共查询到20条相似文献，搜索用时 921 毫秒
1.
《Journal of The Franklin Institute》2022,359(17):9636-9665
This article is dedicated to the issue of asynchronous adaptive observer-based sliding mode control for a class of nonlinear stochastic switching systems with Markovian switching. The system under examination is subject to matched uncertainties, external disturbances, and quantized outputs and is described by a TS fuzzy stochastic switching model with a Markovian process. A quantized sliding mode observer is designed, as are two modes-dependent fuzzy switching surfaces for the error and estimated systems, based on a mode dependent logarithmic quantizer. The Lyapunov approach is employed to establish sufficient conditions for sliding mode dynamics to be robust mean square stable with extended dissipativity. Moreover, with the decoupling matrix procedure, a new linear matrix inequality-based criterion is investigated to synthesize the controller and observer gains. The adaptive control technique is used to synthesize asynchronous sliding mode controllers for error and SMO systems, respectively, so as to ensure that the pre-designed sliding surfaces can be reached, and the closed-loop system can perform robustly despite uncertainties and signal quantization error.Finally, simulation results on a one-link arm robot system are provided to show potential applications as well as validate the effectiveness of the proposed scheme. 相似文献
2.
This paper proposes an adaptive scheme of designing sliding mode control (SMC) for affine class of multi-input multi-output (MIMO) nonlinear systems with uncertainty in the systems dynamics and control distribution gain. The proposed adaptive SMC does not require any a priori knowledge of the uncertainty bounds and therefore offers significant advantages over the non-adaptive schemes of SMC design. The closed loop stability conditions are derived based on Lyapunov theory. The effectiveness of the proposed approach is demonstrated via simulations considering an example of a two-link robot manipulator and has been found to be satisfactory. 相似文献
3.
《Journal of The Franklin Institute》2023,360(11):7325-7356
This paper focuses on the distributed fuzzy learning sliding mode cooperative control issue for non-affine nonlinear multi-missile guidance systems. The dynamics of each follower is non-affine form with unknown lumped factor. To estimate the unknown lumped factor, a generalized fuzzy hyperbolic model (GFHM) based prescribed performance observer (PPO) is proposed. Different from the traditional disturbance observers, a residual set of error transient behavior is incorporated additionally so that the peak phenomenon can be avoided. Meanwhile, an auxiliary system is employed to convert the system of each follower to augmented affine form. Then, a distributed fuzzy learning sliding mode cooperative control approach is designed which consists of two parts. The adaptive sliding mode control (SMC) part is designed to force the states to move along the predefined integral sliding surface. For the equivalent sliding dynamics, the distributed optimal control part with GFHM is developed to minimize the cooperative performance function. Thus, the stability and the optimality of the closed-loop system are guaranteed synchronously. Finally, all signals of closed-loop system are rigorously proved bounded and the multi-missile cooperative guidance scenario is applied to verify the effectiveness of proposed method. 相似文献
4.
R. Sakthivel R. Sakthivel V. Nithya P. Selvaraj O.M. Kwon 《Journal of The Franklin Institute》2018,355(14):6353-6370
This paper studies the robust stochastic stabilization problem for a class of fuzzy Markovian jump systems with time-varying delay and external disturbances via sliding mode control scheme. Based on the equivalent-input-disturbance (EID) approach, an online disturbance estimator is implemented to reject the unknown disturbance effect on the considered system. Specifically, to obtain exact EID estimation Luenberger fuzzy state observer and a low-pass filter incorporated to the closed-loop system. Moreover, novel fuzzy EID-based sliding mode control law is constructed to ensure the stability of the closed-loop system with satisfactory disturbance rejection performance. By employing Lyapunov stability theory and some integral inequalities, a new set of delay-dependent robust stability conditions is derived in terms of linear matrix inequalities (LMIs). The resulting LMI is used to find the gains of the state-feedback controller and the state observer a for the resulting closed-loop system. At last, numerical simulations based on the single-link arm robot model are provided to illustrate the proposed design technique. 相似文献
5.
This paper is concerned with an event-triggered sliding mode control (SMC) scheme for trajectory tracking in autonomous surface vehicles (ASVs). First, an event-triggered variable that consists of tracking error, desired trajectory and exogenous input of the reference system is introduced to decrease the magnitude of the robust SMC term. Then, the reaching conditions of the designed event-triggered sliding mode are established. Moreover, the event-triggered induced errors that exist in the rotation matrix of the ASV are analyzed. In the presence of parameter uncertainties and external disturbances, the proposed event-triggered SMC scheme can ensure the control accuracy and low-frequency actuator updates. Then both actuator wear and energy consumption of the actuators can be reduced comparing with the traditional time-triggered controller. The proposed controller not only guarantees uniform ultimate boundedness of the tracking error but also ensures non-accumulation of inter-execution times. The results are illustrated through simulation examples. 相似文献
6.
7.
工业机器人运用技术是指在现有工业机器人的基础上所研发的应用技术,其主要目的是增强工业机器人的感知适应能力、降低用户使用难度、缩短示教与编程时间、提高工业机器人的运动精度以及拓宽其应用范围。然而,工业机器人运用技术一直以来没有得到足够的重视,造成工业机器人的设计制造与应用需求脱节,不仅限制了工业机器人的应用和普及,也制约了工业机器人产业自身的大规模发展。文章针对现有工业机器人在制造自动化应用中所存在的问题,系统地归纳和分析了工业机器人运用技术的重点研发方向,主要包括:提高易用性的直觉示教与快捷编程、提高绝对定位精度的运动标定与误差补偿以及拓宽应用范围的力-运动混合控制等关键共性技术。部署和实施相关技术的研发对于提高我国工业机器人的运用水平、加快制造业向智能化升级的步伐具有重要的意义。 相似文献
8.
This paper investigates the problem of sliding mode control (SMC) for discrete-time two-dimensional (2-D) systems subject to external disturbances. Given a 2-D Fornasini–Marchesini (FM) local state space model, attention is focused on designing the 2-D sliding surface and sliding mode controller, which guarantees the resultant closed-loop system to be asymptotically stable. Particularly, this problem is solved using the model transformation based method. First of all, sufficient conditions are formulated for the existence of a linear sliding surface guaranteeing the asymptotic stability of the equivalent sliding mode dynamics. Based on this, a sliding mode controller is synthesized to ensure that the associated 2-D FM system satisfies the reaching condition. The efficiency of the proposed 2-D SMC law design is shown by a numerical example. This paper extends the idea of model transformation to the 2-D systems and solves the SMC problem of a more general 2-D model in FM type for the first time. 相似文献
9.
《Journal of The Franklin Institute》2022,359(11):5488-5511
The issue of finite-time sliding mode control (SMC) is studied for a class of Markov jump systems, in which parameter uncertainties, external disturbances and time-varying delay are considered. Firstly, a suitable observer-based SMC law is devised so that state trajectory of the system can reach the designed sliding mode surface in finite-time, the gain of the controller is asynchronous to the mode of original system. Meanwhile, the sufficient conditions of finite-time boundedness in the sliding phase and reaching phase are derived by the time partition strategy. Moreover, the gains of the observer and the observer-based controller will be acquired by using the linear matrix inequalities tool. In fine, emulation products are used to confirm the merits of the SMC strategy. 相似文献
10.
Finite-time inter-layer projective synchronization (FIPS) of Caputo fractional-order two-layer networks (FTN) based on sliding mode control (SMC) technique is investigated in this article. Firstly, in order to realize the FIPS of FTN, a fractional-order integral sliding mode surface (SMS) is established. Then, through the theory of SMC, we design a sliding mode controller (SMCr) to ensure the appearance of sliding mode motion. According to the fractional Lyapunov direct method, the trajectories of the system are driven to the proposed SMS, and some novel sufficient conditions for FIPS of FTN are derived. Furthermore, as two special cases of FIPS, finite-time inter-layer synchronization and finite-time inter-layer anti-synchronization for the FTN are studied. Finally, this paper takes the fractional-order chaotic Lü’s system and the fractional-order chaotic Chen’s system as the isolated node of the first layer system and the second layer system, respectively. And the numerical simulations are given to demonstrate the feasibility and validity of the proposed theoretical results. 相似文献
11.
This study is concerned with the event-triggered sliding mode control problem for a class of cyber-physical switched systems, in which the Denial-of-Service (DoS) attacks may randomly occur according to the Bernoulli distribution. A key issue is how to design the output feedback sliding mode control (SMC) law for guaranteeing the dynamical performance of the closed-loop system under DoS attacks. To this end, an event-triggered mechanism is firstly introduced to reduce the communication load, under which the measurement signal is transmitted only when a certain triggering condition is satisfied. An usable output signal for the controller is constructed to compensate the effect of unmeasured states and DoS attacks. And then, a dynamic output feedback sliding mode controller is designed by means of the attack probability and the compensated output signals. Both the reachability and the mean-square exponential stability of sliding mode dynamics are investigated and the corresponding sufficient conditions are obtained. Finally, some numerical simulation results are provided. 相似文献
12.
This paper proposes a novel approach to the design of reaching law based on Sliding Mode Controller (SMC) for multi input multi output (MIMO) non-linear systems so as to overcome the drawbacks associated with conventional reaching law based SMC design strategies. The modification is proposed with an aim to completely eliminate chattering, to ensure control inputs within admissible limits and to guarantee fast response when SMC is used. Modification to conventional power rate reaching law is the point of interest here in order to ensure complete elimination of chattering. Two different modifications to power rate reaching law are presented which incorporate control constraints during controller design so that admissible control input limits are not exceeded. The first modified method ensures limited control effort as well as complete chattering free response, but does not improve the reaching characteristics. So a second adaptive modification to power rate reaching law is also presented here. This method ensures fast reaching to the sliding surface along with properties of complete elimination of chattering and bounded control inputs. However, as in power rate reaching law these modified methods retain the limitation of not possessing robustness properties. The method is applied to a three degree of freedom robotic arm which is typically a non-linear MIMO system. The ability of the presented method to satisfy attributes, viz., chattering free operation, bounded control inputs and fast response is compared with the performance of various reaching law methods available in the literature. The performance of the proposed method is validated through simulation studies on the robotic arm example. 相似文献
13.
Zeinab Echreshavi Mokhtar Shasadeghi Mohammad Hassan Asemani 《Journal of The Franklin Institute》2021,358(1):575-605
This paper focuses on a systematic constrained fuzzy integral sliding mode controller design for a class of uncertain discrete-time nonlinear systems which can be represented as Takagi-Sugeno (T-S) fuzzy models. The contributions are to consider constraints on the control input amplitude and control input amplitude rate and to extend the existing pole-placement design technique for designing gain matrices of the fuzzy sliding surface. Moreover, a dynamic-gain observer along with performance is proposed for attenuating disturbance, which generalizes the existing results on the Proportional Observer (PO), the Proportional Integral Observer (PIO) and the dynamic observer (DO). Finally, the dynamic-observer-based constrained fuzzy integral sliding mode controller is designed. All the proposed design conditions are represented in terms of LMIs-based ones. The methods are studied for not only single-input single-output (SISO) but also multi-input multi-output (MIMO) systems. In the end, the proposed approaches are evaluated on practical and numerical systems to illustrate the superiority of the proposed control scheme. 相似文献
14.
In this paper we investigate the cooperative tracking control problem with quantized time delay information exchange for a group of wheeled mobile robots networked through a connected graph modeling the underlying communication topology. A cooperative controller is proposed using a combination of backstepping technique, graph theory and neural network radial basis functions. We show, using the small gain theorem, that the states of each mobile robot in the group converge to and remain inside a tube centered around its assigned trajectory to form a desired geometric pattern whose centroid is assumed to move along a predefined trajectory. Experimental results on a group of three mobile robots forming a triangular shape are presented to demonstrate the good performance of the proposed cooperative controller. 相似文献
15.
In this paper, an observer-based sliding mode control (SMC) problem is investigated for a class of uncertain delta operator systems with nonlinear exogenous disturbance. A novel robust stability condition is obtained for a sliding mode dynamics by using Lyapunov theory in delta domain. Based on a designed sliding mode observer, a sliding mode controller is synthesized by employing SMC theory combined with reaching law technique. The robust asymptotical stability problem is also discussed for the closed-loop system composed of the observer dynamics and the state estimation error dynamics. Furthermore, the reachability of sliding surfaces is also investigated in state-estimate space and estimation error space, respectively. Finally, a numerical example is given to illustrate the feasibility and effectiveness of the developed method. 相似文献
16.
Sliding mode control of manipulators using first-order equations of motion with diagonal mass matrix
Przemys?aw Herman 《Journal of The Franklin Institute》2005,342(4):353-363
This paper presents a proposition of a sliding mode controller for a rigid manipulator expressed in terms of the generalized velocity components (GVC) vector. Introduction of GVC (Trans. ASME J. Appl. Mech. 62 (1995) 216) together with generalized positions leads to two first-order decoupled equations of motion instead of a single second-order equation. It is shown that the new controller, stable in the sense of Lyapunov, has different properties and can, according to Slotine and Li (Int. J. Robotics Res. 6 (1987) 49), give better performance than the classical sliding mode controller. Both control algorithms were tested on a 3 d.o.f., 3-D Yasukawa-like robot. 相似文献
17.
《Journal of The Franklin Institute》2022,359(2):1257-1273
This paper considers the sliding mode control (SMC) problem of a class of uncertain Markovian jump systems, in which there exist randomly occurring parameter uncertainties and random gain variations in the controller. By introducing two independent random variables obeying Bernoulli distribution, the random characteristics of parameter uncertainties and controller gain variations are described. A mode-dependent sliding surface is constructed, and then, the non-fragile SMC scheme is synthesized such that the specified sliding surface is reached in finite time. Furthermore, the stochastic finite-time boundedness over both the reaching and sliding stages are ensured simultaneously under some sufficient conditions. Finally, the developed non-fragile SMC approach is verified by a practical example. 相似文献
18.
《Journal of The Franklin Institute》2023,360(8):5504-5523
Multiplex networks involve different types of synchronization due to their complex spatial structure. How to control multiplex networks to achieve different types of synchronization is an interesting topic. This paper considers the fixed-time synchronization of multiplex networks under sliding mode control (SMC). Firstly, for realizing three types of synchronization of multiplex networks in a fixed time, a unified sliding mode surface (SMS) is established. After that, based on the theory of SMC, a sliding mode controller (SMCr) which is more intelligent and has a simpler form than those in the existing literature is put forward for multiplex networks. It can not only guarantee the emergence of sliding mode motion, but also can realize three different kinds of synchronization by adjusting some parameters or even one parameter of the controller. Based on some theories of fixed-time stability, this paper deduces several sufficient conditions for the trajectories of the system to reach the preset SMS in a fixed time, and derives some sufficient conditions for multiplex networks to realize three different types of fixed-time synchronization. At the same time, the settling time which can reveal what factors determine the fixed-time synchronization in multiplex networks is obtained. Finally, in numerical simulations, different chaotic systems are set for each layer of multiplex networks to represent the nodes of different layers, which can prove that the theoretical results are practical and effective. 相似文献
19.
Oscar Barambones Patxi Alkorta Jose Maria Gonzalez de Durana 《Journal of The Franklin Institute》2014
In this paper a sliding mode position control for high-performance real-time applications of induction motors is developed. The design also incorporates a sliding mode rotor flux estimator in order to avoid the flux sensors. The proposed control scheme presents a low computational cost and therefore can be implemented easily in a real-time applications using a low cost Digital Signal Processor (DSP). The stability analysis of the observer and the controller, under parameter uncertainties and load torque disturbances, is provided using the Lyapunov stability theory. Finally simulated and experimental results show that the proposed controller with the proposed observer provides a good trajectory tracking and that this scheme is robust with respect to plant parameter variations and external load disturbances. 相似文献
20.
In this paper, the observer-based sliding mode control (SMC) problem is investigated for a class of uncertain nonlinear neutral delay systems. A new robust stability condition is proposed first for the sliding mode dynamics, then a sliding mode observer is designed, based on which an observer-based controller is synthesized by using the SMC theory combined with the reaching law technique. Then, a sufficient condition of the asymptotic stability is proposed in terms of linear matrix inequality (LMI) for the overall closed-loop system composed of the observer dynamics and the state estimation error dynamics. Furthermore, the reachability problem is also discussed. It is shown that the proposed SMC scheme guarantees the reachability of the sliding surfaces defined in both the state estimate space and the state estimation error space, respectively. Finally, a numerical example is given to illustrate the feasibility of the proposed design scheme. 相似文献