首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Though the common default maximum likelihood estimator used in structural equation modeling is predicated on the assumption of multivariate normality, applied researchers often find themselves with data clearly violating this assumption and without sufficient sample size to utilize distribution-free estimation methods. Fortunately, promising alternatives are being integrated into popular software packages. Bootstrap resampling, which is offered in AMOS (Arbuckle, 1997), is one potential solution for estimating model test statistic p values and parameter standard errors under nonnormal data conditions. This study is an evaluation of the bootstrap method under varied conditions of nonnormality, sample size, model specification, and number of bootstrap samples drawn from the resampling space. Accuracy of the test statistic p values is evaluated in terms of model rejection rates, whereas accuracy of bootstrap standard error estimates takes the form of bias and variability of the standard error estimates themselves.  相似文献   

2.
When both model misspecifications and nonnormal data are present, it is unknown how trustworthy various point estimates, standard errors (SEs), and confidence intervals (CIs) are for standardized structural equation modeling parameters. We conducted simulations to evaluate maximum likelihood (ML), conventional robust SE estimator (MLM), Huber–White robust SE estimator (MLR), and the bootstrap (BS). We found (a) ML point estimates can sometimes be quite biased at finite sample sizes if misfit and nonnormality are serious; (b) ML and MLM generally give egregiously biased SEs and CIs regardless of the degree of misfit and nonnormality; (c) MLR and BS provide trustworthy SEs and CIs given medium misfit and nonnormality, but BS is better; and (d) given severe misfit and nonnormality, MLR tends to break down and BS begins to struggle.  相似文献   

3.
The purpose of this study is to investigate the effects of missing data techniques in longitudinal studies under diverse conditions. A Monte Carlo simulation examined the performance of 3 missing data methods in latent growth modeling: listwise deletion (LD), maximum likelihood estimation using the expectation and maximization algorithm with a nonnormality correction (robust ML), and the pairwise asymptotically distribution-free method (pairwise ADF). The effects of 3 independent variables (sample size, missing data mechanism, and distribution shape) were investigated on convergence rate, parameter and standard error estimation, and model fit. The results favored robust ML over LD and pairwise ADF in almost all respects. The exceptions included convergence rates under the most severe nonnormality in the missing not at random (MNAR) condition and recovery of standard error estimates across sample sizes. The results also indicate that nonnormality, small sample size, MNAR, and multicollinearity might adversely affect convergence rate and the validity of statistical inferences concerning parameter estimates and model fit statistics.  相似文献   

4.
This study compared diagonal weighted least squares robust estimation techniques available in 2 popular statistical programs: diagonal weighted least squares (DWLS; LISREL version 8.80) and weighted least squares–mean (WLSM) and weighted least squares—mean and variance adjusted (WLSMV; Mplus version 6.11). A 20-item confirmatory factor analysis was estimated using item-level ordered categorical data. Three different nonnormality conditions were applied to 2- to 7-category data with sample sizes of 200, 400, and 800. Convergence problems were seen with nonnormal data when DWLS was used with few categories. Both DWLS and WLSMV produced accurate parameter estimates; however, bias in standard errors of parameter estimates was extreme for select conditions when nonnormal data were present. The robust estimators generally reported acceptable model–data fit, unless few categories were used with nonnormal data at smaller sample sizes; WLSMV yielded better fit than WLSM for most indices.  相似文献   

5.
This Monte Carlo simulation study investigated the impact of nonnormality on estimating and testing mediated effects with the parallel process latent growth model and 3 popular methods for testing the mediated effect (i.e., Sobel’s test, the asymmetric confidence limits, and the bias-corrected bootstrap). It was found that nonnormality had little effect on the estimates of the mediated effect, standard errors, empirical Type I error, and power rates in most conditions. In terms of empirical Type I error and power rates, the bias-corrected bootstrap performed best. Sobel’s test produced very conservative Type I error rates when the estimated mediated effect and standard error had a relationship, but when the relationship was weak or did not exist, the Type I error was closer to the nominal .05 value.  相似文献   

6.
Robust maximum likelihood (ML) and categorical diagonally weighted least squares (cat-DWLS) estimation have both been proposed for use with categorized and nonnormally distributed data. This study compares results from the 2 methods in terms of parameter estimate and standard error bias, power, and Type I error control, with unadjusted ML and WLS estimation methods included for purposes of comparison. Conditions manipulated include model misspecification, level of asymmetry, level and categorization, sample size, and type and size of the model. Results indicate that cat-DWLS estimation method results in the least parameter estimate and standard error bias under the majority of conditions studied. Cat-DWLS parameter estimates and standard errors were generally the least affected by model misspecification of the estimation methods studied. Robust ML also performed well, yielding relatively unbiased parameter estimates and standard errors. However, both cat-DWLS and robust ML resulted in low power under conditions of high data asymmetry, small sample sizes, and mild model misspecification. For more optimal conditions, power for these estimators was adequate.  相似文献   

7.
Examined in this study were three procedures for estimating the standard errors of school passing rates using a generalizability theory model. Also examined was how these procedures behaved for student samples that differed in size. The procedures differed in terms of their assumptions about the populations from which students were sampled, and it was found that student sample size generally had a notable effect on the size of the standard error estimates they produced. Also the three procedures produced markedly different standard error estimates when student sample size was small.  相似文献   

8.
In practice, several measures of association are used when analyzing structural equation models with ordinal variables: ordinary Pearson correlations (PE approach), polychoric and polyserial correlations (PO approach), and conditional polychoric correlations (CPO approach). In the case of structural equation models without latent variables, the literature has shown that the PE approach is outperformed by the alternatives. In this article we report a Monte Carlo study showing the comparative performance of the aforementioned alternative approaches under deviations from their respective assumptions in the case of structural equation models with latent variables when attention is restricted to point estimates of model parameters. The CPO approach is shown to be the most robust against nonnormality. It is also robust to randomness of the exogenous variables, but not to the existence of measurement errors in them. The PO approach lacks robustness against nonnormality. The PE approach lacks robustness against transformation errors but otherwise it can perform about as well as the alternative approaches.  相似文献   

9.
In structural equation modeling software, either limited-information (bivariate proportions) or full-information item parameter estimation routines could be used for the 2-parameter item response theory (IRT) model. Limited-information methods assume the continuous variable underlying an item response is normally distributed. For skewed and platykurtic latent variable distributions, 3 methods were compared in Mplus: limited information, full information integrating over a normal distribution, and full information integrating over the known underlying distribution. Interfactor correlation estimates were similar for all 3 estimation methods. For the platykurtic distribution, estimation method made little difference for the item parameter estimates. When the latent variable was negatively skewed, for the most discriminating easy or difficult items, limited-information estimates of both parameters were considerably biased. Full-information estimates obtained by marginalizing over a normal distribution were somewhat biased. Full-information estimates obtained by integrating over the true latent distribution were essentially unbiased. For the a parameters, standard errors were larger for the limited-information estimates when the bias was positive but smaller when the bias was negative. For the d parameters, standard errors were larger for the limited-information estimates of the easiest, most discriminating items. Otherwise, they were generally similar for the limited- and full-information estimates. Sample size did not substantially impact the differences between the estimation methods; limited information did not gain an advantage for smaller samples.  相似文献   

10.
The present study evaluated the multiple imputation method, a procedure that is similar to the one suggested by Li and Lissitz (2004), and compared the performance of this method with that of the bootstrap method and the delta method in obtaining the standard errors for the estimates of the parameter scale transformation coefficients in item response theory (IRT) equating in the context of the common‐item nonequivalent groups design. Two different estimation procedures for the variance‐covariance matrix of the IRT item parameter estimates, which were used in both the delta method and the multiple imputation method, were considered: empirical cross‐product (XPD) and supplemented expectation maximization (SEM). The results of the analyses with simulated and real data indicate that the multiple imputation method generally produced very similar results to the bootstrap method and the delta method in most of the conditions. The differences between the estimated standard errors obtained by the methods using the XPD matrices and the SEM matrices were very small when the sample size was reasonably large. When the sample size was small, the methods using the XPD matrices appeared to yield slight upward bias for the standard errors of the IRT parameter scale transformation coefficients.  相似文献   

11.
It is well known that measurement error in observable variables induces bias in estimates in standard regression analysis and that structural equation models are a typical solution to this problem. Often, multiple indicator equations are subsumed as part of the structural equation model, allowing for consistent estimation of the relevant regression parameters. In many instances, however, embedding the measurement model into structural equation models is not possible because the model would not be identified. To correct for measurement error one has no other recourse than to provide the exact values of the variances of the measurement error terms of the model, although in practice such variances cannot be ascertained exactly, but only estimated from an independent study. The usual approach so far has been to treat the estimated values of error variances as if they were known exact population values in the subsequent structural equation modeling (SEM) analysis. In this article we show that fixing measurement error variance estimates as if they were true values can make the reported standard errors of the structural parameters of the model smaller than they should be. Inferences about the parameters of interest will be incorrect if the estimated nature of the variances is not taken into account. For general SEM, we derive an explicit expression that provides the terms to be added to the standard errors provided by the standard SEM software that treats the estimated variances as exact population values. Interestingly, we find there is a differential impact of the corrections to be added to the standard errors depending on which parameter of the model is estimated. The theoretical results are illustrated with simulations and also with empirical data on a typical SEM model.  相似文献   

12.
The usefulness of item response theory (IRT) models depends, in large part, on the accuracy of item and person parameter estimates. For the standard 3 parameter logistic model, for example, these parameters include the item parameters of difficulty, discrimination, and pseudo-chance, as well as the person ability parameter. Several factors impact traditional marginal maximum likelihood (ML) estimation of IRT model parameters, including sample size, with smaller samples generally being associated with lower parameter estimation accuracy, and inflated standard errors for the estimates. Given this deleterious impact of small samples on IRT model performance, use of these techniques with low-incidence populations, where it might prove to be particularly useful, estimation becomes difficult, especially with more complex models. Recently, a Pairwise estimation method for Rasch model parameters has been suggested for use with missing data, and may also hold promise for parameter estimation with small samples. This simulation study compared item difficulty parameter estimation accuracy of ML with the Pairwise approach to ascertain the benefits of this latter method. The results support the use of the Pairwise method with small samples, particularly for obtaining item location estimates.  相似文献   

13.
Multilevel structural equation modeling (MSEM) has been proposed as an extension to structural equation modeling for analyzing data with nested structure. We have begun to see a few applications in cross-cultural research in which MSEM fits well as the statistical model. However, given that cross-cultural studies can only afford collecting data from a relatively small number of countries, the appropriateness of MSEM has been questioned. Using the data from the International Social Survey Program (1997; N = 15,244 from 27 countries), we first showed how Muth?n's MSEM procedure could be applied to a real data set on cross-cultural research. Given a small country-level sample size (27 countries) we then demonstrated that results on the individual level were quite stable even when using small individual-level sample sizes, whereas the group-level parameter estimates and their standard errors were affected unsystematically by varying individual-level sample sizes. Use of the findings for cross-cultural research and other areas with limited numbers of groups are discussed.  相似文献   

14.
Data collected from questionnaires are often in ordinal scale. Unweighted least squares (ULS), diagonally weighted least squares (DWLS) and normal-theory maximum likelihood (ML) are commonly used methods to fit structural equation models. Consistency of these estimators demands no structural misspecification. In this article, we conduct a simulation study to compare the equation-by-equation polychoric instrumental variable (PIV) estimation with ULS, DWLS, and ML. Accuracy of PIV for the correctly specified model and robustness of PIV for misspecified models are investigated through a confirmatory factor analysis (CFA) model and a structural equation model with ordinal indicators. The effects of sample size and nonnormality of the underlying continuous variables are also examined. The simulation results show that PIV produces robust factor loading estimates in the CFA model and in structural equation models. PIV also produces robust path coefficient estimates in the model where valid instruments are used. However, robustness highly depends on the validity of instruments.  相似文献   

15.
The present study examines bias in parameter estimates and standard error in cross-classified random effect modeling (CCREM) caused by omitting the random interaction effects of the cross-classified factors, focusing on the effect of a sample size within cells and ratio of a small cell. A Monte Carlo simulation study was conducted to compare the correctly specified and the misspecified CCREM. While there was negligible bias in fixed effects, substantial biases were found in the random effects of the misspecified model depending on the number of samples within a cell and the proportion of small cells. However, in the case of the correctly specified model, no bias occurred. The present study suggests considering the random interaction effects when conducting CCREM to avoid overestimation of variance components and to calculate an accurate value of estimation. The implications of this study are to illuminate the conditions of cross-classification ratio and to provide a meaningful reference for applied researchers using CCREM.  相似文献   

16.
A resampling study was conducted to compare the statistical bias and standard errors of nonequivalent-groups linear test equating in small samples of examinees. Sample sizes of 15, 25, 50, and 100 were examined. One thousand samples of each size were drawn with replacement from each of 5 archival data files from teacher subject area tests. For each test, data files from 2 parallel forms were used. Results suggest trivial levels of equating bias even with small samples, but substantial increases in standard errors as sample size decreases. Results were interpreted in terms of applications to testing situations in which small numbers of examinees are available.  相似文献   

17.
Structural equation models with interaction and quadratic effects have become a standard tool for testing nonlinear hypotheses in the social sciences. Most of the current approaches assume normally distributed latent predictor variables. In this article, we describe a nonlinear structural equation mixture approach that integrates the strength of parametric approaches (specification of the nonlinear functional relationship) and the flexibility of semiparametric structural equation mixture approaches for approximating the nonnormality of latent predictor variables. In a comparative simulation study, the advantages of the proposed mixture procedure over contemporary approaches [Latent Moderated Structural Equations approach (LMS) and the extended unconstrained approach] are shown for varying degrees of skewness of the latent predictor variables. Whereas the conventional approaches show either biased parameter estimates or standard errors of the nonlinear effects, the proposed mixture approach provides unbiased estimates and standard errors. We present an empirical example from educational research. Guidelines for applications of the approaches and limitations are discussed.  相似文献   

18.
The aims of this study were to present a method for developing a path analytic network model using data acquired from positron emission tomography. Regions of interest within the human brain were identified through quantitative activation likelihood estimation meta-analysis. Using this information, a “true” or population path model was then developed using Bayesian structural equation modeling. To evaluate the impact of sample size on parameter estimation bias, proportion of parameter replication coverage, and statistical power, a 2 group (clinical/control) × 6 (sample size: N = 10, N = 15, N = 20, N = 25, N = 50, N = 100) Markov chain Monte Carlo study was conducted. Results indicate that using a sample size of less than N = 15 per group will produce parameter estimates exhibiting bias greater than 5% and statistical power below .80.  相似文献   

19.
The purpose of this study was to examine the behavior of 8 measures of fit used to evaluate confirmatory factor analysis models. This study employed Monte Carlo simulation to determine to what extent sample size, model size, estimation procedure, and level of nonnormality affected fit when polytomous data were analyzed. The 3 indexes least affected by the design conditions were the comparative fit index, incremental fit index, and nonnormed fit index, which were affected only by level of nonnormality. The measure of centrality was most affected by the design variables, with values of n2>. 10 for sample size, model size, and level of nonnormality and interaction effects for Model Size x Level of Nonnormality and Estimation x Level of Nonnormality. Findings from this study should alert applied researchers to exercise caution when evaluating model fit with nonnormal, polytomous data.  相似文献   

20.
This study used Monte Carlo methods to investigate the accuracy and utility of estimators of overall error and error due to approximation in structural equation models. The effects of sample size, indicator reliabilities, and degree of misspecification were examined. The rescaled noncentrality parameter (McDonald & Marsh, 1990) was examined as a measure of approximation error, whereas the one‐ and two‐sample cross‐validation indices and a sample estimator of overall error (EFo) proposed by Browne and Cudeck (1989, 1993) were presented as measures of overall error. The rescaled noncentrality parameter and EFo provided extremely accurate estimates of the amounts of approximation and overall error, respectively. However, although models with errors of omission produced larger estimates of approximation and overall error, the presence of errors of inclusion had little or no effect on estimates of either type of error. The cross‐validation indices and sample estimator of overall error reached minimum values for the same model as an empirically derived measure of overall error only for models with large amounts of specification error. Implications for the use of these estimators in choosing among competing models were discussed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号