首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
The aim of this study was to determine the response of cyclists to manipulations of cadence and power output in terms of force application and plantar pressure distribution. Two groups of cyclists, 17 recreational and 12 competitive, rode at three nominal cadences (60, 80, 100 rev x min(-1)) and four power outputs (100, 200, 300, 400 W) while simultaneous force and in-shoe pressure data were collected. Two piezoelectric triaxial force transducers mounted in the right pedal measured components of the pedal force and orientation, and a discrete transducer system with 12 transducers recorded the in-shoe pressures. Force application was characterized by calculating peak resultant and peak effective pedal forces and positive and negative impulses. In-shoe pressures were analysed as peak pressures and as the percent relative load. The force data showed no significant group effect but there was a cadence and power main effect. The impulse data showed a significant three-way interaction. Increased cadence resulted in a decreased positive impulse, while increased power output resulted in an increased impulse. The competitive group produced less positive impulse but the difference became less at higher cadences. Few between-group differences were found in pressure, notable only in the pressure under the first metatarsal region. This showed a consistent pattern of in-shoe pressure distribution, where the primary loading structures were the first metatarsal and hallux. There was no indication that pressure at specific sites influenced the pedal force application. The absence of group differences indicated that pressure distribution was not the result of training, but reflected the intrinsic relationship between the foot, the shoe and the pedal.  相似文献   

2.
The intent of this study was two-fold. The first aim was to investigate how cyclists orient forces applied by the feet to the pedals in response to varying power output and cadence demands, and the second was to assess whether competitive riders responded differently from recreational riders to such variations. One group consisted of US Cycling Federation category II licensed competitive cyclists (n = 7) and the second group consisted of recreational cyclists with no competitive experience (n = 38). The subjects rode an instrumented stationary 10-speed geared bicycle mounted on a platform designed to provide rolling and inertial resistance for six pedal rate/power output conditions for a minimum of 2 min for each ride. The pedalling rates were 60, 80 and 100 rev min-1 and the power outputs 100 and 235 W. All rides were presented in random order. The forces applied to the pedals, the pedal angle with respect to the crank and the crank angle were recorded for the final 30 s of each ride. From these data, a number of variables were computed including peak normal and tangential forces, crank torque, angular impulse, proportion of resultant force perpendicular to the crank, and pedal angle. Both the competitive and recreational groups responded similarly to increases in cadence and power output. There was a decrease in the peak normal forces, whereas the tangential component remained almost constant as cadence was increased. Regardless of cadence, the riders responded to increased power output demands by increasing the amount of positive angular impulse. All the riders had a reduced index of effectiveness as cadence increased. This was found to be the result of the large effect of the forces during recovery on this calculation. There were no significant differences between the two groups in each of these variables over all conditions. It was concluded that the lack of difference between the groups was a combined consequence of the limited degrees of freedom associated with the bicycle and that the relatively low power output for the competitive riders was insufficient to discriminate or highlight superior riding technique.  相似文献   

3.
The effective force applied on the crank, the index of pedalling effectiveness, and the economy of movement at 60, 75, 90, and 105 rev/min cadences were examined in nine cyclists and eight triathletes. Tests were performed on two days. Maximal oxygen uptake was measured and the second ventilatory threshold was estimated on day 1 using a stationary bicycle. On day 2, the four different cadences were tested at about 5% below the second ventilatory threshold. A strain gauge instrumented clip-less pedal mounted on the bicycle enabled us to measure the normal and tangential forces exerted on the pedal, while the pedal and crank angles were monitored with the aid of a video system. Based on this information, the effective force and the index of pedalling effectiveness were calculated. Cyclists produced significantly more effective force and a higher index of pedalling effectiveness at 60 and 75 rev/min and were significantly more economic at all cadences than triathletes. The significant and positive correlation between effective force and economy at all cadences suggests that improvement of the effective force would reflect on economy.  相似文献   

4.
Effective force and economy of triathletes and cyclists   总被引：1，自引：0，他引：1  
The effective force applied on the crank, the index of pedalling effectiveness, and the economy of movement at 60, 75, 90, and 105 rev/min cadences were examined in nine cyclists and eight triathletes. Tests were performed on two days. Maximal oxygen uptake was measured and the second ventilatory threshold was estimated on day 1 using a stationary bicycle. On day 2, the four different cadences were tested at about 5% below the second ventilatory threshold. A strain gauge instrumented clip-less pedal mounted on the bicycle enabled us to measure the normal and tangential forces exerted on the pedal, while the pedal and crank angles were monitored with the aid of a video system. Based on this information, the effective force and the index of pedalling effectiveness were calculated. Cyclists produced significantly more effective force and a higher index of pedalling effectiveness at 60 and 75 rev/min and were significantly more economic at all cadences than triathletes. The significant and positive correlation between effective force and economy at all cadences suggests that improvement of the effective force would reflect on economy.  相似文献   

5.
The aim of this study was to analyse the effect of pedalling rate on the pattern of mechanical torque application and on neuromuscular fatigue during prolonged cycling exercise. Eleven well-trained individuals performed three 1-h pedalling sessions, at 50 rev.min-1, 110 rev.min-1 and a freely chosen cadence, at an intensity corresponding to 65% of their maximal aerobic power. The mechanical torque applied on the right pedal was recorded for 30 s every 5 min while pedalling. Contractile and neural properties of the quadriceps and hamstring muscles were analysed before and immediately after each of the three pedalling sessions. The post-exercise reduction in knee extensors maximal voluntary contraction was significant (P<0.01) irrespective of the cadence, but no difference was found between cadences. The use of a particular cadence did not lead to preferentially central or peripheral fatigue. An increase in cadence resulted in greater positive and negative work generated during pedalling. The mechanical pattern was not altered during the exercise, whatever the selected cadence. The present study demonstrates that despite the occurrence of neuromuscular fatigue, trained individuals maintained a stable pedalling pattern throughout an endurance cycling exercise for cadences ranging from 50 to 110 rev.min-1.  相似文献   

6.
场地自行车运动员踏蹬动作肌电研究   总被引：1，自引：0，他引：1  
为从神经肌肉协调角度研究场地自行车运动员踏蹬动作技术特征,本文结合场地4km专项特点,研究10名场地自行车运动员在500w负荷下以100rpm、120rpm、130rpm、140rpm四种频率稳态骑行时下肢7块肌肉的EMG信号及四组单、双关节拮抗肌协调的变化规律。结果表明,更高踏蹬频率下RF活动显著提前至上提末段,TDC处平滑过渡另有机制。VL和GAS活动区域显著增大。TA突出表现为双峰模式,前峰在协调GAS传递能量和防止VM功能加强引起的膝关节过伸方面起重要作用。更高频率下RF与GM间拮抗机制表现为相反改变,BF/VL始终保持正相关,有助于下踏阶段膝-髋间的净能量传递。VL与GAS间显著负相关保证了近端环节至曲柄的高效传递,TA与GAS间显著负相关侧面证实TA双峰的重要意义。研究提示,专项频率(130-140rpm)下踏蹬动作有其特征的肌肉协调变化。  相似文献   

7.
Limited evidence showed that higher workload increases knee forces without effects from changes in pedalling cadence. This study assessed the effects of workload and cadence on patellofemoral and tibiofemoral joint forces using a new model. Right pedal force and lower limb joint kinematics were acquired for 12 competitive cyclists at two levels of workload (maximal and second ventilatory threshold) at 90 and 70 rpm of pedalling cadence. The maximal workload showed 18% larger peak patellofemoral compressive force PFC (large effect size, ES) than the second ventilatory threshold workload (90 rpm). In the meantime, the 90-rpm second ventilatory threshold was followed by a 29% smaller PFC force (large ES) than the 70-rpm condition. Normal and anterior tibiofemoral compressive forces were not largely affected by changes in workload or pedalling cadence. Compared to those of previous studies, knee forces normalized by workload were larger for patellofemoral (mean = 19 N/J; difference to other studies = 20–45%), tibiofemoral compressive (7.4 N/J; 20–572%), and tibiofemoral anterior (0.5 N/J; 60–200%) forces. Differences in model design and testing conditions (such as workload and pedalling cadence) may affect prediction of knee joint forces.  相似文献   

8.
The aim of this study was to analyse the effect of pedalling rate on the pattern of mechanical torque application and on neuromuscular fatigue during prolonged cycling exercise. Eleven well-trained individuals performed three 1-h pedalling sessions, at 50 rev?·?min?1, 110 rev?·?min?1 and a freely chosen cadence, at an intensity corresponding to 65% of their maximal aerobic power. The mechanical torque applied on the right pedal was recorded for 30?s every 5?min while pedalling. Contractile and neural properties of the quadriceps and hamstring muscles were analysed before and immediately after each of the three pedalling sessions. The post-exercise reduction in knee extensors maximal voluntary contraction was significant (P <?0.01) irrespective of the cadence, but no difference was found between cadences. The use of a particular cadence did not lead to preferentially central or peripheral fatigue. An increase in cadence resulted in greater positive and negative work generated during pedalling. The mechanical pattern was not altered during the exercise, whatever the selected cadence. The present study demonstrates that despite the occurrence of neuromuscular fatigue, trained individuals maintained a stable pedalling pattern throughout an endurance cycling exercise for cadences ranging from 50 to 110 rev?·?min?1.  相似文献   

9.
Body position is known to alter power production and affect cycling performance. The aim of this study was to compare mechanical power output in two riding positions, and to calculate the effects on critical power (CP) and W′ estimates. Seven trained cyclists completed three peak power output efforts and three fixed-duration trial (3-, 5- and 12-min) riding with their hands on the brake lever hoods (BLH), or in a time trial position (TTP). A repeated-measures analysis of variance showed that mean power output during the 5-min trial was significantly different between BLH and TTP positions, resulting in a significantly lower estimate of CP, but not W′, for the TTP trial. In addition, TTP decreased the performance during each trial and increased the percentage difference between BLH and TTP with greater trial duration. There were no differences in pedal cadence or heart rate during the 3-min trial; however, TTP results for the 12-min trial showed a significant fall in pedal cadence and a significant rise in heart rate. The findings suggest that cycling position affects power output and influences consequent CP values. Therefore, cyclists and coaches should consider the cycling position used when calculating CP.  相似文献   

10.
利用SRM功率车以及安装在功率车上的测力系统(Powertec-System)研究不同踏蹬频率下场地自行车运动员一个踏蹬周期内作用于曲柄的切向踏蹬力特征。以8名自行车运动员为研究对象,在SRM功率车上进行10min、90rpm、120w的准备活动后,进行阻力负荷为500watt的骑行,踏蹬频率分别为100、120、130、140rpm,顺序随机选择,骑行稳定后,采集连续5s的踏蹬力数据。结果表明,随着踏蹬频率的提高,作用在左、右两侧曲柄的切向踏蹬力分量的正均值、均值、最大值减小,两侧切向踏蹬力分量之和的均值及峰值也减小(p<0.01);左、右侧正切向踏蹬力分量的起止位置、最值位置、双侧切向踏蹬力分量之和的峰值位置均随着踏蹬频率的增大而提前(p<0.01);在踏蹬周期的下半段,踏蹬频率越高,切向踏蹬力曲线越低,在踏蹬周期的上半段,踏蹬频率越高,切向踏蹬力曲线越高。  相似文献   

11.
Non-circular chainrings theoretically enhance cycling performance by increasing effective chainring diameter and varying crank velocity, but research has failed to consistently reproduce the benefits in cycling trials. The aim of this study was (1) to investigate the effect of different chainring shapes on sagittal knee joint moment and sagittal lower limb joint powers and (2) to investigate whether alterations are affected by cadence and workload. Fourteen elite cyclists cycled in six conditions (70, 90 and 110 rpm, each at 180 and 300 W), for 2 min each, using three chainrings of different ovalities (1.0–1.215). Kinematic data and pedal forces were collected. For most conditions, only the chainring with the highest ovality (1.215) was characterised by smaller sagittal knee joint moments, smaller relative sagittal knee joint power contribution and larger relative sagittal hip joint power contribution, which suggests a change from maximising efficiency to maximising power production. Effect sizes increased with higher cadences, but not with higher workload. This study has application for athletes, clinicians and sports equipment industry as a non-circular chainring can change joint-specific power generation and decrease knee joint moment, but certain ovality seems to be necessary to provoke this effect.  相似文献   

12.
The aim of this study was to determine whether cyclists modify the pattern of force application to become more effective during a prolonged ride to exhaustion. Twelve competitive male cyclists completed a steady-rate exercise ride to exhaustion at 80% of their maximum power output at 90 rev x min(-1) on a cycle ergometer. Pedal force, pedal and crank angle data were collected from an instrumented bicycle for three pedalling cycles at the end of the first and final minutes of the exercise test with simultaneous video recording of the lower limbs. Kinematic and force data were combined to compute hip, knee and ankle joint moments. There were changes in the pattern of force application, joint kinematics and joint moments of force. Comparison of the first minute and the final minute ride revealed significantly increased peak effective force (340 +/- 65.0 and 377 +/- 74.8 N for the first and final minute, respectively; F1,11 = 7.44, P = 0.02), increased positive (28.4 +/- 4.5 and 30.5 +/- 4.8 N x s for the first and final minute, respectively; F1,11 = 7.80, P = 0.02) and negative angular impulses (-1.5 +/- 1.6 and -2.4 +/- 1.5 N x s for the first and final minute, respectively; F1,11 = 4.50, P = 0.06). Contrary to our initial assumptions, it would appear that riders became less effective during the recovery phase, which increased the demand for forces during the propulsive phase. Training the pattern of force application to improve effectiveness may be a useful strategy to prolong an endurance ride.  相似文献   

13.
Abstract

Knee functional disorders are one of the most common lower extremity non-traumatic injuries reported by cyclists. Incorrect bicycle configuration may predispose cyclist to injury but the evidence of an effect of saddle setback on knee pain remains inconclusive. The aim of this study was to determine the effect of saddle setback on knee joint forces during pedalling using a musculoskeletal modelling approach. Ten cyclists were assessed under three saddle setback conditions (range of changes in saddle position ~6 cm) while pedalling at a steady power output of 200 W and cadence of 90 rpm. A cycling musculoskeletal model was developed and knee joint forces were estimated using an inverse dynamics method associated with a static optimisation procedure. Our results indicate that moving the saddle forwards was not associated with an increase of patellofemoral joint forces. On the contrary, the tibiofemoral mean and peak compression force were 14 and 15% higher in the Backward than in the Forward condition, respectively. The peak compression force was related to neither pedal force nor quadriceps muscle force but coincided with the eccentric contraction of knee flexor muscles. These findings should benefit bike fitting practitioners and coaches in the design of specific training/rehabilitation protocols.  相似文献   

14.
Cyclists regularly change from a seated to a standing position when the gradient increases during uphill cycling. The aim of this study was to analyse the physiological and biomechanical responses between seated and standing positions during distance-based uphill time trials in elite cyclists. Thirteen elite cyclists completed two testing sessions that included an incremental-specific cycling test on a cycle ergometer to determine VO2max and three distance-based uphill time trials in the field to determine physiological and biomechanical variables. The change from seated to standing position did not influence physiological variables. However, power output was increased by 12.6% in standing position when compared with seated position, whereas speed was similar between the two positions. That involved a significant increase in mechanical cost and tangential force (Ftang) on the pedal (+19% and +22.4%, respectively) and a decrease (?8%) in the pedalling cadence. Additionally, cyclists spent 22.4% of their time in the standing position during the climbing time trials. Our findings showed that cyclists alternated between seated and standing positions in order to maintain a constant speed by adjusting the balance between pedalling cadence and Ftang.  相似文献   

15.
ABSTRACT

Purpose: The present study aimed to compare the vertical ground reaction force responses during the performance of the stationary running water-based exercise with and without equipment at different cadences by elderly women. Method: Nineteen elderly women (age: 68.6 ± 5.0 years; body mass: 69.0 ± 9.5 kg; height: 154.9 ± 5.6 cm) completed one session consisting of the performance of the water-based stationary running with elbow flexion and extension immersed to the xiphoid process depth. The exercise was performed in three conditions, without equipment, with water-floating and with water-resistance equipment, at three cadences (80 b·min?1, 100 b·min?1 and maximal) in a randomized order. Peak and impulse of vertical ground reaction force were collected during the exercise using an underwater force plate. Repeated measures two-way ANOVA was used (α = 0.05). Results: Peak vertical ground reaction force (p < .001) and impulse (p ≤ 0.002) resulted in lower values for the water-floating use (0.42–0.48 BW and 0.07–0.13 N.s/BW) in comparison to the water-resistance equipment use (0.46–0.60 BW and 0.09–0.16 N.s/BW) and to the non-use of equipment (0.45–0.60 BW and 0.07–0.17 N.s/BW), except for the impulse at the maximal cadence. In addition, peak vertical ground reaction force at 80 b·min?1 (p = .002) and impulse at the maximal cadence (p < .001) showed lower values compared to the other cadences. Conclusion: The use of water-floating equipment minimizes the vertical ground reaction force during the stationary running water-based exercise performed by elderly women regardless of the cadence.  相似文献   

16.
ABSTRACT

Previous studies have been limited to describe asymmetries during pedalling and suggest possible repercussion on performance and/or injury risks. However, few studies have presented strategies to mitigate asymmetries. The purpose of this study was to assess the effectiveness of a pedalling retraining intervention to reduce bilateral pedal force asymmetries. Twenty cyclists were assessed and 10 enrolled in a pedalling retraining method receiving visual and verbal feedback of pedal forces. The asymmetry index was computed for comparison of bilateral peak pedal forces and used during retraining (12 trials at 70% of peak power). Significantly larger asymmetry was observed for asymmetrical cyclists at the first three trials (P < 0.01 and ES = 1.39), which was reduced when post-retraining was compared to measures from symmetrical cyclists (P = 0.69 and ES = 0.18). Cyclists with larger asymmetry (>20%) in bilateral pedal forces reduce their asymmetries using sessions of pedalling retraining and achieve asymmetry indices similar to symmetrical cyclists.  相似文献   

17.
The cadence that maximises power output developed at the crank by an individual cyclist is conventionally determined using a laboratory test. The purpose of this study was two-fold: (i) to show that such a cadence, which we call the optimal cadence, can be determined using power output, heart-rate, and cadence measured in the field and (ii) to describe methodology to do so. For an individual cyclist's sessions, power output is related to cadence and the elicited heart-rate using a non-linear regression model. Optimal cadences are found for two riders (83 and 70 revolutions per minute, respectively); these cadences are similar to the riders’ preferred cadences (82–92?rpm and 65–75?rpm). Power output reduces by approximately 6% for cadences 20?rpm above or below optimum. Our methodology can be used by a rider to determine an optimal cadence without laboratory testing intervention: the rider will need to collect power output, heart-rate, and cadence measurements from training and racing sessions over an extended period (>6 months); ride at a range of cadences within those sessions; and calculate his/her optimal cadence using the methodology described or a software tool that implements it.  相似文献   

18.
The purpose of this study was to compare the pedalling technique in road cyclists of different competitive levels. Eleven professional, thirteen elite and fourteen club cyclists were assessed at the beginning of their competition season. Cyclists’ anthropometric characteristics and bike measurements were recorded. Three sets of pedalling (200, 250 and 300 W) on a cycle ergometer that simulated their habitual cycling posture were performed at a constant cadence (~90 rpm), while kinetic and kinematic variables were registered. The results showed no differences on the main anthropometric variables and bike measurements. Professional cyclists obtained higher positive impulse proportion (1.5–3.3% and P < 0.05), mainly due to a lower resistive torque during the upstroke (15.4–28.7% and P < 0.05). They also showed a higher ankle range of movement (ROM, 1.1–4.0° and P < 0.05). Significant correlations (P < 0.05) were found between the cyclists’ body mass and the kinetic variables of pedalling: positive impulse proportion (r = ?0.59 to ?0.61), minimum (r = ?0.59 to ?0.63) and maximum torques (r = 0.35–0.47). In conclusion, professional cyclists had better pedalling technique than elite and club cyclists, because they opted for enhancing pulling force at the recovery phase to sustain the same power output. This technique depended on cycling experience and level of expertise.  相似文献   

19.
Although the link between sagittal plane motion and exercise intensity has been highlighted, no study assessed if different workloads lead to changes in three-dimensional cycling kinematics. This study compared three-dimensional joint and segment kinematics between competitive and recreational road cyclists across different workloads. Twenty-four road male cyclists (12 competitive and 12 recreational) underwent an incremental workload test to determine aerobic peak power output. In a following session, cyclists performed four trials at sub-maximal workloads (65, 75, 85 and 95% of their aerobic peak power output) at 90?rpm of pedalling cadence. Mean hip adduction, thigh rotation, shank rotation, pelvis inclination (latero-lateral and anterior–posterior), spine inclination and rotation were computed at the power section of the crank cycle (12 o'clock to 6 o'clock crank positions) using three-dimensional kinematics. Greater lateral spine inclination (p?p?p?相似文献   

20.
The purpose of this study was to assess the power output of field-based downhill mountain biking. Seventeen trained male downhill cyclists (age 27.1 +/- 5.1 years) competing nationally performed two timed runs of a measured downhill course. An SRM powermeter was used to simultaneously record power, cadence, and speed. Values were sampled at 1-s intervals. Heart rates were recorded at 5-s intervals using a Polar S710 heart rate monitor. Peak and mean power output were 834 +/- 129 W and 75 +/- 26 W respectively. Mean power accounted for only 9% of peak values. Paradoxically, mean heart rate was 168 +/- 9 beats x min(-1) (89% of age-predicted maximum heart rate). Mean cadence (27 +/- 5 rev x min(-1)) was significantly related to speed (r = 0.51; P < 0.01). Analysis revealed an average of 38 pedal actions per run, with average pedalling periods of 5 s. Power and cadence were not significantly related to run time or any other variable. Our results support the intermittent nature of downhill mountain biking. The poor relationships between power and run time and between cadence and run time suggest they are not essential pre-requisites to downhill mountain biking performance and indicate the importance of riding dynamics to overall performance.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号