首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 562 毫秒
1.
The present investigation is concerned with the effects of thermal-diffusion and diffusion-thermo on an unsteady MHD free convection boundary layer flow with heat and mass transfer of an electrically conducting fluid over a stretching sheet in the presence of strong magnetic field with Hall current, thermal stratification, chemical reaction, heat generation, thermal radiation, Joule heating and viscous dissipation. The transformed nonlinear boundary layer equations are numerically solved by applying Keller-box method. The influence of various embedded flow parameters on the local skin friction, the local Nusselt number and the local Sherwood number has been carefully analyzed through graphs. It is found that the shear stress and the rate of mass transfer increase with an increasing of current density JhJh while the reverse trend is observed on the rate of heat transfer. It is also found that the shear stress and the rate of heat transfer increase with an increasing of Sr  , whereas the reverse trend is observed on the rate of mass transfer. Further, the shear stress and the rate of mass transfer increase with an increasing of DuDu while the reverse trend is seen on the rate of heat transfer. The numerical results are compared and found to be in good agreement with previously published results under special cases.  相似文献   

2.
This paper investigates the effects of a magnetic field on the free convective flow of a viscous, incompressible, dissipative fluid through a porous medium, occupying a semi-infinite region of the space bounded by an infinite vertical and porous plate. The plate is subjected to a normal suction velocity and the heat flux at the plate is constant. The magnetic field is of uniform strength and is applied perpendicular to the plate. An analytical solution to the problem is obtained. The influence of the magnetic parameter (M) and permeability parameter (K) is discussed for the case of air (P = 0.71) when the plate is subjected to a constant suction velocity and is being cooled by free convection currents.  相似文献   

3.
This work is devoted to the study of symmetric control systems. It establishes a relation between internal symmetry and external one for a linear invariant control system having n real simple poles. The symmetric stabilization problem is studied using a symmetric feedback gain such that the output control stabilizes the closed-loop system. A necessary and sufficient condition is given to solve this stabilization problem for a symmetric control system (A,B,C) and a generalized symmetric control system (E,A,B,C).  相似文献   

4.
The observed properties of solar magnetic fields are reviewed, with particular reference to the complexities imposed on the field by motions of the highly conducting gas. Turbulent interactions between gas and field lead to heating or cooling of the gas according as the field energy density is less or greater than the maximum kinetic energy density in the convection zone. The field strength above which cooling sets in is 700 G.A weak solar dipole field may be primeval, but dynamo action is also important in generating new flux. The dynamo is probably not confined to the convection zone, but extends throughout most of the volume of the sun. Planetary tides appear to play a role in driving the dynamo.  相似文献   

5.
Determining an input matrix, i.e., locating predefined number of nodes (named “key nodes”) connected to external control sources that provide control signals, so as to minimize the cost of controlling a preselected subset of nodes (named “target nodes”) in directed networks is an outstanding issue. This problem arises especially in large natural and technological networks. To address this issue, we focus on directed networks with linear dynamics and propose an iterative method, termed as “L0-norm constraint based projected gradient method” (LPGM) in which the input matrix B is involved as a matrix variable. By introducing a chain rule for matrix differentiation, the gradient of the cost function with respect to B can be derived. This allows us to search B by applying probabilistic projection operator between two spaces, i.e., a real valued matrix space RN?×?M and a L0 norm matrix space RL0N×M by restricting the L0 norm of B as a fixed value of M. Then, the nodes that correspond to the M nonzero elements of the obtained input matrix (denoted as BL0) are selected as M key nodes, and each external control source is connected to a single key node. Simulation examples in real-life networks are presented to verify the potential of the proposed method. An interesting phenomenon we uncovered is that generally the control cost of scale free (SF) networks is higher than Erdos-Renyi (ER) networks using the same number of external control sources to control the same size of target nodes of networks with the same network size and mean degree. This work will deepen the understanding of optimal target control problems and provide new insights to locate key nodes for achieving minimum-cost control of target nodes in directed networks.  相似文献   

6.
We present dual-mode, on-demand droplet routing in a multiple-outlet microfluidic device using an oil-based magnetic fluid. Magnetite (Fe3O4) nanoparticle-contained oleic acid (MNOA) was used as a carrier phase for droplet generation and manipulation. The water-in-MNOA droplets were selectively distributed in a curved microchannel with three branches by utilizing both a hydrodynamic laminar flow pattern and an external magnetic field. Without the applied magnetic field, the droplets travelled along a hydrodynamic centerline that was displaced at each bifurcating junction. However, in the presence of a permanent magnet, they were repelled from the centerline and diverted into the desired channel when the repelled distance exceeded the minimum offset allocated to the channel. The repelled distance, which is proportional to the magnetic field gradient, was manipulated by controlling the magnet''s distance from the device. To evaluate routing performance, three different sizes of droplets with diameters of 63, 88, and 102 μm were directed into designated outlets with the magnet positioned at varying distances. The result demonstrated that the 102-μm droplets were sorted with an accuracy of ∼93%. Our technique enables on-demand droplet routing in multiple outlet channels by simply manipulating magnet positions (active mode) as well as size-based droplet separation with a fixed magnet position (passive mode).  相似文献   

7.
8.
Finite-time stability concerns the boundness of system during a fixed finite-time interval. For switched systems, finite-time stability property can be affected significantly by switching behavior; however, it was neglected by most previous research. In this paper, the problems of finite-time stability analysis and stabilization for switched nonlinear discrete-time systems are addressed. First, sufficient conditions are given to ensure a class of switched nonlinear discrete-time system subjected to norm bounded disturbance finite-time bounded under arbitrary switching, and then the results are extended to H finite-time boundness of switched nonlinear discrete-time systems. Finally based on the results on finite-time boundness, the state feedback controller is designed to H finite-time stabilize a switched nonlinear discrete-time system. A numerical design example is given to illustrate the proposed results within this paper.  相似文献   

9.
This paper is concerned with the observer-based H finite-time control problem for linear parameter-varying (LPV) systems with parameter-varying time delays and external disturbance. The main contribution is to design an observer-based H finite-time controller such that the resulting closed-loop system is uniformly finite-time bounded and satisfies a prescribed H disturbance attenuation level in a finite-time interval. By using the delay- and parameter-dependent multiple Lyapunov–Krasovskii functional approach, sufficient criteria on uniform H finite-time stabilization via observer-based state feedback are presented for the solvability of the problem, which can be tackled by a feasibility problem in terms of linear matrix inequalities. Finally, numerical examples are given to illustrate the validity of the proposed theoretical results.  相似文献   

10.
This paper is a review of the changes brought about in the magnetic properties of “iron” during the period 1870 to 1928 and shows the absurdity of using “iron” as a standard for comparison. The latest (1928) value for the initial permeability (μ0) of “iron” is given as 1150, its maximum permeability (μmax) as 61,000, and its hysteresis loss (Wh) as 300 ergs per cubic centimeter per cycle for B = 10,000 gausses. The corresponding values prior to 1900 were: μ0 = 250 μmax = 2600, Wh = 3,000.  相似文献   

11.
Here, we report the characterization of the transport of micro- and nanospheres in a simple two-dimensional square nanoscale plasmonic optical lattice. The optical potential was created by exciting plasmon resonance by way of illuminating an array of gold nanodiscs with a loosely focused Gaussian beam. This optical potential produced both in-lattice particle transport behavior, which was due to near-field optical gradient forces, and high-velocity (∼μm/s) out-of-lattice particle transport. As a comparison, the natural convection velocity field from a delocalized temperature profile produced by the photothermal heating of the nanoplasmonic array was computed in numerical simulations. This work elucidates the role of photothermal effects on micro- and nanoparticle transport in plasmonic optical lattices.  相似文献   

12.
In this paper, the simultaneous H stabilization problem is investigated for a physically interconnected large-scale system which works in multiple operation modes. A distributed wireless networked control framework is introduced, in which the distributed dynamic output feedback controllers not only use the local measurements, but also receive the neighboring controllers’ broadcasts via wireless networks. The channel fading in wireless communications is described as the Rice fading model. Our focus is on the design of the distributed controllers such that the large-scale system is mean-square stable in each operation mode and achieves a prescribed H disturbance attenuation level. By employing the Lyapunov functional method and related stochastic analysis techniques, a sufficient condition on the existence of desired controllers is presented, and the parameterization of the controller gains is derived. Finally, a numerical example is utilized to illustrate the feasibility of the proposed scheme.  相似文献   

13.
BackgroundCultivated peanut (Arachis hypogaea L.) is a major oilseed crop worldwide. Fatty acid composition of peanut oil may affect the flavor and shelf life of the resulting food products. Oleic acid and linoleic acid are the major fatty acids of peanut oil. The conversion from oleic acid to linoleic acid is controlled by the Δ12 fatty acid desaturase (FAD) encoded by AhFAD2A and AhFAD2B, two homoeologous genes from A and B subgenomes, respectively. One nucleotide substitution (G:C  A:T) of AhFAD2A and an “A” insertion of AhFAD2B resulted in high-oleic acid phenotype. Detection of AhFAD2 mutation had been achieved by cleaved amplified polymorphic sequence (CAPS), real-time polymerase chain reaction (qRT-PCR) and allele-specific PCR (AS-PCR). However, a low cost, high throughput and high specific method is still required to detect AhFAD2 genotype of large number of seeds. Kompetitive allele specific PCR (KASP) can detect both alleles in a single reaction. The aim of this work is to develop KASP for detection AhFAD2 genotype of large number of breeding materials.ResultsHere, we developed a KASP method to detect the genotypes of progenies between high oleic acid peanut and common peanut. Validation was carried out by CAPS analysis. The results from KASP assay and CAPS analysis were consistent. The genotype of 18 out of 179 BC4F2 seeds was aabb.ConclusionsDue to high accuracy, time saving, high throughput feature and low cost, KASP is more suitable for determining AhFAD2 genotype than other methods.  相似文献   

14.
Understanding the biological feeding strategy and characteristics of a microorganism as an actuator requires the detailed and quantitative measurement of flow velocity and flow rate induced by the microorganism. Although some velocimetry methods have been applied to examine the flow, the measured dimensions were limited to at most two-dimensional two-component measurements. Here we have developed a method to measure three-dimensional two-component flow velocity fields generated by the microorganism Vorticella picta using a piezoscanner and a confocal microscope. We obtained the two-component velocities of the flow field in a two-dimensional plane denoted as the XY plane, with an observation area of 455×341 μm2 and the resolution of 9.09 μm per each velocity vector by a confocal microparticle image velocimetry technique. The measurement of the flow field at each height took 37.5 ms, and it was repeated in 16 planes with a 2.50 μm separation in the Z direction. We reconstructed the three-dimensional two-component flow velocity field. From the reconstructed data, the flow velocity field [u(x,y,z),v(x,y,z)] in an arbitrary plane can be visualized. The flow rates through YZ and ZX planes were also calculated. During feeding, we examined a suction flow to the mouth of the Vorticella picta and measured it to be to 300 pl∕s.  相似文献   

15.
Magnetic loss in remanent state ferrites1 has generally been described through the artifice of a magnetic loss tangent (tanδm = μ?μ′). This characterization is not directly relatable to intrinsic material parameters. The results presented in this paper indicate that magnetic loss in the remanent state can be related to intrinsic material parameters by describing the ferrite mathematically by a complex “average” permeability tensor. The “average” permeability includes the effects of magnetocrystalline anistropy, remanent magnetization, linewidth and an average demagnetizing field appropriate to the distribution of magnetic domains. Experimental examples are given showing that excellent agreement is obtained between theoretically predicted and measured losses.  相似文献   

16.
One of the most significant challenges implementing colloidal magnetic nanoparticles in medicine is the efficient heating of microliter quantities by applying a low frequency alternating magnetic field. The ultimate goal is to accomplish nonsurgically the treatment of millimeter size tumors. Here, we demonstrate the synthesis, characterization, and the in vitro as well as in vivo efficiency of a dextran coated maghemite (γ-Fe2O3) ferrofluid with an exceptional response to magnetic heating. The difference to previous synthetic attempts is the high charge of the dextran coating, which according to our study maintains the colloidal stability and good dispersion of the ferrofluid during the magnetic heating stage. Specifically, in vitro 2 μl of the ferrofluid gives an outstanding temperature rise of 33 °C within 10 min, while in vivo treatment, by infusing 150 μl of the ferrofluid in animal model (rat) glioma tumors, causes an impressive cancer tissue dissolution.  相似文献   

17.
This paper is to study the mean square stabilizability and regional stability of discrete-time mean-field stochastic systems. Firstly, a necessary and sufficient condition is presented via the spectrum of linear operator to illustrate the stabilizability of discrete-time mean-field stochastic systems. B(0, γ)-stabilizability is introduced and transformed into solving linear matrix inequalities (LMIs). Secondly, BM-stability is characterized, especially, the stabilities of circular region, sector region and annulus regions are discussed extensively. Finally, as applications, it is shown that B(0, γ1; γ2)-stability has close relationship with the decay rate of the system state response and the Lyapunov exponent.  相似文献   

18.
The problem of adaptive stabilization of a class of continuous-time and time-varying nonlinear plants is treated in this paper. The control scheme guarantees that the state of the plant, with bounded time-varying parameters, asymptotically converges to zero. For the nonlinear case with n2+n unknown parameters (n time-varying and n2 constant), when the control matrix B is unknown the controller has to adjust n2+1 parameters providing only local stability results. On the contrary, when the control matrix B is known only one parameter has to be adjusted and the proposed scheme provides global stability results. The general methodology is particularized for the linear case with 2n2 unknown parameters (n2 time-varying and n2 constant), adjusting n2+1 parameters when the control matrix B is unknown and guarantees only local stability results, whereas in the case when the control matrix B is known only one parameter has to be adjusted and the proposed scheme provides global stability results.  相似文献   

19.
This paper is concerned with the strong γc-γcl H stabilization problem for networked control systems (NCSs) subject to denial of service (DoS) attacks, which are common attack behaviors that affect the packet transmission of measurement or control signals. The purpose of the problem under consideration is to design a stable dynamic output feedback (DOF) controller (strong stabilizing controller) with the prescribed H performance norm bound γc to tolerate multiple packet dropouts caused by DoS attacks, such that, the closed-loop system is mean-square stable and captures the H disturbance attenuation norm bound γcl. Based on the Lyapunov functional and the stochastic control approach, some sufficient conditions with the form of matrix inequalities for the existence of the desired stable DOF controller are established. Then, by an orthogonal complement space technique, the controller gain is parameterized. Next, an iterative linear matrix inequality (LMI) algorithm is developed to obtain the controller gain. Finally, the usefulness of the proposed method is indicated by a numerical simulation example.  相似文献   

20.
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号