首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Understanding the correlation between exposed surfaces and performances of controlled nanocatalysts can aid effective strategies to enhance electrocatalysis, but this is as yet unexplored for the nitrogen reduction reaction (NRR). Here, we first report controlled synthesis of well-defined Pt3Fe nanocrystals with tunable morphologies (nanocube, nanorod and nanowire) as ideal model electrocatalysts for investigating the NRR on different exposed facets. The detailed electrocatalytic studies reveal that the Pt3Fe nanocrystals exhibit shape-dependent NRR electrocatalysis. The optimized Pt3Fe nanowires bounded with high-index facets exhibit excellent selectivity (no N2H4 is detected), high activity with NH3 yield of 18.3 μg h−1 mg−1cat (0.52 μg h−1 cm−2ECSA; ECSA: electrochemical active surface area) and Faraday efficiency of 7.3% at −0.05 V versus reversible hydrogen electrode, outperforming the {200} facet-enclosed Pt3Fe nanocubes and {111} facet-enclosed Pt3Fe nanorods. They also show good stability with negligible activity change after five cycles. Density functional theory calculations reveal that, with high-indexed facet engineering, the Fe-3d band is an efficient d-d coupling correlation center for boosting the Pt 5d-electronic exchange and transfer activities towards the NRR.  相似文献   

2.
Hollow nanoparticles with large specific surface area and high atom utilization are promising catalysts for the hydrogen evolution reaction (HER). We describe herein the design and synthesis of a series of ultra-small hollow ternary alloy nanostructures using a simple one-pot strategy. The same technique was demonstrated for hollow PtNiCu nanoparticles, hollow PtCoCu nanoparticles and hollow CuNiCo nanoparticles. During synthesis, the displacement reaction and oxidative etching played important roles in the formation of hollow structures. Moreover, our hollow PtNiCu and PtCoCu nanoparticles were single crystalline, with an average diameter of 5 nm. Impressively, ultra-small hollow PtNiCu nanoparticles, containing only 10% Pt, exhibited greater electrocatalytic HER activity and stability than a commercial Pt/C catalyst. The overpotential of hollow PtNiCu nanoparticles at 10 mA cm−2 was 28 mV versus reversible hydrogen electrode (RHE). The mass activity was 4.54 A mgPt−1 at −70 mV versus RHE, which is 5.62-fold greater than that of a commercial Pt/C system (0.81 A mgPt−1). Through analyses of bonding and antibonding orbital filling, density functional theory calculations demonstrated that the bonding strength of different metals to the hydrogen intermediate (H*) was in the order of Pt > Co > Ni > Cu. The excellent HER performance of our hollow PtNiCu nanoparticles derives from moderately synergistic interactions between the three metals and H*. This work demonstrates a new strategy for the design of low-cost and high-activity HER catalysts.  相似文献   

3.
Most metal–organic frameworks (MOFs) hardly maintain their physical and chemical properties after exposure to alkaline aqueous solutions, thus precluding their use as potential electrode materials for electrochemical energy storage devices. Here, we present the design and synthesis of a highly alkaline-stable metal oxide@MOF composite, Co3O4 nanocube@Co-MOF (Co3O4@Co-MOF), via a controllable and facile one-pot hydrothermal method under highly alkaline conditions. The obtained composite possesses exceptional alkaline stability, retaining its original structure in 3.0 M KOH for at least 15 days. Benefitting from the exceptional alkaline stability, unique structure, and larger surface area, the Co3O4@Co-MOF composite shows a specific capacitance as high as 1020 F g−1 at 0.5 A  g−1 and a high cycling stability with only 3.3% decay after 5000 cycles at 5 A g−1. The as-constructed solid-state flexible device exhibits a maximum energy density of 21.6 mWh cm−3.  相似文献   

4.
The two-electron reduction of molecular oxygen represents an effective strategy to enable the green, mild and on-demand synthesis of hydrogen peroxide. Its practical viability, however, hinges on the development of advanced electrocatalysts, preferably composed of non-precious elements, to selectively expedite this reaction, particularly in acidic medium. Our study here introduces 2H-MoTe2 for the first time as the efficient non-precious-metal-based electrocatalyst for the electrochemical production of hydrogen peroxide in acids. We show that exfoliated 2H-MoTe2 nanoflakes have high activity (onset overpotential ∼140 mV and large mass activity of 27 A g−1 at 0.4 V versus reversible hydrogen electrode), great selectivity (H2O2 percentage up to 93%) and decent stability in 0.5 M H2SO4. Theoretical simulations evidence that the high activity and selectivity of 2H-MoTe2 arise from the proper binding energies of HOO* and O* at its zigzag edges that jointly favor the two-electron reduction instead of the four-electron reduction of molecular oxygen.  相似文献   

5.
Applying metal organic frameworks (MOFs) in electrochemical systems is a currently emerging field owing to the rich metal nodes and highly specific surface area of MOFs. However, the problems for MOFs that need to be solved urgently are poor electrical conductivity and low ion transport. Here we present a facile in situ growth method for the rational synthesis of MOFs@hollow mesoporous carbon spheres (HMCS) yolk–shell-structured hybrid material for the first time. The size of the encapsulated Zeolitic Imidazolate Framework-67 (ZIF-67) is well controlled to 100 nm due to the spatial confinement effect of HMCS, and the electrical conductivity of ZIF-67 is also increased significantly. The ZIF@HMCS-25% hybrid material obtained exhibits a highly efficient oxygen reduction reaction activity with 0.823 V (vs. reversible hydrogen electrode) half-wave potential and an even higher kinetic current density (JK = 13.8 mA cm−2) than commercial Pt/C. ZIF@HMCS-25% also displays excellent oxygen evolution reaction performance and the overpotential of ZIF@HMCS-25% at 10 mA cm−2 is 407 mV. In addition, ZIF@HMCS-25% is further employed as an air electrode for a rechargeable Zn–air battery, exhibiting a high power density (120.2 mW cm−2 at 171.4 mA cm−2) and long-term charge/discharge stability (80 h at 5 mA cm−2). This MOFs@HMCS yolk–shell design provides a versatile method for the application of MOFs as electrocatalysts directly.  相似文献   

6.
The present study was designed to understand the cigarette smoking-induced alterations in hormones and the resulting changes in platelet serotonin (5-hydroxytryptamine, 5-HT) and monoamine oxidase (MAO-B) activity in chronic smokers. Human male volunteers aged 35 ± 8 years, were divided into two groups, namely controls and smokers (12 ± 2 cigarettes per day for 7–10 years). Results showed that cigarette smoking significantly (p < 0.05) elevated plasma triiodothyronine (T3), cortisol and testosterone levels with significant (p < 0.05) reduction in plasma tryptophan and thyroxin (T4). Moreover, smokers showed reduced platelet 5-HT levels and MAO-B activity. In smokers, plasma cortisol was negatively correlated with tryptophan (r = −0.386), platelet MAO-B (r = −0.264), and 5-HT (r = −0.671), and positively correlated with testosterone (r = 0.428). However, testosterone was negatively correlated with platelet MAO-B (r = −0.315), and 5-HT (r = −.419) in smokers. Further, smokers plasma T3 levels were negatively correlated with platelet MAO-B (r = −0.398), and 5-HT (r = −0.541), whereas T4 levels were positively correlated with platelet MAO-B (r = 0.369), and 5-HT (r = 0.454). In conclusion, our study showed that altered testosterone and cortisol levels may aggravate behavior, mood disturbances and symptoms of depression by decreasing platelet 5-HT and MAO-B activity in smokers.  相似文献   

7.
The multi-metallene with an ultrahigh surface area has great potential in precise tuning of surface heterogeneous d-electronic correlation by surface strain effect for the distinctive surface electronic structure, which is a brand new class of promising 2D electrocatalyst for sustainable energy device application. However, achieving such an atomically thin multi-metallene still presents a great challenge. Herein, we present a new synthetic method for an atomic-level palladium-iridium (PdIr) bimetallene with an average thickness of only ∼1.0 nm for achieving superior catalysis in the hydrogen evolution reaction (HER) and the formic acid oxidation reaction (FAOR). The curved PdIr bimetallene presents a top-ranked high electrochemical active area of 127.5 ± 10.8 m2 gPd+Ir−1 in the reported noble alloy materials, and exhibits a very low overpotential, ultrahigh activity and improved stability for HER and FAOR. DFT calculation reveals that the PdIr bimetallene herein has a unique lattice tangential strain, which can induce surface distortion while concurrently creating a variety of concave-convex featured micro-active regions formed by variously coordinated Pd sites agglomeration. Such a strong strain effect correlates the abnormal on-site active 4d10-t2g-orbital Coulomb correlation potential and directly elevates orbital-electronegativity exposure within these active regions, resulting in a preeminent barrier-free energetic path for significant enhancement of FAOR and HER catalytic performance.  相似文献   

8.
Resolving regional carbon budgets is critical for informing land-based mitigation policy. For nine regions covering nearly the whole globe, we collected inventory estimates of carbon-stock changes complemented by satellite estimates of biomass changes where inventory data are missing. The net land–atmospheric carbon exchange (NEE) was calculated by taking the sum of the carbon-stock change and lateral carbon fluxes from crop and wood trade, and riverine-carbon export to the ocean. Summing up NEE from all regions, we obtained a global ‘bottom-up’ NEE for net land anthropogenic CO2 uptake of –2.2 ± 0.6 PgC yr−1 consistent with the independent top-down NEE from the global atmospheric carbon budget during 2000–2009. This estimate is so far the most comprehensive global bottom-up carbon budget accounting, which set up an important milestone for global carbon-cycle studies. By decomposing NEE into component fluxes, we found that global soil heterotrophic respiration amounts to a source of CO2 of 39 PgC yr−1 with an interquartile of 33–46 PgC yr−1—a much smaller portion of net primary productivity than previously reported.  相似文献   

9.
Metal N-heterocyclic carbenes (M-NHCs) on the pore walls of a porous metal-organic framework (MOF) can be used as active sites for efficient organic catalysis. Traditional approaches that need strong alkaline reagents or insoluble Ag2O are not, however, suitable for the incorporation of NHCs on the backbones of MOFs because such reagents could destroy their frameworks or result in low reactivity. Accordingly, development of facile strategies toward functional MOFs with covalently bound M-NHCs for catalysis is needed. Herein, we describe the development of a general and facile approach to preparing MOFs with covalently linked active M-NHC (M = Pd, Ir) single-site catalysts by using a soluble Ag salt AgOC(CF3)3 as the source and subsequent transmetalation. The well-defined M-NHC-MOF (M = Pd, Ir) catalysts obtained in this way have shown excellent catalytic activity and stability in Suzuki reactions and hydrogen transfer reactions. This provides a general and facile strategy for anchoring functional M-NHC single-site catalysts onto functionalized MOFs for different reactions.  相似文献   

10.
In the past three decades, China has built more than 87 000 dams with a storage capacity of ≈6560 km3 and the total surface area of inland water has increased by 6672 km2. Leaching of N from fertilized soils to rivers is the main source of N pollution in China, but the exposure of a growing inland water area to direct atmospheric N deposition and N leaching caused by N deposition on the terrestrial ecosystem, together with increased N deposition and decreased N flow, also tends to raise N concentrations in most inland waters. The contribution of this previously ignored source of  N deposition to freshwaters is estimated in this study, as well as mitigation strategies. The results show that the annual amounts of N depositions ranged from 4.9 to 16.6 kg · ha−1 · yr−1 in the 1990s to exceeding 20 kg · ha−1 · yr−1 in the 2010s over most of regions in China, so the total mass of ΔN (the net contribution of N deposition to the increase in N concentration) for lakes, rivers and reservoirs change from 122.26 Gg N · yr−1 in the 1990s to 237.75 Gg N · yr−1 in the 2010s. It is suggested that reducing the N deposition from various sources, shortening the water-retention time in dams and decreasing the degree of regulation for rivers are three main measures for preventing a continuous increase in the N-deposition pollution to inland water in China.  相似文献   

11.
Azoxy-, azo- and amino-aromatics are among the most widely used building blocks in materials science pharmaceuticals and synthetic chemistry, but their controllable and green synthesis has not yet been well established. Herein, a facile potential-tuned electrosynthesis of azoxy-, azo- and amino-aromatics via aqueous selective reduction of nitroarene feedstocks over a CoP nanosheet cathode is developed. A series of azoxy-, azo- and amino-compounds with excellent selectivity, good functional group tolerance and high yields are produced by applying different bias input. The synthetically significant and challenging asymmetric azoxy-aromatics can be controllably synthesized in moderate to good yields. The use of water as the hydrogen source makes this strategy remarkably fascinating and promising. In addition, deuterated aromatic amines with a high deuterium content can be readily obtained by using D2O. By pairing with anodic oxidation of aliphatic amines to nitriles, synthetically useful building blocks can be simultaneously produced in a CoP||Ni2P two-electrode electrolyzer. Only 1.25 V is required to achieve a current density of 20 mA cm−2, which is much lower than that of overall water splitting (1.70 V). The paired oxidation and reduction reactions can also be driven using a 1.5 V battery to synthesize nitrile and azoxybenzene with good yields and selectivity, further emphasizing the flexibility and controllability of our method. This work paves the way for a promising approach to the green synthesis of valuable chemicals through potential-controlled electrosynthesis.  相似文献   

12.
It is highly desirable to design hollow structures with multi-scale functions by mimicking cells for the construction of micro/nanoreactors. Herein, we report the construction of hollow-structured submicrometer-photoreactors with bimetallic catalysts loaded within mesoporous silicas. The synthesis parameters are optimized to study the evolution of hollow structure through hydrothermal treatment and an ‘adhesive-contraction’ formation mechanism is proposed. AuPt@HMZS catalysts exhibited a broader absorbance region under visible light and the adsorption edge displayed a red-shift, indicating the strong metal–metal interactions at the alloy interface. The reaction performance of the coupled Au-Pt catalysts can be tuned to achieve excellent catalytic activity in cinnamyl alcohol oxidation to cinnamic acid for 3.1 mmol g−1 with 99% selectivity. The proposed strategy to build hollow structures as multifunctional micro/nanoreactors is promising for the design of high-performance and sustainable catalysts for chemical synthesis.  相似文献   

13.
Hydrothermal fluid is essential for transporting metals in the crust and mantle. To explore the potential of Cu isotopes as a tracer of hydrothermal-fluid activity, Cu-isotope fractionation factors between Cl-bearing aqueous fluids and silicate magmas (andesite, dacite, rhyolite dacite, rhyolite and haplogranite) were experimentally calibrated. Fluids containing 1.75–14 wt.% Cl were mixed together with rock powders in Au95Cu5 alloy capsules, which were equilibrated in cold-seal pressure vessels for 5–13 days at 800–850°C and 2 kbar. The elemental and Cu-isotopic compositions of the recovered aqueous fluid and solid phases were analyzed by (LA-) ICP–MS and multi-collector inductively coupled plasma mass spectrometry, respectively. Our experimental results show that the fluid phases are consistently enriched in heavy Cu isotope (65Cu) relative to the coexisting silicates. The Cu-isotope fractionation factor (Δ65CuFLUID-MELT) ranges from 0.08 ± 0.01‰ to 0.69 ± 0.02‰. The experimental results show that the Cu-isotopic fractionation factors between aqueous fluids and silicates strongly depend on the Cu speciation in the fluids (e.g. CuCl(H2O), CuCl2– and CuCl32−) and silicate melts (CuO1/2), suggesting that the exsolved fluids may have higher δ65Cu than the residual magmas. Our results suggest the elevated δ65Cu values in Cu-enriched rocks could be produced by addition of aqueous fluids exsolved from magmas. Together with previous studies on Cu isotopes in the brine and vapor phases of porphyry deposits, our results are helpful for better understanding Cu-mineralization processes.  相似文献   

14.
Complex oxides with tunable structures have many fascinating properties, though high-quality complex oxide epitaxy with precisely controlled composition is still out of reach. Here we have successfully developed solution-based single-crystalline epitaxy for multiferroic (1-x)BiTi(1-y)/2FeyMg(1-y)/2O3–(x)CaTiO3 (BTFM–CTO) solid solution in large area, confirming its ferroelectricity at the atomic scale with strong spontaneous polarization. Careful compositional tuning leads to a bulk magnetization of 0.07 ± 0.035 μB/Fe at room temperature, enabling magnetically induced polarization switching exhibiting a large magnetoelectric coefficient of 2.7–3.0 × 10−7 s/m. This work demonstrates the great potential of solution processing in large-scale complex oxide epitaxy and establishes novel room-temperature magnetoelectric coupling in epitaxial BTFM–CTO film, making it possible to explore a much wider space of composition, phase, and structure that can be easily scaled up for industrial applications.  相似文献   

15.
In early 2020, unprecedented lockdowns and travel bans were implemented in Chinese mainland to fight COVID-19, which led to a large reduction in anthropogenic emissions. This provided a unique opportunity to isolate the effects from emission and meteorology on tropospheric nitrogen dioxide (NO2). Comparing the atmospheric NO2 in 2020 with that in 2017, we found the changes of emission have led to a 49.3 ± 23.5% reduction, which was ∼12% more than satellite-observed reduction of 37.8 ± 16.3%. The discrepancy was mainly a result of changes of meteorology, which have contributed to an 8.1 ± 14.2% increase of NO2. We also revealed that the emission-induced reduction of NO2 has significantly negative correlations to human mobility, particularly that inside the city. The intra-city migration index derived from Baidu Location-Based-Service can explain 40.4% ± 17.7% variance of the emission-induced reduction of NO2 in 29 megacities, each of which has a population of over 8 million in Chinese mainland.  相似文献   

16.
The scalable and high-efficiency production of 2D materials is a prerequisite to their commercial use. Currently, only graphene and graphene oxide can be produced on a ton scale, and the inability to produce other 2D materials on such a large scale hinders their technological applications. Here we report a grinding exfoliation method that uses micro-particles as force intermediates to resolve applied compressive forces into a multitude of small shear forces, inducing the highly efficient exfoliation of layer materials. The method, referred to as intermediate-assisted grinding exfoliation (iMAGE), can be used for the large-scale production of many 2D materials. As an example, we have exfoliated bulk h-BN into 2D h-BN with large flake sizes, high quality and structural integrity, with a high exfoliation yield of 67%, a high production rate of 0.3 g h−1 and a low energy consumption of 3.01 × 106 J g−1. The production rate and energy consumption are one to two orders of magnitude better than previous results. Besides h-BN, this iMAGE technology has been used to exfoliate various layer materials such as graphite, black phosphorus, transition metal dichalcogenides, and metal oxides, proving its universality. Molybdenite concentrate, a natural low-cost and abundant mineral, was used as a demo for the large-scale exfoliation production of 2D MoS2 flakes. Our work indicates the huge potential of the iMAGE method to produce large amounts of various 2D materials, which paves the way for their commercial application.  相似文献   

17.
Lithium–sulfur batteries have great potential for high-performance energy-storage devices, yet the severe diffusion of soluble polysulfide to electrolyte greatly limits their practical applications. To address the above issues, herein we design and synthesize a novel polymer binder with single lithium-ion channels allowing fast lithium-ion transport while blocking the shuttle of unnecessary polysulfide anions. In situ UV–vis spectroscopy measurements reveal that the prepared polymer binder has effective immobilization to polysulfide intermediates. As expected, the resultant sulfur cathode achieves an excellent specific capacity of 1310 mAh g−1 at 0.2 C, high Coulombic efficiency of 99.5% at 0.5 C after 100 cycles and stable cycling performance for 300 cycles at 1 C (1 C = 1675 mA g−1). This study reports a new avenue to assemble a polymer binder with a single lithium-ion channel for solving the serious problem of energy attenuation of lithium–sulfur batteries.  相似文献   

18.
Molybdenum dinitrogen complexes supported by monodentate arylsilylamido ligand, [Ar(Me3Si)N]3MoN2Mg(THF)2[N(SiMe3)Ar] (5) and [Ar(Me3Si)N]3MoN2SiMe3 (6) (Ar = 3,5-Me2C6H3) were synthesized and structurally characterized, and proved to be effective catalysts for the disproportionation of cyclohexadienes and isomerization of terminal alkenes. The 1H NMR spectrum suggested that the bridging nitrogen ligand remains intact during the catalytic reaction, indicating possible catalytic ability of the Mo-N=N motif.  相似文献   

19.
Designing new cathodes with high capacity and moderate potential is the key to breaking the energy density ceiling imposed by current intercalation chemistry on rechargeable batteries. The carbonaceous materials provide high capacities but their low potentials limit their application to anodes. Here, we show that Fermi level tuning by p-type doping can be an effective way of dramatically raising electrode potential. We demonstrate that Li(Na)BCF2/Li(Na)B2C2F2 exhibit such change in Fermi level, enabling them to accommodate Li+(Na+) with capacities of 290–400 (250–320) mAh g−1 at potentials of 3.4–3.7 (2.7–2.9) V, delivering ultrahigh energy densities of 1000–1500 Wh kg−1. This work presents a new strategy in tuning electrode potential through electronic band structure engineering.  相似文献   

20.
As a non-invasive therapeutic method without penetration-depth limitation, magnetic hyperthermia therapy (MHT) under alternating magnetic field (AMF) is a clinically promising thermal therapy. However, the poor heating conversion efficiency and lack of stimulus–response obstruct the clinical application of magnetofluid-mediated MHT. Here, we develop a ferrimagnetic polyethylene glycol-poly(2-hexoxy-2-oxo-1,3,2-dioxaphospholane) (mPEG-b-PHEP) copolymer micelle loaded with hydrophobic iron oxide nanocubes and emodin (denoted as EMM). Besides an enhanced magnetic resonance (MR) contrast ability (r2 = 271 mM−1 s−1) due to the high magnetization, the specific absorption rate (2518 W/g at 35 kA/m) and intrinsic loss power (6.5 nHm2/kg) of EMM are dozens of times higher than the clinically available iron oxide nanoagents (Feridex and Resovist), indicating the high heating conversion efficiency. Furthermore, this composite micelle with a flowable core exhibits a rapid response to magnetic hyperthermia, leading to an AMF-activated supersensitive drug release. With the high magnetic response, thermal sensitivity and magnetic targeting, this supersensitive ferrimagnetic nanocomposite realizes an above 70% tumor cell killing effect at an extremely low dosage (10 μg Fe/mL), and the tumors on mice are completely eliminated after the combined MHT–chemotherapy.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号