首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper presents an active fault tolerant control (FTC) for doubly fed induction generator (DFIG) with actuator fault and disturbance using Takagi–Sugeno (TS) fuzzy model. The control structure has two parts: fault and disturbance estimation part and FTC part. First, a TS fuzzy model is used to describe the DFIG system. Using a special linear transformation, the original system is decoupled into three independent subsystems: state subsystem without fault and disturbance, disturbance subsystem without fault, and fault subsystem without disturbance. By solving linear matrix inequalities (LMIs), a TS fuzzy observer is designed for the state subsystem without fault and disturbance. Second, estimations of faults and disturbance are obtained using the other subsystem models. Third, an active FTC scheme is developed to reduce the effect of disturbance and actuator faults. Finally, the performance of the proposed FTC is tested for a wind turbine system based on DFIG with actuator faults and disturbance. The simulation results demonstrate that the new FTC scheme makes possible to obtain an efficient fault and disturbance estimation and to reduce the peak current in the transient process.  相似文献   

2.
This paper focuses on the observer-based fault-tolerant control problem for the discrete-time nonlinear systems with the perturbation and the fault signals. First, the nonlinear term with perturbation is put into the local nonlinear part so that the nonlinear system with perturbation can be described as an interval type-1 (IT1) T-S fuzzy system. Then, based on the unknown input observer technology, the IT1 T-S fuzzy fault estimation (FE) observer scheme is presented to obtain the real-time FE information and decouple the local nonlinear part from the estimation error system, where the design complexity and the computational burden are reduced simultaneously. Second, based on the real-time FE information, an FE-based interval type-2 (IT2) T-S fuzzy fault-tolerant control scheme is presented to achieve the compensation for the influence of the fault signal and the stabilization for the system. Different from the traditional methods, a mixed design scheme, which is based on the IT1 T-S fuzzy fault estimation observer method and the IT2 T-S fuzzy fault-tolerant controller method, is proposed in this paper. This strategy can not only reduce the computational burden, but also obtain a less conservative result. Finally, the effectiveness of the mixed design approach is illustrated by an example.  相似文献   

3.
This paper proposes a sensorless fault-tolerant control strategy solving the tracking problem of the maximum delivered power characteristic for a wind energy conversion system equipped with a permanent magnet synchronous generator. A previously published control scheme ensuring the maximum power efficiency of the wind turbine, not requiring feedback information about rotor speed and position, and about wind velocity, is here extended to make the control scheme fault-tolerant with respect to possible electrical faults affecting the equations of the permanent magnet synchronous generator (PMSG) in the original (α, β) frame. The control law is based on a number of interconnected nonlinear observers. Closed loop asymptotic vanishing of the observation errors is proved. The proposed control solution has been validated on the National Renewable Energy Laboratory (NREL) 5-MW three-blade wind turbine model.  相似文献   

4.
As the first part, this paper presents an overview on the existing works on fault detection and diagnosis (FDD) and fault-tolerant control (FTC) for unmanned rotorcraft systems. Considered faults include actuator and sensor faults for single and multi-rotor systems. As the second part, several FDD and FTC techniques developed recently at the Networked Autonomous Vehicles Lab of Concordia University are detailed along with experimental application to a unique and newly developed quadrotor helicopter testbed.  相似文献   

5.
This paper addresses the problem of robust integrated fault estimation (FE) and fault-tolerant control (FTC) for a class of discrete-time networked Takagi–Sugeno (T–S) fuzzy systems with two-channel event-triggered schemes, input quantization and incomplete measurements. The incomplete information under consideration includes randomly occurring sensor saturation and randomly occurring quantization. In order to save the limited networked resources, this paper firstly proposed a novel dynamic event-triggered scheme on the sensor side and a static one on the controller side. Secondly, an event-triggered FE observer for the T–S fuzzy model is designed to estimate actuator faults and system states, simultaneously. Then, a specified discrete sliding surface in the state-estimation space is constructed. By using time-delay analysis technique and considering the effects of event-triggered scheme, quantization, networked conditions, actuator fault and external disturbance, the sliding mode dynamics and error dynamics are unified into a new networked time-delay model. Based on this model, sufficient conditions are established such that the resulting augmented fuzzy system is stochastically stable with a prescribed H∞ performance level with a single-step linear matrix inequality (LMI) formulation. Furthermore, an observer-based sliding mode controller for reaching motion is synthesized to guarantee the reachability of the sliding surface. Finally, a single-link flexible manipulator example is present to illustrate the effectiveness of the proposed method.  相似文献   

6.
This paper addresses the problem of adaptive fault estimation and fault-tolerant control for a class of nonlinear non-Gaussian stochastic systems subject to time-varying loss of control effectiveness faults. In this work, time-varying faults, Lipschitz nonlinear property and general stochastic characteristics are taken into consideration in a unified framework. Instead of using the system output signal, the output distribution is adopted for shape control. Both the states and faults are simultaneously estimated by an adaptive observer. Then, a fault tolerant shape controller is designed to compensate for the faults and realize stochastic output distribution tracking. Both the fault estimation and the fault tolerant control schemes are designed based on linear matrix inequality (LMI) technique. Satisfactory performance has been obtained for a numerical simulation example. Furthermore the proposed scheme is successfully tested in a case study of particle size distribution control for an emulsion polymerization reactor.  相似文献   

7.
The introduction of advanced control algorithms may improve considerably the efficiency of wind turbine systems. This work proposes a high order sliding mode (HOSM) control scheme based on the super twisting algorithm for regulating the wind turbine speed in order to obtain the maximum power from the wind. A robust aerodynamic torque observer, also based on the super twisting algorithm, is included in the control scheme in order to avoid the use of wind speed sensors. The presented robust control scheme ensures good performance under system uncertainties avoiding the chattering problem, which may appear in traditional sliding mode control schemes. The stability analysis of the proposed HOSM observer is provided by means of the Lyapunov stability theory. Experimental results show that the proposed control scheme, based on HOSM controller and observer, provides good performance and that this scheme is robust with respect to system uncertainties and external disturbances.  相似文献   

8.
A fault tolerant control scheme for actuator and sensor faults is proposed for a tilt-rotor unmanned aerial vehicle (UAV) system. The tilt-rotor UAV has a vertically take-off and landing (VTOL) capability like a helicopter during the take-off & landing while it could cruise with a high speed as a conventional airplane flight mode. A dual system in the flight control computer (FCC) and the sensor is proposed in this study. To achieve a high reliability, a fault tolerant flight control system is required for the case of actuator or sensor fault. For the actuator fault, the fault tolerant control scheme based on model error control synthesis is presented. A designed fault tolerant control scheme does not require system identification process and it provides an effective reconfigurability without fault detection and isolation (FDI) process. For the sensor fault, the fault tolerant federated Kalman filter is designed for the tilt-rotor UAV system. An FDI algorithm is applied to the federated Kalman filter in order to improve the accuracy of the state estimation even when the sensor fails. For a linearized six-degree-of-freedom linear model and nonlinear model of the tilt-rotor UAV, numerical simulation and process-in-the-loop simulation (PILS) are performed to demonstrate the performance of the proposed fault tolerant control scheme.  相似文献   

9.
In this paper, a novel tracking control scheme for continuous-time nonlinear affine systems with actuator faults is proposed by using a policy iteration (PI) based adaptive control algorithm. According to the controlled system and desired reference trajectory, a novel augmented tracking system is constructed and the tracking control problem is converted to the stabilizing issue of the corresponding error dynamic system. PI algorithm, generally used in optimal control and intelligence technique fields, is an important reinforcement learning method to solve the performance function by critic neural network (NN) approximation, which satisfies the Lyapunov equation. For the augmented tracking error system with actuator faults, an online PI based fault-tolerant control law is proposed, where a new tuning law of the adaptive parameter is designed to tolerate four common kinds of actuator faults. The stability of the tracking error dynamic with actuator faults is guaranteed by using Lyapunov theory, and the tracking errors satisfy uniformly bounded as the adaptive parameters get converged. Finally, the designed fault-tolerant feedback control algorithm for nonlinear tracking system with actuator faults is applied in two cases to track the desired reference trajectory, and the simulation results demonstrate the effectiveness and applicability of the proposed method.  相似文献   

10.
This paper proposes an adaptive data-driven fault-tolerant control scheme using the Koopman operator for unknown dynamics subjected to nonlinearities, time-varying loss of effectiveness, and additive actuator faults. The main objective of this method is to design a virtual actuator to hide actuator faults from the view of the system’s nominal controller without having any prior knowledge about the system’s underlying dynamics. The designed virtual actuator is placed between the faulty plant and the nominal controller of the system to keep the dynamical system’s performance consistent before and after the occurrence of actuator faults. Based on the Koopman operator theory, an equivalent Koopman predictor is first obtained using the process data only, without knowing the governing equations of the underlying dynamics. Koopman operator is an infinite-dimensional, linear operator which takes the nonlinear process data into an infinite-dimensional feature space where the dynamic data correlations have linear behavior. Next, based on the approximated system’s Koopman operator, a virtual actuator is designed and implemented without knowing the system’s nominal controller. Needless to use a separate fault detection, isolation, and identification module to perform fault-tolerant control, the current method leverages the adaptive framework to keep the system’s desired performance in facing time-varying additive and loss of effectiveness actuator faults. Finally, the approach’s efficacy is demonstrated using simulation on a two-link manipulator benchmark, and a comparison study is presented.  相似文献   

11.
In this paper, an integrated design of data-driven fault-tolerant tracking control is addressed relying on the Markov parameters sequence identification and adaptive dynamic programming techniques. For the unknown model systems, the sequence of Markov parameters together with the covariance of innovation signal is firstly estimated by least square method. After a transformation of value function from stochastic to deterministic, a policy iteration adaptive dynamic programming algorithm is then formulated to find the optimal tracking control law. In order to eliminate the influence of unpredicted faults, an active fault-tolerant supervisory control strategy is further constructed by synthesizing fault detection, isolation, estimation and compensation. All these involved designs are performed in the data-driven manner, and thus avoid the information requirement about system drift dynamics. From the perspective of system operation management, the above integrated control scheme provides a framework to achieve the tracking performance optimization, monitoring and maintaining simultaneously. The effectiveness of these conclusions is finally verified via two case studies.  相似文献   

12.
This paper studied an adaptive actuator fault-tolerant control scheme for the flexible Euler–Bernoulli beam in the three-dimensional space with output constraints and uncertain end load. The dynamic models are represented by partial differential equations (PDEs) and ordinary differential equations (ODEs). When part of the actuator fails, an adaptive control scheme is designed to regulate the vibration and stabilize the flexible three-dimensional Euler–Bernoulli beam. Barrier Lyapunov Function (BLF) is adopted to realize output constraints of the system. Adaptive control law with projection mapping operator is designed to compensate for the end load which is uncertain and bounded. The goal of this paper is to suppress the displacement of the flexible three-dimensional Euler–Bernoulli beam which can be constrained in given bounds under actuator fault and uncertain, bounded end load. It is confirmed that the proposed control scheme can deal with the vibration, adaptive actuator fault-tolerant control, uncertain and bounded end load and output constraints of the system simultaneously. Finally, numerical simulations illustrate the effectiveness and feasibility of the method.  相似文献   

13.
In this paper, a composite fault tolerant control (CFTC) with disturbance observer scheme is considered for a class of stochastic systems with faults and multiple disturbances. The disturbances are divided into two parts. One represents the stochastic disturbance with partial known information which is formulated by an exogenous system. The other is independent Wiener process. A stochastic disturbance observer is designed to estimate exogenous disturbance. To make the first type of disturbance can be rejected and the fault can be diagnosed, a composite fault diagnosis observer with disturbance observer is constructed. Furthermore, a composite fault-tolerant controller is proposed to compensate disturbances and faults. Finally, simulation examples are given to demonstrate the feasibility and effectiveness of the proposed scheme.  相似文献   

14.
This paper investigates the problem of event-triggered fault detection filter design for nonlinear networked control systems with both sensor faults and process faults. First, Takagi–Sugeno (T–S) fuzzy model is utilized to represent the nonlinear systems with faults and disturbances. Second, a discrete event-triggered communication scheme is proposed to reduce the utilization of limited network bandwidth between filter and original system. At the same time, considering network-induced delays and event-triggered scheme, a novel T–S fuzzy fault detection filter is constructed to generate a residual signal, which has nonsynchronous premise variables with the original T–S fuzzy system. Then, the fuzzy Lyapunov functional based approach and the reciprocally convex approach are developed such that the obtained sufficient conditions ensure that the fuzzy fault detection system is asymptotically stable with H∞ performance and is less conservative. All the conditions are given in terms of linear matrix inequalities (LMIs), which can be solved by LMI tools in MATLAB environment. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed results.  相似文献   

15.
In this paper, a learning-based active fault-tolerant control (FTC) scheme for robot manipulators with uncertainties and actuator faults is proposed. Unlike traditional FTC methods, with dynamic learning theory, both uncertainties and actuator faults can be accurately identified/learned by radial basis function networks. Based on the learned knowledge, dynamical classifiers and experience-based controllers corresponding to different fault modes are constructed. With the help of dynamical classifiers, fault detection and isolation can be obtained rapidly and accurately, and the correct experience-based controller (instead of the controller reconfigured online) corresponding to the current fault system is selected to compensate for faults, and superior control performance is achieved, even in the presence of faults. The simulation studies demonstrate the feasibility of the proposed FTC method.  相似文献   

16.
This paper is concerned with integrated event-triggered fault estimation (FE) and sliding mode fault-tolerant control (FTC) for a class of discrete-time Lipschtiz nonlinear networked control systems (NCSs) subject to actuator fault and disturbance. First, an event-triggered fault/state observer is designed to estimate the system state and actuator fault simultaneously. And then, a discrete-time sliding surface is constructed in state-estimation space. By the use of a reformulated Lipschitz property and delay system analysis method, the sliding mode dynamics and state/fault error dynamics are converted into a unified linear parameter varying (LPV) networked system model by taking into account the event-triggered scheme, actuator fault, external disturbance and network-induced delay. Based on this model and with the aid of Lyapunov–Krasovskii functional method, a delay-dependent sufficient condition is derived to guarantee the stability of the resulting closed-loop system with prescribed H∞ performance. Furthermore, an observed-based sliding mode FTC law is synthesized to make sure the reachability of the sliding surface. Finally, simulation results are conducted to verify the effectiveness of the proposed method.  相似文献   

17.
In this paper, we present a fault-tolerant control (FTC) framework for a class of nonlinear networked control systems (NCSs). Firstly, the plant is transformed into two subsystems with one of them decoupled from the system fault. Then, the nonlinear observer is designed to provide the estimation of unmeasurable state and modelling uncertainty, which are used to construct fault estimation algorithm. Considering the sampling intervals occurred by net, a fault-tolerant control method is proposed for such nonlinear NCSs using the impulsive system techniques. The controller gain and the maximum sampling interval, which make the faulty system stable are given. An example is included to show the efficiency of the proposed method.  相似文献   

18.
This paper studies the problem of continuous gain-scheduled PI tracking control on a class of stochastic nonlinear systems subject to partially known jump probabilities and time-varying delays. First, gradient linearization procedure is used to construct model-based linear stochastic systems in the vicinity of selected operating states. Next, based on stochastic Lyapunov stabilization analysis, sufficient conditions for the existence of a PI tracking control are established for each linear model in terms of linear matrix inequalities. Finally, continuous gain-scheduled approach is employed to design continuous nonlinear PI tracking controllers on the entire nonlinear jump system. Simulation example is given to illustrate the effectiveness of the developed design techniques.  相似文献   

19.
It is advantageous to use the substructural and/or decentralized techniques in structural control to save on computations and time. In this paper, a generalized substructural approach is presented in the control of fuzzy nonlinear flexible structures with discrete sensors/actuators. The substructural control scheme is developed using the static condensation technique together with the LQG control method. The subcontrollers and subobservers designed at substructure levels are used to assemble the global controller and observer for the whole structure. Nonlinear effects are included in the structural formulations and a fuzzy methodology is adopted for handling the imprecision present in the structure modeling. The nonlinear and fuzzy schemes are applied to one structural control problem to illustrate the accuracy and capability of the substructural control technique.  相似文献   

20.
This paper investigates a new type of fault detection and diagnosis (FDD) problem for non-Gaussian stochastic distribution systems via the output probability density function (PDF). The PDF can be approximated by using square root B-spline expansions. In this framework, an optimal fault detection algorithm is presented by introducing the tuning parameter such that the residual is as sensitive as possible to the fault. When the fault occurs, an adaptive network parameter-updating law is designed to approximate the fault. At last, paper-making process example is given to demonstrate the efficiency of the proposed approach.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号