共查询到20条相似文献，搜索用时 203 毫秒
1.
Understanding the mechanical properties of optically transparent polydimethylsiloxane (PDMS) microchannels was essential to the design of polymer-based microdevices. In this experiment, PDMS microchannels were filled with a 100 μM solution of rhodamine 6G dye at very low Reynolds numbers (∼10−3). The deformation of PDMS microchannels created by pressure-driven flow was investigated by fluorescence microscopy and quantified the deformation by the linear relationship between dye layer thickness and intensity. A line scan across the channel determined the microchannel deformation at several channel positions. Scaling analysis widely used to justify PDMS bulging approximation was allowed when the applied flow rate was as high as 2.0 μl/min. The three physical parameters (i.e., flow rate, PDMS wall thickness, and mixing ratio) and the design parameter (i.e., channel aspect ratio = channel height/channel width) were considered as critical parameters and provided the different features of pressure distributions within polymer-based microchannel devices. The investigations of the four parameters performed on flexible materials were carried out by comparison of experiment and finite element method (FEM) results. The measured Young''s modulus from PDMS tensile test specimens at various circumstances provided reliable results for the finite element method. A thin channel wall, less cross-linker, high flow rate, and low aspect ratio microchannel were inclined to have a significant PDMS bulging. Among them, various mixing ratios related to material property and aspect ratios were one of the significant factors to determine PDMS bulging properties. The measured deformations were larger than the numerical simulation but were within corresponding values predicted by the finite element method in most cases. 相似文献
2.
The study investigates the use of CO2 laser to induce glass strip peeling off to form microchannels on soda lime gass substrate. The strip peeling exhibits a strong dependence on the energy deposition rate on the glass surface. In spite of the vast difference in the combination of laser power and scanning speed, when the ratio of the two makes the energy deposition rate in the range 3.0-6.0 J/(cm2 s), the temperature rising inside glass will be above the strain point and reach the softening region of the glass. As a result, glass strip peeling is able to occur and form microchannels with dimensions of 20-40 μm in depth and 200-280 μm in width on the glass surface. Beyond this range, higher energy depsotion rate would lead to surface melting associated with solidification cracks and lower energy deposition rate causes the generation of fragment cracks. 相似文献
3.
In situ pressure measurement within deformable rectangular polydimethylsiloxane microfluidic devices
In this paper, we present a simple procedure to incorporate commercially available external pressure transducers into existing microfluidic devices, to monitor pressure-drop in real-time, with minimal design modifications to pre-existing channel designs. We focus on the detailed fabrication steps and assembly to make the process straightforward and robust. The work presented here will benefit those interested in adding pressure drop measurements in polydimethylsiloxane (PDMS) based microchannels without having to modify existing channel designs or requiring additional fabrication steps. By using three different devices with varying aspect ratio channels (, width/depth), we demonstrate that our approach can easily be adapted into existing channel designs inexpensively. Furthermore, our approach can achieve steady state measurements within a matter of minutes (depending on the fluid) and can easily be used to investigate dynamic pressure drops. In order to validate the accuracy of the measured pressure drops within the three different aspect ratio devices, we compared measured pressure drops of de-ionized water and a 50 wt. % glycerol aqueous solution to four different theoretical expressions. Due to the deformability of PDMS, measured pressure drops were smaller than those predicted by the rigid channel theories (plate and rectangular). Modification of the rigid channel theories with a deformability parameter α provided better fits to the measured data. The elastic rectangular expression developed in this paper does not have a geometric restriction and is better suited for microchannels with a wider range of aspect ratios. 相似文献
4.
Recently, we have reported the experimental results of DNA stretching by flow field in three microchannels (C. H. Lee and C. C. Hsieh, Biomicrofluidics 7(1), 014109 (2013)) designed specifically for the purpose of preconditioning DNA conformation for easier stretching. The experimental results do not only demonstrate the superiority of the new devices but also provides detailed observation of DNA behavior in complex flow field that was not available before. In this study, we use Brownian dynamics-finite element method (BD-FEM) to simulate DNA behavior in these microchannels, and compare the results against the experiments. Although the hydrodynamic interaction (HI) between DNA segments and between DNA and the device boundaries was not included in the simulations, the simulation results are in fairly good agreement with the experimental data from either the aspect of the single molecule behavior or from the aspect of ensemble averaged properties. The discrepancy between the simulation and the experimental results can be explained by the neglect of HI effect in the simulations. Considering the huge savings on the computational cost from neglecting HI, we conclude that BD-FEM can be used as an efficient and economic designing tool for developing new microfluidic device for DNA manipulation. 相似文献
5.
A porous silicon (PSi) based microarray has been integrated with a microfluidic system, as a proof of concept device for the optical monitoring of selective label-free DNA-DNA interaction. A 4 × 4 square matrix of PSi one dimensional photonic crystals, each one of 200 μm diameter and spaced by 600 μm, has been sealed by a polydimethylsiloxane (PDMS) channels circuit. The PSi optical microarray elements have been functionalized by DNA single strands after sealing: the microfluidic circuit allows to reduce significantly the biologicals and chemicals consumption, and also the incubation time with respect to a not integrated device. Theoretical calculations, based on finite element method, taking into account molecular interactions, are in good agreement with the experimental results, and the developed numerical model can be used for device optimization. The functionalization process and the interaction between DNA probe and target has been monitored by spectroscopic reflectometry for each PSi element in the microchannels. 相似文献
6.
This paper presents a study of electrokinetic transport in single nanopores integrated into vertically stacked three-dimensional hybrid microfluidic∕nanofluidic structures. In these devices, single nanopores, created by focused ion beam (FIB) milling in thin polymer films, provide fluidic connection between two vertically separated, perpendicular microfluidic channels. Experiments address both systems in which the nanoporous membrane is composed of the same (homojunction) or different (heterojunction) polymer as the microfluidic channels. These devices are then used to study the electrokinetic transport properties of synthetic (i.e., polystyrene sulfonate and polyallylamine) and biological (i.e., DNA) polyelectrolytes across these nanopores using both electrical current measurements and confocal microscopy. Both optical and electrical measurements indicate that electro-osmotic transport is predominant over electrophoresis in single nanopores with d>180 nm, consistent with results obtained under similar conditions for nanocapillary array membranes. 相似文献
7.
Chang-Zheng Yuan 《国家科学评论(英文版)》2021,8(11)
Charmonium is a bound state of a charmed quark and a charmed antiquark, and a charmoniumlike state is a resonant structure that contains a charmed quark and antiquark pair but has properties that are incompatible with a conventional charmonium state. While operating at center-of-mass energies from 2 to 5 GeV, the BESIII experiment can access a wide mass range of charmonium and charmoniumlike states, and has contributed significantly in this field. We review BESIII results involving conventional charmonium states, including the first observation of the M1 transition ψ(2S) → γηc(2S) and the discovery of the ψ2(3823) state; and report on studies of charmoniumlike states, including the discoveries of the Zc(3900) and Zc(4020) tetraquark candidates, the resolution of the fine structure of the Y(4260) state, the discovery of the new production process e+e− → γX(3872) and the uncovering of strong evidence for the commonality among the X(3872), Y(4260) and Zc(3900) states. The prospects for further research at BESIII and proposed future facilities are also presented. 相似文献
8.
The explosive development of inertial microfluidic systems for label-free sorting and isolation of cells demands improved understanding of the underlying physics that dictate the intriguing phenomenon of size-dependent migration in microchannels. Despite recent advances in the physics underlying inertial migration, migration dynamics in 3D is not fully understood. These investigations are hampered by the lack of easy access to the channel cross section. In this work, we report on a simple method of direct imaging of the channel cross section that is orthogonal to the flow direction using a common inverted microscope, providing vital information on the 3D cross-sectional migration dynamics. We use this approach to revisit particle migration in both straight and curved microchannels. In the rectangular channel, the high-resolution cross-sectional images unambiguously confirm the two-stage migration model proposed earlier. In the curved channel, we found two vertical equilibrium positions and elucidate the size-dependent vertical and horizontal migration dynamics. Based on these results, we propose a critical ratio of blockage ratio (β) to Dean number (De) where no net lateral migration occurs (β/De ∼ 0.01). This dimensionless number (β/De) predicts the direction of lateral migration (inward or outward) in curved and spiral channels, and thus serves as a guideline in design of such channels for particle and cell separation applications. Ultimately, the new approach to direct imaging of the channel cross section enables a wealth of previously unavailable information on the dynamics of inertial migration, which serves to improve our understanding of the underlying physics. 相似文献
9.
Inertial microfluidics is an emerging class of technologies developed to separate circulating tumor cells (CTCs). However, defining design parameters and flow conditions for optimal operation remains nondeterministic due to incomplete understanding of the mechanics, which has led to challenges in designing efficient systems. Here, we perform a parametric study of the inertial focusing effects observed in low aspect ratio curvilinear microchannels and utilize the results to demonstrate the isolation of CTCs with high purity. First, we systematically vary parameters including the channel height, width, and radius of curvature over a wide range of flow velocities to analyze its effect on size dependent differential focusing and migration behaviors of binary (10 μm and 20 μm) particles. Second, we use these results to identify optimal flow regimes to achieve maximum separation in various channel configurations and establish design guidelines to readily provide information for developing spiral channels tailored to potentially arbitrary flow conditions that yield a desired equilibrium position for optimal size based CTC separation. Finally, we describe a fully integrated, sheath-less cascaded spiral microfluidic device to continuously isolate CTCs. Human breast cancer epithelial cells were successfully extracted from leukocytes, achieving 86.76% recovery, 97.91% depletion rate, and sustaining high viability upon collection to demonstrate the versatility of the device. Importantly, this device was designed without the cumbersome trail-and-error optimization process that has hindered the development of designing such inertial microfluidic systems. 相似文献
10.
The distributions of linear combinations, products and ratios of random variables arise in many areas of engineering. In this note, the exact distributions of αX+βY, |XY| and |X/Y| are derived when X and Y are independent normal and Laplace random variables. 相似文献
11.
Acoustic radiation forces have been used to manipulate cells and bacteria in a number of recent microfluidic
applications. The net force on a cell has been subject to careful investigation over a number of decades. We
demonstrate that the radiation forces also act to deform
cells. An
ultrasonic standing
wave field is created in a
0.1 mm glass capillary at a frequency of 7.9 MHz. Using osmotically swollen red-blood cells, we show observable
deformations up to an aspect
ratio of 1.35, comparable to deformations created by optical tweezing. In contrast to optical technologies,
ultrasonic devices are
potentially capable of deforming thousands of cells simultaneously. We create a finite element model that includes both the acoustic
environment of the cell, and a model of the cell
membrane subject to forces resulting from the non-linear aspects of the acoustic
field. The model is found to
give reasonable agreement with the experimental results, and shows that the deformation is the result of variation in
an acoustic force that is directed outwards at all points on the cell membrane. We foresee applications in
diagnostic devices, and in the possibility of mechanically stimulating cells to promote differentiation and
physiological effects. 相似文献
12.
Partial least squares (PLSs) often require many latent variables (LVs) T to describe the variations in process variables X correlated with quality variables Y, which are obtained via the traditional nonlinear iterative PLS (NIPALS) optimal solution based on (X, Y). Total projection to latent structures (T-PLSs) performs further decomposition to extract LVs Ty directly related to Y from T, which are obtained by the PCA optimal solution based on the predicted value of Y. Inspired by T-PLS, combined with practical process characteristics, two fault detection approaches are proposed in this paper to solve problems encountered by T-PLS. Without the NIPALS, (X, Y) are projected into the latent variable space determined by main variations of Y directly. Furthermore, the structure and characteristics of several modified methods in statistical analysis are studied based on calculation procedures of solving PCA, PLS and T-PLS optimization problems, and the geometric significance of the T-PLS model is demonstrated in detail. Simulation analysis and case studies both indicate the effectiveness of the proposed approaches. 相似文献
13.
We classify gapped topological superconducting (TSC) phases of one-dimensional quantum wires with local magnetic symmetries, in which the time-reversal symmetry is broken, but its combinations with certain crystalline symmetries, such as , , and , are preserved. Our results demonstrate that an equivalent BDI class TSC can be realized in the or superconducting wire, which is characterized by a chiral Zc invariant. More interestingly, we also find two types of totally new TSC phases in the and superinducting wires, which are beyond the known AZ class, and are characterized by a helical Zh invariant and Zh⊕Zc invariants, respectively. In the Zh TSC phase, Z pairs of Majorana zero modes (MZMs) are protected at each end. In the case, the MZMs can be either chiral or helical, and even helical-chiral coexisting. The minimal models preserving or symmetry are presented to illustrate their novel TSC properties and MZMs. 相似文献
14.
This paper provides the closed form analytical solution to the problem of minimizing the material volume required to support a given set of bending loads with a given number of discrete structural members, subject to material yield constraints. The solution is expressed in terms of two variables, the aspect ratio, ρ-1, and complexity of the structure, q (the total number of members of the structure is equal to q(q+1)). The minimal material volume (normalized) is also given in closed form by a simple function of ρ and q, namely, V=q(ρ-1/q-ρ1/q). The forces for this nonlinear problem are shown to satisfy a linear recursive equation, from node-to-node of the structure. All member lengths are specified by a linear recursive equation, dependent only on the initial conditions involving a user specified length of the structure. The final optimal design is a class 2 tensegrity structure. Our results generate the 1904 results of Michell in the special case when the selected complexity q approaches infinity. Providing the optimum in terms of a given complexity has the obvious advantage of relating complexity q to other criteria, such as costs, fabrication issues, and control. If the structure is manufactured with perfect joints (no glue, welding material, etc.), the minimal mass complexity is infinite. But in the presence of any joint mass, the optimal structural complexity is finite, and indeed quite small. Hence, only simple structures (low complexity q) are needed for practical design. 相似文献
15.
The present paper sheds some light on a mathematical model for blood flow through stenosed arteries with axially variable peripheral layer thickness and variable slip at the wall. The model consists of a core region of suspension of all the erythrocytes assumed to be a Casson fluid and a peripheral layer of plasma as a Newtonian fluid. For such models, in literature, the peripheral layer thickness and slip velocity are assumed a priori based on experimental observations. In the present analysis, new analytic expressions for the thickness of the peripheral layer, slip velocity and core viscosity have been obtained in terms of measurable quantities (flow rate (Q), centerline velocity (U), pressure gradient (−dp/dz), plasma viscosity (μp) and yield stress (θ)). Using the experimental values of Q, U, (−dp/dz), μp and θ, the values of the peripheral layer thickness, core viscosity, and slip velocity at the wall have been computed. The theoretically obtained peripheral layer thickness has been compared with its experimental value. It is found that the agreement between the two is very good (error<1.4%). Further, a comparison between theoretical and experimental values of core viscosity is made and it is observed that the error between the two becomes 3.7465% in the case of two-layered model (Casson-Newtonian) for tube diameter 40 μm. The analysis developed here could be used to determine the more accurate values of the apparent viscosity of blood, agreeability, rigidity and deformability of red cells. This information of blood could be useful in the development of new diagnosis tools for many diseases. 相似文献
16.
Cancer cell migration through tissue pores and tracks into the bloodstream is a critical biological step for cancer metastasis. Although in vivo studies have shown that expression of vimentin can induce invasive cell lines, its role in cell cytoskeleton reorganization and cell motility under in vitro physical confinement remains unknown. Here, a microfluidic device with cell culture chamber and collagen-coated microchannels was developed as an in vitro model for physiological confinement environments. Using this microchannel assay, we demonstrated that the knockdown of vimentin decreases 3T3 fibroblast cell directional migration speed in confined microchannels. Additionally, as cells form dynamic membranes that define the leading edge of motile cells, different leading edge morphologies of 3T3 fibroblast and 3T3 vimentin knockdown cells were observed. The leading edge morphology change under confinement can be explained by the effect of vimentin on cytoskeletal organization and focal adhesion. The microfluidic device integrated with a time-lapse microscope provided a new approach to study the effect of vimentin on cell adhesion, migration, and invasiveness. 相似文献
17.
In this article, we present a microstructured multi-well plate for enabling three-dimensional (3D) high density seeding and culture of cells through the use of a standard laboratory centrifuge to promote and maintain 3D tissue-like cellular morphology and cell-specific functionality in vitro without the addition of animal derived or synthetic matrices or coagulants. Each well has microfeatures on the bottom that are comprised of a series of ditches/open microchannels. The dimensions of the microchannels promote and maintain 3D tissue-like cellular morphology and cell-specific functionality in vitro. After cell seeding with a standard pipette, the microstructured multi-well plates were centrifuged to tightly pack cells inside the ditches in order to enhance cell-cell interactions and induce formation of 3D cellular structures during cell culture. Cell-cell interactions were optimized based on cell packing by considering dimensions of the ditches/open microchannels, orientation of the microstructured multi-well plate during centrifugation, cell seeding density, and the centrifugal force and time. With the optimized cell packing conditions, we demonstrated that after 7 days of cell culture, primary human hepatocytes adhered tightly together to form cord-like structures that resembled 3D tissue-like cellular architecture. Importantly, cell membrane polarity was restored without the addition of animal derived or synthetic matrices or coagulants. 相似文献
18.
Jiafeng Yao Tatsuya Kodera Hiromichi Obara Michiko Sugawara Masahiro Takei 《Biomicrofluidics》2015,9(4)
The spatial concentration distribution of cells in a microchannel is measured by combining the dielectric properties of cells with the specific structure of the electrode-multilayered microchannel. The dielectric properties of cells obtained with the impedance spectroscopy method includes the cell permittivity and dielectric relaxation, which corresponds to the cell concentration and structure. The electrode-multilayered microchannel is constructed by 5 cross-sections, and each cross-section contains 5 electrode-layers embedded with 16 micro electrodes. In the experiment, the dielectric properties of cell suspensions with different volume concentrations are measured with different electrode-combinations corresponding to different electric field distributions. The dielectric relaxations of different cell concentrations are compared and discussed with the Maxwell-Wagner dispersion theory, and the relaxation frequencies are analysed by a cell polarization model established based on the Hanai cell model. Moreover, a significant linear relationship with AC frequency dependency between relative permittivity and cell concentration was found, which provides a promising way to on-line estimate cell concentration in microchannel. Finally, cell distribution in 1 cross-section of the microchannel (X and Y directions) was measured with different electrode-combinations using the dielectric properties of cell suspensions, and cell concentration distribution along the microchannel (Z direction) was visualized at flowing state. The present cell spatial sensing study provides a new approach for 3 dimensional non-invasive online cell sensing for biological industry. 相似文献
19.
The present investigation is concerned with the effects of thermal-diffusion and diffusion-thermo on an unsteady MHD free convection boundary layer flow with heat and mass transfer of an electrically conducting fluid over a stretching sheet in the presence of strong magnetic field with Hall current, thermal stratification, chemical reaction, heat generation, thermal radiation, Joule heating and viscous dissipation. The transformed nonlinear boundary layer equations are numerically solved by applying Keller-box method. The influence of various embedded flow parameters on the local skin friction, the local Nusselt number and the local Sherwood number has been carefully analyzed through graphs. It is found that the shear stress and the rate of mass transfer increase with an increasing of current density Jh while the reverse trend is observed on the rate of heat transfer. It is also found that the shear stress and the rate of heat transfer increase with an increasing of Sr , whereas the reverse trend is observed on the rate of mass transfer. Further, the shear stress and the rate of mass transfer increase with an increasing of Du while the reverse trend is seen on the rate of heat transfer. The numerical results are compared and found to be in good agreement with previously published results under special cases. 相似文献
20.
J.L. Allen 《Journal of The Franklin Institute》1973,295(1):25-38
Magnetic loss in remanent state ferrites1 has generally been described through the artifice of a magnetic loss tangent (tanδm = μ″?μ′). This characterization is not directly relatable to intrinsic material parameters. The results presented in this paper indicate that magnetic loss in the remanent state can be related to intrinsic material parameters by describing the ferrite mathematically by a complex “average” permeability tensor. The “average” permeability includes the effects of magnetocrystalline anistropy, remanent magnetization, linewidth and an average demagnetizing field appropriate to the distribution of magnetic domains. Experimental examples are given showing that excellent agreement is obtained between theoretically predicted and measured losses. 相似文献