共查询到20条相似文献，搜索用时 687 毫秒
1.
Reinforced concrete （RC） columns lacking adequately detailed transverse reinforcement do not possess the necessary ductility to dissipate seismic energy during a major earthquake without severe strength degradation. In this paper, a new retrofit method, which utilized fiber-reinforced plastics （FRP） confinement mechanism and anchorage of embedded bars, was developed aiming to retrofit non-ductile large RC rectangular columns to prevent the damage of the plastic hinges. Carbon FRP （CFRP） sheets and glass FRP （GFRP） bars were used in this test, and five scaled RC columns were tested to examine the function of this new method for improving the ductility of columns. Responses of columns were examined before and after being retrofitted. Test results indicate that this new composite method can be very effective to improve the anti-seismic behavior of non-ductile RC columns compared with normal CFRP sheets retrofitted column. 相似文献
2.
Retrofitting of RC Slabs Against Explosive Loads 总被引：1，自引：0，他引：1
OEHLERS Deric John 《天津大学学报(英文版)》2006,12(Z1)
With the increase of terrorist bomb attacks on buildings, there is a need to develop advanced retrofitting techniques to strengthen structures against blast loads. Currently, several guidelines including an Australian version for retrofitting reinforced concrete (RC) structures are available for the design of retrofitting systems against seismic and monotonic loads using steel or fibre reinforced polymer (FRP) plates that can be either adhesively bonded to the surface or near surface mounted to the concrete cover. However, none of these guidelines provide advice suitable for retrofitting structures subjected to blast loads. In this paper, numerical models are used to simulate the performance of retrofitted RC slabs subjected to blast loads. Airblast pressure distributions on the surface of the slabs estimated in a previous study are used as input in the analysis. A material damage model developed previously for concrete and an elastoplastic model for steel bars are employed in this research for modelling reinforced concrete behaviour due to explosive loads. The material models and blast loading are coded into a finite element computer program LS-DYNA3D to do the analysis. With the numerical model, parametric studies are conducted to investigate RC slabs retrofitted by either externally bonded or near-surface mounted plates or GFRP sheets subjected to blast loads. Discussion is made on the effectiveness of the retrofitting system for RC slabs against blast loads. 相似文献
3.
FRP加固RC圆柱正截面受弯承载力计算（英文） 总被引：1，自引：0，他引：1
运用数值计算方法对FRP加固钢筋混凝土（RC）圆柱截面特性进行计算,发现截面破坏时受压区高度主要受轴压比、FRP约束强度比和纵筋配筋特征值3个主要参数影响.根据数值计算的结果进行回归,提出了受压区对应圆心角θ的计算方法.数值计算结果显示,横向约束导致的混凝土应力提高以及纵筋屈服后的强化效应使RC柱破坏时截面受弯承载力远大于规范规定值.根据理论分析和36个大比例试件实测结果提出截面破坏时受弯承载力计算方法,计算结果与试验结果吻合很好.最后,对一个典型柱变形能力进行参数分析,研究轴压比,纵筋配筋特征值和FRP约束强度比对正截面变弯承载力的影响.结果显示FRP加固圆柱破坏时受弯承载力可以比规范规定的未加固柱受弯承载力提高50%左右. 相似文献
4.
INTRODUCTION Creep is an internal characteristic of concrete under long-term load. A long time has elapsed since the first discovery of concrete creep in 1907 by Hatt. Many researches have been devoted to this complex problem ever since. However, despite major suc-cesses, the creep phenomenon is still far from being fully understood, even though the phenomenon has occupied some of the best minds in the field, such as Glanville, Dischinger, Troxell, Pickett, Neville, etc. Creep phenome… 相似文献
5.
OpenSees is a well-recognized open source platform with high compatibility, and it has a well-developed fiber ele- ment method to cope with nonlinear structural analysis. Fiber reinforced polymer （FRP） confined concrete can effectively improve the seismic performance of concrete structures. However, sophisticated constitutive models for FRP confined concrete are not available in the current version of OpenSees. In this paper, after reviewing several typical FRP confined concrete constitutive models, a modified constitutive model for FRP confined concrete in circular sections was proposed based on Lain and Teng （2003）＇s model with four main modifications including the determination of FRP rupture strain, ultimate condition, envelope shape, and hysteretic rules. To embed the proposed constitutive model into OpenSees is a practical solution for engineering simulation. Hence, the secondary development of OpenSees New UserMat was briefly demonstrated and a set of critical steps were depicted in a flow chart. Finally, with the numerical implementations of a series of FRP confined concrete members covering a wide range of load cases, FRP confinement types and geometric properties, the utility and accuracy of the proposed model compared with Lam and Teng （2003）＇s model and new material secondary development in OpenSees were well validated. 相似文献
6.
INTRODUCTION There is increased need in recent years for strengthening or rehabilitation of existing reinforced concrete structures adversely affected by overloading, construction material deterioration, seismic loads, structural deformation, etc. An effective method for increasing the shear capacity of reinforced concrete columns is the use of externally bonded carbon fiber reinforced plastic (CFRP) systems (ACI, 2002). FRP systems were first applied to reinforced concrete col-umns i… 相似文献
7.
In Order to reduce economic and life losses due to terrorism or accidental explosion threats,reinforced concrete(RC)slabs of buildings need to be designed or retrofitted to resist blast loading.In this paper the dynamic behavior Of RC slabs under blast loading and its influencing factors are studied.The numerical model of an RC slab subjected to blast loading is established using the explicit dynamic analysis software.Both the strain rate effect and the damage accumulation are taken into account in the material model.The dynamic responses of the RC slab subiected to blast loading are analyzed,and the influence of concrete strength,thickness and reinforcement ratio on the behavior of the RC slab under blast loading iS numerically investigated.Based on the numerical results.some principles for blast-resistant design and retrofitting are proposed to improve the behavior of the RC slab subjected to blast loading. 相似文献
8.
采用Ansys有限元软件对8根不同锈蚀率的FRP片材加固钢筋混凝土梁的受弯性能进行数值分析,研究纵筋锈蚀率对FRP加固梁的裂纹开展、破坏模式、承载能力以及延性和变形能力的影响.研究结果表明:低钢筋锈蚀率的梁发生受压区混凝土压碎破坏;中等锈蚀率的梁钢筋屈服后,钢筋与混凝土界面发生黏结滑移,最后FRP剥离破坏;高锈蚀率的梁钢筋没有达到屈服强度便发生黏结滑移,最后发生受压区混凝土压碎破坏.钢筋锈蚀越严重,FRP加固钢筋混凝土梁的承载力降低得越多.试件RCB-1(锈蚀率为0)的承载力为115 kN,而试件RCB-7(锈蚀率为20%)的承载力仅为42 kN.与FRP加固未锈蚀的钢筋混凝土梁相比,FRP加固锈蚀钢筋混凝土梁的变形能力较高.试件RCB-1和试件RCB-7的最大跨中挠度分别为20 mm和35 mm,而试件RCB-5(锈蚀率为10%)的最大跨中挠度达到了60 mm. 相似文献
9.
为研究FRP(fiber reinforced plastics)加固在役混凝土柱轴压性能的试验方法,采用后张预应力法对混凝土柱施加初始应力,然后采用附加刚性千斤顶加载法进行模拟FRP加固混凝土柱轴压加载试验,得到应力-应变全曲线。研究结果表明,该试验方法能较好地实现FRP加固在役混凝土柱轴心受压试验。 相似文献
10.
11.
We proposed a bilinearity constitutive curve model of fiber reinforced polymer （FRP） confined concrete which includes a parabola in the first stage and a straight line in the second stage. The FRP-confined concrete has powerful confinement status and weak confinement status leading to different equations of parabola. We analyzed the impacts of factors such as confinement ratio and restrain stiffness on confined concrete compressive strength, ultimate strain and other control parameters through finite element analysis. The results show that the confinement ratio determines the confinement status, and the increase of the confinement ratio has a limited capacity to increase the compressive strength, The deformation of confined concrete is influenced by restrain stiffness. The stronger the restrain stiffness is, the less the lateral deformation is and the greater ultimate axial strain will be. The consideration of equivalent section coefficient kse is needed in the non-circular section confined concrete. We analyzed the results and proposed boundary values of strong and weak confinement styles, a peak/inflection point stress and strain model, and a compressive strength and ultimate strain model. 相似文献
12.
建立了T形配钢型钢混凝土偏压构件力学性能分析的有限元模型,计算结果得到以往实验结果的验证。在此基础上,分析了不同阶段材料应力状态和各参数对偏压构件力学性能的影响。结果表明:T形配钢型钢混凝土构件在不同加载角下的性能有所不同,加载角为180°时极限承载力大于其他角度情况;混凝土抗压强度、型钢含钢率、配筋率、荷载偏心率、长细比对构件荷载-变形曲线的影响较大,随着混凝土强度、型钢含钢率、配筋率的增加,极限承载力和刚度增加;随着荷载偏心率的增加,极限承载力和刚度下降;随着构件长细比的增加,构件承载力总体呈现线性下降趋势,刚度下降明显。 相似文献
13.
The marine structures such as harbour,pier and inshore concrete terrace are exposed in adverse circumstances in a long period of time . Owing to the attack of external corrosive medium, their safety, durability and reliability decline. Especially the reinforced concrete(RC) structures in the wave splash area are more likely to be subjected to destruction and the loss is vast. Now the safety ,durability and reliability of structure have become increasingly an important subject to be studied. By way of the soaking and drying cycle test on the different mix proportions oblique section of 10 pieces of RC beams suffered artificial sea water(ASW) corrosion under 0,35,70,105,140 times of dry-wet cycles, the compared results of exerting pressure test of these beams under simply supporting were investigated. The law about the changes of the mechanical performance for RC beams with different mix proportions under different time periods for suffering corrosion of dry-wet cycles is as follows: the resistivity to ASW corrosion of the concrete specimens with various water cement ratio(various initial strength) is different ; the characters of oblique section failure for RC beams attacked by sea water are about the same as those for ordinary RC beam; along with the extension of the time for sea water attack, the bearing capacity for oblique section of RC beams varies wave upon wave. The specimens attacked by sea water for about 35 times of corrosion cycle achieve minimum bearing capacity. 相似文献
14.
宽肢T形混凝土异型柱的有限元分析 总被引：2，自引：0，他引：2
按不同肢厚比设计了3组计算模型,应用ADINA有限元软件分析宽肢T形截面柱在单调荷载作用下的非线性特性,分析了轴压比、水平力作用方向对其承载能力的影响,并通过对柱底部钢筋与混凝土单元的应力、应变随荷载增加而变化的情况的分析,验证了宽肢异形柱对平截面假定的适用性。 相似文献
15.
Evaluation of blast-resistant performance predicted by damaged plasticity model for concrete 总被引：2，自引：0，他引：2
In order to evaluate the capacity of reinforced concrete (RC) structures subjected to blast loadings,the damaged plasticity model for concrete was used in the analysis of the dynamic responses of blast-loaded RC structures,and all three failure modes were numerically simulated by the finite element software ABAQUS.Simulation results agree with the experimental observations.It is demonstrated that the damaged plasticity model for concrete in the finite element software ABAQUS can predict dynamic responses and typical flexure,flexure-shear and direct shear failure modes of the blast-loaded RC structures. 相似文献
16.
陈鹏 《泰州职业技术学院学报》2008,8(3):5-6
《混凝土异形柱结构技术规程（JGJ149—2006）》提出按照最小配箍特征值确定箍筋加密区体积配箍率要求,相应箍筋配置方案需通过计算求得,应用不便。按《规程》要求,根据异形柱的抗震等级、截面形式与尺寸、混凝土强度等级、轴压比的大小,给出了具体的箍筋配置方案,并形成图表,方便设计人员设计、核查。 相似文献
17.
A numerical investigation of thin-walled complex section steel columns with intermediate stiffeners was performed using finite
element analysis. An accurate and reliable finite element model was developed and verified against test results. Verification
indicates that the model could predict the ultimate strengths and failure modes of the tested columns with reasonable accuracy.
Therefore, the developed model was used for the parametric study. In addition, the effect of geometric imperfection on column
ultimate strength and the effect of boundary conditions on the elastic distortional buckling of complex section columns were
investigated. An equation for the elastic distortional buckling load of fixed-ended columns having different column lengths
was proposed. The elastic distortional buckling load obtained from the proposed equation was used in the direct strength method
to calculate the column ultimate strength. Generally, it is shown that the proposed design equation conservatively predicted
the ultimate strengths of complex section columns with different column lengths. 相似文献
18.
有粘结预应力FRP筋混凝土梁受弯有限元模拟 总被引：1，自引：0，他引：1
庄金平 《福建工程学院学报》2011,9(4)
采用有限元软件ABAQUS对预应力FRP筋混凝土梁受弯性能进行模拟。通过降温法施加预应力,忽略预应力筋与混凝土之间的粘结滑移。在收敛度差调整到3%、线性受拉损伤值dt的峰值取为0.9时,模拟结果与他人的试验结果比较基本吻合。 相似文献
19.
碳纤维布与钢构套复合加固锈蚀钢筋混凝土柱抗震性能研究(英文) 总被引：1，自引：0，他引：1
为改善锈蚀钢筋混凝土柱的抗震性能, 利用碳纤维布与角钢对锈蚀柱进行复合抗震加固. 试验共对12根试件进行了低周反复加载试验, 研究参量包括钢筋锈蚀程度、轴向荷载、碳纤维布层数和角钢用量. 试验结果表明, 利用碳纤维布和角钢复合加固锈蚀柱可以显著改善锈蚀柱的承载能力、延性和耗能能力. 复合加固后, 加固柱的强度和延性与锈蚀柱相比, 可分别提高0.9倍和1倍以上. 基于试验结果, 提出了计算加固构件屈服荷载、最大荷载和位移延性系数的简化公式, 计算结果与试验结果极为吻合. 相似文献
20.
INTRODUCTION Reinforced concrete elements with box section are commonly used in horizontal subsystems and in vertical support of bridge structures. The horizontal structural members normally have box section and top flange. The vertical supports of the bridge usually have a box section also. To simplify the deduction of such structural member under combined forces, the box sections without top flange are discussed here. Fig.1 shows the typical section types of reinforced concrete members.… 相似文献