首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
INTRODUCTION Polypropylene is one of very important syn-thetic resins. In general, people pay more attentionsto the development of catalysts with high isotacticspecificity for propylene polymerization (Wang etal., 1995; Soga and Shiono, 1997). However, withthe development of the various use of polypropyl-ene (Jiang and Wu, 1999; Tiemblo et al., 1999),such as use of atactic polypropylene as an additivefor building top grade highway recently, peoplebegan to make efforts to synthesize…  相似文献   

2.
Novel MgCl2-supported Ziegler-Natta (Z-N) catalysts prepared using a new one-pot ball milling method caneffectively control the amounts of Ti-loading in the catalysts. Complex GPC data on polypropylene synthesized by thesenovel catalysts were analyzed using the method of fitting the molecular weight distribution (MWD) curves with a multipleFlory-Schulz function. It was found that multiple active centers exist in these novel catalysts. Detailed study of the effects ofthe Ti-loadings in the catalysts on the distribution of the active centers showed that the Ti-loadings in the novelMgCl2-supported Z-N catalysts might affect the proportion of each type of active centers; and might be the main factorresponsible for the effect of the Ti-loadings on the microstructure, the molecular weight and molecular weight distributionwidth of the resultant polymer, the catalytic activity and polymerization kinetics.  相似文献   

3.
Study of the SISO mixedH 2/l1 problem for discrete time systems showed that there exists a unique optimal solution which can be approximated within any prescribed missing error bound inl 2 norm with solvable suboptimal solutions and solvable superoptimal solutions. Project supported by the National Natural Science Foundation of China (No. 60174026) and the Scientific Research Foundation for Returned Overseas Chinese Scholars of Zhejiang Province (No. J20020546)  相似文献   

4.
In this study, supported nonmetal （boron） doping TiO2 coating photocatalysts were prepared by chemical vapor deposition （CVD） to enhance the activity under visible light irradiation and avoid the recovering of TiO2. Boron atoms were successfully doped into the lattice of TiO2 through CVD, as evidenced from XPS analysis. B-doped TiO2 coating catalysts showed drastic and strong absorption in the visible light range with a red shift in the band gap transition. This novel B-TiO2 coating photocatalyst showed higher photocatalytic activity in methyl orange degradation under visible light irradiation than that of the pure TiO2 photocatalyst.  相似文献   

5.
α-diketones and β-diketones react with Grignard reagents in the presence of a catalytic amount of Cp2TiCl2 to yield α-ketols and corresponding ketones respectively. Sulfoxides can be deoxygenated by Cp2TiCl2/Al system. The possible mechanisms are also discussed. Project (No. 20072033) supported by the National Natural Science Foundation of China and the Specialized Research Fund for the Doctoral Program of Higher Education Ministry, China  相似文献   

6.
Thermodynamic Optimization of DyCl3 -NaCl System   总被引：2，自引：0，他引：2  
In this paper, the phase diagram of the DyCl3 -NaCl system is optimized and calculated with CALPHAD ( calculation of phase diagram ) technology. A set of thermodynamic functions of compounds Na3 DyCl6, NaDyCl4, and NaDY2 Cl7 have been optimized and calculated based on an interactive computer-assisted analysis. The optimized thermodynamic parameters, calculated phase diagram and experimental phase diagram are thermodynamically serf-consistent.  相似文献   

7.
Nanostructures enhance phonon scattering and improve the figure of merit of thermoelectric materials. Nanosized CoSb3 skutterudite was synthesized by solvothermal methods using CoCl2 and SbCl3 as the precursors. A “two-step” model was suggested for the formation of CoSb3 based on the X-ray diffraction analysis. The first step is the formation of cobalt diantimonide in the earlier stage during the synthesis process. Diantimonide was then combined with antimony atoms to form the skutterudite structured triantimonide, CoSb3, in the later stage of the synthesis process as the second step. The synthesized CoSb3 powders consist of irregular particles with sizes of about 20 nm and sheets of about 80 nm. Project supported by the National Natural Science Foundation of China (No. 50171064) and the Hi-Tech Research and Development Program (863) of China (No. 2002AA302406)  相似文献   

8.
Using SnxTi1-xO2 as carriers, CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 catalysts with different loading amounts of copper oxide (CuO) were prepared by an impregnation method. The catalytic properties of CuO/Sn0.9Ti0.1O2 and CuO/Sn0.7Ti0.3O2 were examined using a microreactor-gas chromatography (GC) NO CO reaction system and the methods of BET (Brun- auer-Emmett-Teller), TG-DTA (themogravimetric and differential thermal analysis), X-ray diffraction (XRD) and H2-temperature programmed reduction (TPR). The results showed that NO conversions of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 were 47.2% and 43.6% respectively, which increased to 95.3% and 90.9% at 6 wt% CuO loading. However, further increase in CuO loading caused a decrease in the catalytic activity. The nitrogen adsorption-desorption isotherm and pore-size distribution curve of Sn0.9Ti0.1O2 and Sn0.7Ti0.3O2 represented type IV of the BDDT (Brunauer, Deming, Deming and Teller) system and a typical mesoporous sample. There were two CuO diffraction peaks (2θ 35.5° and 38.7°), and the diffraction peak areas increased with increasing CuO loading. TPR analysis also detected three peaks (α, β and γ) from the CuO-loaded catalysts, suggesting that the α peak was the reduction of the highly dispersed copper oxide, the β peak was the reduction of the isolated copper oxide, and the γ peak was the reduction of crystal phase copper oxide. In addition, a fourth peak (δ) of the catalysts meant that the SnxTi1-xO2 mixed oxides could be reductive.  相似文献   

9.
The structural characteristics and optical and electrical properties of molecular-beam-epitaxy (MBE) grown ZnS0.8Se0.2 thin films on indium-tin-oxide(ITO) glas substrates were investigated in this work. TheX-ray diffraction (XRD) results indicated that high quality polycrystalline ZnS0.8Se0.2 thin film grown at the optimized temperature had a prefered orientation along the (111) planes. The transmission electron microscopy (TEM) cross-sectional micrograph of the sample showed a well defined columnar structure with lateral crystal dimension in the order of a few hundred angstroms. Ultraviolet (UV) photoresponsivity as high as 0.01 A/W had been demonstrated and for wavelengths longer than 450 nm, the response was down from the peak response by more than 3 orders of magnitude. The thin ZnS0.8Se0.2 photosensor layer, with a wide energy gap and anisotropic electrical property, makes a transmission UV liquid crystal light valve (LCLV) with high resolution feasible. Project supported by the National Natural Science Foundation of China (No. 59910161981) and RGC grant from the Hong Kong Government Grant (No. NSFC/HKUST 35), China  相似文献   

10.
This paper proposes a new approach for multi-objective robust control. The approach extends the standard generalizedl 2 (Gl 2) and generalizedH 2 (GH 2) conditions to a set of new linear matrix inequality (LMI) constraints based on a new stability condition. A technique for variable parameterization is introduced to the multi-objective control problem to preserve the linearity of the synthesis variables. Consequently, the multi-channel multi-objective mixed Gl 2/GH 2 control problem can be solved less conservatively using computationally tractable algorithms developed in the paper. Project supported by the National Natural Science Foundation of China (No. 60374028), and the Scientific Research Foundation for Returned Overseas Chinese Scholars, Ministry of Education (No. [2004]176)  相似文献   

11.
A skutterudite-related antimonide, CoFe3Sb12, was prepared with vacuum melting. XRD analysis showed the material contained Sb, FeSb2, CoSb2 and CoSb3 phases. The electrochemical properties of the ball-milled CoFe3Sb12−10 wt% graphite composite were studied using pure lithium as the reference electrode. A maximal lithium inserting capacity of about 860 mAh/g was obtained in the first cycle. The reversible capacity of the material was about 560 mAh/g in the first cycle and decreased toca. 320 mAh/g and 250 mAh/g after 10 and 20 cycles respectively.Ex-situ XRD analyses showed that the antimonides in the pristine material were decomposed after the first discharge and that antimony was the active element for lithium to insert into the host material. Project supported by the National Natural Foundation of China (No. 59771032) and the RFDP of the Education Ministry of China (No. 20010335045)  相似文献   

12.
A series of new amphiphilic poly[methyl（3,3,3-trifluoropropyl）siloxane]-b-poly（ethylene oxide） （PMTFPS-b-PEO） diblock copolymers with different ratios of hydrophobic segment to hydrophilic segment were prepared by coupling reactions of end-functlonal PMTFPS and PEO homopolymers. Copolymers were shown to be well defined and narrow molecular weight distribution （MWD） （1.07-1.3） by characterizations such as gel permeation chromatography （GPC） and ^1H-nudear magnetic resonance （^1H-NMR）.  相似文献   

13.
Single phase Fe5C2 intermetallic compound was prepared by mechanical alloying method. The phase and crystal structure of sample were analyzed with X-ray differaction spectrum. The decomposing temperature of the Fe5C2 compound is 596.4℃ determined by the DSC curve. It is further shown that the size of nanometer crystal grain is an important condition for carrying out the solid state reaction at room temperature and normal pressure.  相似文献   

14.
A novel metallo-organic chemical vapor deposition (MOCVD) technique has been applied to the preparation of the photocatalytic titanium dioxide supported on activated carbon. The effects of various condition parameters such as carrier gas flow rate, source temperature and deposition temperature on the deposition rate were investigated. The maximum deposition rate of 8.2 mg/(g·h) was obtained under conditions of carrier gas flow rate of 400 ml/min, source temperature of 423 K and deposition temperature of 913 K. The deposition rate followed Arrhenius behavior at temperature of 753 K to 913 K, corresponding to activation energy E a of 51.09 kJ/mol. TiO2 existed only in anatase phase when the deposition temperature was 773 K to 973 K. With increase of deposition temperature from 1073 K to 1273 K, the rutile content sharply increased from 7% to 70%. It was found that a deposition temperature of 773 K and a higher source temperature of 448 K resulted in finely dispersed TiO2 particles, which were mainly in the range of 10–20 nm. Project (No. 90206007) supported by the National Natural Science Foundation of China  相似文献   

15.
Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0°C and 50°C respectively. High copolymerization activity and 1-hexene incorporation were observed at 0°C, with the copolymer formed having random sequence distribution and narrow molecular weight distribution. Ethylene polymerization at 50°C showed high activity, but copolymerization at 50°C showed much lower activity, which decreased sharply with increasing 1-hexene concentration in the monomer feed. Copolymer formed at 50°C showed blocky sequence distribution and broad molecular weight distribution. A mechanism model based on ligand rotation hindered by the propagation chain has been proposed to qualitatively explain the observed phenomena. Project (Nos. 29734144 and 20274037) supported by the National Natural Science Foundation of China  相似文献   

16.
Bentonite is a kind of natural clay with good exchanging ability. By exchanging its interlamellar cations with various soluble cations, such as quaternary ammonium cations and inorganic metal ions, the properties of natural bentonite can be greatly improved. In this study, hexadecyltrimethylammonium bromide （HDTMA）, CaCl2, MgCl2, FeCl3, AlCl3 were used as organic and inorganic pillared materials respectively to produce several kinds of Ca-, Mg-, Fe-, Al-organo pillared bentonites. Sorption of reactive red X-3B on them was studied to determine their potential application as sorbents in wastewater treatment. The results showed that these pillared bentonites had much improved sorption properties, and that the dye solutions＇ pH value had some effect on the performance of these inorgano-organo pillared bentonites. Isotherms of reactive X-3B on these pillared bentonites suggested a Langmuir-type sorption mechanism.  相似文献   

17.
Surface morphologies of Zr52.5 Al10 Ni10 Cu15 Be12.5 bulk metallic glass after being rolled at both a temperature around T9 and near （ Tx - 50） K were investigated with a scanning electron microscopy. Macroscopic and microscopic observation results show that squamae, cracks, steps and wedges exist on the surface when the samples were rolled at temperatures around Ty. However, a smooth and fiat surface appears when the samples were rolled at temperatures near （ Tx - 50） K. These results indicate that the mode of deformation in the supercooled liquid region is a partially homogeneous flow at a temperature around T9, and a fully homogeneous one at temperatures near （ Tx - 50） K. According to the results, it is more feasible to roll the amorphous alloys at temperatures near （ Tx - 50） K to obtain parts with smooth and fiat surface.  相似文献   

18.
Multiresolution image fusion scheme based on fuzzy region feature   总被引：1，自引：0，他引：1  
INTRODUCTION Image fusion can be defined as the process by which several images, or some of their features, are combined together to form different modalities or instruments, and is of great importance in many ap- plications (Hall and Llinas, 1997; Zhou et al., 1998), such as object detection, ATR (Automatic Target Recognition), remote sensing, computer vision, and robotics. Recently some researchers recognized that it seems more meaningful to combine objects/regions rather than pixels…  相似文献   

19.
The superconductor sample had periodic distribution of pinned region (with length ofL p) and unpinned region (with length ofL−L p) along the driving force direction. Numerical study on the influence of the distribution of pinning centers on pinning of the two-dimensional vortex system showed that the critical depinning forceF c, beyond which the vortex system begins to depin, increases with increase ofL p, indicating that the homogeneity of pinning centers helps to enhance the critical electric current of a superconductor. We found that the critical depinning forceF c depends logarithmically onL/L p. Project supported by the Ministry of Science and Technology of China (NKBRSF-G19990646) and Zhejiang Proviace Foundation (199031).  相似文献   

20.
To evaluate the public health risk of exposure to microcystins in fish food in China, the distribution pattem of microcystin-LR and microcystin-RR in various organs （liver, intestine, kidney, muscle and lipid） of the dominant freshwater phytoplanktivorous fish Hypophthalmichthys molitrix in Hangzhou, China＇s Tiesha River was investigated with the method of HPLC-ESI-MS analysis. The distribution of microcystins was different in the fish organs and the major total microcystins （microcystin-LR and microcystin-RR） were present in the intestines （6.49 μg/g fresh weight）, followed by the livers （4.52 μg/g fresh weight） and the muscles （2.86 μg/g fresh weight）. Microcystins were detected in kidneys （1.35 μg/g fresh weight）, but not detected in lipid. The results suggested that the mean daily intake from fish was 0.03 μg/kg body weight which was very close to the recommended WHO tolerable daily intake （TDI） level of 0.04μg/kg body weight per day, and local people were wamed they may have health risk if they consumed fish from the river.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号