首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 484 毫秒
1.
This paper aims to view the implications of an identification of wood species found during an archaeological excavation on a medieval church building and a surrounding graveyard at Thorarinsstadir in Seydisfjordur, east Iceland. The excavation in Seydisfjördur is a part of a project entitled ‘The transition from paganism to Christianity in Iceland’ sponsored by The East Iceland Heritage Museum, the Research Council of Iceland and The European Commission. It started in 1997 and from 1998 it has been a part of the PARABOW project, in the frame of the Raphael project. The project involves archaeological researches on pagan and Christian remains from the early medieval times in Iceland. The aim is to examine the origin and development of the Christian religion in Iceland. Furthermore, it is the intention to investigate how Christianity evolved alongside paganism assuming the conversion to Christianity was a long process, climaxing in the year 1000 when Christianity was adopted as a national religion. The wood identification uncovered evidence concerning church architecture, limiting actors for building traditions, Icelandersˈ ritual practices as well as their contacts with the foreign countries during the Viking Age and early medieval times. It did show that the native species were mainly used as fuel but drift timber was probably mainly used for construction purposes and for making coffins. According to the results from the wood identification, for instance, the excavation at Thorarinsstadir in Seydisfjördur revealed a wooden church made of drift timber.  相似文献   

2.
The influence of chemical treatments based on novel organic products on the consolidation of deteriorated wood by insect attack was evaluated on two hardwoods and one softwood: fir (Abies alba), beech (Fagus sylvatica) and deciduous oak (Quercus sp.). Degraded and intact specimens of the three wood species were impregnated with two different chemical treatments aimed to verify the potential synergic action of the novel products on wood. Then, the specimens were subjected to bending, compression parallel to the grain, impact, hardness and water absorption tests. Untreated specimens of the same botanical species, both degraded and non-degraded, were examined for comparison purposes. The experimental results showed a different effectiveness of the proposed chemical treatments to improve the mechanical and absorption properties of degraded wood. The most effective treatment was the one assuming the concurrent use of the studied novel consolidants. The species more susceptible of the enhancement in mechanical properties were fir and beech. The observed differentiations were most likely caused by the different structure of the botanical species considered, leading to a consequent different product penetration in the wood structure. The dimensional stability in terms of water repellent and antiswelling efficiency, after a three-month immersion in deionized water, was found to improve in all the treated wood specimens. Overall, experimental results showed that the impact of the chemical treatments was higher on degraded samples than on intact ones.  相似文献   

3.
This study is aimed at an assessment of the properties of two polymeric products applied to Norway spruce (Picea abies) and White poplar (Populus alba) wood species. It contributes to ongoing research experiments on the consolidating properties of two synthetic resins and their potential synergic action on wood, resulting from their different interaction with the substrate: Paraloid B72 and Regalrez 1126. Experiments were carried out on a series of samples of the two wood varieties. The consolidants were applied alone and one after the other, with one coat of Regalrez and then one of Paraloid. Porosity and variations in pore size distribution were ascertained by mercury intrusion porosimetry (MIP). Colorimetric and IR spectroscopic measurements were also taken before and after aging by solar radiation and freeze/thaw cycles, to verify the possible slowing of photodegradation of the treated wood and the consolidating resistance. Results confirm that both products penetrate the wood with a different behaviour. After double treatment with Regalrez + Paraloid, a significant advantage was observed in terms of mechanical resistance and pore size distribution, although no advantages as regards resistance to photo-oxidizing processes or colour changes were observed.  相似文献   

4.
A significant number of archaeological finds of the 13th–16th century from the Tuscan sites of Germagnana and Gambassi in Valdelsa—FI, was studied by different physico-chemical investigations (SEM–EDS, ICP, Mössbauer spectroscopy, XRD, XRF, TG-DTA) in order to contribute to clarify the production methodology and the pre-industrial glass manufacture technology. The studied samples are mainly non-vitreous finds as production waste, refractory materials, crucibles and raw materials; also vitreous finds as frits, skims, glasses (glass masses, glass working waste and finished products) have been taken into consideration. The obtained petrographic and physico-chemical data strongly suggest that both Gambassi and Germagnana glass manufactures were strictly connected with the sources of vitrifiable materials, situated in Tuscan sand quarries. In particular a comparison between sands from the neighbouring quarries and appropriate finds of the two archaeological sites evidences that the employed vitrifiable materials possibly belong to La Casina La Cava resort. The archaeological classification, based on macroscopic observation and stratigraphic position, was compared and verified with the scientific classification of the examined finds of Germagnana and Gambassi sites based on their composition, morphology and physico-chemical properties.  相似文献   

5.
Lead is commonly used for making small size organ-pipes instead of using tin alloys. In fact, when the organ-pipes are small enough to avoid collapsing due to room temperature creep, lead can be used instead of other alloys with superior mechanical properties, because it is relatively cheap, it is easy to form into different shapes, the tonality of the obtained sounds are acceptable and the corrosion resistance is quite good. However, organic substances such as organic acids released from the wood made support of the organ-pipes and organic contaminations of the air pumped through the pipes may lead to a rapid degradation of lead. In this study, the effect of organic acids, such as acetic acid, on the degradation of lead-made organ-pipes was investigated. Lead made specimens obtained from real organ-pipes were exposed to organic-acid rich environments and the induced degradation was monitored by means of electrochemical techniques. In literature, it was evidenced that the degradation promoted by the organic acids leads to the formation of lead oxides and carbonates characterized by a very high volume, which promotes a quick degradation of the lead specimens. The effect of different concentrations of acetic acid on the degradation rate of the organ pipes was investigated by means of electrochemical impedance spectroscopy (EIS). The effect of the acid concentration on the corrosion process occurring on lead surface was evaluated by means of cathodic and anodic polarization measurements in both aerated and degassed conditions. The morphology of the degradation products was investigated by means of SEM during exposure time in the aggressive environment.  相似文献   

6.
The aim of the work is to set up a methodological approach to verify the effectiveness of the treatments of decayed waterlogged archaeological wood and to point out the proper thermo-hygrometric conditions for its preservation after treatment. The treatments were performed on wood samples of maritime pine (Pinus pinaster Aiton), oak (Quercus sp. caducifolia), elm (Ulmus cf. minor) and strawberry tree (Arbutus unedo L.), obtained from stems pertaining to the original vegetation found in the excavation site of the Ancient Ships in Pisa (Italy), and dated from seventh century BC to second century AD The utilised products were: Polyethylene Glycols (PEG) of various molecular weights, a Polypropylene Glycol (PPG 425), Trehalose (α-D-glucopyranosyl-α-D-glucopyranoside), and their mixtures, and also a Hydroxypropylcellulose (Klucel). The main objective to be pursued by the treatments was considered the stabilisation of the original size and shape of samples. The various steps of this approach were: the execution of a preliminary diagnostic survey on untreated samples; the characterisation of treatment solutions ‘as such’ to establish the property to be monitored during the treatment; the evaluation of the main physical characteristics of wood after the treatment were determined. Among the latter, the coefficient of dimensional stability during the exposure to a series of selected thermo-hygrometric conditions and the retention of consolidants after the treatment. These two measurements allowed the definition of the ‘efficacy of a treatment’, φT, a new parameter firstly utilised in this work. It measures the stabilisation capability of the percent unit of retained product, and its value permits to put in evidence the consolidants that stabilise wood with the lowest amount of product. Conversely, it was not possible to measure the Anti-Shrink Efficiency (ASE), one of the most utilised parameters for the evaluation of treatments, because of the serious distortions and fractures observed in all the heavily degraded untreated samples.  相似文献   

7.
Ground wood cellulose paper exhibits a practicable cleaning laser fluence window during middle-UV radiation processing. In this case, a minimum dose volume density should be applied. However, cleaning of bleached cellulose paper is accompanied by strong yellowing and destruction. The presence of charcoal graphite particulates shows substantial influence on the yellowing with increasing coverage.  相似文献   

8.
Adobe is a construction technique that uses raw earth mixed and moulded to form sun-dried blocks to realize a bearing wall. The recent discovery of adobe walls belonging to a Republican domus sited in Suasa (Ancona, Italy) was the starting point of the present work. The research was developed through an experimental approach, in order to characterize the mechanical behavior of this type of walls: firstly some adobe blocks similar to the original ones were reproduced by using the soil directly came from the archaeological site near the adobe walls and adding straw to reduce hygrometric shrinkage and coarse sand, taken from a local quarry, as a stabilizer, as Romans were used to do. Then, after a seasoning period of 4 months, four adobe walls were produced to be tested by compression and shear. From compression tests, maximum strength, first cracking compression stress, Young modulus and breaking manner were evaluated. As well, compression results show a possible two-storey structure of the earthen Republican domus. In fact, it appears that the stress from the two-storey load analysis is lower than the first cracking compression stress. From the shear tests, a proportional law seems to regulate the relation between the maximum value of the mean tangential tensions and the vertical compression the sample is subjected to. This could be the starting point for a future seismic analysis.  相似文献   

9.
Metallographic features of ancient bronze artefacts often hide peculiar micro-chemical processes and corrosion behaviours, which are worth to be studied as they can provide conservators and archaeologists with valuable tools and information. It is widely documented that Chinese bronzes were cast and the way to adjust their properties was to change the alloy composition. In particular, addition of lead, which is insoluble in the bronze matrix, results in the formation of inclusions or globules, which undergo oxidation processes leading to their conversion into corrosion products. The mechanisms through which this occurs were still poorly investigated. The present work was conducted to further study the corrosion behaviour of high-leaded bronze, especially focusing on the behaviour of lead globules. To this aim, a collection of Chinese archaeological bronzes, showing intermediate steps of degradation, were selected and investigated. The use of combined microscopy-based, molecular and elemental, analytical techniques allowed the characterization as well as the precise location of corrosion products, thus enabling us to propose a degradation pathway basing on thermodynamic data provided by Pourbaix diagram. The achieved results will be useful for researchers involved in these kinds of studies to better interpret data obtained.  相似文献   

10.
The features of materials and of constructive techniques have been singled out and recorded through techniques already experimented in the archaeological field (stratigraphy and typologies comparisons); it led to determining the constructive history, the alterations and the restorations of the building on a wide scale which goes from the margin walling of the Arsenal to the colours of walls. Every single piece of the building can be associated to the general constructive history and can be representative of the whole body of materials and constructive techniques used in the different historical periods of construction and use of tesone 105.  相似文献   

11.
Damages to hypogeal archaeological monuments, caused by the growth of tree roots, are frequently reported in the city of Rome. Problems of compatibility between trees and underground structures may become complex in the case of historical gardens. The Jewish catacombs of Villa Torlonia show relevant conservation problems, some of them arising from damages due to root growth, and consolidating interventions seem to be urgent. Some species in the gardens, especially Ficus carica L., but also Quercus ilex L. and Pinus pinea L., have developed a strong root system, growing for many meters in lateral distance and for some meters vertically. The plants responsible for the various alterations were identified by their wood anatomy and a methodology to treat similar problems has been proposed. Data collected aim to avoid errors made in managing the plant cover of an archaeological site.  相似文献   

12.
A medieval wooden panel chamber was rediscovered during reconstruction of the Tetzelhouse in the Saxon town of Pirna. Ceiling and walls are made from 600-year-old fire wood panels fitted together. The complete removal of layers (limewash, plaster, glue and dirt) from the wall panels was the precondition for conservation of the wood panels and for the restoration of the wooden panel chamber. The cleaning was carried out with a pulsed Nd:YAG laser after basic investigation of ablation mechanisms of the layers on the old wood. All layers of the different materials were removed both from the normal surface and out of depressions and woodworm holes with a special range of laser parameters, without damaging the wood. Within this range of parameters the laser cleaning is a self-limiting process. The health hazard from emitted waste products were determined and checked with work place measurements. The laser cleaning of the wooden wall panels was completed in March 1999. A uniform visual impression of all panels was obtained with a warm wooden colour tone.  相似文献   

13.
The electrical resistivity tomography (ERT) represents one of the widely used geophysical techniques for the exploration of the subsurface. In the last few years, this method has been demonstrated to be an efficient reconnaissance tool not only for monitoring degradation status of walls and foundations of historical buildings, but also for imaging the spatial distribution of injected mortar, commonly employed for consolidation purposes. A 3D resistivity tomography survey was carried out on four selected wall portions of the historical church of Montepetriolo, Perugia, Central Italy. The obtained 3D resistivity distribution models before and after grouting provided suggestive images of the internal structure of the studied walls. Moreover, the spatial distribution of the zones being filled with mortar was determined quantitatively by scaling the post- to the preinjection resistivity values. Using a well known correlation between resistivity and porosity, established in the geophysical community, a further step towards a more quantitative assessment was attempted to indirectly determine the unit volumes of the injected mortar The obtained results were satisfactory and in some cases almost similar to the yard data. Furthermore, two flat-jack tests confirmed the local increment of the mechanical resistance of the studied left front (2) and right lateral (3) wall portions.  相似文献   

14.
Understanding the chemical and physical alteration in archaeological bones, occurred after burial, is very interesting for researchers. In this paper, we present a study on the diagenetic alteration of human archaeological bony tissues from Paestum (South Italy), by combining complementary spectroscopic techniques, such as solid-state nuclear magnetic resonance (NMR), infrared spectroscopy (IR), and X-ray diffraction. In particular, 13C nuclear magnetic resonance–cross polarization-magic angle spinning (13C NMR CP-MAS) spectroscopy allows to identify and discriminate the adsorbed calcite, that is a diagenetic contaminant, from the structural one of apatite and 1H NMR-MAS spectroscopy shows how the degradation of organic phase of collagen is related to the time. The NMR data are combined with crystalline index, measured by X-ray diffraction, and with the splitting factor obtained by infrared spectroscopy. Moreover, the evaluation of the relative content of biogenic structural carbonate and of diagenetic fluorine is reported.  相似文献   

15.
The procedures for making and applying a new family of high viscosity aqueous polymeric dispersions based on poly(vinyl alcohol)-borax (PVA-borax) matrices are presented. A specific system of this type has been used to remove an oxidized varnish coating from the surface of “Coronation of the Virgin with Saints”, a 15th century egg tempera painting on wood by Neri di Bicci (Florence, 1418–1492). FTIR spectra showed that the oxidized varnish was constituted of highly aged shellac resin. Good cleaning performance was attained when the liquid portion of the dispersion consisted of a mixture of water and acetone. Rheological investigations indicate that the acetone content does not affect the mechanical properties of the polymeric dispersion. Those mechanical properties permit easy removal of the cleaning agent simply by peeling it from the surface by means of a forceps or spatula once it has carried out its cleaning function. Optical microscopic and FTIR investigations show that the cleaning agent is able to remove the oxidized varnish coating from the surface of the Neri di Bicci painting without leaving detectable residues.  相似文献   

16.
Chinese ink stick has a long history and a special importance in the Chinese culture. For the first time, Pyrolysis Gas Chromatography and Mass Spectrometry (Py-GC/MS) was used to identify the materials in an ancient Chinese ink stick. Four types of constituents could be detected in the archaeological ink stick of the Eastern Jin period (317–420 AD): (1) borneol (Chinese name bing piàn); (2) compounds related to essential oil or tar of conifer wood: cedrene, aromadendrane, cedrane, cuparene, cedrol, retene, methyl dehydroabietate and 9-methyl retene; (3) marker compounds from animal glue; (4) polycyclic aromatic hydrocarbons (PAHs) from soot. The information obtained through this study provides conclusive evidence for use of additives of borneol and cedar oil, binding media of animal glue and pine wood soot in the ancient ink stick.  相似文献   

17.
The knowledge of the morphological and mechanical properties of masonry walls is very important for the refurbishment of ancient buildings, particularly when the requirements of both structural safety and historical preservation must be fulfilled. The masonry is not of homogenous material: its mechanical properties depend on stones, mortar, and texture which are very variable due to their dependence on the historical periods and the geographical area of the erection. For this reason, a deep knowledge of masonries built in different sites and historical periods is essential in order to evaluate both the capacities of bearing vertical load and the seismic vulnerability of the masonry structure. Three fundamental typologies of tuff masonry have been defined: they are the characteristics of different historical periods from the XVI to the XX century. The models are in full-scale in order to reproduce the three defined chronotypes. Original tuff stones quarried in the corresponding historical period, mortars similar to the original ones, reproduced according to ancient documents and original constructive techniques have been used for the construction of the specimens. Compression tests performed in displacement control have been carried out on the masonry models in order to determine the maximum resistance of the material and the corresponding strain, the ultimate strain and corresponding residual strength. In this paper, the procedure used for making the specimens and for experimentally evaluating the mechanical properties of post-medieval Neapolitan yellow tuff masonry are illustrated and the obtained results, even in terms of plastic capacity of these kinds of masonry, are reported.  相似文献   

18.
This paper deals with the comparative evaluation of different procedures of salt extraction designed for archaeological ceramics from submarine burial environments. The experimental work was carried out on a particular type of late-Roman cooking ware finds (Pantellerian ware) found in a shipwreck near the shoreline of the Island of Pantelleria (Sicily). The studied ceramic test-pieces were first recognised in terms of bulk characteristics (mineralogy, petrography and chemistry). SEM-EDS observation allowed verification of the presence of various secondary minerals at the surface and in the pore spaces formed after the prolonged permanence in seawater under oxidising or reducing conditions. Pore-size distribution was also determined in the same fragments that had been subjected to the salt extraction routines. Three salt extraction methods were tested: two methods based on diffusion processes (water immersion under stationary conditions and under mechanical stirring conditions) and one method based on both diffusive and advective processes (multiple packages of sepiolite). The obtained experimental data allowed us to identify strengths and weaknesses of the tested procedures with practical spin-off for archaeologists and restorers (efficiency, kinetics, compatibility with the ceramic substrate, costs and simplicity of use). Salt extraction under mechanical stirring was the most effective method and, for this reason, is suitable for laboratory fieldwork during or immediately after submarine archaeological excavations. Similar advantages are also intended for the preliminary treatments of the most precious findings prior to museum storage.  相似文献   

19.
Organic-inorganic materials to be used as hydrophobic consolidants for plasters were synthesized starting from an inorganic precursor (Tetraethoxysilane [TEOS]), added to a polysiloxane epoxy formulation and thermally cured with Ytterbium as acid catalyst. The TEOS reduces the viscosity of the resin, contributing to the mechanical properties of the film, without causing cracking. Solvents, that are harmful for workers and environment and show some drawbacks in the practice of restoration, were not used. The film properties and the formation of silica clusters were investigated. The products were applied by brush on plaster's samples and their compatibility and effectiveness were verified. Thanks to the organic content, the products penetrate deeply, are more stable to photo-oxidative degradation, and the hydrophobicity of the resin, provided by the silicone component, is not altered.  相似文献   

20.
Waterlogged wood samples of Ulmus sp. and Fraxinus sp. from the ancient harbor of Otranto in Southern Italy were radiocarbon dated by accelerator mass spectrometry (AMS) and examined for physical and chemical changes to assess the degree of degradation. The analyzed woods were dated to the 2nd half of the twelfth – 1st half of the thirteenth centuries AD. The results of all the used methods (maximum water content, basic density, shrinkage, XRD analysis and holocellulose content) indicated a low level of degradation in the inner part of the wooden find. The outer and middle part, on the other hand, showed a greater degradation level. An important result is the identification of a not homogeneous degradation in the different parts of the examined wooden block, which will affect the design of the consolidating treatment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号