首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The oil painting “La Medusa” executed by Caravaggio at the end of the XVI century on a wooden shield, was investigated by integrated physical–chemical and analytical methodologies in order to obtain scientific data capable of elucidating the state of conservation and the painting technique. Optical (OM) and electronic (SEM-EDS) microscopy, micro-FT-IR spectroscopy, gas chromatography–mass spectrometry (GC–MS) and pyrolysis GC–MS were applied on two microfragments and some organic samples obtained by solvent extraction using the swab cleaning technique. The obtained results indicated that Caravaggio probably reused an old shield as a previous gypsum preparation layer has been detected under the original painting layers. He used white lead, natural earths, verdigris and lead–tin yellow type I mixed with drying oils to paint. The considerable amount of amorphous particles of copper chlorides found in the green pigment verdigris suggests that it could have been produced according to the ancient recipe of verde salsum described by Theophilus. Mordant gilding has been identified on the upper part of the shield that can be related to an abandoned experiment to give the painting a mirror-like reflecting effect. Three different varnishes layers have been detected above the painted surface. The original and restoration varnishes have been identified and they contain a mixture of drying oil, mastic and turpentine and some beeswax. Cleaning tests, performed with different organic solvents, suggest the use of isopropyl alcohol as cleaning agent because it is less efficient in comparison to others solvents; thus it ensures a careful and controlled removal of the varnishes.  相似文献   

2.
A significant number of archaeological finds of the 13th–16th century from the Tuscan sites of Germagnana and Gambassi in Valdelsa—FI, was studied by different physico-chemical investigations (SEM–EDS, ICP, Mössbauer spectroscopy, XRD, XRF, TG-DTA) in order to contribute to clarify the production methodology and the pre-industrial glass manufacture technology. The studied samples are mainly non-vitreous finds as production waste, refractory materials, crucibles and raw materials; also vitreous finds as frits, skims, glasses (glass masses, glass working waste and finished products) have been taken into consideration. The obtained petrographic and physico-chemical data strongly suggest that both Gambassi and Germagnana glass manufactures were strictly connected with the sources of vitrifiable materials, situated in Tuscan sand quarries. In particular a comparison between sands from the neighbouring quarries and appropriate finds of the two archaeological sites evidences that the employed vitrifiable materials possibly belong to La Casina La Cava resort. The archaeological classification, based on macroscopic observation and stratigraphic position, was compared and verified with the scientific classification of the examined finds of Germagnana and Gambassi sites based on their composition, morphology and physico-chemical properties.  相似文献   

3.
Twenty lead finds, unearthed in Late Bronze–Early Iron Age levels at the Santa Barbara nuraghe situated at Bauladu in Sardinia (Italy), have been examined. Their chemical composition has been determined using the ICP-MS plasma-mass technique (Cu, Fe, As, Ag, Sn, Sb, Bi, Zn, Cs, Tl, Mo, Cd, In, Te, W, Th, U, Li, Se). Lead isotope ratios (208/206, 207/206, 206/204) have also been determined. The results are discussed in relation to the mineral source and some aspects of the metal extraction processes. The finds are composed of high purity lead obtained using a smelting at low temperature. Based on the isotope ratios it has been possible to establish that the metal originated from Sardinian ore deposits type.  相似文献   

4.
Fifty crucible fragments and 10 fragments of the melting furnace of the forest glassworks of Südel (1723–1741, Ct. Luzern), were analyzed by petrographic, mineralogical and chemical techniques in order to assess the temperature reached in the melting chamber and to find out which raw materials were used to make the crucibles and the melting furnace. Since the crucibles were used in the melting furnace, the temperature estimations were based on both the crucibles and the refractory fragments, as they were parts of the same system. The temperature range in the melting chamber, estimated by the structural order of the new-formed cristobalite, points to a temperature range between 1350 and 1500 °C. However, three crucible samples recorded extreme temperatures as high as 1650 °C, suggesting very high flame temperatures for wood fuel. The analyzed red bricks were made with local calcium-poor clay. One of them was tempered with refractory fragments, demonstrating an in-house production and the recycling of such a material after its use. The crucibles and the refractory bricks were made with the same refractory clay. The former using unprocessed clay and the latter blending clay with chamotte. A comparison with Sidérolithique clayey sand samples from the Swiss Jura, shows strong affinities which may rule out the archaeological hypothesis of an exclusive provenance of such clays from Germany, suggesting an import from the Swiss Jura mountains.  相似文献   

5.
The sarcophagus containing the remains of Federico II, located in the Cathedral of Palermo (Sicily, Italy), was opened on 1998 to perform a multidisciplinary survey [1]. Next to the remains of Federico II and in close contact with them were laying two other skeletons belonging, according to historical records, to Pietro II di Aragona and to an anonymous person (“The Third Individual”), probably a woman. The bones appeared severely deteriorated. Chemical analysis performed on bone samples excluded that the bodies underwent some kind of embalming process. The analysis of mtDNA from bone samples taken from the three skeletons was successful in only one of the two labs involved. The HVR1-mtDNA sequence (region: from nt 16,035 to nt 16,395), obtained from the bone samples of Federico II and “The Third Individual” appear identical but bear double peaks at the same nucleotide positions, suggesting mixing (i.e. contamination) of different mtDNA types. The HVR1 sequence obtained from the bone sample of Pietro II di Aragona does not present double peaks and differ from the Cambridge Reference Sequence (CRS) at six nucleotide positions. Cloning experiment of the Federico II amplicon demonstrated that the mixed mtDNA types are only two: one identical to CRS, the other identical to the sequence of Pietro II di Aragona. A reconstruction of these data are proposed in the Discussion. Due to the problematic context in which this study was carried out (mixed and deteriorated biological material, failure to replicate results in two different labs), our results and reconstruction can only be offered on a tentative basis. It is hoped that the data presented in this study will reveal useful, for future comparison, if further molecular genetics research will be carried out on the royal dynasties that ruled Sicily in the early centuries of the past millennium.  相似文献   

6.
Along the Umbria-Marche stretch of the Flaminia Consular Road (220 B.C.) several archaeological finds of the most important monumental works, are well preserved. The stones, employed to build many bridges, substructions and sewerages, are represented by carbonatic breccias whose geological environment of formation and source areas had never been established. On the basis of mineralogical, petrographic and micropalaeontological analyses, two groups of these lithotypes employed in Roman age were distinguished: “monogenic carbonatic breccias” only constituted by clasts of the Maiolica Unit (Late Jurassic – Early Cretaceous) and “polygenic carbonatic breccias” made of fragments (in different proportions) of Calcare Massiccio (Early Jurassic), Corniola (Early Jurassic), Maiolica (Late Jurassic – Early Cretaceous) and Scaglia Rossa (Late Cretaceous – Early Paleogene) Units. The possible source areas of the breccias are compatible with stratified slope-waste to scarp-base deposits of periglacial origin belonging to the Upper Pleistocene. In particular, among the seven investigated areas, we pointed out the most probable provenances (Monte Faeto-Colle, Costacciaro, Scirca, Foci, Secchiano) along the flanks of the Apennine Mesozoic chain of the Umbria and Marche regions. Although the Romans could have exploited the whole thickness of some outcrops (now disappeared) of these carbonatic lithotypes at the deepest part of the valleys, we have constrained a local provenance of the breccias so commonly used in the monumental works of the Flaminia.  相似文献   

7.
The analysis of the amino acid (AA) content in fragments derived from a prehistoric rock pictograph (Lancusi rock shelter) at Tadrart Acacus, southern west Libya, revealed the presence of material containing peptides differing in solubility in hot acidic or alkaline solutions, as well as in AA composition and racemization. Water-soluble components were constituted of low molecular weight peptides with high racemization of aspartic acid and alanine, whereas the water insoluble material consisted of species of a more complex AA composition and a different degree of racemization. The proteinaceous materials were assumed to originate from matter that had undergone over time different diagenetic processes. The water insoluble peptide-containing material was separated from the rock substrate by acid hydrolysis, dried and the resulting residue submitted to radiocarbon analysis. Accelerator mass spectrometry (AMS) yielded an approximate age of 6145 ± 70 years B.P. (before present), which is consistent with archaeological inference and the climatic reconstruction of central Sahara. To our knowledge the present work represents the first attempt of direct radiocarbon dating of rock art in the Sahara desert.  相似文献   

8.
Due to the extreme fragility of paper-based artefacts, few techniques are available for scientific investigation and characterisation of ancient drawings or paper-based artefacts. Image reflectance spectroscopy represents an almost unique tool for scientific analysis on precious drawings, for which even micro-invasive techniques of analysis cannot be used. Indeed, beside the high fragility of the support, drawings and graphical works are typically characterised by a very limited number of artistic materials, which in principle could give information on the work of art. In this paper an interdisciplinary study on a set of drawings by Parmigianino (1503–1540), selected from the collection of the Uffizi Gallery in Florence, is presented. Non-invasive measurements of image spectroscopy (IS) have been employed to support the work of art-historians in the critical re-examination and interpretation of the graphical work of the artist. The multispectral analysis has been carried out over the extended spectral region (400–1700 nm), in order to provide simultaneous indications both on the pictorial materials and on possibly underlying hatches. The data processing has been performed by means of Principal Component Analysis (PCA) and the elaboration of each case has been addressed to specifically respond to questions related to the art-historical problem.  相似文献   

9.
Within the framework of an excavation project aimed to systematically characterize the various aspects of settlement and activities in Northern Jordan, a considerable collection of slag lumps and iron artifacts of different forms and typologies excavated from the archaeological site of Barsinia were collected. Excavations have revealed other metallurgical materials such as pottery tuyeres and furnace-like structure. Studying those finds was important because of their archaeological and technological interests. For the analytical and metallurgical study, X-ray diffraction was used to identify the mineralogical composition of samples. Inductively coupled plasma-optical emission spectrometer, energy dispersive X-ray and X-ray fluorescence spectrometer were used to determine the accurate elemental composition of these finds. Furthermore examinations by using metallographic, polarizing microscope and scanning electron microscopy were employed to diagnose the characteristic morphology and environmental effects of these archaeometallurgical finds. Microstructural investigations emphasized that iron production processes were performed locally at the archaeological site of Barsinia even if the iron ores were imported from other mining location in Jordan. Direct or “bloomer” was the main method used for smelting iron ores followed by smithing methods to locally produce iron artifacts. This, most probably, was the state of technology from the Bronze Age to the Byzantine period. To ensure the stability of these deteriorated finds for future research, required treatment and conservation processes were successfully carried out.  相似文献   

10.
During the restoration plan of the famous painting “Madonna col Bambino e S. Giovannino” by Sandro Botticelli, located in the Museo Civico of Piacenza (Italy), a study on painting materials was carried out. The pigments, the binders and the materials used for the application of ground and priming layers were studied using micro-Raman spectroscopy, gas chromatography coupled with mass spectrometry (GC/MS), optical and electronic microscopies. Gypsum and anhydrite were found in the ground layer, while carbon black and lead white were used in the priming layers. The precious pigments of the artist's palette and the binders used (egg and animal glue) were determined.  相似文献   

11.
The dynamic social development in Iran over the last decades provided the acknowledgement of the archaeological heritage on the one hand, and a confrontation to the current managing system of archaeology on the other. This situation makes it necessary for archaeologists to formulate and implement a systematic regulation in the sphere of protection and management of the archaeological heritage. The fact is that, as the international conventions warn, the archaeological heritage is constantly under threat of destruction, and while in Iran the problem is not new, the destruction is on the increase. The constructions under the developmental projects and at the same time the increase of population are accompanied by the expansion of the new settled areas threaten large areas of archaeological sites. The deep economic crises of the country as well as a pauperization of majority of society, and a low degree of respect for the law, lead to an increase in looting and considerable damage to the archaeological heritage. The goals of this paper are (1) to identify problems that hinder the effectiveness of the Iranian national protection acts, and to suggest some way in which these problems could be remedied, (2) to promote further academic discussions of problems and solutions within archaeology and related fields, and (3) to encourage official authorities and other interest groups to press for changes needed in the Iranian national protection policies, to make it better serve the public interest.  相似文献   

12.
The sculptural polychromy in the Zhongshan Grottoes, sited in northwest China, has been investigated in terms of chemical composition of employed materials and pigments, state of conservation and painting technique. Raman analysis, Fourier-transform infrared analysis, analysis through energy-dispersive X-ray spectrometry coupled to scanning electron microscopy and pyrolysis coupled to gas chromatography and mass spectrometry were applied. Six analyzed samples showed silicates and kaolin as main components of the ground layers. Also lead white has been found in these layers. Minium, red-earth and mercury sulfide are the red pigments detected in the polychromy. A mixed use of malachite and atacamite has been detected in three green samples. Optical characteristics of atacamite and malachite found in the samples indicate a synthetic origin. The presence of a synthetic organic pigment such as phthalocyanine chlorinated pigment was also revealed. Ultramarine blue pigment, obtained by purification of lapis lazuli, has been detected in the blue sample. As for the binders used, fatty materials and siccative oil were found.  相似文献   

13.
Wool samples collected from thirteen Arraiolos carpets from the 17th–19th century belonging to the National Museum of Ancient Art (NMAA, Lisboa, Portugal) collection were analysed to identify the natural dyes and mordants employed in the traditional dyeing process, in a way to complement and improve actual knowledge on this rugs. Natural dyes were extracted from Arraiolos historical wool fibres using a mild extraction method, followed by high-performance liquid chromatography with diode array and mass spectrometry detection (HPLC-DAD-MS) for compound identification. Colourimetry was used to measure colour parameters in all historical samples. Quantification of mordants in the historical fibres was carried out by inductively coupled plasma-mass spectrometry (ICP-MS). Weld, indigo, spurge flax, brazilwood, madder and cochineal were identified as dye sources in the fibres. Alum was the most commonly used mordant, but the presence of iron and zinc was also detected in some darker samples. The use of madder and cochineal is not referred in the available historical dyeing recipes. This study also proved that the actual visual perception of these carpets is strongly affected by the natural dyes photodegradation, which was mostly unaccounted for before.  相似文献   

14.
Optical and SEM-EDS microscopy, X-ray powder diffraction and micro FT-IR spectroscopy investigations of the funerary klinai (couches) of Tomb 1 from Amphipolis and a stone sarcophagus from ancient Tragilos—two painted monuments made by Macedonian craftsmen of the Early Hellenistic period—identified the original materials and painting technique, as well as synthetic materials used as consolidants during past restoration treatments. The original organic binders and the superficial modern coatings have been identified by micro FT-IR spectroscopy applied directly to the sampled powders or tiny fragments and to their solvent—soluble fractions. The pigments identified on the couch of Amphipolis are: red and yellow ochre, cinnabar, Madder lake, paratacamite and antlerite, carbon black, calcium carbonate, kaolin and gypsum. The identification of egg and animal glue confirms the application of tempera and secco techniques. The detection of polymers such as polydimethylsiloxane, polyvinyl acetate and alkyd resins, is related to modern restoration products. The pigments attested on the paintings of the Tragilos' sarcophagus are: red and yellow ochre, Egyptian blue, malachite, carbon black, calcium carbonate and gypsum. The absence of organic binders combined with the constant presence of calcium carbonate in all the examined samples suggests the use of lime as the binding medium in the painted decoration of the sarcophagus. The presence of Paraloid B72 is related to recent conservation treatments.  相似文献   

15.
The scientific approach to the restoration and monitoring of mural paintings, at S. Girolamo Chapel – SS. Annunziata Church in Florence, is reported as a fruitful example of the synergic collaboration between restorers and scientists in the planning and development of conservative interventions. Before restoration, the painting technique and the state of preservation of the pictorial cycle have been investigated firstly by close examination of the painted surfaces and then by optical and/or SEM-EDS microscopy and μFT-IR spectroscopy on appropriately selected samples. In particular, the original constituent materials and those belonging to subsequent restorations were characterized together with those originating from decay processes. In this mural painting cycle, a peculiar “fresco” technique has been used although an auxiliary binder for pigment distemper has been also employed. The use of this technique, sometimes in an improper way together with uncorrected restoration interventions, are the main responsible of the unsatisfactory state of conservation of many painted areas. Preliminary conservation trials and scientific studies were carried out to design the most convenient restoration intervention and to verify the correctness and non-invasive of the necessary operations. Special attention was devoted to cleaning procedures, continuously monitored by a physico-chemical methodology, mainly based on microinvasive, microscopic and spectroscopic investigations, to evaluate the efficiency, advantages and drawbacks of the proposed cleaning procedures and define the most appropriate ones. Finally, specific decay markers have been recognized, by a comparison of the results obtained from the detached samples with those deriving from artificially aged models, to be used for a correct future monitoring and maintenance of the wall paintings.  相似文献   

16.
There is little information in the conservation literature with respect to artists’ alkyd paints; thus, artists and conservators are somewhat at a loss about how to use and treat alkyds. Recently, analytical methods have been developed to identify the components in these polymers (oil modified polyesters), rates of cross-linking and mechanical properties. Presented in this paper are some of the characterization results of artists’ alkyd paints using THM (thermally assisted hydrolysis and methylation) gas chromatography– mass spectrometry (THM–GC/MS) and Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR–ATR). Four brands of artists’ alkyd paints containing alkyd resin have been analysed; one containing a phthalic anhydride and pentaerythritol based alkyd resin, two containing isophthalic acid and pentaerythritol based alkyd resins, and the final one containing both phthalic anhydride and isophthalic acid and pentaerythritol based resins among the colours studied.  相似文献   

17.
The study of the interaction between silica glass and saturated Ca(OH)2 solutions can be a useful approach to resolve the problem of the adhesion between lime-sand mortar and clay bricks. Since it is reasonable that the silica–calcium hydroxide system well simulates a brick–mortar system, experimental observations concerning the interaction of silica glass and this strong basic solution should be of value for the comprehension of the chemical reactions that could take place at the mortar–brick interface, maybe affecting the adhesion between the two building materials. We demonstrated the effects of saturated Ca(OH)2 solutions on commercial pure silica glass (fused silica) and on silica films obtained via a sol–gel process by means of dip-coating. Silica samples were dipped in the solutions at different temperatures (room temperature, 60 and 80 °C) and at different time intervals (1 and 21 h) and then they were analysed by means of surface techniques: X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS) and atomic force microscopy (AFM). It has been shown that Ca(OH)2 reacts with the silica glass network. The experimental results clearly show a very different behaviour of sol–gel silica with respect to fused silica, probably because of their different nanostructure. Many problems concerning the interaction of silica and Ca(OH)2 are still to be solved, but the results of this research strengthen the idea that adhesion between lime-sand mortar and clay bricks is caused not only by carbonation of calcium hydroxide contained in the mortar, but even by some chemical reactions involving the brick constituents and calcium hydroxide itself. The final products, calcium silicates, may induce a chemical continuity between lime-sand mortar and clay bricks.  相似文献   

18.
The application of total reflection X-ray fluorescence (TXRF) to the analysis of inorganic pigments used in five Albanian icons painted by Onufri Qiprioti, in the period from the end of 16th to the beginning of 17th century is presented. After removing the protective varnish with a solvent, a dry cotton-wool bud (Q-tip) was rubbed over the painted surface to collect the micro-samples. Samples, covering the main colors and their hues, were collected of each icon. A part of the small amount of the sample was transferred to a glass carrier and analyzed by TXRF. Main types of inorganic pigments used for different colors could be identified. The results indicate a palette which included white lead, calcium white, gold, orpiment, yellow and red ochre, vermilion, red lead; a cooper based green pigment (malachite or verdigris) and smalt.  相似文献   

19.
The paper deals with financing the culture in Italy. The public expenses for the culture are shared as expenses of the government, of the regions, of the provinces and of the municipalities. The relationships of the cultural organisations with the public sector are very strong because they belong to the public sector, or they broadly depend on public funds.A specific attention is devoted to other forms of financing, about the role of the entrance fees and the entrances of the game “Lotto”, which subsidy the cultural goods and the Interministerial Committee for the Economic Planning (CIPE) allocations to the depressed areas. We will also be faced up to the examination of other sources of private financing as the sponsorships, the entrances of collateral services about museum visits (coffee and bookstore) and the supply of banking foundations. The fiscal incentives refer directly to the cultural institution or to the external financing of the nonprofit institutions by donations or sponsorships. Finally, the cultural institutions will have always to operate more and more by a strategic vision of financial and managerial field, on the basis of high qualitative standards. The activities and cultural projects will have to be able to attract additional sources of income in addition to the public one; the search of private financial resources is developed in a situation of increasing competition among the institutions, while tools of innovative finance have to be used to satisfy the increasing demand of culture. It is difficult nevertheless to define the possible best method of public–private financing, if you take consideration of the distinctive features of the different institutions and interests of the operators who are involved: artists, cultural institutions, public bureaucracy, besides the economic effects which follow alternative choices. The recent evolution of the institutional, financial and managerial models of the culture in Italy plans a larger integration between public and private sectors for a great involvement of individuals, enterprises and foundations about the financing of the cultural services offer.  相似文献   

20.
Brazilwood was used in this work to dye wool mordanted with different amounts of copper(II) sulfate, alum and iron(II) sulfate. Two different dyeing methods were used: premordanting (MD) and simultaneous mordanting (M+D) procedures. In order to evaluate the influence of the mordant ion in the brazilein chromophore photodegradation, samples were subjected to artificial light ageing. Color measurements were made and, for the first time, LC-DAD-ESI-MS was used for chromophore analysis of the dyed fibers before and after light exposure. Mordant ion quantification was done after fiber acid digestion, by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and flame atomic absorption spectroscopy (FAAS). Mordant metal ion, mordant bath concentration and dyeing procedure were found to have strong influence in the wool fiber hues. Color variation was more pronounced in the alum dyed samples. Overall, mordant quantification showed that the amount of metal ions found in the fibers is very small when compared to the original concentrations of the dyeing bath, being Cu the ion with greater affinity for the wool fibers. MD dyeing procedure yielded fibers with larger amounts of mordant metal ions and higher chromophore peak areas. Higher amounts of brazilein were extracted from wool mordanted with copper(II) sulfate. Finally, chromatographic analysis of the brazilwood dyed samples before and after light exposure resulted in the detection of Type C compound as an outcome of the photodegradation process.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号