear test) were proposed. Those tests, as well as additional tests, were performed with lime/sand, earth/sand and earth with plaster admixtures. Lime/sand plasters do not typically pose shrinkage issues, which is why more earth based specimens were tested than lime based specimens. An analysis of the on-site testing complemented with laboratory tests reveals an antagonistic control of the bond between earth plaster and earthen wall based on clay content: an increase in the plaster clay content leads to increased bending strength, which strengthens the plaster and increased shrinkage, which weakens the plaster-wall interface. The heterogeneity of the wall leads to a wide range of results; therefore, this study was conducted to validate the formulation of plasters by means of shrinkage and shear tests at five different points on the wall. The shrinkage test allows finding the earth plaster formulations. Among all the validated formulations, the mason chooses the best one thanks to two criteria: the best workability (which is variable according to masons) with the highest clay content as possible. Then, when the formulation is chosen, the shear test must be done to verify if the bond between the plaster and the wall is high enough. This series of tests allows masons to validate formulations that will ensure good mechanical resistance of the plasters that protect buildings of vernacular earthen architecture.  相似文献   

19.
Papermaking has a special place in the cultural heritage of China. Papers made from different types of plant fibers were, and are still used for particular applications. Bamboo paper is a handmade paper that has been traditionally used for book printing and restoration of ancient paper objects since antiquity in China, whereas Xuan paper, the subject of recent previous study, is used for traditional Chinese calligraphy and painting. Following our previous approach on Xuan paper, four modern Bamboo papers manufactured using traditional or chemically-facilitated techniques were artificially aged by UVA radiation and changes to their optical properties were evaluated by reflectance and 3D-fluorescence spectroscopies. Paper samples produced by different methods displayed different fluorescence spectra and UVA photolysis of paper resulted in decreases in the fluorescence intensities and reflectance values, manifested as differing photoyellowing of the papers. Assays of reactive oxygen species, ROS, revealed that papers made by chemically-assisted pulping methods generally produce more hydrogen peroxide or superoxide radicals than those made by traditional methods, which correlates with their relative yellowing rates. Different spatial distributions of calcium and chlorine were also observed by SEM/EDS analysis in the chemically-manufactured papers, probably arising from the specific pulping and/or bleaching chemicals used in their manufacture.  相似文献   

20.
A KrF-excimer laser operating at λ = 248 nm was used for basic studies in cleaning ancient glass surfaces. For irradiation a mask projection technique was applied. A modified optical set-up was designed using cylindrical lenses for large area removal by line scanning. Previous investigations revealed insufficient knowledge about interaction processes between UV-laser radiation and individual surface layers of encrusted historical glass. Thus, first detailed studies were carried out on special model glass samples simulating the behaviour of historical glass. The potential of removing crusts, bio layers as well as layers of different conservation materials (due to former conservation work) were examined. The avoidance of damaging material such as gel layers, paint layers or the bulk glass was of great importance. Removal rates and thresholds for the materials mentioned above were carried out. The collected data enables a comparison and evaluation of the feasibility for the removal of superficial layers from historical glass artefacts. The results indicate that in some cases a closed loop process control will be necessary to avoid over-cleaning.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号