首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Benefits from the use of cadavers in anatomical education are well described. Historically, human embryos and fetal cadavers were used in anatomy education to understand development and congenital malformations. Recently, three-dimensional printed models produced from archival fetal specimens, and online repositories of images from archival collections of embryos and fetuses, have been used as an educational tool in human development courses. Given that the archival specimens were likely obtained prior to the era of informed consent, this raises questions about their appropriate and ethical use. Because some institutions in the United States retain archival collections of embryonic and fetal specimens that were once used as educational tools, their existence and utility require frequent reexamination against contemporary ethical frameworks to guide appropriate use or utilization. Four ethical rationales for uses of these collections are examined, including destruction, indefinite storage, use in research, and use in health professions education. Guidelines for the use of archival collections of human embryos and fetuses are presented. Indefinite storage and use in health professions education are supported, while use in research is also permitted, however, such use is limited and dependent on circumstance and purpose. The development of current digital repositories and three-dimensionally printed models based on archival collections that were collected without informed consent, or those promoting commercial opportunity, are not supported. New embryonic and fetal donations obtained with informed consent should include reference to potential uses with new technology and virtual, genetic, or imaging applications.  相似文献   

2.
New technological developments have frequently had major consequences for anatomy education, and have raised ethical queries for anatomy educators. The advent of three-dimensional (3D) printing of human material is showing considerable promise as an educational tool that fits alongside cadaveric dissection, plastination, computer simulation, and anatomical models and images. At first glance its ethical implications appear minimal, and yet the more extensive ethical implications around clinical bioprinting suggest that a cautious approach to 3D printing in the dissecting room is in order. Following an overview of early groundbreaking studies into 3D printing of prosections, organs, and archived fetal material, it has become clear that their origin, using donated bodies or 3D files available on the Internet, has ethical overtones. The dynamic presented by digital technology raises questions about the nature of the consent provided by the body donor, reasons for 3D printing, the extent to which it will be commercialized, and its comparative advantages over other available teaching resources. In exploring questions like these, the place of 3D printing within a hierarchical sequence of value is outlined. Discussion centers on the significance of local usage of prints, the challenges created by regarding 3D prints as disposable property, the importance of retaining the human side to anatomy, and the unacceptability of obtaining 3D-printed material from unclaimed bodies. It is concluded that the scientific tenor of 3D processes represents a move away from the human person, so that efforts are required to prevent them accentuating depersonalization and commodification.  相似文献   

3.
The teaching of anatomy has consistently been the subject of societal controversy, especially in the context of employing cadaveric materials in professional medical and allied health professional training. The reduction in dissection‐based teaching in medical and allied health professional training programs has been in part due to the financial considerations involved in maintaining bequest programs, accessing human cadavers and concerns with health and safety considerations for students and staff exposed to formalin‐containing embalming fluids. This report details how additive manufacturing or three‐dimensional (3D) printing allows the creation of reproductions of prosected human cadaver and other anatomical specimens that obviates many of the above issues. These 3D prints are high resolution, accurate color reproductions of prosections based on data acquired by surface scanning or CT imaging. The application of 3D printing to produce models of negative spaces, contrast CT radiographic data using segmentation software is illustrated. The accuracy of printed specimens is compared with original specimens. This alternative approach to producing anatomically accurate reproductions offers many advantages over plastination as it allows rapid production of multiple copies of any dissected specimen, at any size scale and should be suitable for any teaching facility in any country, thereby avoiding some of the cultural and ethical issues associated with cadaver specimens either in an embalmed or plastinated form. Anat Sci Educ 7: 479–486. © 2014 American Association of Anatomists.  相似文献   

4.
Advances in three‐dimensional (3D) printing allow for digital files to be turned into a “printed” physical product. For example, complex anatomical models derived from clinical or pre‐clinical X‐ray computed tomography (CT) data of patients or research specimens can be constructed using various printable materials. Although 3D printing has the potential to advance learning, many academic programs have been slow to adopt its use in the classroom despite increased availability of the equipment and digital databases already established for educational use. Herein, a protocol is reported for the production of enlarged bone core and accurate representation of human sinus passages in a 3D printed format using entirely consumer‐grade printers and a combination of free‐software platforms. The comparative resolutions of three surface rendering programs were also determined using the sinuses, a human body, and a human wrist data files to compare the abilities of different software available for surface map generation of biomedical data. Data shows that 3D Slicer provided highest compatibility and surface resolution for anatomical 3D printing. Generated surface maps were then 3D printed via fused deposition modeling (FDM printing). In conclusion, a methodological approach that explains the production of anatomical models using entirely consumer‐grade, fused deposition modeling machines, and a combination of free software platforms is presented in this report. The methods outlined will facilitate the incorporation of 3D printed anatomical models in the classroom. Anat Sci Educ 10: 383–391. © 2017 American Association of Anatomists.  相似文献   

5.
ON THE COVER: Students at Monash University in the Centre for Human Anatomy Education . In this issue of ASE, Professor Paul McMenamin and co‐authors describe how they have developed novel methods to produce 3D printed copies of anatomical specimens with data derived from either laser scanning or CT imaging. These 3D prints are being used here in a class of medical students learning head and neck anatomy. The authors hope these 3D prints will act not only to supplement cadaver based instruction but moreover, they point out in their article the potential value of 3D prints for institutions and countries where access to cadaver material is difficult for cultural, ethical or logistic reasons. Photograph by Gerard Hynes.  相似文献   

6.
Access to adequate anatomical specimens can be an important aspect in learning the anatomy of domestic animals. In this study, the authors utilized a structured light scanner and fused deposition modeling (FDM) printer to produce highly accurate animal skeletal models. First, various components of the bovine skeleton, including the femur, the fifth rib, and the sixth cervical (C6) vertebra were used to produce digital models. These were then used to produce 1:1 scale physical models with the FDM printer. The anatomical features of the digital models and three‐dimensional (3D) printed models were then compared with those of the original skeletal specimens. The results of this study demonstrated that both digital and physical scale models of animal skeletal components could be rapidly produced using 3D printing technology. In terms of accuracy between models and original specimens, the standard deviations of the femur and the fifth rib measurements were 0.0351 and 0.0572, respectively. All of the features except the nutrient foramina on the original bone specimens could be identified in the digital and 3D printed models. Moreover, the 3D printed models could serve as a viable alternative to original bone specimens when used in anatomy education, as determined from student surveys. This study demonstrated an important example of reproducing bone models to be used in anatomy education and veterinary clinical training. Anat Sci Educ 11: 73–80. © 2017 American Association of Anatomists.  相似文献   

7.
Two material 3D printing is becoming increasingly popular, inexpensive and accessible. In this paper, freely available printable files and dual extrusion fused deposition modelling were combined to create a number of functional anatomical models. To represent muscle and bone FilaFlex3D flexible filament and polylactic acid (PLA) filament were extruded respectively via a single 0.4 mm nozzle using a Big Builder printer. For each filament, cubes (5 mm3) were printed and analyzed for X, Y, and Z accuracy. The PLA printed cubes resulted in errors averaging just 1.2% across all directions but for FilaFlex3D printed cubes the errors were statistically significantly greater (average of 3.2%). As an exemplar, a focus was placed on the muscles, bones and cartilage of upper airway and neck. The resulting single prints combined flexible and hard structures. A single print model of the vocal cords was constructed which permitted movement of the arytenoids on the cricoid cartilage and served to illustrate the action of intrinsic laryngeal muscles. As University libraries become increasingly engaged in offering inexpensive 3D printing services it may soon become common place for both student and educator to access websites, download free models or 3D body parts and only pay the costs of print consumables. Novel models can be manufactured as dissectible, functional multi‐layered units and offer rich possibilities for sectional and/or reduced anatomy. This approach can liberate the anatomist from constraints of inflexible hard models or plastinated specimens and engage in the design of class specific models of the future. Anat Sci Educ 11: 65–72. © 2017 American Association of Anatomists.  相似文献   

8.
The utility of three-dimensional (3D) printed models for medical education in complex congenital heart disease (CHD) is sparse and limited. The purpose of this study was to evaluate the utility of 3D printed models for medical education in criss-cross hearts covering a wide range of participants with different levels of knowledge and experience, from medical students, clinical fellows up to senior medical personnel. Study participants were enrolled from four dedicated imaging workshops developed between 2016 and 2019. The study design was a non-randomized cross-over study to evaluate 127 participants' level of understanding of the criss-cross heart anatomy. This was evaluated using the scores obtained following teaching with conventional images (echocardiography and magnetic resonance imaging) versus a 3D printed model learning approach. A significant improvement in anatomical knowledge of criss-cross heart anatomy was observed when comparing conventional imaging test scores to 3D printed model tests [76.9% (61.5%–87.8%) vs. 84.6% (76.9%–96.2%), P < 0.001]. The increase in the questionnaire marks was statistically significant across all academic groups (consultants in pediatric cardiology, fellows in pediatric cardiology, and medical students). Ninety-four percent (120) and 95.2% (121) of the participants agreed or strongly agreed, respectively, that 3D models helped them to better understand the medical images. Participants scored their overall satisfaction with the 3D printed models as 9.1 out of 10 points. In complex CHD such as criss-cross hearts, 3D printed replicas improve the understanding of cardiovascular anatomy. They enhanced the teaching experience especially when approaching medical students.  相似文献   

9.
Three-dimensional (3D) printing technology has become more affordable, accessible, and relevant in healthcare, however, the knowledge of transforming medical images to physical prints still requires some level of training. Anatomy educators can play a pivotal role in introducing learners to 3D printing due to the spatial context inherent to learning anatomy. To bridge this knowledge gap and decrease the intimidation associated with learning 3D printing technology, an elective was developed through a collaboration between the Department of Anatomy and the Makers Lab at the University of California, San Francisco. A self-directed digital resource was created for the elective to guide learners through the 3D printing workflow, which begins with a patient's computed tomography digital imaging and communication in medicine (DICOM) file to a physical 3D printed model. In addition to practicing the 3D printing workflow during the elective, a series of guest speakers presented on 3D printing applications they utilize in their clinical practice and/or research laboratories. Student evaluations indicated that their intimidation associated with 3D printing decreased, the clinical and research topics were directly applicable to their intended careers, and they enjoyed the autonomy associated with the elective format. The elective and the associated digital resource provided students with the foundational knowledge of 3D printing, including the ability to extract, edit, manipulate, and 3D print from DICOM files, making 3D printing more accessible. The aim of disseminating this work is to help other anatomy educators adopt this curriculum at their institution.  相似文献   

10.
In recent decades, three-dimensional (3D) printing as an emerging technology, has been utilized for imparting human anatomy knowledge. However, most 3D printed models are rigid anatomical replicas that are unable to represent dynamic spatial relationships between different anatomical structures. In this study, the data obtained from a computed tomography (CT) scan of a normal knee joint were used to design and fabricate a functional knee joint simulator for anatomical education. Utility of the 3D printed simulator was evaluated in comparison with traditional didactic learning in first-year medical students (n = 35), so as to understand how the functional 3D simulator could assist in their learning of human anatomy. The outcome measure was a quiz comprising 11 multiple choice questions based on locking and unlocking of the knee joint. Students in the simulation group (mean score = 85.03%, ±SD 10.13%) performed significantly better than those in the didactic learning group, P < 0.05 (mean score = 70.71%, ±SD 15.13%), which was substantiated by large effect size, as shown by a Cohen’s d value of 1.14. In terms of learning outcome, female students who used 3D printed simulators as learning aids achieved greater improvement in their quiz scores as compared to male students in the same group. However, after correcting for the modality of instruction, the sex of the students did not have a significant influence on the learning outcome. This randomized study has demonstrated that the 3D printed simulator is beneficial for anatomical education and can help in enriching students’ learning experience.  相似文献   

11.
Understanding orbital anatomy is important for optometry students, but the learning resources available are often fragile, expensive, and accessible only during scheduled classes. Drawing on a constructivist, personalized approach to learning, this study investigated students’ perceptions of an alternative learning resource: a three-dimensional (3D) printed model used in an active learning task. A human skull was three-dimensionally scanned and used to produce a 3D printed model for each student. Students actively participated in model creation by tracing suture lines and coloring individual orbital bones during a practical class, then keeping the model for future study. Students’ perceptions of the 3D orbital model were examined through a questionnaire: the impact the model had on their learning; perceptions of the 3D orbit compared to traditional resources; and utility of having their own personalized model. The 3D orbit was well received by the student cohort. Participants (n = 69) preferred the 3D orbit as a resource for learning orbital bone anatomy compared to traditional learning resources, believing the model helped them to understand and visualize the spatial relationships of the bones, and that it increased their confidence to apply this knowledge. Overall, the participants liked that they co-created the model, could touch and feel it, and that they had access to it whenever they liked. Three-dimensional printing technology has the potential to enable the creation of effective learning resources that are robust, low-cost and readily accessible to students, and should be considered by anyone wishing to incorporate personalized resources to their multimodal teaching repertoire.  相似文献   

12.
Three-dimensional printing (3DP) technology has been increasingly applied in health profession education. Yet, 3DP anatomical models compared with the plastinated specimens as learning scaffolds are unclear. A randomized-controlled crossover study was used to evaluate the objective outcomes of 3DP models compared with the plastinated specimens through an introductory lecture and team study for learning relatively simple (cardiac) and complex (neck) anatomies. Given the novel multimaterial and multicolored 3DP models are replicas of the plastinated specimens, it is hypothesized that 3DP models have the same educational benefits to plastinated specimens. This study was conducted in two phases in which participants were randomly assigned to 3DP (n = 31) and plastinated cardiac groups (n = 32) in the first phase, whereas same groups (3DP, n = 15; plastinated, n = 18) used switched materials in the second phase for learning neck anatomy. The pretest, educational activities and posttest were conducted for each phase. Miller's framework was used to assess the cognitive outcomes. There was a significant improvement in students' baseline knowledge by 29.7% and 31.3% for Phase 1; 31.7% and 31.3% for Phase 2 plastinated and 3DP models. Posttest scores for cardiac (plastinated, 3DP mean ± SD: 57.0 ± 13.3 and 60.8 ± 13.6, P = 0.27) and neck (70.3 ± 15.6 and 68.3 ± 9.9, P = 0.68) phases showed no significant difference. In addition, no difference observed when cognitive domains compared for both cases. These results reflect that introductory lecture plus either the plastinated or 3DP modes were effective for learning cardiac and neck anatomy.  相似文献   

13.
Understanding the three‐dimensional (3D) nature of the human form is imperative for effective medical practice and the emergence of 3D printing creates numerous opportunities to enhance aspects of medical and healthcare training. A recently deceased, un‐embalmed donor was scanned through high‐resolution computed tomography. The scan data underwent segmentation and post‐processing and a range of 3D‐printed anatomical models were produced. A four‐stage mixed‐methods study was conducted to evaluate the educational value of the models in a medical program. (1) A quantitative pre/post‐test to assess change in learner knowledge following 3D‐printed model usage in a small group tutorial; (2) student focus group (3) a qualitative student questionnaire regarding personal student model usage (4) teaching faculty evaluation. The use of 3D‐printed models in small‐group anatomy teaching session resulted in a significant increase in knowledge (P = 0.0001) when compared to didactic 2D‐image based teaching methods. Student focus groups yielded six key themes regarding the use of 3D‐printed anatomical models: model properties, teaching integration, resource integration, assessment, clinical imaging, and pathology and anatomical variation. Questionnaires detailed how students used the models in the home environment and integrated them with anatomical learning resources such as textbooks and anatomy lectures. In conclusion, 3D‐printed anatomical models can be successfully produced from the CT data set of a recently deceased donor. These models can be used in anatomy education as a teaching tool in their own right, as well as a method for augmenting the curriculum and complementing established learning modalities, such as dissection‐based teaching. Anat Sci Educ 11: 44–53. © 2017 American Association of Anatomists.  相似文献   

14.
Increasing number of medical students and limited availability of cadavers have led to a reduction in anatomy teaching through human cadaveric dissection. These changes triggered the emergence of innovative teaching and learning strategies in order to maximize students learning of anatomy. An alternative approach to traditional dissection was presented in an effort to improve content delivery and student satisfaction. The objective of this study is to acquire three-dimensional (3D) anatomical data using structured-light surface scanning to create a dynamic four-dimensional (4D) dissection tool of four regions: neck, male inguinal and femoral areas, female perineum, and brachial plexus. At each dissection step, identified anatomical structures were scanned using a 3D surface scanner (Artec Spider™). Resulting 3D color meshes were overlaid to create a 4D (3D+time) environment. An educational interface was created for neck dissection. Its implementation in the visualization platform allowed 4D virtual dissection by navigating from surface to deep layers and vice versa. A group of 28 second-year medical students and 17 first-year surgery residents completed a satisfaction survey. A majority of medical students (96.4%) and 100% of surgery residents said that they would recommend this tool to their colleagues. According to surgery residents, the main elements of this virtual tool were the realistic high-quality of 3D acquisitions and possibility to focus on each anatomical structure. As for medical students, major elements were the interactivity and entertainment aspect, precision, and accuracy of anatomical structures. This approach proves that innovative solutions to anatomy education can be found to help to maintain critical content and student satisfaction in anatomy curriculum.  相似文献   

15.
In recent years, there has been a growing interest in white matter anatomy of the human brain. With advances in brain imaging techniques, the significance of white matter integrity for brain function has been demonstrated in various neurological and psychiatric disorders. As the demand for interpretation of clinical and imaging data on white matter increases, the needs for white matter anatomy education are changing. Because cross‐sectional images and formalin‐fixed brain specimens are often insufficient in visualizing the complexity of three‐dimensional (3D) white matter anatomy, obtaining a comprehensible conception of fiber tract morphology can be difficult. Fiber dissection is a technique that allows isolation of whole fiber pathways, revealing 3D structural and functional relationships of white matter in the human brain. In this study, we describe the use of fiber dissection in combination with plastination to obtain durable and easy to use 3D white matter specimens that do not require special care or conditions. The specimens can be used as a tool in teaching white matter anatomy and structural connectivity. We included four human brains and show a series of white matter specimens of both cerebrum and cerebellum focusing on the cerebellar nuclei and associated white matter tracts, as these are especially difficult to visualize in two‐dimensional specimens and demonstrate preservation of detailed human anatomy. Finally, we describe how the integration of white matter specimens with radiological information of new brain imaging techniques such as diffusion tensor imaging tractography can be used in teaching modern neuroanatomy with emphasis on structural connectivity. Anat Sci Educ. 7: 47–55. © 2013 American Association of Anatomists.  相似文献   

16.
Three‐dimensional (3D) digital animations were used to teach the human musculoskeletal system to first year kinesiology students. The purpose of this study was to assess the effectiveness of this method by comparing two groups from two different academic years during two of their official required anatomy examinations (trunk and upper limb assessments). During the upper limb section, the teacher used two‐dimensional (2D) drawings embedded into PowerPoint® slides and 3D digital animations for the first group (2D group) and the second (3D group), respectively. The same 3D digital animations were used for both groups during the trunk section. The only difference between the two was the multimedia used to present the information during the upper limb section. The 2D group surprisingly outperformed the 3D group on the trunk assessment. On the upper limb assessment no difference in the scores on the overall anatomy examination was found. However, the 3D group outperformed the 2D group in questions requiring spatial ability. Data supported that 3D digital animations were effective instructional multimedia material tools in teaching human anatomy especially in recalling anatomical knowledge requiring spatial ability. The importance of evaluating the effectiveness of a new instructional material outside laboratory environment (e.g., after a complete semester and on official examinations) was discussed. Anat Sci Educ 7: 430–437. © 2014 American Association of Anatomists.  相似文献   

17.
The use of two‐dimensional (2D) images is consistently used to prepare anatomy students for handling real specimen. This study examined whether the quality of 2D images is a critical component in anatomy learning. The visual clarity and consistency of 2D anatomical images was systematically manipulated to produce low‐quality and high‐quality images of the human hand and human eye. On day 0, participants learned about each anatomical specimen from paper booklets using either low‐quality or high‐quality images, and then completed a comprehension test using either 2D images or three‐dimensional (3D) cadaveric specimens. On day 1, participants relearned each booklet, and on day 2 participants completed a final comprehension test using either 2D images or 3D cadaveric specimens. The effect of image quality on learning varied according to anatomical content, with high‐quality images having a greater effect on improving learning of hand anatomy than eye anatomy (high‐quality vs. low‐quality for hand anatomy P = 0.018; high‐quality vs. low‐quality for eye anatomy P = 0.247). Also, the benefit of high‐quality images on hand anatomy learning was restricted to performance on short‐answer (SA) questions immediately after learning (high‐quality vs. low‐quality on SA questions P = 0.018), but did not apply to performance on multiple‐choice (MC) questions (high‐quality vs. low‐quality on MC questions P = 0.109) or after participants had an additional learning opportunity (24 hours later) with anatomy content (high vs. low on SA questions P = 0.643). This study underscores the limited impact of image quality on anatomy learning, and questions whether investment in enhancing image quality of learning aids significantly promotes knowledge development. Anat Sci Educ 10: 249–261. © 2016 American Association of Anatomists.  相似文献   

18.
It is essential for medical students to learn and comprehend human anatomy in three dimensions (3D). With this in mind, a new system was designed in order to integrate anatomical dissections with diagnostic computed tomography (CT) radiology. Cadavers were scanned by CT scanners, and students then consulted the postmortem CT images during cadaver dissection to gain a better understanding of 3D human anatomy and diagnostic radiology. Students used handheld digital imaging and communications in medicine viewers at the bench‐side (OsiriX on iPod touch or iPad), which enabled “pixel‐to‐tissue” direct comparisons of CT images and cadavers. Students had lectures and workshops on diagnostic radiology, and they completed study assignments where they discussed findings in the anatomy laboratory compared with CT radiology findings. This teaching method for gross and radiological anatomy was used beginning in 2009, and it yielded strongly positive student perspectives and significant improvements in radiology skills in later clinical courses. Anat Sci Educ 7: 438–449. © 2014 American Association of Anatomists.  相似文献   

19.
Three-dimensional (3D) digital anatomical models show potential to demonstrate complex anatomical relationships; however, the literature is inconsistent as to whether they are effective in improving the anatomy performance, particularly for students with low spatial visualization ability (Vz). This study investigated the educational effectiveness of a 3D stereoscopic model of the pelvis, and the relationship between learning with 3D models and Vz. It was hypothesized that participants learning with a 3D pelvis model would outperform participants learning with a two-dimensional (2D) visualization or cadaveric specimen on a spatial anatomy test, particularly when comparing those with low Vz. Participants (n = 64) were stratified into three experimental groups, who each attended a learning session with either a 3D stereoscopic model (n = 21), 2D visualization (n = 21), or cadaveric specimen (n = 22) of the pelvis. Medical and pre-medical student participants completed a multiple-choice pre-test and post-test during their respective learning session, and a long-term retention (LTR) test 2 months later. Results showed no difference in anatomy test improvement or LTR performance between the experimental groups. A simple linear regression analysis showed that within the 3D group, participants with high Vz tended to retain more than those with low Vz on the LTR test (R2 = 0.31, P = 0.01). The low Vz participants may be cognitively overloaded by the complex spatial cues from the 3D stereoscopic model. Results of this study should inform resource selection and curriculum design for health professional students, with attention to the impact of Vz on learning.  相似文献   

20.
To improve student preparedness for anatomy laboratory dissection, the dental gross anatomy laboratory was transformed using flipped classroom pedagogy. Instead of spending class time explaining the procedures and anatomical structures for each laboratory, students were provided online materials to prepare for laboratory on their own. Eliminating in‐class preparation provided the opportunity to end each period with integrative group activities that connected laboratory and lecture material and explored clinical correlations. Materials provided for prelaboratory preparation included: custom‐made, three‐dimensional (3D) anatomy videos, abbreviated dissection instructions, key atlas figures, and dissection videos. Data from three years of the course (n = 241 students) allowed for analysis of students' preferences for these materials and detailed tracking of usage of 3D anatomy videos. Students reported spending an average of 27:22 (±17:56) minutes preparing for laboratory, similar to the 30 minutes previously allocated for in‐class dissection preparation. The 3D anatomy videos and key atlas figures were rated the most helpful resources. Scores on laboratory examinations were compared for the three years before the curriculum change (2011–2013; n = 242) and three years after (2014–2016; n = 241). There was no change in average grades on the first and second laboratory examinations. However, on the final semi‐cumulative laboratory examination, scores were significantly higher in the post‐flip classes (P = 0.04). These results demonstrate an effective model for applying flipped classroom pedagogy to the gross anatomy laboratory and illustrate a meaningful role for 3D anatomy visualizations in a dissection‐based course. Anat Sci Educ 11: 385–396. © 2017 American Association of Anatomists.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号