共查询到20条相似文献，搜索用时 31 毫秒
1.
《Journal of The Franklin Institute》2019,356(14):7689-7703
This paper investigates the benefits of the inerter in improving vibration suppression of milling machine tools. The traditional method for repressing the cutting vibration of milling machines includes applying passive mechanical networks that consist of masses, dampers, and springs. However, because the mass element is not a genuine two-terminal network element, the achievable performance of the passive mechanical networks might be restricted. The inerter was invented to substitute the mass element and has been successfully applied to many mechanical systems, such as vehicles and buildings. This paper extends the application of the inerter to a milling machine and discusses the resulting vibration suppression improvements. We first built a model of the milling machine via experiments, followed by applying three basic suspension layouts to the model and illustrating how the inerter can help reduce system vibration. Lastly, we conducted experiments to verify the effectiveness of the inerter in improving the manufacturing performance of the milling machine. 相似文献
2.
In this paper a novel type of frictionless mechanical inerter device is presented, where instead of gears, motion of the flywheel is achieved using living-hinges. The design is a type of pivoted flywheel inerter inspired in part by the Dynamic Anti-resonant Vibration Isolator (DAVI) concept, which was first developed in the 1960s. Unlike the DAVI, it will be shown that the pivoted flywheel inerter has the advantage of producing balanced forces. Furthermore the use of living-hinges eliminates the need for gears or other frictional elements in the inerter mechanism. To demonstrate the utility of the new concept, a bench-top experiment was performed using a small-scale living-hinge inerter manufactured using polypropylene hinges. By estimating the experimental system parameters, the transmissibility results from the experiment could be compared to a mathematical model. These results showed that the living-hinge inerter provided an isolation effect of at least three orders of magnitude in terms of the maximum amplitude reduction from the uncontrolled system compared to that with the inerter added. Although friction was eliminated, the living-hinges did introduce additional damping, and this was found to correspond to an increase in the equivalent damping ratio for the uncontrolled system of 1.2%. It is shown that the living-hinge inerter developed in this paper fits all of the essential conditions required to be a practical inerter device. Furthermore, as it operates without mechanical friction, or fluid flow, it represents a new paradigm in experimental inerter technology. 相似文献
3.
《Journal of The Franklin Institute》2019,356(14):7626-7649
This work studies the advantageous features of the fluid inerter device for optimised structural control of buildings. Experimental data are first presented to characterise the fluid inerter dynamics, and validate the simplified analytical formulations. Building on these observations, the device is modelled as an inerter in parallel with a nonlinear dashpot representing a power law damping term. The latter dissipative effects are mainly induced by the pressure drops occurring in helical channels due to the fluid viscosity and density. Then, novel passive vibration control schemes are implemented for the earthquake protection of base-isolated buildings by combining the fluid inerter with a tuned mass damper system. To account for the uncertain nature of the earthquake input, the base acceleration is modelled as a Kanai–Tajimi filtered stationary random process. The optimal fluid inerter parameters, namely inertance and damping, are identified numerically by minimising stochastic performance indices relevant to displacement, acceleration, and energy-based measures of the structural response. The nonlinear damping behaviour of the fluid inerter is fully incorporated in the optimal design procedure via the statistical linearisation technique. Nonlinear response history analysis under an ensemble of 44 natural earthquake ground motions is carried out to assess the seismic performance of the system. Since inertance and damping are coupled characteristics in a real fluid inerter, design guidelines are finally outlined to determine the actual geometrical and mechanical properties of the device to achieve targeted parameters resulting from the optimisation procedure. 相似文献
4.
《Journal of The Franklin Institute》2022,359(14):7677-7707
The inerter has garnered much attention in the past two decades owing to its unique mechanical characteristics. As a substitution of the capacitance element based on the electrical-mechanical analogy, the inerter has outstanding advantages. Extensive investigations have been conducted for the development of inerter-based vibration isolation system. This paper provides a retrospective perspective and an update on the inerter's progress for vibration isolation in different fields. The advantages of inerter compared with mass element are analyzed and revealed. Some existing reviews and highly-cited papers are summarized to outline the inerter development progress. Thereafter, the inerter is reviewed in detail from the perspective of network analogy and synthesis, mechanical domain, and power flow transmission. The devices improvement and control approach are summarized. Finally, the significance of inerter research, the challenge in current studies, and promising inerter application fields are presented and discussed. This paper is closed by conclusions, which highlight the necessity of inerter research, current challenges, and future research directions. 相似文献
5.
Steen Krenk 《Journal of The Franklin Institute》2019,356(14):7704-7730
The paper presents an explicit two-step calibration procedure for tuned inerter based vibration absorbers on flexible structures. It makes use of a local approximate representation of the structural response to the device force, in which the contribution of the non-resonant modes is represented approximately around the resonance frequency by a background flexibility and a background inertia term. The calibration procedure then consists of two steps. The first step calibrates an equivalent vibration absorber including the background terms, and the second step subsequently evaluates the parameters of the actual device by extracting the background flexibility and inertia parameters. The first step represents the classic idealized single degree of freedom representation of the structure, whereas the second step leads to an increase of stiffness, inertia and damping parameters of the actual device due to background flexibility of the structure. The procedure is illustrated in detail for three inerter based vibration absorbers: parallel coupling of damper and stiffness, parallel coupling of damper and inerter, and finally a device with two dampers in parallel with stiffness and inerter elements, respectively. Explicit expressions for the calibration are obtained for each device, and it is demonstrated that the procedure leads to a balanced plateau of amplification around the resonance frequency of the magnitude assumed as the basis for the device parameter calibration. 相似文献
6.
Yi-Yuan Li Sara Ying Zhang Jason Zheng Jiang Simon Neild 《Journal of The Franklin Institute》2019,356(14):7836-7854
Vibration suppression capabilities of linear passive vibration absorbers, such as traditional tuned mass damper (TMD), and recently proposed inerter-based vibration absorbers, have been studied for multiple mechanical systems. In particular, significant performance advantages have been obtained with a specific device making use of both inerter and mass elements, namely the tuned mass damper inerter (TMDI). However, there are still countless mass-included inerter-based configurations that have not been studied, which can potentially provide more preferred dynamic properties. In this paper, an immittance-function-layout (IFL) is introduced, which can cover a large range of topological connection possibilities with both mass and inerter elements. With the recently proposed structural immittance format, a systematic approach is established to identify the most beneficial IFL type mass-included inerter-based configurations with pre-determined number of each element type. Vibration suppression performance with single-IFL type device and two parallel-connected IFLs (i.e. dual-IFL) type devices are investigated in this paper. Three optimal configurations are identified for mitigating the maximum inter-storey drift of an example 3-storey building model subjected to base excitation. With this 3-storey building model, results show that, for the optimum single-IFL configuration, the performance improvement is 7.3% compared with the optimum TMDI, and with identified beneficial dual-IFL configurations, up to 34.9% performance advantages are obtained. Furthermore, consistent performance gains are shown under real-life earthquake inputs and with a 10-storey building model using identified absorber configurations. 相似文献
7.
One potentially important application of continuously-variable transmissions (CVT's) is the improvement in fuel economy of internal combustion engine vehicles. However, many otherwise attractive CVT designs have a ratio coverage less than ideal for such applications. Split-path configurations can be used to extend the ratio coverage, providing even a geared neutral and reverse capability with some combinations of parameters. The increased coverage is in general achieved, however, only at the expense of lower overall CVT efficiency and a larger required variable unit capacity. All possible single-regime designs which use a single differential to extend the ratio coverage of the basic variable unit are considered, as well as two 2- regime designs. Data for the CVT efficiency characteristics are developed for both otherwise conventional vehicles and those utilizing an energy-storage flywheel, with steady speeds and three driving cycles used for the evaluation. It is found that the efficiency penalty for extending the ratio coverage can be quite severe for some combinations of system parameters and operating conditions, so that a complete analysis of this aspect is important when considering the concept for any specific application. 相似文献
8.
Iván Blanco-Chacón Dionís Remón Camilla Hollanti Montserrat Alsina 《Journal of The Franklin Institute》2014
We develop a new transmission scheme for additive white Gaussian noisy (AWGN) channels based on Fuchsian groups from rational quaternion algebras. The structure of the proposed Fuchsian codes is nonlinear and nonuniform, hence conventional decoding methods based on linearity and symmetry do not apply. Previously, only brute force decoding methods with complexity that is linear in the code size exist for general nonuniform codes. However, the properly discontinuous character of the action of the Fuchsian groups on the complex upper half-plane translates into decoding complexity that is logarithmic in the code size via a recently introduced point reduction algorithm. 相似文献
9.
This study introduces a novel particle inerter system (PIS) designed for vibration mitigation of structures. The new system comprises an inerter subsystem, a spring, and a tuned particle element, where the spring is used for tuning the particle element and the inerter subsystem is set for energy absorption and dissipation. The structural performance and the vibration mitigation effect of the PIS are assessed in terms of displacement and acceleration responses. An optimal design method is developed for a PIS under a performance-oriented design framework. Following the criterion of lightweight control, the added mass of the PIS is minimized under the constraints of target displacement and acceleration responses. A parametric analysis is performed and the robustness of the PIS for seismic response mitigation is verified. Design cases are carried out for the illustration of the proposed design method. The results show that the structural displacement and acceleration responses can be reduced significantly with the help of a PIS. Compared with the particle tuned mass damper with the same parameters, both the energy absorption and dissipation effects of the PIS are increased and the relative displacement response of the container in the PIS is reduced by the inerter subsystem. Under the same performance target, the required physical mass of the container and particles in the PIS is minimized and is significantly smaller than that of the conventional particle tuned mass damper. 相似文献
10.
瓶颈缓冲是生产系统运行的重要参数。基于在制品库存成本、平均故障间隔时间,平均维修时间建立了瓶颈缓冲的基本模型;并针对实际生产系统中单机工序、多机工序并存的情况,面向度最小的工序,考虑该两类工序的故障时其后工序的在制品,对瓶颈缓冲的基本模型进行了修正;最后用生产周期的方差与均值的比值研究了其他生产波动因素对缓冲的影响。本文研究考虑了生产系统的实际情况,所得的瓶颈缓冲量更加精确。 相似文献
11.
Willian M. Kuhnert Paulo J. Paupitz Gonçalves Diego F. Ledezma-Ramirez Michael J. Brennan 《Journal of The Franklin Institute》2021,358(1):1070-1086
Recently, a lot of attention has been given to a mechanical device known as the inerter. It is a mechanical component that can be compared to a capacitor with two ungrounded terminals in the mechanical-electrical systems analogy. In this paper, it is shown that although the concept of an inerter as a separate mechanical element is relatively new, there are several well-established vibration isolation systems that exhibit similar behavior to a simple lumped parameter system containing an inerter. Through a review of the literature, a link is established between the old and new ideas. Furthermore, a comparison between the systems is carried out using the quantities of mechanical impedance and displacement transmissibility. The advantages and disadvantages of using the inerter in vibration isolation are discussed, and a simple way of improving the high-frequency performance without severely degrading the low-frequency performance is described. 相似文献
12.
起伏地形下日照时间计算模型的修正 总被引：1，自引：0，他引：1
通过对日照时间计算模型的原理分析,发现该模型具有系统误差,误差产生的原因在于模型中忽略了气象站的日照百分率是基于天文可照时间计算这一事实。文中利用平原、丘陵、山区的实际资料对模型进行了试验分析,探讨了其系统误差的变化规律。针对原模型误差的产生原因,提出了去除系统误差的日照时间计算修正模型。从公式解释和实际资料两方面对修正模型进行了系统误差和非系统误差的分析,证明修正模型消除了系统误差,使总体误差大大减小,其总的误差仅由天空状况不一致及DEM分辨率导致的误差引起,误差大小与测站到计算点的距离及天气系统有关。在对实际资料计算结果的分析后,指出在目前的气象站点密度配置条件下用修正模型计算日照时间能够满足实际业务及服务的需要。 相似文献
13.
This paper investigates the security control problem for a class of two-time-scale cyber-physical systems (TTSCPSs) with multiple transmission channels under the denial-of-service (DoS) attacks. A linear TTSCPSs model is first proposed with slow and fast transmission channels, which correspond to slow and fast physical components in terms of their communicating capacities and sampling rates. The measurement data-packets are transmitted via slow and fast transmission channels which are compromised by asynchronous DoS attacks. A novel composite controller depending on the singular perturbation parameter (SPP) is formulated and corresponding switching laws are designed to achieve certain resilience against DoS attacks. Then, by establishing a SPP-dependent Lyapunov function, sufficient conditions are obtained on the duration and frequency of the DoS attacks, such that, for any SPP less than or equal to a predefined upper bound, the input-to-state stability can be guaranteed for the closed-loop TTSCPSs. Finally, a networked DC motor control system is employed to demonstrate the effectiveness of the proposed security control algorithm. 相似文献
14.
根据公文流转特点,对工作流模型进行了简化。提出了一种基于关系数据库的公文工作流模型．设计并实现了一个公文流转系统。该研究已在某政府机构的办公自动化系统中取得了较好的应用效果。 相似文献
15.
16.
L. Etienne Y. Khaled S.Di Gennaro J.P. Barbot 《Journal of The Franklin Institute》2017,354(1):372-391
In this paper we investigate the observation and stabilization problems of a linear plant subject to network constraints and partial state knowledge, making use of the event-triggered technique. In order to address these problems, an impulsive observer is designed. Sufficient conditions are given to ensure a milder version of separation principle for linear systems controlled via an event-triggered controller. The proposed observer ensures practical state estimation, while the corresponding dynamic controller ensures practical stabilization. The sampling and the transmission of the output and the input are done asynchronously. The dynamic controller is tested in simulation on the linearized inverted pendulum. 相似文献
17.
自然资源资产负债表是十八届三中全会为生态文明建设与社会经济可持续发展提出的全新概念。因此,探索各种自然资源资产负债表编制的框架与方法、界定并核算自然资源资产负债对于编制自然资源资产负债表具有极其重要的意义。本研究首先从自然资源资产负债的经济学本质出发,结合自然资源资产负债产生的前提、途径以及界定依据,阐述自然资源资产负债的基本内涵;在此基础上,从可再生资源数量变化、不可再生资源数量变化和自然资源质量变化三个方面对因自然资源“过度”消耗而产生的自然资源资产负债进行界定;最后,以森林资源、水资源、矿产资源和土地资源为研究对象,从资源可持续利用阈值和国家政策红线两个方面提出了自然资源资产负债核算的基本思路,以期为自然资源资产负债表中的负债界定及其核算提供借鉴。 相似文献
18.
Zhenzhen Yang Lu Fan Yongpeng Yang Zhen Yang Guan Gui 《Journal of The Franklin Institute》2019,356(16):10138-10154
Moving object detection is one of the most challenging tasks in computer vision and many other fields, which is the basis for high-level processing. Low-rank and sparse decomposition (LRSD) is widely used in moving object detection. The existing methods primarily address the LRSD problem by exploiting the approximation of rank functions and sparse constraints. Conventional methods usually consider the nuclear norm as the approximation of the low-rank matrix. However, the actual results show that the nuclear norm is not the best approximation of the rank function since it simultaneously minimize all the singular values. In this paper, we exploit a novel nonconvex surrogate function to approximate the low-rank matrix and propose a generalized formulation for nonconvex low-rank and sparse decomposition based on the generalized singular value thresholding (GSVT) operator. And then, we solve the proposed nonconvex problem via the alternating direction method of multipliers (ADMM), and also analyze its convergence. Finally, we give numerical results to validate the proposed algorithm on both synthetic data and real-life image data. The results demonstrate that our model has superior performance. And we use the proposed nonconvex model for moving objects detection, and provide the experimental results. The results show that the proposed method is more effective than representative LRSD based moving objects detection algorithms. 相似文献
19.
针对“双轨制”下养老金在企业、机关事业单位分配额度相差太大等问题,以广西区2002—2009年各单位养老金发放情况为例,采用数据处理、数据拟合、控制变量、图像分析的方法,预测出2011年至2050年广西平均工资以及比值关系,证明“双轨”制度的不合理性。然后建立一个新的模型计算职工退休后每年可领到的奖金,从模型明显发现工作时间越长,缴纳指数越高,年退休近金也越高。对于同时开始工作和退休的人员每年领取的退休金在不同单位保持比值在[0．85·1．O]之间,此模型具有一定合理性。 相似文献
20.
《Information processing & management》2023,60(1):103122
Aiming at the problem that watermark information is easy to be lost in two-dimensional text image watermarking, a three-dimensional text image watermarking model is proposed based on multilayer overlapping of extracted two-dimensional information, and a specific method is accordingly realized by means of embedding, extracting and overlapping of multiple watermarks in sequence. We discuss the influence of the sequence order, positional distancing and color difference of the extracted multiple two-dimensional information on displaying a three-dimensional text watermark image. In addition, considering the crucial evaluation indices of the invisibility and robustness for the watermarking algorithm, the selection method for superior embedding regions of multiple watermarks is also constructed to enhance the robust performance of watermarks under the premise of effective invisibility. Moreover, we embed the multiple two-dimensional information into the host image by using the undecimated dual-tree complex wavelet transforms - bidiagonal singular value decomposition algorithm. In this way, the extracted multiple two-dimensional information is automatically overlapped to generate the three-dimensional text watermarking according to the optimal matching parameters. We use standard image processing data set to carry out experiments, the results show that the peak signal to noise ratio before and after embedded watermarks is higher than 39 dB, and the peak signal to noise ratio between the original watermarks and the extracted watermarks is more than 37 dB, which is superior to the current reported watermark model. Therefore, it is suggested that the proposed model shows good invisibility and robustness and can reduce the loss of watermark during transmission and attack as much as possible. 相似文献