首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
A well-known ad-hoc approach to conducting structural equation modeling with missing data is to obtain a saturated maximum likelihood (ML) estimate of the population covariance matrix and then to use this estimate in the complete data ML fitting function to obtain parameter estimates. This 2-stage (TS) approach is appealing because it minimizes a familiar function while being only marginally less efficient than the full information ML (FIML) approach. Additional advantages of the TS approach include that it allows for easy incorporation of auxiliary variables and that it is more stable in smaller samples. The main disadvantage is that the standard errors and test statistics provided by the complete data routine will not be correct. Empirical approaches to finding the right corrections for the TS approach have failed to provide unequivocal solutions. In this article, correct standard errors and test statistics for the TS approach with missing completely at random and missing at random normally distributed data are developed and studied. The new TS approach performs well in all conditions, is only marginally less efficient than the FIML approach (and is sometimes more efficient), and has good coverage. Additionally, the residual-based TS statistic outperforms the FIML test statistic in smaller samples. The TS method is thus a viable alternative to FIML, especially in small samples, and its further study is encouraged.  相似文献   

2.
Recently a new mean scaled and skewness adjusted test statistic was developed for evaluating structural equation models in small samples and with potentially nonnormal data, but this statistic has received only limited evaluation. The performance of this statistic is compared to normal theory maximum likelihood and 2 well-known robust test statistics. A modification to the Satorra–Bentler scaled statistic is developed for the condition that sample size is smaller than degrees of freedom. The behavior of the 4 test statistics is evaluated with a Monte Carlo confirmatory factor analysis study that varies 7 sample sizes and 3 distributional conditions obtained using Headrick's fifth-order transformation to nonnormality. The new statistic performs badly in most conditions except under the normal distribution. The goodness-of-fit χ2 test based on maximum-likelihood estimation performed well under normal distributions as well as under a condition of asymptotic robustness. The Satorra–Bentler scaled test statistic performed best overall, whereas the mean scaled and variance adjusted test statistic outperformed the others at small and moderate sample sizes under certain distributional conditions.  相似文献   

3.
When the multivariate normality assumption is violated in structural equation modeling, a leading remedy involves estimation via normal theory maximum likelihood with robust corrections to standard errors. We propose that this approach might not be best for forming confidence intervals for quantities with sampling distributions that are slow to approach normality, or for functions of model parameters. We implement and study a robust analog to likelihood-based confidence intervals based on inverting the robust chi-square difference test of Satorra (2000). We compare robust standard errors and the robust likelihood-based approach versus resampling methods in confirmatory factor analysis (Studies 1 & 2) and mediation analysis models (Study 3) for both single parameters and functions of model parameters, and under a variety of nonnormal data generation conditions. The percentile bootstrap emerged as the method with the best calibrated coverage rates and should be preferred if resampling is possible, followed by the robust likelihood-based approach.  相似文献   

4.
This article proposes 2 classes of ridge generalized least squares (GLS) procedures for structural equation modeling (SEM) with unknown population distributions. The weight matrix for the first class of ridge GLS is obtained by combining the sample fourth-order moment matrix with the identity matrix. The weight matrix for the second class is obtained by combining the sample fourth-order moment matrix with its diagonal matrix. Empirical results indicate that, with data from an unknown population distribution, parameter estimates by ridge GLS can be much more accurate than those by either GLS or normal-distribution-based maximum likelihood; and standard errors of the parameter estimates also become more accurate in predicting the empirical ones. Rescaled and adjusted statistics are proposed for overall model evaluation, and they also perform much better than the default statistic following from the GLS method. The use of the ridge GLS procedures is illustrated with a real data set.  相似文献   

5.
A 2-stage procedure for estimation and testing of observed measure correlations in the presence of missing data is discussed. The approach uses maximum likelihood for estimation and the false discovery rate concept for correlation testing. The method can be used in initial exploration-oriented empirical studies with missing data, where it is of interest to estimate manifest variable interrelationship indexes and test hypotheses about their population values. The procedure is applicable also with violations of the underlying missing at random assumption, via inclusion of auxiliary variables. The outlined approach is illustrated with data from an aging research study.  相似文献   

6.
Classical accounts of maximum likelihood (ML) estimation of structural equation models for continuous outcomes involve normality assumptions: standard errors (SEs) are obtained using the expected information matrix and the goodness of fit of the model is tested using the likelihood ratio (LR) statistic. Satorra and Bentler (1994) introduced SEs and mean adjustments or mean and variance adjustments to the LR statistic (involving also the expected information matrix) that are robust to nonnormality. However, in recent years, SEs obtained using the observed information matrix and alternative test statistics have become available. We investigate what choice of SE and test statistic yields better results using an extensive simulation study. We found that robust SEs computed using the expected information matrix coupled with a mean- and variance-adjusted LR test statistic (i.e., MLMV) is the optimal choice, even with normally distributed data, as it yielded the best combination of accurate SEs and Type I errors.  相似文献   

7.
Though the common default maximum likelihood estimator used in structural equation modeling is predicated on the assumption of multivariate normality, applied researchers often find themselves with data clearly violating this assumption and without sufficient sample size to utilize distribution-free estimation methods. Fortunately, promising alternatives are being integrated into popular software packages. Bootstrap resampling, which is offered in AMOS (Arbuckle, 1997), is one potential solution for estimating model test statistic p values and parameter standard errors under nonnormal data conditions. This study is an evaluation of the bootstrap method under varied conditions of nonnormality, sample size, model specification, and number of bootstrap samples drawn from the resampling space. Accuracy of the test statistic p values is evaluated in terms of model rejection rates, whereas accuracy of bootstrap standard error estimates takes the form of bias and variability of the standard error estimates themselves.  相似文献   

8.
文章主要讨论了两个0-1总体均具有部分缺失数据时的参数的极大似然估计,并证明了估计的强相合性和渐进正态性,给出了大样本场合下的似然比检验统计量的极限分布。  相似文献   

9.
As noted by Fremer and Olson, analysis of answer changes is often used to investigate testing irregularities because the analysis is readily performed and has proven its value in practice. Researchers such as Belov, Sinharay and Johnson, van der Linden and Jeon, van der Linden and Lewis, and Wollack, Cohen, and Eckerly have suggested several statistics for detection of aberrant answer changes. This article suggests a new statistic that is based on the likelihood ratio test. An advantage of the new statistic is that it follows the standard normal distribution under the null hypothesis of no aberrant answer changes. It is demonstrated in a detailed simulation study that the Type I error rate of the new statistic is very close to the nominal level and the power of the new statistic is satisfactory in comparison to those of several existing statistics for detecting aberrant answer changes. The new statistic and several existing statistics were shown to provide useful information for a real data set. Given the increasing interest in analysis of answer changes, the new statistic promises to be useful to measurement practitioners.  相似文献   

10.
This study examined the effect of model size on the chi-square test statistics obtained from ordinal factor analysis models. The performance of six robust chi-square test statistics were compared across various conditions, including number of observed variables (p), number of factors, sample size, model (mis)specification, number of categories, and threshold distribution. Results showed that the unweighted least squares (ULS) robust chi-square statistics generally outperform the diagonally weighted least squares (DWLS) robust chi-square statistics. The ULSM estimator performed the best overall. However, when fitting ordinal factor analysis models with a large number of observed variables and small sample size, the ULSM-based chi-square tests may yield empirical variances that are noticeably larger than the theoretical values and inflated Type I error rates. On the other hand, when the number of observed variables is very large, the mean- and variance-corrected chi-square test statistics (e.g., based on ULSMV and WLSMV) could produce empirical variances conspicuously smaller than the theoretical values and Type I error rates lower than the nominal level, and demonstrate lower power rates to reject misspecified models. Recommendations for applied researchers and future empirical studies involving large models are provided.  相似文献   

11.
The purpose of this study is to investigate the effects of missing data techniques in longitudinal studies under diverse conditions. A Monte Carlo simulation examined the performance of 3 missing data methods in latent growth modeling: listwise deletion (LD), maximum likelihood estimation using the expectation and maximization algorithm with a nonnormality correction (robust ML), and the pairwise asymptotically distribution-free method (pairwise ADF). The effects of 3 independent variables (sample size, missing data mechanism, and distribution shape) were investigated on convergence rate, parameter and standard error estimation, and model fit. The results favored robust ML over LD and pairwise ADF in almost all respects. The exceptions included convergence rates under the most severe nonnormality in the missing not at random (MNAR) condition and recovery of standard error estimates across sample sizes. The results also indicate that nonnormality, small sample size, MNAR, and multicollinearity might adversely affect convergence rate and the validity of statistical inferences concerning parameter estimates and model fit statistics.  相似文献   

12.
The asymptotically distribution-free (ADF) test statistic depends on very mild distributional assumptions and is theoretically superior to many other so-called robust tests available in structural equation modeling. The ADF test, however, often leads to model overrejection even at modest sample sizes. To overcome its poor small-sample performance, a family of robust test statistics obtained by modifying the ADF statistics was recently proposed. This study investigates by simulation the performance of the new modified test statistics. The results revealed that although a few of the test statistics adequately controlled Type I error rates in each of the examined conditions, most performed quite poorly. This result underscores the importance of choosing a modified test statistic that performs well for specific examined conditions. A parametric bootstrap method is proposed for identifying such a best-performing modified test statistic. Through further simulation it is shown that the proposed bootstrap approach performs well.  相似文献   

13.
In the exploratory factor analysis, when the number of factors exceeds the true number of factors, the likelihood ratio test statistic no longer follows the chi-square distribution due to a problem of rank deficiency and nonidentifiability of model parameters. As a result, decisions regarding the number of factors may be incorrect. Several researchers have pointed out this phenomenon, but it is not well known among applied researchers who use exploratory factor analysis. We demonstrate that overfactoring is one cause for the well-known fact that the likelihood ratio test tends to find too many factors.  相似文献   

14.
In a first course in mathematical statistics or categorical data analysis, the maximum likelihood estimators of the parameters of the multinomial distribution are often “derived” using calculus. However, the important step of verifying that the resulting estimators indeed maximize the likelihood is omitted or done incorrectly. In this paper, two simple methods of obtaining the maximum likelihood estimates are presented.  相似文献   

15.
Fitting a large structural equation modeling (SEM) model with moderate to small sample sizes results in an inflated Type I error rate for the likelihood ratio test statistic under the chi-square reference distribution, known as the model size effect. In this article, we show that the number of observed variables (p) and the number of free parameters (q) have unique effects on the Type I error rate of the likelihood ratio test statistic. In addition, the effects of p and q cannot be fully explained using degrees of freedom (df). We also evaluated the performance of 4 correctional methods for the model size effect, including Bartlett’s (1950), Swain’s (1975), and Yuan’s (2005) corrected statistics, and Yuan, Tian, and Yanagihara’s (2015) empirically corrected statistic. We found that Yuan et al.’s (2015) empirically corrected statistic generally yields the best performance in controlling the Type I error rate when fitting large SEM models.  相似文献   

16.
The Bollen-Stine bootstrap can be used to correct for standard error and fit statistic bias that occurs in structural equation modeling (SEM) applications due to nonnormal data. The purpose of this article is to demonstrate the use of a custom SAS macro program that can be used to implement the Bollen-Stine bootstrap with existing SEM software. Although this article focuses on missing data, the macro can be used with complete data sets as well. A series of heuristic analyses are presented, along with detailed programming instructions for each of the commercial SEM software packages.  相似文献   

17.
Smoothing is designed to yield smoother equating results that can reduce random equating error without introducing very much systematic error. The main objective of this study is to propose a new statistic and to compare its performance to the performance of the Akaike information criterion and likelihood ratio chi-square difference statistics in selecting the smoothing parameter for polynomial loglinear equating under the random groups design. These model selection statistics were compared for four sample sizes (500, 1,000, 2,000, and 3,000) and eight simulated equating conditions, including both conditions where equating is not needed and conditions where equating is needed. The results suggest that all model selection statistics tend to improve the equating accuracy by reducing the total equating error. The new statistic tended to have less overall error than the other two methods.  相似文献   

18.
This article applies Bollen’s (1996) 2-stage least squares/instrumental variables (2SLS/IV) approach for estimating the parameters in an unconditional and a conditional second-order latent growth model (LGM). First, the 2SLS/IV approach for the estimation of the means and the path coefficients in a second-order LGM is derived. An empirical example is then used to show that 2SLS/IV yields estimates that are similar to maximum likelihood (ML) in the estimation of a conditional second-order LGM. Three subsequent simulation studies are then presented to show that the new approach is as accurate as ML and that it is more robust against misspecifications of the growth trajectory than ML. Together, these results suggest that 2SLS/IV should be considered as an alternative to the commonly applied ML estimator.  相似文献   

19.
Mean and mean-and-variance corrections are the 2 major principles to develop test statistics with violation of conditions. In structural equation modeling (SEM), mean-rescaled and mean-and-variance-adjusted test statistics have been recommended under different contexts. However, recent studies indicated that their Type I error rates vary from 0% to 100% as the number of variables p increases. Can we still trust the 2 principles and what alternative rules can be used to develop test statistics for SEM with “big data”? This article addresses the issues by a large-scale Monte Carlo study. Results indicate that empirical means and standard deviations of each statistic can differ from their expected values many times in standardized units when p is large. Thus, the problems in Type I error control with the 2 statistics are because they do not possess the properties to which they are entitled, not because of the wrongdoing of the mean and mean-and-variance corrections. However, the 2 principles need to be implemented using small sample methodology instead of asymptotics. Results also indicate that distributions other than chi-square might better describe the behavior of test statistics in SEM with big data.  相似文献   

20.
假设检验问题的关键是在一定的统计思想之下构造相关的统计量。极大似然思想是统计和实际应用中的一种重要思想。基于极大似然原理,构造似然比统计量,讨论正态总体的检验问题,其结果与传统的U检验、T检验、χ2检验一致。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号