共查询到20条相似文献，搜索用时 31 毫秒
1.
This paper investigates the problem of sliding mode control (SMC) for discrete-time two-dimensional (2-D) systems subject to external disturbances. Given a 2-D Fornasini–Marchesini (FM) local state space model, attention is focused on designing the 2-D sliding surface and sliding mode controller, which guarantees the resultant closed-loop system to be asymptotically stable. Particularly, this problem is solved using the model transformation based method. First of all, sufficient conditions are formulated for the existence of a linear sliding surface guaranteeing the asymptotic stability of the equivalent sliding mode dynamics. Based on this, a sliding mode controller is synthesized to ensure that the associated 2-D FM system satisfies the reaching condition. The efficiency of the proposed 2-D SMC law design is shown by a numerical example. This paper extends the idea of model transformation to the 2-D systems and solves the SMC problem of a more general 2-D model in FM type for the first time. 相似文献
2.
This paper is concerned with integrated event-triggered fault estimation (FE) and sliding mode fault-tolerant control (FTC) for a class of discrete-time Lipschtiz nonlinear networked control systems (NCSs) subject to actuator fault and disturbance. First, an event-triggered fault/state observer is designed to estimate the system state and actuator fault simultaneously. And then, a discrete-time sliding surface is constructed in state-estimation space. By the use of a reformulated Lipschitz property and delay system analysis method, the sliding mode dynamics and state/fault error dynamics are converted into a unified linear parameter varying (LPV) networked system model by taking into account the event-triggered scheme, actuator fault, external disturbance and network-induced delay. Based on this model and with the aid of Lyapunov–Krasovskii functional method, a delay-dependent sufficient condition is derived to guarantee the stability of the resulting closed-loop system with prescribed H∞ performance. Furthermore, an observed-based sliding mode FTC law is synthesized to make sure the reachability of the sliding surface. Finally, simulation results are conducted to verify the effectiveness of the proposed method. 相似文献
3.
《Journal of The Franklin Institute》2023,360(11):7325-7356
This paper focuses on the distributed fuzzy learning sliding mode cooperative control issue for non-affine nonlinear multi-missile guidance systems. The dynamics of each follower is non-affine form with unknown lumped factor. To estimate the unknown lumped factor, a generalized fuzzy hyperbolic model (GFHM) based prescribed performance observer (PPO) is proposed. Different from the traditional disturbance observers, a residual set of error transient behavior is incorporated additionally so that the peak phenomenon can be avoided. Meanwhile, an auxiliary system is employed to convert the system of each follower to augmented affine form. Then, a distributed fuzzy learning sliding mode cooperative control approach is designed which consists of two parts. The adaptive sliding mode control (SMC) part is designed to force the states to move along the predefined integral sliding surface. For the equivalent sliding dynamics, the distributed optimal control part with GFHM is developed to minimize the cooperative performance function. Thus, the stability and the optimality of the closed-loop system are guaranteed synchronously. Finally, all signals of closed-loop system are rigorously proved bounded and the multi-missile cooperative guidance scenario is applied to verify the effectiveness of proposed method. 相似文献
4.
Robustness to unmatched parametric uncertainty is prime requirement of roll control algorithm, especially when it is modelled in discrete time domain and implemented through on-board processor. Sliding mode control is a well established nonlinear control technique, which ensures a robust performance in presence of matched uncertainties and disturbances. In case of the discrete version of sliding mode control, due to finite operational sampling frequency, the system trajectories cannot be forced to slide on the switching manifold. The trajectories remain confined to certain domain around the sliding surface and this is known as Quasi Sliding Mode (QSM) motion. The bound of QSM decides the accuracy and performance of the discrete version of sliding mode. By design, the discrete-time sliding modes are robust to the matched bounded perturbations, however, unmatched perturbations directly affect the boundary layer width and hence the performance of the system. In the present paper, discrete time Lyapunov inequality based sliding hyperplane is designed, which enables robustness to unmatched perturbations arising due to uncertain system matrix A. Further, the requirement of full state-vector for the design of control and sliding surface is met through the multi-rate output feedback (MROF). This control strategy is then demonstrated with application to roll position control of missile with a bandwidth limited actuator. 相似文献
5.
In this paper, an observer-based sliding mode control (SMC) problem is investigated for a class of uncertain delta operator systems with nonlinear exogenous disturbance. A novel robust stability condition is obtained for a sliding mode dynamics by using Lyapunov theory in delta domain. Based on a designed sliding mode observer, a sliding mode controller is synthesized by employing SMC theory combined with reaching law technique. The robust asymptotical stability problem is also discussed for the closed-loop system composed of the observer dynamics and the state estimation error dynamics. Furthermore, the reachability of sliding surfaces is also investigated in state-estimate space and estimation error space, respectively. Finally, a numerical example is given to illustrate the feasibility and effectiveness of the developed method. 相似文献
6.
Sliding mode control for uncertain discrete-time systems with Markovian jumping parameters and mixed delays 总被引：1，自引：0，他引：1
This paper is concerned with the robust sliding mode control (SMC) problem for a class of uncertain discrete-time Markovian jump systems with mixed delays. The mixed delays consist of both the discrete time-varying delays and the infinite distributed delays. The purpose of the addressed problem is to design a sliding mode controller such that, in the simultaneous presence of parameter uncertainties, Markovian jumping parameters and mixed time-delays, the state trajectories are driven onto the pre-defined sliding surface and the resulting sliding mode dynamics is stochastically stable in the mean-square sense. A discrete-time sliding surface is firstly constructed and an SMC law is synthesized to ensure the reaching condition. Moreover, by constructing a new Lyapunov–Krasovskii functional and employing the delay-fractioning approach, a sufficient condition is established to guarantee the stochastic stability of the sliding mode dynamics. Such a condition is characterized in terms of a set of matrix inequalities that can be easily solved by using the semi-definite programming method. A simulation example is given to illustrate the effectiveness and feasibility of the proposed design scheme. 相似文献
7.
Ali Karami-Mollaee Hamed Tirandaz Oscar Barambones 《Journal of The Franklin Institute》2019,356(8):4577-4600
Mismatched uncertainty and chattering appear as two challenges in sliding mode control. To overcome the problem of mismatched uncertainty, multiple sliding surfaces with virtual inputs are proposed. Accordingly, we have proposed two new methods based on designed neural observer: sliding mode control (SMC) and dynamic sliding mode control (DSMC) methods. Although, the proposed SMC can significantly cope with the mismatched uncertainties, but it suffers from chattering phenomenon. The chattering problem can be removed in DSMC, because an integrator is placed before the system. This results in increased number of the system states. This new state can be identified with the proposed neural observer. Note that in both proposed approaches, the robust performance (invariance property) of system is reserved, even in the presence of mismatch uncertainties. Then, to have a valid comparison the proposed DSMC is also designed using loop transfer recovery observer (LTRO). This comparison shows the good performance of the DSMC based neural networks. Moreover, the upper bound of uncertainties is not used in SMC and DSMC controllers and also in the neural observer and LTRO, which is important in practical implementation. Finally, comparing the equations, one can see the simplicity of DSMC in concept and also in realization. 相似文献
8.
Diyi Chen Cong Ding Younghae Do Xiaoyi Ma Hua Zhao Yichen Wang 《Journal of The Franklin Institute》2014
In this paper, we introduce a novel model of a hydro-turbine system with the effect of surge tank based on state-space equations to study the nonlinear dynamical behaviors of the hydro-turbine system. The critical points of Hopf bifurcation and the relationship of the stability satisfying with the adjustment coefficients are obtained from direct algebraic criterion. Furthermore, the bifurcation diagrams and Lyapunov exponents are presented and analyzed. The dynamical behaviors of the points with representative characteristics are identified and studied in detail. Both theoretical analysis and numerical simulations show that chaotic oscillations, which cannot stabilize the system, may occur with the changes of adjustment coefficients. To control the undesirable chaotic behaviors in this system, fuzzy sliding mode governor based on the sliding mode control (SMC) and the fuzzy logic are designed, and considering the bounded disturbance. Finally, series of numerical simulations are presented to verify the effectiveness of the proposed governor, which prove that the hydro-turbine governing system can maintain a better operation station under the designed governor. 相似文献
9.
In this paper, the observer-based sliding mode control (SMC) problem is investigated for a class of uncertain nonlinear neutral delay systems. A new robust stability condition is proposed first for the sliding mode dynamics, then a sliding mode observer is designed, based on which an observer-based controller is synthesized by using the SMC theory combined with the reaching law technique. Then, a sufficient condition of the asymptotic stability is proposed in terms of linear matrix inequality (LMI) for the overall closed-loop system composed of the observer dynamics and the state estimation error dynamics. Furthermore, the reachability problem is also discussed. It is shown that the proposed SMC scheme guarantees the reachability of the sliding surfaces defined in both the state estimate space and the state estimation error space, respectively. Finally, a numerical example is given to illustrate the feasibility of the proposed design scheme. 相似文献
10.
In consideration of target angular velocity uncertainty and external disturbance, a modified dynamic output feedback sliding mode control (DOFSMC) method is proposed for spacecraft autonomous hovering system without velocity measurements. As a stepping-stone, an additional dynamic compensator is introduced into the design of sliding surface, then an augmented system is reconstructed with the system uncertainty and external disturbance. Based on the linear matrix inequality (LMI), a sufficient condition is given, which guarantees the disturbance attenuation performance of sliding mode dynamics. By introducing an auxiliary variable, a modified version of adaptive sliding mode control (ASMC) law is designed, and the finite-time stability of sliding variable is established by the Lyapunov stability theory. Compared with other results, the proposed method is less conservative and can decrease the generated control input force significantly. Finally, two simulation examples are performed to validate the effectiveness of the proposed method. 相似文献
11.
Gabriele Perozzi Denis Efimov Jean-Marc Biannic Laurent Planckaert 《Journal of The Franklin Institute》2018,355(12):4809-4838
The problem of position tracking of a mini drone subject to wind perturbations is investigated. The solution is based on a detailed unmanned aerial vehicle (UAV) model, with aerodynamic coefficients and external disturbance components, which is introduced in order to better represent the impact of the wind field. Then, upper bounds of wind-induced disturbances are characterized, which allow a sliding mode control (SMC) technique to be applied with guaranteed convergence properties. The peculiarity of the considered case is that the disturbance upper bounds depend on the control amplitude itself (i.e. the system is nonlinear in control), which leads to a new procedure for the control tuning presented in the paper. The last part of the paper is dedicated to the analysis and reduction of chattering effects, as well as investigation of rotor dynamics issues. Conventional SMC with constant gains, proposed first order SMC, and proposed quasi-continuous SMC are compared. Nonlinear UAV simulator, validated through in-door experiments, is used to demonstrate the effectiveness of the proposed controls. 相似文献
12.
To stabilize both amplitude and frequency of the second-order harmonic oscillator double-fold sliding mode control is employed. The first, integral sliding mode control, is used to compensate for the disturbance/uncertainty, which is unmatched by the second control. The second sliding mode control is designed to achieve the stabilization of the harmonic oscillator system while the system is in the integral sliding mode. The first (integral) and second sliding mode controls are implemented in both formats: traditional sliding mode control that requires high-frequency oscillating control action and second-order sliding mode (super-twisting) control that is continuous and provides for the higher accuracy of stabilization. It is shown that the output of the double-fold sliding mode controlled second-order harmonic oscillator is robust to bounded disturbances and model parameter uncertainties. Computer simulations are performed to manifest the theoretical analysis. 相似文献
13.
Jorge Rivera Florentino Chavira Alexander Loukianov Susana Ortega Juan J. Raygoza 《Journal of The Franklin Institute》2014
This work deals with the discrete-time modeling of a boost DC-to-DC power converter by means of a discrete Lagrangian formulation based on the midpoint rule integration method. Then in the basis of this model, a discrete-time sliding mode regulator is designed in order to force the boost circuit to track a DC-biased sinusoidal signal. Simulations and experimental tests are carried on where the great performance of the proposed methodology is verified. 相似文献
14.
15.
Sliding mode control (SMC) is among the popular approaches for control of systems, especially for unknown nonlinear systems. However, the chattering in SMC is generally a problem that needs to be resolved for better control. A time-varying method is proposed for determining the sliding gain function in the SMC. Two alternative tuning algorithms are proposed for reducing the sliding gain function for systems. The first algorithm is for systems with no noise and disturbance but with or without unmodeled dynamics. The second algorithm is for systems with noise, disturbance, unmodeled dynamics, or any combination of them. Compared with the state-dependent, equivalent-control-dependent, and hysteresis loop methods, the proposed algorithms are more straightforward and easy to implement. The performance of the algorithms is evaluated for five different cases. A 90% to 95% reduction of chattering is achieved for the first algorithm used for systems with sensor dynamics only. By using the second algorithm, the chattering is reduced by 70% to 90% for systems with noise and/or disturbance, and by 25% to 50% for systems with a combination of disturbance, noise, and unmodeled dynamics. 相似文献
16.
Zhihuan Chen Xiaohui Yuan Xiaotao Wu Yanbin Yuan Xiaohui Lei 《Journal of The Franklin Institute》2019,356(15):8366-8387
This paper investigates the frequency change problem of hydraulic turbine regulating system based on terminal sliding mode control method. By introducing a novel terminal sliding mode surface, a global fast terminal sliding mode controller is designed for the closed loop. This controller eliminates the slow convergence problem which arises in the terminal sliding mode control when the error signal is not near the equilibrium. Meanwhile, following consideration of the error caused by the actuator dead zone, an adaptive RBF estimator based on sliding mode surface is proposed. Through the dead zone error estimation for feed-forward compensation, the composite terminal sliding mode controller has been verified to possess an excellent performance without sacrificing disturbance rejection robustness and stability. Simulations have been carried out to validate the superiority of our proposed methods in comparison with other two other kinds of sliding mode control methods and the commonly used PID and FOPID controller. It is shown that the simulation results are in good agreement with the theoretical analysis. 相似文献
17.
Fanbiao Li Xiuying Cao Can Zhou Chunhua Yang 《Journal of The Franklin Institute》2021,358(9):4687-4704
In this paper, an asynchronous sliding mode control design method based on the event-triggered strategy is proposed for the continuous stirred tank reactor (CSTR) under external disturbance. Firstly, with the purpose of appropriately modeling the multi-mode switching phenomenon in the CSTR caused by the fluctuation of temperature and concentration, the Markov process is applied. Secondly, the asynchronous switching characteristics are introduced to describe mismatch between the controller and the system, which caused by some factors such as signal transmission delay and packet dropout. In order to effectively estimate the system states that cannot be measured in real time, an observer based on the event-triggered strategy is proposed, which also can reduce the computational cost. In addition, a sliding mode controller is designed to ensure the dynamic stability and the sliding dynamics is reachable in a finite time. Finally, the effectiveness of the proposed method is verified by simulation experiments. 相似文献
18.
Finite-time inter-layer projective synchronization (FIPS) of Caputo fractional-order two-layer networks (FTN) based on sliding mode control (SMC) technique is investigated in this article. Firstly, in order to realize the FIPS of FTN, a fractional-order integral sliding mode surface (SMS) is established. Then, through the theory of SMC, we design a sliding mode controller (SMCr) to ensure the appearance of sliding mode motion. According to the fractional Lyapunov direct method, the trajectories of the system are driven to the proposed SMS, and some novel sufficient conditions for FIPS of FTN are derived. Furthermore, as two special cases of FIPS, finite-time inter-layer synchronization and finite-time inter-layer anti-synchronization for the FTN are studied. Finally, this paper takes the fractional-order chaotic Lü’s system and the fractional-order chaotic Chen’s system as the isolated node of the first layer system and the second layer system, respectively. And the numerical simulations are given to demonstrate the feasibility and validity of the proposed theoretical results. 相似文献
19.
This paper studies the problem of observer based fast nonsingular terminal sliding mode control schemes for nonlinear non-affine systems with actuator faults, unknown states, and external disturbances. A hyperbolic tangent function based extended state observer is considered to estimate unknown states, which enhances robustness by estimating external disturbance. Then, Taylor series expansion is employed for the non-affine nonlinear system with actuator faults, which transforms it to an affine form system to simplify disturbance observer and controller design. A finite time disturbance observer is designed to address unknown compound disturbances, which includes external disturbances and system uncertainties. A fast nonsingular terminal sliding mode with exponential function sliding mode is proposed to address output tracking. Simulation results show the proposed scheme is effective. 相似文献
20.
《Journal of The Franklin Institute》2019,356(13):7112-7143
This paper addresses the problem of robust integrated fault estimation (FE) and fault-tolerant control (FTC) for a class of discrete-time networked Takagi–Sugeno (T–S) fuzzy systems with two-channel event-triggered schemes, input quantization and incomplete measurements. The incomplete information under consideration includes randomly occurring sensor saturation and randomly occurring quantization. In order to save the limited networked resources, this paper firstly proposed a novel dynamic event-triggered scheme on the sensor side and a static one on the controller side. Secondly, an event-triggered FE observer for the T–S fuzzy model is designed to estimate actuator faults and system states, simultaneously. Then, a specified discrete sliding surface in the state-estimation space is constructed. By using time-delay analysis technique and considering the effects of event-triggered scheme, quantization, networked conditions, actuator fault and external disturbance, the sliding mode dynamics and error dynamics are unified into a new networked time-delay model. Based on this model, sufficient conditions are established such that the resulting augmented fuzzy system is stochastically stable with a prescribed H∞ performance level with a single-step linear matrix inequality (LMI) formulation. Furthermore, an observer-based sliding mode controller for reaching motion is synthesized to guarantee the reachability of the sliding surface. Finally, a single-link flexible manipulator example is present to illustrate the effectiveness of the proposed method. 相似文献