首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献,搜索用时 140 毫秒
1.
通过对真空断路器上采用过的几种操动机构性能对比,突出了永磁操动机构的特点和技术先进性。详析了永磁操动机构的结构、动作原理及真空断路器电气控制系统的工作原理,论证了永磁操动机构在真空断路器上的应用将对真空断路器向免维护方向发展起到非常重要的作用。  相似文献   

2.
对真空断路器调试工艺方法、试验内容进行了探讨,并对真空断路器状态检测项目和内容进行了分析,以便及时发现隐患并消除缺陷,提高运行可靠性。  相似文献   

3.
分析了ZN7-10C真空断路器在运行中出现的故障现象及存在的问题,提出了真空断路器维护新措施及检修方法,解决了真空断路器在运行过程中出现的新问题,从而提高了其运行可靠性,保证了机组及系统的安全、稳定。  相似文献   

4.
随着电力系统的快速发展,10kV级真空断路器在中国有大量生产和使用。维修人员提高对真空断路器的认识,加强保养,使其安全运行,已成为一个迫切的问题。以zw27—12作为一个例子,简要叙述了有关的原则,真空断路器和维修。  相似文献   

5.
邢丽彬  高晓娟 《林区教学》2008,(11):110-111
讨论真空断路器的概况、真空断路器存在的问题以及在使用中的建议。  相似文献   

6.
分析总结了城乡电网改造后被广泛采用的真空断路器的运行维护问题,并给出了改进建议。提出了在农村电网中真空断路器运行维护中应注意的一些具体问题,为农村电网运行人员维护相关设备提供了有益的参考。  相似文献   

7.
目前在铁路10KV电力系统中,有不少10KV少油断路器已更换为真空断路器。真空断路器与少油断路器相比,具有结构简单、适于频繁操作、开断能力强、寿命长,检修维护工作量小、运行可靠性高等优点,近年来已逐步取代少油断路器。在真空断路器的运行维护过程中,应注意以下几个问题:  相似文献   

8.
介绍了高压真空断路器异常运行状态下的检测及其处理方法。  相似文献   

9.
户内真空断路器在使用中要注意的问题。  相似文献   

10.
文章对真空断路器的结构特征进行了简要的分析描述,对其机械特性进行了理论的分析计算;同时对弹簧操作机构在无机械故障下的正常分合闸速度特征曲线的理论值和实测值进行了对比,这样的对比有利于快速分析机械故障点,对断路器及其操作机构的故障诊断和维护维修提供了理论支持,从而提高了断路器的可靠性,使配电网络更加安全、稳定.  相似文献   

11.
对真空断路器断开空载变压器的过电压原理进行了阐述 ,对过电压的限制措施进行了分析 ,并详细分析了两种常用的保护装置。  相似文献   

12.
Undesirable repulsive force between contact members due to both a current path shrink near a real contact area and/or so-called pinch effect is particularly onerous for power switch applications, and results in either contact floating or bouncing which are associated with an electric arc following contact welding. This problem is of great importance for any circuit breaker especially for compact low voltage vacuum circuit breakers. To avoid contact floating at closure and during any inrush current under short circuit conditions, the electrodynamic repulsive force can be employed successfully if we use a special compensation system flexibly combined with the contact itself. However to select and design the compensation system properly, its efficiency has to be known. This paper presents an approach to obtain the electrodynamic force value depending on different shaped (rectangular, square, circle and arch) copper plates used in the compensator by using ANSYS for current values 40 kA RMS. Curve-fitting was done according to the calculating results, the optimization designing of compensation unit is based on them.  相似文献   

13.
真空断路器的参数采集接口电路是为主系统需要采集机械信号参量的重要的电接口。本文提出了一种设计接口电路的方法。通过这种方案设计的接口电路,将感兴趣的机械参量转换成电信号,便于为系统采集和处理。  相似文献   

14.
目前在10kV及以下电压等级配电网络中,真空断路器已逐步取代油断路。在无油化改造过程中发挥了积极作用。但使用过程中也应注意几个问题,使它的优越性得到充分发挥。  相似文献   

15.
1 Introduction [1-3]The permanent magnetic actuator (PMA) technology first showed up in 1990s. It adopts a new working theory and a novel structure. With the combination of electrical magnetism and permanent magnetism, it can realize all functions of a br…  相似文献   

16.
真空断路弧后延时重击穿现象可能引起危险的过电压,破坏断路器的稳定运行。文中研究探讨了产生此现象的机理和应采取的对策。  相似文献   

17.
基于虚拟仪器技术的万能式断路器检测系统设计   总被引:1,自引:0,他引:1  
智能型万能式断路器性能参数检测是产品研制、调试、生产、出厂检验的重要环节.本文设计了一套以工业控制计算机为核心,配置高精度数据采集卡和信号调理电路等硬件,采用先进的虚拟仪器技术——LabVIEW 7 Express软件开发平台自行开发数据采集、分析、处理软件,通过PCI标准总线组成的高度集成的自动检测系统,可满足CW2(P型)系列智能型万能式断路器产品的出厂检验要求.介绍了系统总体方案设计和软件的实现.经实际应用表明,该系统具有测试精度高、抗干扰能力强、检测效率高、操作简单等优点.  相似文献   

18.
This paper outlines the significance of enhancing the instantaneous protection reliability of low voltage circuit breakers and describes their main failure modes. The instantaneous failure mechanism of low voltage circuit breakers was analyzed so that measures to improve instantaneous protection reliability can be determined. Furthermore, the theory of the instantaneous characteristics calibration device for low voltage circuit breakers and the method of eliminating the non-periodic component of test current are given in detail. Finally, the test results are presented.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号