首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 360 毫秒
1.
INTRODUCTION With the development of modern electronics,there is a growing trend of designing a low-voltagehigh precision current reference in many mixed-signaland analog circuits such as data converters (Mehr andSinger, 2000; Oh et al., 2004), oscillators and PLLs(Razavi, 2001; Banba and Shiga, 1999). Low-costreasons need the reference to be realized in simplestandard CMOS logic process technology, withoutresorting to the use of BiCMOS process and specialdevices such as floating-g…  相似文献   

2.
BaFe12O19 powders with nanocrystaUine sizes were produced by sol-gel auto-combustion method. The precursors were prepared under the molar ratios of citric acid to the metal nitrate of 0.5, 1.0 and 1.5. Appropriate ethylene diamine (C2H8N2) was added in order to adjust pH of 7. The ions distribution of citric acid at different pH explains the effect of citric acid in the starting solution. The XRD patterns of the as-burnt powders and annealing powders show different phases for different citric acid content. In addition, the lattice constants (a, c) derived from X-ray diffraction pattern were changed from 0.58881 nm to 0.58997 nm and 2.32057 nm to 2.32296 nm respectively. The data from VSM indicated that the powder with high citric acid content took on good magnetic properties. Pure single BaFe12O19 of the specific maximum magnetization M(1 T)≈ 49.73 Am^2/kg, the specific remanent magnetization Mr ≈ 30.77 Am^2/kg and the coercive force He≈ 467 kA/m was produced when the molar ratios of citric acid to the metal nitrate was 1.5.  相似文献   

3.
The boost type power supplies are widely used in portable consumer electronics to step up the input voltage to adapt for the high voltage applications like light-emitting diode (LED) driving and liquid crystal display (LCD) biasing. In these applications, a regulator with small volume, fewer external components and high efficiency is highly desired. This paper proposes a projected off- and on-time boost control scheme, based on which a monolithic IC with an on-chip VDMOS with 0.2 Ω on-state resistance RDS-ON was implemented in 1.5 μm bipolar-CMOS-DMOS (BCD) process. A 12 V, 0.3 A boost regulator prototype is presented as well. With projected off-time and modulated on-time in continuous conduction mode (CCM), a quasi fixed frequency, which is preferred for ripple control, is realized. With projected on-time and modulated off-time in discontinuous conduction mode (DCM), pulse frequency modulation (PFM) operation, which is beneficial to light load efficiency improvement, is achieved without extra control circuitry. Measurement results show that an efficiency of 3% higher than that of a conventional method under 0.5 W output is achieved while a step load transient response comparable to that of current mode control is maintained as well.  相似文献   

4.
介绍了DDS芯片AD9852和FPGA(现场可编程门阵列)相结合的全数字方法,直接在70MHz中频上实现多制式信号调制。通过FPGA编程实现对DDS所产生的多种不同调制信号的控制,从而实现远距传输信息的目的。  相似文献   

5.
Aluminum nitride (AlN) thin films with high c-axis orientation have been prepared on a glass substrate with an Al bottom electrode by radio frequency (RF) reactive magnetron sputtering. Based on the analysis of Berg's hysteresis model, the improved sputtering system is realized without a hysteresis effect. A new control method for rapidly depositing highly c-axis oriented AlN thin films is proposed. The N2 concentration could be controlled by observing the changes in cathode voltage, to realize the optimum processing condition where the target could be fixed stably in the transition region, and both stoichiometric film composition and a high deposition rate could be obtained. Under a 500 W RF power of a target with a 6 cm diameter, a substrate temperature of 450 ℃, a target-substrate distance of 60 mm and a N2 concentration of 25%, AlN thin film with preferential (002) orientation was deposited at 2.3 μm/h which is a much higher rate than previously achieved. Through X-ray diffraction (XRD) analysis, the full width at half maximum (FWHM) of AlN (002) was shown to be about 0.28°, which shows the good crystallinity and crystal orientation of AlN thin film. With other parameters held constant, any increase or decrease in N2 concentration results in an increase in the FWHM of AlN.  相似文献   

6.
The amorphous Fe67.5 alloy particles have been prepared by mechanical alloying(MA) process of elemental powders.The crystallization is observed at temperature around 405℃ by means of differential thermal analyzer,It is found that the coercivity Hc and the effective magnetic anisotropy value of amorphous phase are not far from that of crystal phase.The magnetization behavior of amorphous and nanocrystalline samples prepared by mechanical alloying and milling process are quite similar,they obey 1/H law at middle-high field and 1/H^2 at higher field.The 1/H field dependence is attributed to a large number of dislocations created during MA process.The studies on the 1/H^2 field dependence reveals that magnetization of Fe-Ni ultrafine particles are governed predominantly by internal stress fields induced by MA process.  相似文献   

7.
Using composite field arithmetic in Galois field can result in the compact Rijndael S-Box. However, the power con- sumption of this solution is too large to be used in resource-limited embedded systems. A full-custom hardware implementation of composite field S-Box is proposed for these targeted domains in this paper. The minimization of power consumption is implemented by optimizing the architecture of the composite field S-Box and using the pass transmission gate (PTG) to realize the logic functions of S-Box. Power simulations were performed using the netlist extracted from the layout. HSPICE simulation results indicated that the proposed S-Box achieves low power consumption of about 130 μW at 10 MHz using 0.25 μm/2.5 V technology, while the consumptions of the positive polarity reed-muller (PPRM) based S-Box and composite field S-Box based on the conventional CMOS logic style are about 240 μW and 420 μW, respectively. The simulations also showed that the presented S-Box obtains better low-voltage operating property, which is clearly relevant for applications like sensor nodes, smart cards and radio frequency identification (RFID) tags.  相似文献   

8.
介绍了一种应用于DRM/DAB频率综合器的宽带低相位噪声低功耗的CMOS压控振荡器.为了获得宽工作频带和大调谐范围,在LC谐振腔里并联一个开关控制的电容阵列.所设计的压控振荡器应用中芯国际的0.18μm RF CMOS工艺进行了流片实现.包括测试驱动电路和焊盘,整个芯片面积为750μm×560μm.测试结果表明,该压控振荡器的调谐范围为44.6%,振荡频率范围为2.27~3.57GHz.其相位噪声在频偏为1MHz时为-122.22dBc/Hz.在1.8V的电源电压下,其核心的功耗为6.16mW.  相似文献   

9.
10.
11.
INTRODUCTION Due to increasing demand for higher perform- ance, as well as for higher safety and reliability standards, the model-based approaches to fault de- tection and isolation (FDI) for dynamic systems have received more and more attention during the last two decades (Chen and Patton, 1999; Chen and Saif, 2006 Frank and Ding, 1997; Gao and Wang, 2006; Jiang and Zhou, 2005; Zhou et al., 1998). Among these model-based approaches, the most common way is the observer-based approach…  相似文献   

12.
The vapor-liquid equilibrium(VLE) properties for the binary and ternary mixtures of CH4,C2H4 and isoC4H10 are of great importance in the recovery of ethylene from mixture containing CH4 and C2H4 with iso-C4H10 as solvent.Hence,Gibbs ensemble Monte Carlo(GEMC) simulations were used to estimate vapor-liquid equilibrium for the binary and ternary mixtures of CH4,C2H4 and iso-C4H10 with the united atom potential NERD model.The selected simulation conditions are based on the experiment in the literature.The results of this work were shown to be in satisfactory agreement with available experimental data and predictions of Peng-Robinson equation of state.The structure of simulated liquid phase is also characterized by radial distribution function(RDF),which contributes to further understanding of the VLE curve of these systems.RDF is not sensitive to the pressure and temperature range.With the increase of pressure or the decrease of temperature,the molecules tend to gather together.  相似文献   

13.
提出一种基于MTK手机平台的RFID射频手持设备的设计方案.系统以MTK手机平台为主体,外部扩展RFID射频模块,MTK手机平台以MT6255为核心处理单元;RFID模块采用STC89LE516RD作为独立CPU控制,使用MFRC500对射频卡进行读写,通过UART接口将数据送入MTK平台处理.本方案采用外部扩展模块的设计思想,对RFID模块电路及其接口进行了硬件电路设计,对RFID模块和MTK手机平台进行了程序设计,可以完成对射频卡的读写,可对射频卡上的数据进行重置、加减等处理,具有一定的应用价值.  相似文献   

14.
RFID隶属于非接触的自动识别技术。RFID系统在工业和商业中得到广泛的应用,系统基本原理是利用射频信号和空间电磁场耦合传输特性,来实现对监控物体的信息交换及自动识别。系统一般包括两部分,即电子标签(Tag)和阅读器(Reader)。标签激活距离是衡量一个RFID系统性能的重要因素。该文详细解释了RFID工作原理和推导出影响标签激活距离的参数。研究对象是高频(HRF)13.56MHz的RFID系统。  相似文献   

15.
Hydrogen dielectric-barrier discharge (H2-DBD) plasma was successfully used to prepare carbon nanotubes (CNTs)-supported cobalt (Co) catalyst. The H2-DBD plasma treatment simultaneously decomposed and reduced the cobalt precursor at a lower temperature and in a shorter time than the conventional method (calcination and hydrogen reduction). It is considered that the H2-DBD plasma method can remarkably decrease the amount of energy input compared to traditional methods used to prepare the Co-based catalyst in Fischer–Tropsch synthesis (FTS). Results showed that the Co catalyst prepared by H2-DBD plasma had an equivalent catalytic performance for FTS as that prepared using the conventional method in calcination and hydrogen reduction, thereby determining that H2-DBD plasma was an effective alternative treatment for preparing the Co/CNTs catalyst for FTS. This technology will provide a new strategy for preparing catalysts in other catalysis processes.  相似文献   

16.
This paper proposes a new approach for multi-objective robust control. The approach extends the standard generalizedl 2 (Gl 2) and generalizedH 2 (GH 2) conditions to a set of new linear matrix inequality (LMI) constraints based on a new stability condition. A technique for variable parameterization is introduced to the multi-objective control problem to preserve the linearity of the synthesis variables. Consequently, the multi-channel multi-objective mixed Gl 2/GH 2 control problem can be solved less conservatively using computationally tractable algorithms developed in the paper. Project supported by the National Natural Science Foundation of China (No. 60374028), and the Scientific Research Foundation for Returned Overseas Chinese Scholars, Ministry of Education (No. [2004]176)  相似文献   

17.
Chemically processed Nb-doped SrTiO3 films and properties   总被引:1,自引:0,他引:1  
Homogeneous, crack-free SrNbxTi1−x O3 thin films on (110) silicon substrates were successfully fabricated by sol-gel processing. The optimum route and conditions were systematically investigated. Sr(OAc)2 glacial acctic acid solution, after being refluxed and reacted with tartrate, formed Sr(OAc)2(C4H6O6)2; Ti(OBu)4 formed Ti(OAc)4−x (AcAc)x after having the ligand partially exchanged with AcAc, while Nb(OC2H5)5 formed (OAc)2Nb(AcAc) (C4H6O6) by exchanging of ligand in glacial acetic acid with (CH3CO)2O. All the metal species after undergoing partial hydrolysis and polymerization with hydroxyl or oxygen, formed SrNbxTi1−x O13 cluster sol. Methyl cellulose (MCL) caused SrNbxTi1−x O3 sol to have polymeric structure and easily form films. SrNbxTi1−x O3 films with perovskite were subsequently formed after being annealed at 650∼750 °C for 60 min in 25% N2+75% H2 (volume ratio) atmosphere. Resistivity of the SrNb0.1Ti0.9O3 films at room temperature was 64 μω·cm, a particular T 2 temperature dependence of the resistivity, from 25 K up to room temperature, was observed. Project (No. 2002CB613305) supported by the National Basic Research Program (973) of China  相似文献   

18.
Karabatsos compared the power of 36 person-fit statistics using receiver operating characteristics curves and found the HT statistic to be the most powerful in identifying aberrant examinees. He found three statistics, C, MCI, and U3, to be the next most powerful. These four statistics, all of which are nonparametric, were found to perform considerably better than each of 25 parametric person-fit statistics. Dimitrov and Smith replicated part of this finding in a similar study. The present article raises some issues with the comparisons performed in Karabatsos and Dimitrov and Smith and points to literature that suggests that the comparisons could have been performed in a more traditional and more fair manner. The present article then replicates the simulations of Karabatsos and demonstrates in several ways that the parametric person-fit statistics lz and ECI4z (that were also considered by Karabatsos) are as powerful as are HT and U3 in identifying aberrant examinees in more traditional and fair comparisons. Two parametric person-fit statistics are shown to lead to similar results as HT and U3 in a real data example.  相似文献   

19.
20.
Solid state reactions between β-diketones (HPMBP, HDBM) and LnAc3 · xH2O(La,Nd:x=3/2; Tb:x=4) have been investigated at low heating temperature. Pure compounds of Ln(PMBP)3 and Ln(DBM)3 are obtained by solid state reaction, and characterized by elemental analysis, infrared radiation (IR), X-ray diffraction (XRD) and photoacoustic spectra. The solid state reaction properties of β-diketones and their influences on the structures of products are discussed. Project supported by the National Natural Science Foundation of China (29475209)  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号