共查询到20条相似文献，搜索用时 500 毫秒
1.
This article proposes 2 classes of ridge generalized least squares (GLS) procedures for structural equation modeling (SEM) with unknown population distributions. The weight matrix for the first class of ridge GLS is obtained by combining the sample fourth-order moment matrix with the identity matrix. The weight matrix for the second class is obtained by combining the sample fourth-order moment matrix with its diagonal matrix. Empirical results indicate that, with data from an unknown population distribution, parameter estimates by ridge GLS can be much more accurate than those by either GLS or normal-distribution-based maximum likelihood; and standard errors of the parameter estimates also become more accurate in predicting the empirical ones. Rescaled and adjusted statistics are proposed for overall model evaluation, and they also perform much better than the default statistic following from the GLS method. The use of the ridge GLS procedures is illustrated with a real data set. 相似文献
2.
In the application of the Satorra–Bentler scaling correction, the choices of normal-theory weight matrices (i.e., the model-predicted vs. the sample covariance matrix) in the calculation of the correction remains unclear. Different software programs use different matrices by default. This simulation study investigates the discrepancies due to the weight matrices in the robust chi-square statistics, standard errors, and chi-square-based model fit indexes. This study varies the sample sizes at 100, 200, 500, and 1,000; kurtoses at 0, 7, and 21; and degrees of model misspecification, measured by the population root mean square error of approximation (RMSEA), at 0, .03, .05, .08, .10, and .15. The results favor the use of the model-predicted covariance matrix because it results in less false rejection rates under the correctly specified model, as well as more accurate standard errors across all conditions. For the sample-corrected robust RMSEA, comparative fit index (CFI) and Tucker–Lewis index (TLI), 2 matrices result in negligible differences. 相似文献
3.
《Structural equation modeling》2013,20(4):557-595
This simulation study demonstrates how the choice of estimation method affects indexes of fit and parameter bias for different sample sizes when nested models vary in terms of specification error and the data demonstrate different levels of kurtosis. Using a fully crossed design, data were generated for 11 conditions of peakedness, 3 conditions of misspecification, and 5 different sample sizes. Three estimation methods (maximum likelihood [ML], generalized least squares [GLS], and weighted least squares [WLS]) were compared in terms of overall fit and the discrepancy between estimated parameter values and the true parameter values used to generate the data. Consistent with earlier findings, the results show that ML compared to GLS under conditions of misspecification provides more realistic indexes of overall fit and less biased parameter values for paths that overlap with the true model. However, despite recommendations found in the literature that WLS should be used when data are not normally distributed, we find that WLS under no conditions was preferable to the 2 other estimation procedures in terms of parameter bias and fit. In fact, only for large sample sizes (N = 1,000 and 2,000) and mildly misspecified models did WLS provide estimates and fit indexes close to the ones obtained for ML and GLS. For wrongly specified models WLS tended to give unreliable estimates and over-optimistic values of fit. 相似文献
4.
A well-known ad-hoc approach to conducting structural equation modeling with missing data is to obtain a saturated maximum likelihood (ML) estimate of the population covariance matrix and then to use this estimate in the complete data ML fitting function to obtain parameter estimates. This 2-stage (TS) approach is appealing because it minimizes a familiar function while being only marginally less efficient than the full information ML (FIML) approach. Additional advantages of the TS approach include that it allows for easy incorporation of auxiliary variables and that it is more stable in smaller samples. The main disadvantage is that the standard errors and test statistics provided by the complete data routine will not be correct. Empirical approaches to finding the right corrections for the TS approach have failed to provide unequivocal solutions. In this article, correct standard errors and test statistics for the TS approach with missing completely at random and missing at random normally distributed data are developed and studied. The new TS approach performs well in all conditions, is only marginally less efficient than the FIML approach (and is sometimes more efficient), and has good coverage. Additionally, the residual-based TS statistic outperforms the FIML test statistic in smaller samples. The TS method is thus a viable alternative to FIML, especially in small samples, and its further study is encouraged. 相似文献
5.
The latent state–trait (LST) theory is an extension of the classical test theory that allows one to decompose a test score into a true trait, a true state residual, and an error component. For practical applications, the variances of these latent variables may be estimated with standard methods of structural equation modeling (SEM). These estimates allow one to decompose the coefficient of reliability into a coefficient of consistency (indicating true effects of the person) plus a coefficient of occasion specificity (indicating true effects of the situation and the person–situation interaction). One disadvantage of this approach is that the standard SEM analysis requires large sample sizes. This article aims to overcome this disadvantage by presenting a simple method that allows one to estimate the LST parameters algebraically from the observed covariance matrix. A Monte Carlo simulation suggests that the proposed method may be superior to the standard SEM analysis in small samples. 相似文献
6.
Research in covariance structure analysis suggests that nonnormal data will invalidate chi‐square tests and produce erroneous standard errors. However, much remains unknown about the extent to and the conditions under which highly skewed and kurtotic data can affect the parameter estimates, standard errors, and fit indices. Using actual kurtotic and skewed data and varying sample sizes and estimation methods, we found that (a) normal theory maximum likelihood (ML) and generalized least squares estimators were fairly consistent and almost identical, (b) standard errors tended to underestimate the true variation of the estimators, but the problem was not very serious for large samples (n = 1,000) and conservative (99%) confidence intervals, and (c) the adjusted chi‐square tests seemed to yield acceptable results with appropriate sample sizes. 相似文献
7.
The purpose of this study is to investigate the effects of missing data techniques in longitudinal studies under diverse conditions. A Monte Carlo simulation examined the performance of 3 missing data methods in latent growth modeling: listwise deletion (LD), maximum likelihood estimation using the expectation and maximization algorithm with a nonnormality correction (robust ML), and the pairwise asymptotically distribution-free method (pairwise ADF). The effects of 3 independent variables (sample size, missing data mechanism, and distribution shape) were investigated on convergence rate, parameter and standard error estimation, and model fit. The results favored robust ML over LD and pairwise ADF in almost all respects. The exceptions included convergence rates under the most severe nonnormality in the missing not at random (MNAR) condition and recovery of standard error estimates across sample sizes. The results also indicate that nonnormality, small sample size, MNAR, and multicollinearity might adversely affect convergence rate and the validity of statistical inferences concerning parameter estimates and model fit statistics. 相似文献
8.
Ridge generalized least squares (RGLS) is a recently proposed estimation procedure for structural equation modeling. In the formulation of RGLS, there is a key element, ridge tuning parameter, whose value determines the efficiency of parameter estimates. This article aims to optimize RGLS by developing formulas for the ridge tuning parameter to yield the most efficient parameter estimates in practice. For the formulas to have a wide scope of applicability, they are calibrated using empirical efficiency and via many conditions on population distribution, sample size, number of variables, and model structure. Results show that RGLS with the tuning parameter determined by the formulas can substantially improve the efficiency of parameter estimates over commonly used procedures with real data being typically nonnormally distributed. 相似文献
9.
A great obstacle for wider use of structural equation modeling (SEM) has been the difficulty in handling categorical variables. Two data sets with known structure between 2 related binary outcomes and 4 independent binary variables were generated. Four SEM strategies and resulting apparent validity were tested: robust maximum likelihood (ML), tetrachoric correlation matrix input followed by SEM ML analysis, SEM ML estimation for the sum of squares and cross-products (SSCP) matrix input obtained by the log-linear model that treated all variables as dependent, and asymptotic distribution-free (ADF) SEM estimation. SEM based on the SSCP matrix obtained by the log-linear model and SEM using robust ML estimation correctly identified the structural relation between the variables. SEM using ADF added an extra parameter. SEM based on tetrachoric correlation input did not specify the data generating process correctly. Apparent validity was similar for all models presented. Data transformation used in log-linear modeling can serve as an input for SEM. 相似文献
10.
The asymptotically distribution free (ADF) method is often used to estimate parameters or test models without a normal distribution assumption on variables, both in covariance structure analysis and in correlation structure analysis. However, little has been done to study the differences in behaviors of the ADF method in covariance versus correlation structure analysis. The behaviors of 3 test statistics frequently used to evaluate structural equation models with nonnormally distributed variables, χ2 test TAGLS and its small-sample variants TYB and TF(AGLS) were compared. Results showed that the ADF method in correlation structure analysis with test statistic TAGLS performs much better at small sample sizes than the corresponding test for covariance structures. In contrast, test statistics TYB and TF(AGLS) under the same conditions generally perform better with covariance structures than with correlation structures. It is proposed that excessively large and variable condition numbers of weight matrices are a cause of poor behavior of ADF test statistics in small samples, and results showed that these condition numbers are systematically increased with substantial increase in variance as sample size decreases. Implications for research and practice are discussed. 相似文献
11.
Herbert W. Marsh 《Structural equation modeling》2013,20(1):22-36
The use of sample covariance matrices constructed with pairwise deletion for data missing completely at random (SPW) is addressed in a simulation study based on 3 sample sizes (n = 200, 500, 1,000) and 5 levels of missing data (%miss = 0, 1, 10, 25, and 50). Parameter estimates were unbiased, parameter variability was largely explicable in terms of the number of nonmissing cases, and no sample covariance matrices were nonpositive definite except when %miss was 50 and the sample size was 200. However, nominal χ2 test statistics (and, thus, fit indices based on χ2s) were substantially biased by %miss and its interaction with N. Corrected χ2s based on the minimum, mean, and maximum number of nonmissing cases per measured variables and cases per covariance term (NPC) reduced but did not eliminate the bias. Empirically derived power functions did substantially better but may not generalize to other situations. Whereas the minimum NPC (the default in the SPSS version of LISREL) is probably better than most simple alternatives in many applications, the problem of how to assess fit for models fit to SPWS has no simple solution; caution is recommended, and there is need for further research with more suitable methods for this problem. 相似文献
12.
Lifang Deng 《Structural equation modeling》2013,20(4):552-567
Multigroup structural equation modeling (SEM) plays a key role in studying measurement invariance and in group comparison. However, existing methods for multigroup SEM assume that different samples are independent. This article develops a method for multigroup SEM with correlated samples. Parallel to that for independent samples, the focus here is on the cross-group stability of the within-group structure and parameters. In particular, the method does not require the specification of any between-group relationship. Rescaled and adjusted statistics as well as sandwich-type covariance matrices make the developed method work for possibly nonnormal variables with finite 4th-order moments. The method is applied to a longitudinal data set on the development of entrepreneurial teams across 4 phases. Detailed analysis is provided regarding the stability of the effect of psychological compatibility on team performance, as it is mediated by fairness perception and team cohesion. 相似文献
13.
Previous research indicates that relative fit indices in structural equation modeling may vary across estimation methods. Sugawara and MacCallum (1993) explained that the discrepancy arises from difference in the function values for the null model with no further derivation given. In this study, we derive explicit solutions for parameters of the null model. The null model specifies the variances of the observed variables as model parameters and fixes all the covariances to be zero. Three methods of estimation are considered: the maximum likelihood (ML) method, the ordinary least squares (OLS) method, and the generalized least squares (GLS) method. Results indicate that ML and LS yield an identical estimator, which is different from GLS. Function values and associated chi‐square statistics of the null model vary across estimation methods. Consequently, relative fit indices using the null model as the reference point in computation may yield different results depending on the estimation method chosen. An illustration example is given and implications of this study are discussed. 相似文献
14.
Effects of sample size,estimation methods,and model specification on structural equation modeling fit indexes 总被引：2，自引：0，他引：2
A Monte Carlo simulation study was conducted to investigate the effects on structural equation modeling (SEM) fit indexes of sample size, estimation method, and model specification. Based on a balanced experimental design, samples were generated from a prespecified population covariance matrix and fitted to structural equation models with different degrees of model misspecification. Ten SEM fit indexes were studied. Two primary conclusions were suggested: (a) some fit indexes appear to be noncomparable in terms of the information they provide about model fit for misspecified models and (b) estimation method strongly influenced almost all the fit indexes examined, especially for misspecified models. These 2 issues do not seem to have drawn enough attention from SEM practitioners. Future research should study not only different models vis‐à‐vis model complexity, but a wider range of model specification conditions, including correctly specified models and models specified incorrectly to varying degrees. 相似文献
15.
Smoothing is designed to yield smoother equating results that can reduce random equating error without introducing very much systematic error. The main objective of this study is to propose a new statistic and to compare its performance to the performance of the Akaike information criterion and likelihood ratio chi-square difference statistics in selecting the smoothing parameter for polynomial loglinear equating under the random groups design. These model selection statistics were compared for four sample sizes (500, 1,000, 2,000, and 3,000) and eight simulated equating conditions, including both conditions where equating is not needed and conditions where equating is needed. The results suggest that all model selection statistics tend to improve the equating accuracy by reducing the total equating error. The new statistic tended to have less overall error than the other two methods. 相似文献
16.
《Structural equation modeling》2013,20(2):153-185
Meta-analytic structural equation modeling (MA-SEM) is increasingly being used to assess model-fit for variables' interrelations synthesized across studies. MA-SEM researchers have analyzed synthesized correlation matrices using structural equation modeling (SEM) estimation that is designed for covariance matrices. This can produce incorrect model-fit chi-square statistics, standard error estimates (Cudeck, 1989), or both for parameters that are not scale free or that describe a scale-noninvariant model unless corrected SEM estimation is used to analyze the correlations. This study introduced univariate and multivariate approximate methods for synthesizing covariance matrices for use in MA-SEM. A simulation study assessed the approximate methods by estimating parameters in a scale-noninvariant model using synthesized covariances versus synthesized correlations with and without the appropriate corrections. Standard error bias was noted only for uncorrected analyses of pooled correlations. Chi-square model-fit statistics were overly conservative except when covariance matrices were analyzed. Benefits and limitations of this approximate method are presented and discussed. 相似文献
17.
In the presence of omitted variables or similar validity threats, regression estimates are biased. Unbiased estimates (the causal effects) can be obtained in large samples by fitting instead the Instrumental Variables Regression (IVR) model. The IVR model can be estimated using structural equation modeling (SEM) software or using Econometric estimators such as two-stage least squares (2SLS). We describe 2SLS using SEM terminology, and report a simulation study in which we generated data according to a regression model in the presence of omitted variables and fitted (a) a regression model using ordinary least squares, (b) an IVR model using maximum likelihood (ML) as implemented in SEM software, and (c) an IVR model using 2SLS. Coverage rates of the causal effect using regression methods are always unacceptably low (often 0). When using the IVR model, accurate coverage is obtained across all conditions when N = 500. Even when the IVR model is misspecified, better coverage than regression is generally obtained. Differences between 2SLS and ML are small and favor 2SLS in small samples (N ≤ 100). 相似文献
18.
《Structural equation modeling》2013,20(3):390-412
The sample invariance of item discrimination statistics is evaluated in this case study using real data. The hypothesized superiority of the item response model (IRM) is tested against structural equation modeling (SEM) for responses to the Center for Epidemiologic Studies-Depression (CES-D) scale. Responses from 10 random samples of 500 people were drawn from a base sample of 6,621 participants across gender, age, and different health groups. Hierarchical tests of multiple-group structural equation models indicated statistically significant differences exist in item regressions across contrast groups. Although the IRM item discrimination estimates were most stable in all conditions of this case study, additional research on the precision of individual scores and possible item bias is required to support the validity of either model for scoring the CES-D. The SEM approach to examining between-group differences holds promise for any field where heterogeneous populations are assessed and important consequences arise from score interpretations. 相似文献
19.
Recently a new mean scaled and skewness adjusted test statistic was developed for evaluating structural equation models in small samples and with potentially nonnormal data, but this statistic has received only limited evaluation. The performance of this statistic is compared to normal theory maximum likelihood and 2 well-known robust test statistics. A modification to the Satorra–Bentler scaled statistic is developed for the condition that sample size is smaller than degrees of freedom. The behavior of the 4 test statistics is evaluated with a Monte Carlo confirmatory factor analysis study that varies 7 sample sizes and 3 distributional conditions obtained using Headrick's fifth-order transformation to nonnormality. The new statistic performs badly in most conditions except under the normal distribution. The goodness-of-fit χ2 test based on maximum-likelihood estimation performed well under normal distributions as well as under a condition of asymptotic robustness. The Satorra–Bentler scaled test statistic performed best overall, whereas the mean scaled and variance adjusted test statistic outperformed the others at small and moderate sample sizes under certain distributional conditions. 相似文献
20.
Njål Foldnes George A. Marcoulides Ulf Henning Olsson 《Structural equation modeling》2013,20(5):778-789
The asymptotically distribution-free (ADF) test statistic depends on very mild distributional assumptions and is theoretically superior to many other so-called robust tests available in structural equation modeling. The ADF test, however, often leads to model overrejection even at modest sample sizes. To overcome its poor small-sample performance, a family of robust test statistics obtained by modifying the ADF statistics was recently proposed. This study investigates by simulation the performance of the new modified test statistics. The results revealed that although a few of the test statistics adequately controlled Type I error rates in each of the examined conditions, most performed quite poorly. This result underscores the importance of choosing a modified test statistic that performs well for specific examined conditions. A parametric bootstrap method is proposed for identifying such a best-performing modified test statistic. Through further simulation it is shown that the proposed bootstrap approach performs well. 相似文献