首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 890 毫秒
1.
BackgroundLawsonia intracellularis remains a problem for the swine industry worldwide. Previously, we designed and obtained a vaccine candidate against this pathogen based on the chimeric proteins: OMP1c, OMP2c, and INVASc. These proteins formed inclusion bodies when expressed in E. coli, which induced humoral and cellular immune responses in vaccinated pigs. Also, protection was demonstrated after the challenge. In this study, we established a production process to increase the yields of the three antigens as a vaccine candidate.ResultsBatch and fed-batch fermentations were evaluated in different culture conditions using a 2 L bioreactor. A fed-batch culture with a modified Terrific broth medium containing glucose instead of glycerol, and induced with 0.75 mM IPTG at 8 h of culture (11 g/L of biomass) raised the volumetric yield to 627.1 mg/L. Under these culture conditions, plasmid-bearing cells increased by 10% at the induction time. High efficiency in cell disruption was obtained at passage six using a high-pressure homogenizer and a bead mill. The total antigen recovery was 64% (400 mg/L), with a purity degree of 70%. The antigens retained their immunogenicity in pigs, inducing high antibody titers.ConclusionsConsidering that the antigen production process allowed an increment of more than 70-fold, this methodology constitutes a crucial step in the production of this vaccine candidate against L. intracellularis.How to cite: Salazar S, Gutiérrez N, Sánchez O, et al. Establishment of a production process for a novel vaccine candidate against Lawsonia intracellularis. Electron J Biotechnol 2021.https://doi.org/10.1016/j.ejbt.2021.01.002  相似文献   

2.
BackgroundRhodotorula glutinis is capable of synthesizing numerous valuable metabolites with extensive potential industrial usage. This paper reports the effect of initial culture medium pH on growth and protein, lipid, and carotenoid biosynthesis by R. glutinis.ResultsThe highest biomass yield was obtained in media with pH 4.0–7.0, and the value after 72 h was 17.2–19.4 gd.w./L. An initial pH of the medium in the range of 4.0–7.0 has no significant effect on the protein (38.5–41.3 g/100 gd.w.), lipid (10.2–12.7 g/100 gd.w.), or carotenoid (191.7–202.9 μg/gd.w.) content in the biomass or on the profile of synthesized fatty acids and carotenoids. The whole pool of fatty acids was dominated by oleic (48.1–53.4%), linoleic (21.4–25.1%), and palmitic acids (13.0–15.8%). In these conditions, the yeast mainly synthesized torulene (43.5–47.7%) and β-carotene (34.7–38.6%), whereas the contribution of torularhodin was only 12.1–16.8%. Cultivation in medium with initial pH 3.0 resulted in a reduction in growth (13.0 gd.w./L) and total carotenoid (115.8 μg/gd.w.), linoleic acid (11.5%), and torularhodin (4.5%) biosynthesis.ConclusionThe different values of initial pH of the culture medium with glycerol and deproteinized potato wastewater had a significant effect on the growth and protein, lipid, and carotenoid biosynthesis by R. glutinis.  相似文献   

3.
BackgroundIn order to produce an effective callus in Echinacea purpurea L.; determination of the explant type and growth regulators that best respond to callus induction and the optimization of the culture conditions to increase the amount of caffeic acid derivatives (CADs) in the obtained callus. CADs contents of callus cultures of E. purpurea were evaluated by establishing an effective callus induction system in vitro.ResultsVarious medium containing different growth regulators were tested using leaf, petiole, cotyledon and root as the explants. The best callus development was achieved in MS medium with 1.0 mg l−1 2,4-D + 2.0 mg l−1 BAP in leaf, 1.0 mg l−1 NAA + 0.5 mg l−1 TDZ in petiole, 2.0 mg l−1 NAA + 1.0 mg l−1 TDZ in cotyledon and 0.5 mg l−1 NAA + 0.5 mg l−1 BAP in roots. Upon optimisation of callus growth, each type of explant was cultured for 4, 6, 8 and 10 weeks in medium for the analyses of caftaric acid, chlorogenic acid, caffeic acid and chicoric acid contents. The highest amounts of caftaric acid (4.11 mg/g) and chicoric acid (57.89 mg/g) were found from petiole explants and chlorogenic acid (8.83 mg/g) from root explants at the end of the 10-week culture time.ConclusionsAs a result of the present study, the production of caffeic acid derivatives was performed by providing the optimization of E. purpurea L. callus cultures. Effective and repeatable protocols established in this study may offer help for further studies investigating the production of caffeic acid derivatives in vitro.How to cite: Tanur Erkoyuncu M, Yorgancilar M. Optimization of callus cultures at Echinacea purpurea L. for the amount of caffeic acid derivatives. Electron J Biotechnol 2021;51. https://doi.org/10.1016/j.ejbt.2021.02.003.  相似文献   

4.
BackgroundHydroxycinnamic acids and some of their derivatives are molecules with interesting biological activities; for instance, hydroxylated hydroxycinnamic esters have proved to have antifungal properties, and thus the generation of these molecules is of industrial importance. In this study, the direct esterification capacity of the pure recombinant type B feruloyl esterase from Aspergillus terreus (AtFAE B) was evaluated by its ability to catalyze the synthesis of isobutyl o-coumarate, an interesting antifungal molecule. A ternary solvent system (isooctane/isobutanol/water) was employed to improve the synthesis of isobutyl o-coumarate, assessing different substrate concentrations, enzyme load, water percentages and pH and temperature values.ResultsAtFAE B showed the highest initial rate at 18% (v/v) isobutanol and 50 mM o-coumaric acid, 0.04 mg/ml of enzyme, 4% (v/v) water without buffer and 40°C. AtFAE B half-lives at 30°C, 40°C and 50°C were 16.5 h, 1.75 h and 3.5 min, respectively. Thus, we decided to evaluate the bioconversion yield at 30°C, where the enzyme showed the highest operational stability. At this temperature, we obtained a yield of ~80% after only 8 h of reaction, using a 78:18:4 isooctane:isobutanol:water ternary solvent system, with 50 mM of o-coumaric acid.ConclusionsUnder these improved conditions, the productivity was 1.06 g isobutyl o-coumarate/L*h with a biocatalyst yield of 209.6 kg isobutyl o-coumarate/kg free AtFAE B, demonstrating the promising potential of AtFAE B to accept the non-canonical o-coumaric acid as the substrate and to achieve the synthesis of isobutyl o-coumarate.How to cite: Vega-Rodríguez AD, Armendáriz-Ruiz MA, Grajales-Hernández DA, et al. Improved synthesis of the antifungal isobutyl o-coumarate catalyzed by the Aspergillus terreus type B feruloyl esterase. Electron J Biotechnol 2021;54. https://doi.org/10.1016/j.ejbt.2021.08.001  相似文献   

5.
BackgroundNonribosomal peptide synthases (NRPS) can synthesize functionally diverse bioactive peptides by incorporating nonproteinogenic amino acids, offering a rich source of new drug leads. The bacterium Escherichia coli is a well-characterized production host and a promising candidate for the synthesis of nonribosomal peptides, but only limited bioprocess engineering has been reported for such molecules. We therefore developed a medium and optimized process parameters using the design of experiments (DoE) approach.ResultsWe found that glycerol is not suitable as a carbon source for rhabdopeptide production, at least for the NRPS used for this study. Alternative carbon sources from the tricarboxylic acid cycle achieved much higher yields. DoE was used to optimize the pH and temperature in a stirred-tank reactor, revealing that optimal growth and optimal production required substantially different conditions.ConclusionsWe developed a chemically defined adapted M9 medium matching the performance of complex medium (lysogeny broth) in terms of product concentration. The maximum yield in the reactor under optimized conditions was 126 mg L-1, representing a 31-fold increase compared to the first shaking-flask experiments with M9 medium and glycerol as the carbon source. Conditions that promoted cell growth tended to inhibit NRPS productivity. The challenge was therefore to find a compromise between these factors as the basis for further process development.How to cite: Oestreich AM, Suli LI, Gerlach D. et al. Media development and process parameter optimization using statistical experimental designs for the production of nonribosomal peptides in Escherichia coli. Electron J Biotechnol 2021;52. https://doi.org/10.1016/j.ejbt.2021.05.001  相似文献   

6.
BackgroundCurrently, microbial fermentation method has become the research hotspot for acetoin production. In our previous work, an acetoin-producing strain, Bacillus subtilis SF4-3, was isolated from Japanese traditional fermented food natto. However, its conversion of glucose to acetoin was relatively low. In order to achieve a high-efficient accumulation of acetoin in B. subtilis SF4-3, main medium components and fermentation conditions were evaluated in this work.ResultsThe by-products analysis showed that there existed reversible transformation between acetoin and 2,3-butanediol that was strictly responsible for acetoin production in B. subtilis SF4-3. The carbon sources, nitrogen sources and agitation speed were determined to play crucial role in the acetoin production. The optimal media (glucose·H2O 150 g/L, yeast extract 10 g/L, corn steep dry 5 g/L, urea 2 g/L, K2HPO4 0.5 g/L, MgSO4 0.5 g/L) were obtained. Furthermore, the low agitation speed of 300 r/min was found to be beneficial to the reversible transformation of 2,3-butanediol for acetoin production in B. subtilis SF4-3. Eventually, 48.9 g/L of acetoin and 5.5 g/L of 2,3-butanediol were obtained in a 5-L fermenter, and the specific production of acetoin was 39.12% (g/g), which accounted for 79.90% of the theoretical conversion.ConclusionsThe results indicated acetoin production of B. subtilis SF4-3 was closely related to the medium components and dissolved oxygen concentrations. It also provided a method for acetoin production via the reversible transformation of acetoin and 2,3-butanediol.  相似文献   

7.
BackgroundThis study aimed to produce carotenoids of two bacterial strains obtained and isolated from Caatinga soil in Northeastern Brazil and to evaluate their antioxidant and photoprotective activities. The morphological identification of bacteria was performed by Gram staining and molecularly confirmed through the 16S rRNA gene. The production of carotenoids was performed on two 23 factorial designs to analyze the influence of independent variables (temperature range, luminosity, agitation, spiral presence, and bacterial isolate type) for maximum carotenoid yield. The selected condition has been transferred to a bioreactor (10L). The identification of carotenoids was performed by liquid chromatography (HPLC) and mass spectrometry (LC-MS). Antioxidant activity was determined by inhibiting the β-carotene/linoleic acid system and the effectiveness as sunscreen was measured through its sun protection factor (SPF).ResultsThe results revealed that the isolates FT-7.22 and FT-5.12 were identified as Kocuria palustris; producers of a rare C50 carotenoid sarcinaxanthin. This is the first report on the production of carotenoids by this species from the Caatinga Domain. The pigment that was obtained from the Tryptic Soy Broth (TSB) medium in the best conditions of the factorial designs (increased agitation, aeration, and light exposure) exhibited a significant increase in the carotenoid production. The isolated FT-7.22 reached a higher sarcinaxanthin concentration (112,480 μg/L), and it exhibited promising antioxidant (76.53 ± 0.09%) and photoprotective activities (SPF = 9.36 ± 0.52).ConclusionsThis study demonstrated the ability of K. palustris to produce carotenoid sarcinaxanthin with antioxidant and photoprotective activities so that it can be applied in cosmetic formulations.How to cite: Mendes-Silva TCD, Vidal EE, de Souza RFR, et al. Production of carotenoid sarcinaxanthin by Kocuria palustris isolated from Northeastern Brazil Caatinga soil and their antioxidant and photoprotective activities. Electron J Biotechnol 2021;53. https://doi.org/10.1016/j.ejbt.2021.05.004  相似文献   

8.
9.
BackgroundAn efficient regeneration protocol is a priority for the successful application of plant biotechnology. Grape nodal explants were used to develop a micropropagation protocol for Thompson Seedless and Taify cvs. Explants were cultured on MS medium supplemented with Kinetin or benzylaminopurine (BA) and indolebutyric acid (IBA).ResultsFor both cultivars, axillary buds were grown, only, on a medium enriched with kinetin, moreover, shoot tip necrosis and callus formation were observed on Thompson Seedless cv. cultures grown on a medium with BA. Supplementing the growth medium with 100 mM (boron) B and 2.5 mM (calcium) Ca successfully help overcome these phenomena. The highest regenerated shoot numbers (14 and 6.2 explant−1) for Taify and Thompson Seedless cvs., respectively, were on media supplemented with 13.2 µM BA + 4.9 µM IBA and BA 13.2 µM + 5.8 µM IBA, respectively. Moreover, these media supported the developing shoots to have the heaviest dry weights (1.46 and 0.72 mg explant−1) for Taify and Thompson Seedless cvs., respectively. Thompson Seedless cv. regenerated shoot numbers and their dry weights were significantly increased by increasing the MS medium PO4 concentration. However, these two parameters were significantly decreased for Taify cv. Developing shoots were elongated and rooted on MS medium enriched with 4.9 µM, IBA 100 mM B and 2.5 mM Ca. Plantlets were acclimatized and successfully transferred to the greenhouse conditions.ConclusionsA novel promising protocol for Thomson Seedless and Taify cvs. micropropagation using single nodes has been developed.How to cite: Al-Aizari AA, Al-Obeed RS, Mohamed MA-H. Improving micropropagation of some grape cultivars via boron, calcium and phosphate. Electron J Biotechnol 2020;49. https://doi.org/10.1016/j.ejbt.2020.10.001  相似文献   

10.
BackgroundPlant tissue culture involves the use of explants obtained from plants to induce organogenesis with the help of plant growth regulators (PGRs). Micropropagation techniques provide a faster and economical solution to the limitations associated with traditional methods of plant cultivation. The present study focuses on the multiple shoot induction and proliferation of Ficus carica var. Black Jack. Factors that influence the growth of in vitro multiple shoots on the apical buds, which include growth media and PGRs, were investigated in this study. Different concentrations of cytokinins like 6-benzylaminopurine (BAP), Thidiazuron (TDZ), and Kinetin (Kin) were used on woody plant medium (WPM) for the optimization of media for multiple shoot induction and proliferation.ResultsApical buds of Ficus carica var. Black Jack growing in WPM supplemented with BAP produced the healthiest plantlets, with the highest number of multiple shoots. The most efficient medium composition which produced the highest number of multiple shoots (37.8) per growing explant was WPM supplemented with 20 µM BAP. Proliferated multiple shoots were efficiently rooted using WPM + 20 µM BAP + 8 µM indole-3-acetic acid (IAA). This optimized medium composition significantly enhanced the production of multiple, disease-free plantlets using single apical bud explants of Ficus carica var. Black Jack.ConclusionsIn the present study the observations indicate that WPM supplemented with 20 µM BAP is the best-suited medium for organogenesis and multiple shoot culture of Ficus carica var. Black Jack, and this technique can be potentially applied for commercialization of the plant.How to cite: Parab AR, Chew BL, Yeow LC, et al. Organogenesis on apical buds in common fig (Ficus carica) var. Black Jack. Electron J Biotechnol 2021;54. https://doi.org/10.1016/j.ejbt.2020.01.010  相似文献   

11.
BackgroundFermentation process development has been very important for efficient ethanol production. Improvement of ethanol production efficiency from sweet sorghum juice (SSJ) under normal gravity (NG, 160 g/L of sugar), high gravity (HG, 200 and 240 g/L of sugar) and very high gravity (VHG, 280 and 320 g/L of sugar) conditions by nutrient supplementation and alternative feeding regimes (batch and fed-batch systems) was investigated using a highly ethanol-tolerant strain, Saccharomyces cerevisiae NP01.ResultsIn the batch fermentations without yeast extract, HG fermentation at 200 g/L of sugar showed the highest ethanol concentration (PE, 90.0 g/L) and ethanol productivity (QE, 1.25 g/L·h). With yeast extract supplementation (9 g/L), the ethanol production efficiency increased at all sugar concentrations. The highest PE (112.5 g/L) and QE (1.56 g/L·h) were observed with the VHG fermentation at 280 g/L of sugar. In the fed-batch fermentations, two feeding regimes, i.e., stepwise and continuous feedings, were studied at sugar concentrations of 280 g/L. Continuous feeding gave better results with the highest PE and QE of 112.9 g/L and 2.35 g/L·h, respectively, at a feeding time of 9 h and feeding rate of 40 g sugar/h.ConclusionsIn the batch fermentation, nitrogen supplementation resulted in 4 to 32 g/L increases in ethanol production, depending on the initial sugar level in the SSJ. Under the VHG condition, with sufficient nitrogen, the fed-batch fermentation with continuous feeding resulted in a similar PE and increased QP by 51% compared to those in the batch fermentation.  相似文献   

12.
BackgroundLarge amounts of β-alanine are required in fine chemical and pharmaceutical synthesis and other fields. Profitable and green methods are required for the industrial production of β-alanine.ResultsReplacing endogenous panD of Escherichia coli with heterologous CgpanD from Corynebacterium glutamicum enabled β-alanine synthesis of 0.67 g/L by strain B0016-082BB. Overexpressing CgpanD on both plasmids and chromosomes to enhance the rate-limiting step improved the β-alanine titer to 4.25 g/L in strain B0016-083BB/pPL451-panD with a slighter metabolic burden. Growth factors were introduced by addition of yeast extract, and 6.65 g/L of β-alanine was synthesized by strain B0016-083BB/pPL451-panD in the M9-3Y medium.ConclusionsEnhancement of the rate-limiting steps in the β-alanine biosynthetic pathway, recruitment of the temperature-sensitive inducible pL promoter, and optimization of the fermentation process could efficiently increase β-alanine production in E. coli.How to cite: Xua J, Zhua Y, Zhou Z. Systematic engineering of the rate-limiting step of β-alanine biosynthesis in Escherichia col. Electron J Biotechnol 2021;51. https://doi.org/10.1016/j.ejbt.2021.03.002.  相似文献   

13.
BackgroundBiosurfactants are surface active molecules produced by microorganisms which have the ability to disrupt the plasma membrane. Biosurfactant properties are important in the food, pharmaceutical and oil industries. Lactic acid bacteria can produce cell-bound and excreted biosurfactants.ResultsThe biosurfactant-producing ability of three Lactobacillus strains was analyzed, and the effects of carbon and nitrogen sources and aeration conditions were studied. The three species of lactobacillus evaluated were able to produce biosurfactants in anaerobic conditions, which was measured as the capacity of one extract to reduce the surface tension compared to a control. The decreasing order of biosurfactant production was L. plantarum>Lactobacillus sp.>L. acidophilus. Lactose was a better carbon source than glucose, achieving a 23.8% reduction in surface tension versus 12.9% for glucose. Two complex nitrogen sources are required for growth and biosurfactant production. The maximum production was reached at 48 h under stationary conditions. However, the highest level of production occurred in the exponential phase. Biosurfactant exhibits a critical micelle concentration of 0.359 ± 0.001 g/L and a low toxicity against E. coli. Fourier transform infrared spectroscopy indicated a glycoprotein structure. Additionally, the kinetics of fermentation were modeled using a logistic model for the biomass and the product, achieving a good fit (R2 > 0.9).ConclusionsL. plantarum derived biosurfactant production was enhanced using adequate carbon and nitrogen sources, the biosurfactant is complex in structure and because of its low toxicity could be applied to enhance cell permeability in E. coli.How to cite: Montoya Vallejo C, Florez Restrepo MA, Guzmán Duque FL, et al. Production, characterization and kinetic model of biosurfactant produced by lactic acid bacteria. Electron J Biotechnol 2021;53. https://doi.org/10.1016/j.ejbt.2021.06.001  相似文献   

14.
BackgroundThe selection of new yeast strains could lead to improvements in bioethanol production. Here, we have studied the fermentative capacity of different auxotrophic mutants of Saccharomyces cerevisiae, which are routinely used as hosts for the production of heterologous proteins. It has recently been found that these strains exhibit physiological alterations and peculiar sensitivities with respect to the parental prototrophic strains from which they derive. In this work the performance of auxotrophic S. cerevisiae CEN.PK strains was compared to the corresponding prototrophic strain, to S. cerevisiae T5bV, a strain isolated from grape must and to another auxotrophic strain, S. cerevisiae BY4741.ResultsThe results indicate that the fermentative capacity of strains grown in 2% glucose was similar in all the strains tested. However, in 15% initial glucose, the auxotrophic strains exhibited a more than doubled ethanol yield on biomass (10 g g- 1dw) compared to the prototrophic strains (less than 5 g g- 1dw). Other tests have also evidenced that in medium depletion conditions, ethanol production continues after growth arrest.ConclusionsThe results highlight the capacity of auxotrophic yeast strains to produce ethanol per mass unit, in a higher amount with respect to the prototrophic ones. This leads to potential applications for auxotrophic strains of S. cerevisiae in the production of ethanol in both homogeneous and heterogeneous phases (immobilized systems). The higher ethanol yield on biomass would be advantageous in immobilized cell systems, as a reduced yeast biomass could greatly reduce the mass transfer limitations through the immobilization matrix.  相似文献   

15.
BackgroundSynthesis of selenium nanoparticles from selenite by Shewanella sp. HN-41 demonstrated that particle size depended on the reaction time and biomass of cells. The slow reaction and low biomass tended to form small particles. In this study, Shewanella sp. HN-41 was introduced into the anode of a nonexternal circuit bioelectrochemical system (nec_BES) to convert chemical energy from lactate to low electron current to the cathode, where selenite was reduced.ResultsOur experiment with two systems, one bioelectrochemical system with a cathode flushed with nitrogen and the other with a no-nitrogen-flushing cathode, showed that the former could not produce Se nanoparticles after 21 d, but the latter formed them with an average size of 37.7 nm. The SEM and TEM images demonstrated that the particle size of 10 nm occupied over 10% and most of the particles were in the range of 30–60 nm. The XRD result and SAED image demonstrated no clear peaks of crystal and proved that the Se nanoparticles are amorphous.ConclusionsThe clean Se nanoparticles were synthesized and completely separated from bacterial cells in the bioelectrochemical system. This study opened a new approach for the biological synthesis of metal nanoparticles. Finally, the Se products in the range of 30–60 nm can be tested for antimicrobial activities in medical applications.How to cite: Ho CT, Nguyen T-H, Lam T-T, et al. Biogenic synthesis of selenium nanoparticles by Shewanella sp. HN-41 using a modified bioelectrochemical system. Electron J Biotechnol 2021;54. https://doi.org/10.1016/j.ejbt.2021.07.004  相似文献   

16.
BackgroundBiohydrogen effluent contains a high concentration of volatile fatty acid (VFA) mainly as butyric, acetic, lactic and propionic acids. The presence of various VFAs (mixture VFAs) and their cooperative effects on two-stage biohythane production need to be further studied. The effect of VFA concentrations in biohydrogen effluent of palm oil mill effluent (POME) on methane yield in methane stage of biohythane production was investigated.ResultsThe methane yield obtained in low VFA loading (0.9 and 1.8 g/L) was 15–20% times greater than that of high VFA loading (3.6 and 4.7 g/L). Butyric acid at high concentrations (8 g/L) has the individual significantly negative effect the methane production process (P < 0.05). Lactic, acetic and butyric acid mixed with propionic acid at a concentration higher than 0.5 g/L has an interaction significantly negative effect on the methanogenesis process (P < 0.05). Inhibition condition had a negative effect on both bacteria and archaea with inhibited on Geobacillus sp., Thermoanaerobacterium thermosaccharolyticum, Methanoculleus thermophilus and Methanothermobacter delfuvii resulting in low methane yield.ConclusionPreventing the high concentration of butyric acid, and propionic acid in the hydrogenic effluent could enhance methane production in two-stage anaerobic digestion for biohythane production.  相似文献   

17.
BackgroundGABA (γ-aminobutyric acid) is a four-carbon nonprotein amino acid that has hypotensive, diuretic, and tranquilizing properties. Glutamate decarboxylase (GAD) is the key enzyme to generate GABA. A simple and economical method of preparing and immobilizing GAD would be helpful for GABA production. In this study, the GAD from Lactobacillus fermentum YS2 was expressed under the control of a stress-inducible promoter and was purified and immobilized in a fusion form, and its reusability was investigated.ResultsThe fusion protein CBM-GAD was expressed in Escherichia coli DH5α carrying pCROCB-gadB, which contained promoter PrpoS, cbm3 (family 3 carbohydrate-binding module from Clostridium thermocellum) coding sequence, the gadB gene from L. fermentum YS2 coding for GAD, and the T7 terminator. After a one-step purification of CBM-GAD using regenerated amorphous cellulose (RAC) as an adsorbent, SDS-PAGE analysis revealed a clear band of 71 kDa; the specific activity of the purified fusion protein CBM-GAD reached 83.6 ± 0.7 U·mg-1. After adsorption onto RAC, the immobilized GAD with CBM3 tag was repeatedly used for GABA synthesis. The protein-binding capacity of RAC was 174 ± 8 mg·g-1. The immobilized CBM-GAD could repeatedly catalyze GABA synthesis, and 8% of the initial activities was retained after 10 uses. We tested the conversion of monosodium glutamate to GABA by the immobilized enzyme; the yield reached 5.15 g/L and the productivity reached 3.09 g/L·h.ConclusionsRAC could be used as an adsorbent in one-step purification and immobilization of CBM-GAD, and the immobilized enzyme could be repeatedly used to catalyze the conversion of glutamate to GABA.  相似文献   

18.
BackgroundThe effect of diverse oxygen transfer coefficient on the l-erythrulose production from meso-erythritol by a newly isolated strain, Gluconobacter kondonii CGMCC8391 was investigated. In order to elucidate the effects of volumetric mass transfer coefficient (kLa) on the fermentations, baffled and unbaffled flask cultures, and fed-batch cultures were developed in present work.ResultsWith the increase of the kLa value in the fed-batch culture, l-erythrulose concentration, productivity and yield were significantly improved, while cell growth was not the best in the high kLa. Thus, a two-stage oxygen supply control strategy was proposed, aimed at achieving high concentration and high productivity of l-erythrulose. During the first 12 h, kLa was controlled at 40.28 h-1 to obtain high value for cell growth, subsequently kLa was controlled at 86.31 h-1 to allow for high l-erythrulose accumulation.ConclusionsUnder optimal conditions, the l-erythrulose concentration, productivity, yield and DCW reached 207.9 ± 7.78 g/L, 6.50 g/L/h, 0.94 g/g, 2.68 ± 0.17 g/L, respectively. At the end of fermentation, the l-erythrulose concentration and productivity were higher than those in the previous similar reports.  相似文献   

19.
BackgroundThe production of biofuels from renewable energy sources is one of the most important issues in industrial biotechnology today. The process is known to generate various by-products, for example crude glycerol, which is obtained in the making of biodiesel from rapeseed oil. Crude glycerol may be utilized in many ways, including microbial conversion to 1,3-propanediol (1,3-PD), a raw material for the synthesis of polyesters and polyurethanes.ResultsThe paper presents results of a study on the synthesis of 1,3-propanediol from crude glycerol by a repeated batch method with the use of Clostridium butyricum DSP1. Three cycles of fermentation medium replacement were carried out. The final concentration of 1,3-PD was 62 g/L and the maximum productivity, obtained during the second cycle, reached 1.68 g/L/h. Additionally, experiments conducted in parallel to the above involved using the entire quantity of the culture broth removed from the bioreactor to inoculate successive portions of fermentation media containing crude glycerol at concentrations of 80 g/L and 100 g/L. Under those conditions, the maximum 1,3-PD concentrations were 43.2 g/L and 54.2 g/L.ConclusionsThe experiments proved that by using a portion of metabolically active biomass as inoculum for another fermentation formula it is possible to eliminate the stage of inoculum growth and thereby reduce the length of the whole operation. Additionally, that strategy avoids the phase of microbial adaptation to a different source of carbon such as crude glycerol, which is more difficult to utilize, thus improving the kinetic parameters of 1,3-PD production.  相似文献   

20.
BackgroundMilk whey, a byproduct of the dairy industry has a negative environmental impact, can be used as a raw material for added-value compounds such as galactooligosaccharides (GOS) synthesis by β-galactosidases.ResultsB-gal42 from Pantoea anthophila strain isolated from tejuino belonging to the glycosyl hydrolase family GH42, was overexpressed in Escherichia coli and used for GOS synthesis from lactose or milk whey. Crude cell-free enzyme extracts exhibited high stability; they were employed for GOS synthesis reactions. In reactions with 400 g/L lactose, the maximum GOS yield was 40% (w/w) measured by HPAEC-PAD, corresponding to 86% of conversion. This enzyme had a strong predilection to form GOS with β(1 → 6) and β(1 → 3) galactosyl linkages. Comparing GOS synthesis between milk whey and pure lactose, both of them at 300 g/L, these two substrates gave rise to a yield of 38% (60% of lactose conversion) with the same product profile determined by HPAEC-PAD.ConclusionsB-gal42 can be used on whey (a cheap lactose source) to produce added value products such as galactooligosaccharides.How to cite: Yañez-Ñeco CV, Cervantes FV, Amaya-Delgado L, et al. Synthesis of β(1→3) and β(1→6) galactooligosaccharides from lactose and whey using a recombinant β-galactosidase from Pantoea anthophila. Electron J Biotechnol 2021;49. https://dx.doi.org/10.1016/j.ejbt.2020.10.004  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号