首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
The purpose of this investigation was to detect whether differences exist concerning the dynamic and kinematic parameters of vertical squat jump (SJ) on rigid (RS) and sand (SS) surface. Fifteen elite male beach volleyball players (age: 25.6 +/- 6.2 years; height: 188.0 +/- 3.5 cm; body mass: 83.2 +/- 6.0 kg; mean +/- SD, respectively) performed SJ. Force platform and kinematic analyses were used with paired sample T-tests to evaluate the differences. Vertical jump height was significantly smaller (p < .001) on SS than RS. Maximal force and maximal power were significantly higher on RS than SS (p < .05 and p < .01 respectively). Impulse time was larger in SS but with no significant difference (p = .286). Kinematic analysis revealed significant differences between the values of ankle joint during starting posture (p < .01) and of hip joint at the moment of take-off (p < .05). Ankle joint range of motion and angular velocity was larger in SS (p < .05). In conclusion, SJ height on SS was smaller than on RS because of the compliance and the instability of the sand. This resulted in a reduction in maximum force and take-off velocity. Furthermore, the compliance of SS made it hard for the ankle to push along the vertical axis of the movement of the body and as a result it slipped behind in an attempt to maximize propulsion. As a result, the body tries to balance and equalise this movement and move the hip to larger extension.  相似文献   

2.
The purpose of this study was to investigate the possible arm swing effect on the biomechanical parameters of vertical counter movement jump due to differences of the compliance of the take-off surface. Fifteen elite male beach-volleyball players (26.2 ± 5.9 years; 1.87 ± 0.05 m; 83.4 ± 6.0 kg; mean ± standard deviation, respectively) performed counter movement jumps on sand and on a rigid surface with and without an arm swing. Results showed significant (p < .05) surface effects on the jump height, the ankle joint angle at the lowest height of the body center of mass and the ankle angular velocity. Also, significant arm swing effects were found on jump height, maximum power output, temporal parameters, range of motion and angular velocity of the hip. These findings could be attributed to the instability of the sand, which resulted in reduced peak power output due to the differences of body configuration at the lowest body position and lower limb joints’ range of motion. The combined effect of the backward arm swing and the recoil of the sand that resulted in decreased resistance at ankle plantar flexion should be controlled at the preparation of selected jumping tasks in beach-volleyball.  相似文献   

3.
Abstract

The aim of the present study was to investigate the kinematic and kinetic differences in the execution of vertical jumps between individuals with good and poor ankle dorsiflexion. Fifteen physical education students were assigned to the flexible group (FG), while another 15 were assigned to the inflexible group (IFG). The two groups executed countermovement jumps (CMJ) and drop jumps from a 60 cm height (DJ60). For the CMJ, the FG jumped higher (32.0 ± 4.0 cm vs. 30.2 ± 4.9 cm, P = 0.27) and used a greater range of motion in all leg joints. The IFG jumpers raised their heels off the ground and had a greater horizontal distance between the centre of mass of the trunk and the centre of the hip joint (LCMh 25.6 ± 3.4 cm vs. 30.9 ± 4.3 cm, P < 0.001). In the DJ60 the FG jumped higher (22.4 ± 5.9 cm vs. 19.5 ± 4.6 cm, P = 0.14) with a greater vertical shift of the body centre of mass (BCM) (S = 0.45 ± 0.11 cm vs. 0.36 ± 0.05 cm, P < 0.01) and better joint coordination. The IFG jumpers changed the position of their trunk and heels depending on the jump type. Trainers should reconsider the technical issues of vertical jumps according to the flexibility of the ankle joint.  相似文献   

4.
Abstract

The present study aimed to quantify the intensity of lower extremity plyometric exercises by determining joint mechanical output. Ten men (age, 27.3 ± 4.1 years; height, 173.6 ± 5.4 cm; weight, 69.4 ± 6.0 kg; 1-repetition maximum [1RM] load in back squat 118.5 ± 12.0 kg) performed the following seven plyometric exercises: two-foot ankle hop, repeated squat jump, double-leg hop, depth jumps from 30 and 60 cm, and single-leg and double-leg tuck jumps. Mechanical output variables (torque, angular impulse, power, and work) at the lower limb joints were determined using inverse-dynamics analysis. For all measured variables, ANOVA revealed significant main effects of exercise type for all joints (P < 0.05) along with significant interactions between joint and exercise (P < 0.01), indicating that the influence of exercise type on mechanical output varied among joints. Paired comparisons revealed that there were marked differences in mechanical output at the ankle and hip joints; most of the variables at the ankle joint were greatest for two-foot ankle hop and tuck jumps, while most hip joint variables were greatest for repeated squat jump or double-leg hop. The present results indicate the necessity for determining mechanical output for each joint when evaluating the intensity of plyometric exercises.  相似文献   

5.
Abstract

This study aimed to investigate the contributions of kinetic and kinematic parameters to inter-individual variation in countermovement jump (CMJ) performance. Two-dimensional kinematic data and ground reaction forces during a CMJ were recorded for 18 males of varying jumping experience. Ten kinetic and eight kinematic parameters were determined for each performance, describing peak lower-limb joint torques and powers, concentric knee extension rate of torque development and CMJ technique. Participants also completed a series of isometric knee extensions to measure the rate of torque development and peak torque. CMJ height ranged from 0.38 to 0.73 m (mean 0.55 ± 0.09 m). CMJ peak knee power, peak ankle power and take-off shoulder angle explained 74% of this observed variation. CMJ kinematic (58%) and CMJ kinetic (57%) parameters explained a much larger proportion of the jump height variation than the isometric parameters (18%), suggesting that coachable technique factors and the joint kinetics during the jump are important determinants of CMJ performance. Technique, specifically greater ankle plantar-flexion and shoulder flexion at take-off (together explaining 58% of the CMJ height variation), likely influences the extent to which maximal muscle capabilities can be utilised during the jump.  相似文献   

6.
Purpose: There is uncertainty as to which knee angle during a squat jump (SJ) produces maximal jump performance. Importantly, understanding this information will aid in determining appropriate ratios for assessment and monitoring of the explosive characteristics of athletes. Method: This study compared SJ performance across different knee angles—90º, 100º, 110º, 120º, 130º, and a self-selected depth—for jump height and other kinetic characteristics. For comparison between SJ and an unconstrained dynamic movement, participants also performed a countermovement jump from a self-selected depth. Thirteen participants (Mage = 25.4 ± 3.5 years, Mheight = 1.8 ± 0.06 m, Mweight = 79.8 ± 9.5 kg) were recruited and tested for their SJ performance. Results: In the SJ, maximal jump height (35.4 ± 4.6 cm) was produced using a self-selected knee angle (98.7 ± 11.2°). Differences between 90°, 100°, and self-selected knee angles for jump height were trivial (ES ± 90% CL = 90°–100° 0.23 ± 0.12, 90°–SS ?0.04 ± 0.12, 100°–SS ?0.27 ± 0.20; 0.5–2.4 cm) and not statistically different. Differences between all other knee angles for jump height ranged from 3.8 ± 2.0 cm (mean ± 90% CL) to 16.6 ± 2.2 cm. A similar outcome to jump height was observed for velocity, force relative to body weight, and impulse for the assessed knee angles. Conclusions: For young physically active adult men, the use of a self-selected depth in the SJ results in optimal performance and has only a trivial difference to a constrained knee angle of either 90° or 100°.  相似文献   

7.
ABSTRACT

The aim of this investigation was to assess the reliability and validity of the Fitjump system. Fifty-seven participants (age = 22.62 ± 5.24 years, height = 180.69 ± 12.53 cm, body mass = 75.61 ± 9.56 kg) performed three countermovement jump (CMJ) and squat jump (SJ) with a 1-week interval for test and retest reliability. For validity, the participants performed the same jump protocol on the force platform while being simultaneously measured with the Fitjump system. There was excellent test–retest reliability of the Fitjump system for CMJ and SJ with high intraclass correlation coefficient (ICCs) (0.97 and 0.97, respectively), low coefficient variation (CVs) (2.3% and 2.4%, respectively), and low typical error of estimate [(TEE (%)] (4.0% and 4.4%, respectively). For validity, ICCs were extremely high for CMJ and SJ (0.93 and 0.94, respectively), with low TEE (%) (2.9% and 2.0%, respectively). However, Fitjump overestimated jump height for CMJ and SJ (3.54 and 3.37 cm, respectively; p < 0.001) when compared with the force platform. As a conclusion, the Fitjump system demonstrated excellent test–retest reliability and high relationship with a systematic bias for validity. Therefore, the Fitjump system can be used as a portable tool for monitoring vertical jump changes over time, but it should not be used interchangeably with a force platform.  相似文献   

8.
ABSTRACT

We aimed to determine key biomechanical parameters explaining age-related jumping performance differences in youth elite female soccer players. Multiple biomechanical parameters from countermovement (CMJ) squat (SJ) and drop (DJ) jump testing of elite female soccer players (n = 60) within the same national training centre were analysed across ages 9-11y, 12-14y and 15-19y. Effects of age group and jump type on jump height were found, with the older jumping higher than the younger groups in all jumps (P < 0.05). For DJ, higher reactive strength index was found for older, compared to each younger group (P < 0.001). For CMJ and SJ, peak power was the most decisive characteristic, with significant differences between each group for absolute peak power (P < 0.0001) and body-weight-normalised peak power in CMJ (57 ± 7W/kg, 50 ± 7W/kg, 44.7 ± 5.5W/kg; P < 0.05) and between the older and each younger group in SJ (56.7 ± 7.1W/kg, 48.9 ± 7.1W/kg, 44.6 ± 6W/kg; P < 0.01). Age-related differences in jumping performance in youth elite female soccer players appear to be due to power production during standing jumps and by the ability to jump with shorter ground contact times during reactive jumps.  相似文献   

9.
The purpose of this study was twofold: (1) to determine the barbell load that maximised the system power as well as the ankle, knee, and hip joint powers during the squat jump, and (2) to compare the system powers computed from two different methods: the centre of mass (COM) method and the barbell method. Seven male throwers were recruited in this study. The system power (COM method) and the ankle, knee, and hip joint powers were determined with the load incrementally set at 0%, 10%, 30%, 50%, 70%, and 90% of one repetition maximum. The largest system power was observed at the load of 30% (p < 0.008) while the largest ankle and knee powers were observed at 70% and 0% (p < 0.05). The barbell method overestimated the system power (p < 0.001) when compared to the COM method. It was concluded that the barbell method could influence load optimisation in squat jump. The optimal barbell load which maximised the system power did not maximise the ankle, knee, or hip power simultaneously.  相似文献   

10.
ABSTRACT

The study objective was to examine the effects of three days of sleep restriction on maximal jump performance and joint coordination. Eleven elite cyclists obtained a one-week baseline of habitual sleep then restricted sleep to 4 h/night (SR) for three nights assessed through self-report and actigraphy. Pre and post-intervention measures were a box drop maximal vertical jump with 3D motion capture to assess physical performance and biomechanical changes, and Psychomotor Vigilance Task (PVT) assessed changes in response time. Associations between biomechanical, physical, and cognitive performance measures were assessed. Participants restricted reported sleep from 7.4 ± 0.5 h/night at baseline to 4.0 ± 0.2 h/night and actigraphy indicated 6.7 ± 0.7 to 3.7 ± 0.2 h/night. Following SR, jump height decreased (0.44 ± 0.09 vs. 0.42 ± 0.10 m, p = 0.02, g = 0.21). Hip sagittal/knee frontal (Δ15.5°, p = 0.04, g = 0.40) and hip frontal/knee frontal (Δ11.0°, p < 0.01, g = 0.44) plane coordination variability increased after SR. Hip sagittal/knee frontal plane coordination variability after SR was associated with increasingly slower PVT response time (r = 0.63, p = 0.03). These findings suggest SR for three days decreased maximal jump performance. SR increased joint coordination variability and was associated with greater impairment in response time. SR leads to deviations from preferred movement patterns, which may have implications for decrements in athlete performance and increased injury risk.  相似文献   

11.
  相似文献   

12.
ABSTRACT

This study examined potential differences between maximally cushioned (MAX) shoes and standard cushioned (STND) shoes during countermovement vertical jump (CMVJ) performance. Twenty-one males (23[2] y; 86.5[15.4] kg; 179.8[6.3] cm) completed eight jumps each in MAX and STND shoes while three-dimensional kinematic and kinetic data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES) were used to compare the following variables: vertical jump displacement, jump time, hip, knee and ankle joint angles at the start of the countermovement, the end of the unloading phase, the end of the eccentric phase, and at takeoff, peak joint power, and the joint contributions to total lower extremity work during the eccentric and concentric phases. The ankle was more dorsiflexed at the end of the countermovement in the MAX shoe (p = 0.002; ES = 0.55) but greater plantarflexion occurred in the STND shoes at takeoff (p = 0.028; ES = 0.56). No other differences were observed. The result of this study suggests that unique ankle joint angular positioning may be employed when wearing MAX versus STND shoes. Since the unique ankle joint positioning did not alter jump performance, potential MAX footwear users might not need to consider the potential for altered CMVJ performance when determining whether to adopt MAX footwear.  相似文献   

13.
To determine the contributions of the motions of the body segments to the vertical ground reaction force (Fz), the joint torques produced by the leg muscles, and the time course of vertical velocity generation during a vertical jump, 15 men were videotaped performing countermovement vertical jumps from a force plate with and without an arm swing. Linear kinematic, Fz, and joint torque data were computed and compared using repeated measures analysis of variance. Maximum jump height was significantly larger in the arm swing jumps compared to the no arm swing jumps and was due to both a higher height of the center of mass (CM) at takeoff (54%) and a larger vertical velocity of the CM at takeoff (46%). The net vertical impulse created during the propulsive phase of the arm swing jumps was greater due to a trend of an increased duration (0.021 s) of the propulsive phase and not to larger average values of Fz. In the arm swing jumps, the arm motion resulted in the arms making a larger maximal contribution to Fz during the middle of the propulsive phase and decreased the negative contribution of the trunk-head and thigh to Fz late in the propulsive phase. Last, the arm swing decreased the extensor torques at the hip (13%), knee (10%), and ankle (10%) early in the propulsive phase but augmented these same extensor torques later in the propulsive phase.  相似文献   

14.
The aim of this study was to quantify clearance mechanics during gait. Seventeen children diagnosed with hemiplegic cerebral palsy underwent a three-dimensional gait analysis evaluation. Dynamic leg lengths were measured from the hip joint center to the heel, to the ankle joint center and to the forefoot throughout the gait cycle. Significant asymmetry was observed during stance, initial and terminal swing phases, where the hemiplegic limb was found shorter by using a paired t-test at 51 sample points (p < .05). The hemiplegic side was restricted in achieving maximal length during terminal swing. The ratio between the maximal dynamic leg length during the stance phase to minimal dynamic leg length during the swing phase was found higher on the non-involved side and lower on the hemiplegic side (p < .05). Quantifying clearance mechanics based on dynamic leg length can provide an additional insight into the analysis of gait patterns and might assist in detecting time of abnormal kinematic deviations.  相似文献   

15.
To investigate the effects of different loads on system and lower-body kinetics during jump squats, 12 resistance-trained men performed jumps under different loading conditions: 0%, 12%, 27%, 42%, 56%, 71%, and 85% of 1-repetition maximum (1-RM). System power output was calculated as the product of the vertical component of the ground reaction force and the vertical velocity of the bar during its ascent. Joint power output was calculated during bar ascent for the hip, knee, and ankle joints, and was also summed across the joints. System power output and joint power at knee and ankle joints were maximized at 0% 1-RM (p < 0.001) and followed the linear trends (p < 0.001) caused by power output decreasing as the load increased. Power output at the hip was maximized at 42% 1-RM (p = 0.016) and followed a quadratic trend (p = 0.030). Summed joint power could be predicted from system power (p < 0.05), while system power could predict power at the knee and ankle joints under some of the loading conditions. Power at the hip could not be predicted from system power. System power during loaded jumps reflects the power at the knee and ankle, while power at the hip does not correspond to system power.  相似文献   

16.

The objectives of this study were to describe the volleyball spiking actions used by players in top‐level competition, and also to examine the interrelationships between upper limb, lower limb and whole body kinematic variables, and post‐impact ball speed in the spiking technique. Two Photosonics Biomechanics 500 cine‐cameras operating at a nominal frame rate of 100 Hz were used to film the spiking actions of 10 male senior international volleyball players at the XVI Universiade (1991 World Student Games). Three‐dimensional object space co‐ordinates of digitized image co‐ordinates were obtained using a DLT algorithm and an array of calibration points in the filmed volume. Relationships between lower limb angular kinematics at take‐off, centre of mass vertical velocity at take‐off and centre of mass vertical displacement (jump height) were examined. Relationships between angular kinematics of the hitting arm and post‐impact ball speed were also determined. The mean (± S.E.) centre of mass vertical velocity at take‐off was 3.59 ± 0.05 m s‐1 and the mean height jumped was 0.62 ± 0.02 m. As expected, a significant correlation was found between the square of the centre of mass vertical velocity at take‐off and jump height (r = 0.78; P <0.01). No significant correlations were found between lower limb angular kinematics and centre of mass vertical velocity at take‐off or jump height. The mean post‐impact ball speed was 27.0 ± 0.9 m s‐1, and this was significantly correlated to maximum right humerus angular velocity (r=0.75; P< 0.01). Trunk rotation angular kinematics and right elbow angular velocity did not correlate significantly with post‐impact ball speed. It was also noted that the majority of players filmed did not fit into any of the spiking categories identified in earlier studies.  相似文献   

17.
ABSTRACT

Distal-to-proximal redistribution of joint work occurs following exhaustive running in recreational but not competitive runners but the influence of a submaximal run on joint work is unknown. The purpose of this study was to assess if a long submaximal run produces a distal-to-proximal redistribution of positive joint work in well-trained runners. Thirteen rearfoot striking male runners (weekly distance: 72.6 ± 21.2 km) completed five running trials while three-dimensional kinematic and ground reaction force data were collected before and after a long submaximal treadmill run (19 ± 6 km). Joint kinetics were calculated from these data and percent contributions of joint work relative to total lower limb joint work were computed. Moderate reductions in absolute negative ankle work (p = 0.045, Cohen’s d = 0.31), peak plantarflexor torque (p = 0.004, d = 0.34) and, peak negative ankle power (p = 0.005, d = 0.32) were observed following the long run. Positive ankle, knee and hip joint work were unchanged (p < 0.05) following the long run. These findings suggest no proximal shift in positive joint work in well-trained runners after a prolonged run. Runner population, running pace, distance, and relative intensity should be considered when examining changes in joint work following prolonged running.  相似文献   

18.
ABSTRACT

Sprint cycling performance depends upon the balance between muscle and drag forces. This study assessed the influence of upper body position on muscle forces and aerodynamics during seated sprint cycling. Thirteen competitive cyclists attended two sessions. The first session was used to determine handlebar positions to achieve pre-determined hip flexion angles (70–110° in 10° increments) using dynamic bicycle fitting. In the second session, full body kinematics and pedal forces were recorded throughout 2x6-s seated sprints at the pre-determined handlebar positions, and frontal plane images were used to determine the projected frontal area. Leg work, joint work, muscle forces and frontal area were compared at three upper body positions, being optimum (maximum leg work), optimal+10° and optimal-10° of hip flexion. Larger hip (p = 0.01–0.02) and reduced knee (p = 0.02–0.03) contribution to leg work were observed at the optimal+10° position without changes at the ankle joint (p = 0.39). No differences were observed in peak muscle forces across the three body positions (p = 0.06–0.48). Frontal area was reduced at optimum+10° of hip flexion when compared to optimum (p = 0.02) and optimum-10° (p < 0.01). These findings suggest that large changes in upper body position can influence aerodynamics and alter contributions from the knee and hip joints, without influencing peak muscle forces.  相似文献   

19.
The aim of this study was to investigate the effectiveness of a caffeine-containing energy drink to enhance physical and match performance in elite badminton players. Sixteen male and elite badminton players (25.4 ± 7.3 year; 71.8 ± 7.9 kg) participated in a double-blind, placebo-controlled and randomised experiment. On two different sessions, badminton players ingested 3 mg of caffeine per kg of body mass in the form of an energy drink or the same drink without caffeine (placebo). After 60 min, participants performed the following tests: handgrip maximal force production, smash jump without and with shuttlecock, squat jump, countermovement jump and the agility T-test. Later, a 45-min simulated badminton match was played. Players’ number of impacts and heart rate was measured during the match. The ingestion of the caffeinated energy drink increased squat jump height (34.5 ± 4.7 vs. 36.4 ± 4.3 cm; P < 0.05), squat jump peak power (P < 0.05), countermovement jump height (37.7 ± 4.5 vs. 39.5 ± 5.1 cm; P < 0.05) and countermovement jump peak power (P < 0.05). In addition, an increased number of total impacts was found during the badminton match (7395 ± 1594 vs. 7707 ± 2033 impacts; P < 0.05). In conclusion, the results show that the use of caffeine-containing energy drink may be an effective nutritional aid to increase jump performance and activity patterns during game in elite badminton players.  相似文献   

20.
It is unclear whether weighted vest (WV) use improves countermovement vertical jump (CMVJ) performance by enhancing stretch-shortening cycle (SSC) function via increased storage and utilisation of elastic strain energy. In is also unknown whether WV use stimulates different responses in men and women. WV effects on energy storage and utilisation during CMVJ were examined in men and women. Nine men (25 ± 3 y; 89.7 ± 18.7 kg; 1.8 ± 0.1 m) and 12 women (24 ± 3 y; 62.7 ± 10.3 kg; 1.6 ± 0.1 m) performed CMVJ wearing a WV with (loaded) and without (unloaded) 10% added mass while kinematic and ground reaction force (GRF) data were obtained. A longer eccentric sub-phase and increased storage of elastic strain energy occurred when loaded. Increased positive joint work occurred during the concentric portion of loaded CMVJ. Women exhibited less positive hip work and greater positive ankle work than men during the unloading and eccentric sub-phases, respectively. Joint work was similar between sexes during the concentric sub-phase, likely due to decreased trunk extension excursion in men when loaded. Women and men employ different SSC strategies during the CMVJ, though the different strategies do not alter energy storage or concentric mechanical output.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号