首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The purpose of this study was to evaluate the traction characteristics of four different stud configurations on Fédération Internationale de Football Association (FIFA) 2-Star, third-generation artificial soccer turf. The investigated stud configurations were hard ground design, firm ground design, soft ground design, and an experimental prototype. The concept of this study combines performance, perception, biomechanical, and mechanical testing procedures. Twenty-five soccer players took part in the different testing procedures. Variables of this study were: running times, subjective rankings/ratings, ground reaction forces, and mechanical traction properties. Statistical discrimination between the four stud configurations was shown for performance, perception, and biomechanical testing (p < 0.05). Unsuited stud configurations for playing on artificial turf are characterized by less plain distributed and pronounced studs.  相似文献   

2.
The existing knowledge of traction on artificial turf is based almost exclusively on mechanical devices. While most attention has traditionally been concentrated on rotational traction, sports such as soccer predominantly involve translational movements. The aim of the study was to investigate whether translational traction at the shoe-surface interface differed between various third-generation artificial turf systems in combination with different cleat configurations in vivo. Twenty-two male soccer players performed five short sprints with a 90° cut over a turf-covered force plate for each combination of three turf systems and three cleat configurations. The results showed that, despite various differences in other traction measures, traction coefficients were almost identical across turf systems and cleat configurations.  相似文献   

3.
It is desirable for the studs of a soccer shoe to penetrate the sport surface and provide the player with sufficient traction when accelerating. Mechanical tests are often used to measure the traction of shoe–surface combinations. Mechanical testing offers a repeatable measure of shoe–surface traction, eliminating the inherent uncertainties that exist when human participant testing is employed, and are hence used to directly compare the performance of shoe–surface combinations. However, the influence specific surface characteristics has on traction is often overlooked. Examining the influence of surface characteristics on mechanical test results improves the understanding of the traction mechanisms at the shoe–surface interface. This allows footwear developers to make informed decisions on the design of studded outsoles. The aim of this paper is to understand the effect gravimetric moisture content has on the tribological mechanisms at play during stud–surface interaction. This study investigates the relationships between: the gravimetric moisture content of a natural sand-based soccer surface; surface stiffness measured via a bespoke impact test device; and surface traction measured via a bespoke mechanical test device. Regression analysis revealed that surface stiffness decreases linearly with increased gravimetric moisture content (p = 0.04). Traction was found to initially increase and then decrease with gravimetric moisture content. It was observed that: a surface of low moisture content provides low stud penetration and therefore reduced traction; a surface of high moisture content provides high stud penetration but also reduced traction due to a lubricating effect; and surfaces with moisture content in between the two extremes provide increased traction. In this study a standard commercially available stud was used and other studs may provide slightly different results. The results provide insight into the traction mechanisms at the stud–surface interface which are described in the paper. The variation between traction measurements shows the influence gravimetric moisture content will have on player performance. This highlights the requirement to understand surface conditions prior to making comparative shoe–surface traction studies and the importance of using a studded outsole that is appropriate to the surface condition during play.  相似文献   

4.
The aim of this cross-sectional study was to compare bone mass in young female athletes playing ball games on different types of playing surfaces. About 120 girls, 9–13 years of age (10.6 ± 1.5 years old Tanner I–III) were recruited and divided into prepubertal and pubertal groups. The sample represented 3 groups of athletes: soccer (N = 40), basketball (N = 40), and handball (N = 40); and 6 different playing surfaces (soccer – ground, soccer – artificial turf, basketball – synthetic, basketball – parquet, handball – synthetic, and handball – smooth concrete). Total and regional body composition (bone mass, fat mass, and lean mass) were measured by dual-energy X-ray absorptiometry (DXA). The mechanical properties of the surfaces (force reduction, vertical deformation, and energy return) were measured with the Advanced Artificial Athlete (Triple A) method. The degree of sexual development was determined using Tanner test. The pubertal group showed that soccer players on the ground, basketball players on synthetic, and handball players on smooth concrete had higher values of bone mineral content (BMC) and bone mineral density (BMD) (P < 0.05) than the soccer players on the artificial turf, basketball players on parquet, and handball players on synthetic. In conclusion, a hard playing surface, with less vertical deformation and force reduction, and greater energy return, is associated with higher levels of BMD and BMC in growing girls, regardless of the sport they practice.  相似文献   

5.
Plantar loading may influence comfort, performance and injury risk in soccer boots. This study investigated the effect of cleat configuration and insole cushioning levels on perception of comfort and in-shoe plantar pressures at the heel and fifth metatarsal head region. Nine soccer academy players (age 15.7 ± 1.6 years; height 1.80 ± 0.40 m; body mass 71.9 ± 6.1 kg) took part in the study. Two boot models (8 and 6 cleats) and two insoles (Poron and Poron/gel) provided four footwear combinations assessed using pressure insoles during running and 180° turning. Mechanical and comfort perception tests differentiated boot and insole conditions. During biomechanical testing, the Poron insole generally provided lower peak pressures than the Poron/gel insole, particularly during the braking step of the turn. The boot model did not independently influence peak pressures at the fifth metatarsal, and had minimal influence on heel loads. Specific boot-insole combinations performed differently (P < 0.05). The 8-cleat boot and the Poron insole performed best biomechanically and perceptually, but the combined condition did not. Inclusion of kinematic data and improved control of the turning technique are recommended to strengthen future research. The mechanical, perception and biomechanical results highlight the need for a multi-faceted approach in the assessment of footwear.  相似文献   

6.
Artificial turf advances have enabled surfaces to behave like natural grass, however, debate remains as to whether artificial turf is as safe as natural grass. To reduce injury risk, sport surfaces should have low rotational traction with artificial surfaces having a potential advantage as components can be manipulated to change surface properties and traction. The purpose of this study was to investigate the influence that different components of artificial turf have on rotational traction and athlete lower extremity joint loading. Twelve surfaces underwent mechanical testing to determine the influence of fibre density, fibre length, infill composition and compaction on rotational traction. Following mechanical testing, Control, Low and High Traction surfaces were selected for biomechanical analysis, where sixteen athletes performed maximum effort v-cuts while kinematic/kinetic data were recorded on each surface. Mechanically, fibre density, type of infill and compaction of the surface each independently influenced traction. The traction differences were substantial enough to alter the athlete kinematics and kinetics. Low traction surfaces reduced ankle and knee loading, while high traction surfaces increased ankle and knee loading . Reducing the rotational traction of sport surfaces is possible through alterations of individual components, which may reduce the joint loading at the knee and ankle joint.  相似文献   

7.
The risk of soccer players sustaining mild traumatic brain injury (MTBI) following head impact with a playing surface is unclear. This study investigates MTBI by performing headform impact tests from varying heights onto a range of third-generation artificial turf surfaces. Each turf was prepared as per manufacturers specifications within a laboratory, before being tested immediately following installation and then again after a bedding-in period. Each turf was tested dry and when wetted to saturation. Data from the laboratory tests were compared to an in situ third-generation surface and a professional grass surface. The surface performance threshold was set at a head impact criterion (HIC) = 400, which equates to a 10% risk of the head impact causing MTBI. All six third-generation surfaces had a >10% risk of MTBI from a fall >0.77 m; the inferior surfaces required a fall from just 0.46 m to have a 10% MTBI risk. Wetting the artificial turf did not produce a statistically significant improvement (P > 0.01). The in situ third-generation playing surface produced HIC values within the range of bedded-in experimental values. However, the natural turf pitch was the superior performer – necessitating fall heights exceeding those achievable during games to achieve HIC = 400.  相似文献   

8.
Abstract

The aim of this study was to compare the incidence, nature, and cause of injuries sustained in rugby union played on artificial turf and grass. The study comprised a two-season investigation of match injuries sustained by six teams competing in Hong Kong's Division 1 and training injuries sustained by two teams in the English Premiership. Injury definitions and recording procedures were compliant with the international consensus statement on epidemiological studies of injuries in rugby union. There were no significant differences in the overall incidence (rate ratio = 1.42; P = 0.134) or severity (P = 0.620) of match injuries sustained on the two surfaces. The lower limb and joint (non-bone)/ligament injuries were the most common location and type of match injury on both surfaces; the incidence of anterior cruciate ligament injuries was nearly four times higher on artificial turf than grass but the difference was not statistically significant (rate ratio = 3.82; P = 0.222). There were no significant differences in the overall incidence (rate ratio = 1.36; P = 0.204) or severity (P = 0.302) of training injuries sustained on artificial turf and grass. The lower limb and muscle/tendon injuries were the most common location and type of training injury on both surfaces. The results indicate that the overall risks of injury on artificial turf are not significantly different from those experienced on grass; however, the difference in the incidence of anterior cruciate ligament injuries on the two surfaces is worthy of further study.  相似文献   

9.
Soccer boots are the most important piece of equipment used by a soccer player. They have been improved from heavy bold leather shoes to lightweight aerodynamic designer objects. As traction is one of the key factors of performance, industry experiments with new stud designs, hoping to improve traction behaviour in the different directions. However, excessive traction may contribute to the occurrence of non-contact injuries of the anterior cruciate ligament (ACL). Therefore, many researchers have investigated the shoe-surface interaction of studded boots with mechanical test devices. As yet, a final conclusion regarding correlation between stud design and ACL injuries has not been obtained. Most of the current test devices do not test the soccer boots under game-relevant loading conditions. A new approach has been taken in order to overcome this limitation. In the first step, real ACL injury situations were analysed in detail. The results of this analysis were then used as input data for a multi-body computer model of the human body, to calculate internal forces at the injured leg. Based on this data, a new test device, the TrakTester, was developed including an artificial lower leg with a replica human ankle joint. This paper presents details of the development of the new traction test device and gives an overview of the research options the TrakTester may provide for the future.  相似文献   

10.
Multiple playing surfaces and footwear used in American football warrant a better understanding of relationship between different combinations of turf and footwear. The purpose of this study was to examine effects of shoe and stud types on ground reaction force (GRF) and ankle and knee kinematics of a 180° cut and a single-leg 90° land-cut on synthetic turf. Fourteen recreational football players performed five trials of the 180° cut and 90° land-cut in three shoe conditions: non-studded running shoe, and football shoe with natural and synthetic turf studs. Variables were analyzed with a 3 × 2 (shoe × movement) repeated measures analysis of variance (p < 0.05). Peak vertical GRF (p < 0.001) and loading rate (p < 0.001) were greater during 90° land-cut than 180° cut. For 180° cut, natural turf studs produced smaller peak medial GRFs compared to synthetic turf studs and non-studded shoe (p = 0.012). For land-cut, peak eversion velocity was reduced in running shoes compared to natural (p = 0.016) and synthetic (p = 0.002) turf studs. The 90° land-cut movement resulted in greater peak vertical GRF and loading rate compared to the 180° cut. Overall, increased GRFs in the 90° land-cut movement may increase the chance of injury.  相似文献   

11.
The aim of this study was to investigate the effect of playing surface on physiological and performance responses during and in the 48 h after simulated soccer match play. Blood lactate, single-sprint, repeated-sprint and agility of eight amateur soccer players were assessed throughout a 90-min soccer-simulation protocol (SSP) completed on natural turf (NT) and artificial turf. Counter-movement jump, multiple-rebound jump, sprint (10 m, 60 m), L-agility run (L-AR), creatine kinase (CK) and perception of muscle soreness (PMS) were measured before, immediately after, 24 h and 48 h after exercise. Analyses revealed significant changes in blood lactate and single-sprint performance (both P < 0.05) during the SSP but with no significant differences between surfaces. Conversely, repeated-sprint performance demonstrated an interaction effect, with reductions in performance evident on NT only (P < 0.05). Whilst L-AR and 10-m sprint performance remained unchanged, 60-m sprint and multiple-rebound jump performance were impaired, and PMS and CK were elevated immediately following the SSP (all P < 0.05) but with no surface effects. Although performance, CK and PMS were negatively affected to some degree in the 48 h after the SSP, there was no surface effect. For the artificial and natural surfaces used in the present study, physiological and performance responses to simulated soccer match play appear to be similar. Whilst a potential for small differences in performance response exists during activity, surface type does not affect the pattern of recovery following simulated match play.  相似文献   

12.
ABSTRACT

We aimed to determine key biomechanical parameters explaining age-related jumping performance differences in youth elite female soccer players. Multiple biomechanical parameters from countermovement (CMJ) squat (SJ) and drop (DJ) jump testing of elite female soccer players (n = 60) within the same national training centre were analysed across ages 9-11y, 12-14y and 15-19y. Effects of age group and jump type on jump height were found, with the older jumping higher than the younger groups in all jumps (P < 0.05). For DJ, higher reactive strength index was found for older, compared to each younger group (P < 0.001). For CMJ and SJ, peak power was the most decisive characteristic, with significant differences between each group for absolute peak power (P < 0.0001) and body-weight-normalised peak power in CMJ (57 ± 7W/kg, 50 ± 7W/kg, 44.7 ± 5.5W/kg; P < 0.05) and between the older and each younger group in SJ (56.7 ± 7.1W/kg, 48.9 ± 7.1W/kg, 44.6 ± 6W/kg; P < 0.01). Age-related differences in jumping performance in youth elite female soccer players appear to be due to power production during standing jumps and by the ability to jump with shorter ground contact times during reactive jumps.  相似文献   

13.
This study quantified the mechanical interactions of 19 American football cleats with a natural grass and an infill-type artificial surface under loading conditions designed to represent play-relevant manoeuvres of elite athletes. Variation in peak forces and torques was observed across cleats when tested on natural grass (2.8–4.2 kN in translation, 120–174 Nm in rotation). A significant (p < 0.05) relationship was found between the peak force and torque on natural grass. Almost all of the cleats caused shear failure of the natural surface, which generated a divot following a test. This is a force-limiting cleat release mode. In contrast, all but one of the cleat types held fast in the artificial turf, resulting in force and torque limited by the prescribed input load from the test device (nom. 4.8 kN and 200 Nm). Only one cleat pattern, consisting of small deformable nubs, released on the artificial surface and generated force (3.9 kN) comparable to the range observed with natural grass. These findings (1) should inform the design of cleats intended for use on natural and artificial surfaces and (2) suggest a mechanical explanation for a higher lower-limb injury rate in elite athletes playing on artificial surfaces.  相似文献   

14.
The aim of this study was to investigate, for typical shoes and surfaces used in tennis, the relative role of the shoe and surface in providing cushioning during running. Five test surfaces ranging from concrete to artificial turf were selected, together with two shoe models. Impact absorbing ability was assessed mechanically using drop test procedures and biomechanically using peak magnitude and rate of loading of impact force and peak in-shoe pressure data at the lateral heel. Differences in biomechanical variables between shoe-surface combinations were identified using a two-way ANOVA (p < 0.05). Mechanical test results were found to rank the surfaces in the same order regardless of the shoe model, suggesting that the surface is influential in providing cushioning. However, for all mechanical and biomechanical (p < 0.05) variables representing impact absorbing ability, it was found that the difference between shoes was markedly greater than the differences between surfaces. The peak heel pressure data were found to rank the surfaces in the same order as the mechanical tests, while impact force data were not as sensitive to the changes in surface. Correlations between mechanical and biomechanical impact absorption highlighted the importance of testing the shoe-surface combination in mechanical tests, rather than the surface alone. In conclusion, mechanical testing of the shoe-surface combination was found to provide a strong predictor of the impact absorbing ability during running if pressure data were used. In addition, for typical shoe-surface combinations in tennis, the shoe was found to have more potential than the surface to influence impact loading during running. Finally, in-shoe pressure data were found to be more sensitive than force plate data to changes in material cushioning.  相似文献   

15.
A protocol has been developed to obtain two-dimensional kinematic shoe data of football players in their training environment through high-speed video analysis. Such kinematic data can provide an understanding of how to better replicate the boundary conditions of football movements when simulated using mechanical traction and penetration test devices. As part of a pilot study, 11 youth academy players from a Premiership football club performed football-specific movements which were filmed at 1000 frames s-1. The protocol required minimal set-up time and the area of the pitch to be filmed could be positioned in any part of the playing area, causing low disruption to the players. This aimed to ensure that the movements performed were representative of those carried out during competitive play. Results in this study are concerned with the kinematics of the shoe during contact with the ground for movements identified to be important in terms of injury risk and loss of performance (slipping). Shoe velocities and orientations were measured for subjects wearing shoes of different stud types (traditional round studs versus contemporary bladed studs) on two surfaces (artificial turf, in-filled with rubber and sand, versus a natural surface). All the parameters measured from the relatively small population of subjects had high variances and therefore few significant effects of studs and surface could be found. The data does however provide insight into the appropriate boundary conditions to be used in mechanical test devices. For example, in the forefoot push-off movement it can be seen that test devices should measure the traction forces when the shoe first starts to move, as this is when the player would lose performance, as opposed to the maximum traction which can occur after significant displacement of the shoe through the surface. Analysis of the orientation and velocity path of the studs just before contact with the ground shows that the studs could be aligned to enhance their penetration into the surface and optimise the traction properties of the studs. In order to determine the orientation and velocity of the shoes at crucial phases in movements force-plate data obtained in the laboratory should be utilised in future studies.  相似文献   

16.
Anterior cruciate ligament (ACL) injury prevention programmes have not been as successful at reducing injury rates in women’s basketball as in soccer. This randomised controlled trial (ClinicalTrials.gov #NCT02530333) compared biomechanical adaptations in basketball and soccer players during jump-landing activities after an ACL injury prevention programme. Eighty-seven athletes were cluster randomised into intervention (6-week programme) and control groups. Three-dimensional biomechanical analyses of drop vertical jump (DVJ), double- (SAG-DL) and single-leg (SAG-SL) sagittal, and double- (FRONT-DL) and single-leg (FRONT-SL) frontal plane jump landing tasks were tested before and after the intervention. Peak angles, excursions, and joint moments were analysed using two-way MANCOVAs of post-test scores while controlling for pre-test scores. During SAG-SL the basketball intervention group exhibited increased peak knee abduction angles (p = .004) and excursions (p = .003) compared to the basketball control group (p = .01) and soccer intervention group (p = .01). During FRONT-SL, the basketball intervention group exhibited greater knee flexion excursion after training than the control group (p = .01), but not the soccer intervention group (p = .11). Although women’s soccer players exhibit greater improvements in knee abduction kinematics than basketball players, these athletes largely exhibit similar biomechanical adaptations to ACL injury prevention programmes.  相似文献   

17.
There are differences in ground reaction force when wearing soccer boots compared with training shoes on a natural turf surface. Two natural-turf-covered force platforms, located outdoors in a field, allowed comparison of performance when six-studded soccer boots and soccer training shoes were worn during straight fast running (5.4 m s-1 ± 0.27 m s-1) and slow running (4.4 ms-1 ± 0.22 m s-1). Six male soccer players (mean age: 25 ± 4.18 years; mean mass 79.7 ±9.32 kg) struck the first platform with the right foot and the second platform with the left foot. In fast running, the mean vertical impact peak was significantly greater in soccer boots (2.706 BW) than in training shoes (2.496 BW) when both the right and left foot were considered together and averaged (P = 0.003). Similarly, the mean vertical impact peak loading rate was greater when wearing soccer boots at 26.09 BWs-1 compared to training shoes (21.32 BWs-1;P = 0.002). Notably, the mean vertical impact peak loading rate of the left foot (boots: 28.07 BWs-1; shoes: 22.52 BWs-1) was significantly greater than the right foot (boots: 24.11 BWs-1; shoes: 20.11 BWs-1) in both boots and shoes (P = 0.018). The braking force was greater for the left foot (P = 0.013). In contrast, mean peak vertical propulsion forces were greater for the right foot (P > 0.001) when either soccer boots or training shoes were considered. Similar significant trends were evident in slow running, and, notably, in both soccer boots and training shoes medial forces were greater for the left foot (P = 0.008) and lateral forces greater for the right foot (P = 0.011). This study showed the natural turf ground reaction force measurement system can highlight differences in footwear in an ecological environment. Greater forces and impact loading rates occurred during running activity in soccer boots than in training shoes, with soccer boots showing reduced shock attenuation at impact. Such findings may have implications for impact-related injuries with sustained exposure, especially on harder natural-turf surfaces. There were differences in the forces occurring at the right and left feet with the ground, thus suggesting the use of bipedal monitoring of ground reaction forces.  相似文献   

18.
The aim of this study was to examine the impact of contextual factors on relative locomotor and metabolic power distances during professional female soccer matches. Twenty-eight players (forwards, n?=?4; midfielders, n?=?12; defenders, n?=?12) that competed in a 90-min home and away match (regular season only). The generalised estimating equations (GEE) was used to evaluate relative locomotor and metabolic power distances for three contextual factors: location (home vs. away), type of turf (natural vs. artificial), and match outcome (win, loss and draw). No differences were observed for home vs. away matches. Moderate-intensity running (20.0?±?1.0?m?min?1 and 16.4?±?0.9?m?min?1), high-intensity running (8.6?±?0.4?m?min?1 and 7.3?±?0.4?m?min?1) and high-metabolic power (16.3?±?0.5?m?min?1 and 14.4?±?0.5?m?min?1) distances were elevated on artificial turf compared to natural grass, respectively. Relative sprint distance was greater during losses compared with draws (4.3?±?0.4?m?min?1 and 3.4?±?0.3?m?min?1). Overall physical demands of professional women’s soccer were not impacted by match location. However, the elevation of moderate and high-intensity demands while playing on artificial turf may have implications on match preparations as well as recovery strategies.  相似文献   

19.
Abstract

In spite of the increased acceptance of artificial turf in football, few studies have investigated if matches are altered by the type of surface used and no research has compared physiological responses to football activity on artificial and natural surfaces. In the present study, participants performed a football match simulation on high-quality artificial and natural surfaces. Neither mean heart rate (171 ± 9 beats · min?1 vs. 171 ± 9 beats · min?1; P > 0.05) nor blood lactate (4.8 ± 1.6 mM vs. 5.3 ± 1.8 mM; P > 0.05) differed between the artificial and natural surface, respectively. Measures of sprint, jumping and agility performance declined through the match simulation but surface type did not affect the decrease in performance. For example, the fatigue index of repeated sprints did not differ (P > 0.05) between the artificial, (6.9 ± 2.1%) and natural surface (7.4 ± 2.4%). The ability to turn after sprinting was affected by surface type but this difference was dependent on the type of turn. Although there were small differences in the ability to perform certain movements between artificial and natural surfaces, the results suggest that fatigue and physiological responses to football activity do not differ markedly between surface-type using the high-quality pitches of the present study.  相似文献   

20.
Abstract

The aim of this study was to investigate the effect of ingesting a carbohydrate-electrolyte solution, during the 90-min Loughborough Intermittent Shuttle Test, on soccer skill performance. Seventeen male soccer players ingested either a 6.4% carbohydrate-electrolyte solution or placebo solution equivalent to 8 ml · kg?1 body mass before exercise and 3 ml · kg?1 body mass after every 15 min of exercise, in a double-blind randomized cross-over design, with the trials separated by 7 days. The evening before the main trial, the participants performed glycogen-reducing exercise on a cycle ergometer (80 min at 70%[Vdot]O2max) and were then fed a low-carbohydrate meal. After a 12-h overnight fast, they performed The Loughborough Soccer Passing Test before and after every 15 min of exercise. Analysis of the combined skill test data showed a significant time effect (P = 0.001) with differences between 0–45 and 75–90 min (P < 0.05). There was a 3% reduction in skill performance from before to after exercise in the carbohydrate-electrolyte trial, whereas in the placebo trial the decrease was 14% (P = 0.07). In conclusion, skill performance during the simulated soccer activity appeared to deteriorate in the last 15–30 min of exercise. However, providing 52 g · h?1 carbohydrate during exercise showed a tendency to better maintain soccer skill performance than a taste-matched placebo.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号