Investigation of an Egyptian Mummy board by Using Clinical Multi-slice Computed Tomography     

Sveva Longo  Enricomaria Mormina  Francesca Granata  Domenico Mallamace  Marcello Longo  Silvia Capuani 《文物保护研究》2018,63(7):383-390

A modern approach to the diagnosis of artistic heritage makes use of non-destructive techniques which avoid damage to artworks or signs of interaction with the analytical technique used. For this reason, today, the employment of X-rays to study artistic heritage is quite widespread. Computed tomography (CT) Imaging was first used as specialized medical diagnostic tool in the early 1970s. Today, CT scanners have become more common, and non-destructive three-dimensional imaging has found an increasing number of uses in different areas such as materials research, geology, archaeology, and museum conservation. In this work, a new generation of clinical CT (based on the Dual Energy and multi-slice acquisition principle) is used to investigate an Egyptian wooden mummy board with a total acquisition time of 93.23 seconds and a voxel size of 0.078?×?0.078?×?1.5?mm. The use of two distinct techniques of image post-processing, the two-dimensional multi-planar reconstruction (MPR) and the three-dimensional volume rendering technique (VRT) allowed us to: evaluate the state of conservation of the mummy board, determine how the wooden object was implemented, recognize a nineteenth-century intervention of consolidation, and advance the hypothesis that the wooden planks were reused. In particular, we highlight the use of the cardiovascular and pulmonary filter with VRT reconstruction, which allows a virtual elimination of different parts of the mummy board to investigate those areas otherwise accessible only by removing parts of the board and thus damaging the work.  相似文献   

光学分层成像法重建火焰温度场的理论和实验研究     

汪凤林  王式民  陆勇 《东南大学学报》2001,17(2)

提出了一种测量三维火焰温度的新方法 .根据光学分层成像理论 ,三维火焰可以看成若干个互相平行的二维发光断层的组合 .用高速摄像控制系统沿着某一固定方向对火焰进行分层聚焦摄像 ,得到一组辐射图像 ,每个图像都是其对应断层的聚焦像和其它断层离焦像的叠加像 ,运用图像反演算法 ,即可重建各断层的原始图像 ,再用彩色三基色测温方法 ,处理所得到的原始图像 ,即可建立火焰的三维温度场 .通过蜡烛火焰的试验 ,验证了该方法的可行性  相似文献   

Ultrasonic tomography and its applications in oilfield     

钟兴福  吴应湘  李东晖  李强  王兴国 《浙江大学学报(A卷英文版)》2005,6(12):1420-1423

INTRODUCTION Oil and water well is an important basic estab- lishment in oilfields. In many oilfields, there are many different damages in the well’s casing walls after its development for a period of time. They will affect the normal production of damaged wells and adversely influence the neighbouring wells and the block, and threaten steady production. There are different kinds of damages due to multiple problems in the casing walls, for example, corrosion, perforation, decreased diame…  相似文献   

Case Report:Lance-Adams syndrome:a report of two cases     

ZHANG Yan-xing    LIU Jian-ren  JIANG biao  LIU Hui-qin  DING Mei-ping  SONG Shui-jiang  ZHANG Bao-rong  ZHANG Hong  XU Bin  CHEN Huai-hong  WANG Zhong-jin  HUANG Jian-zheng 《Journal of Zhejiang University. Science. B》2007,(10)

Chronic post-hypoxic myoclonus, also known as Lance-Adams syndrome (LAS), is a rare complication of successful cardiopulmanry resuscitation often accompanied by action myoclonus and cerebellar ataxia. It is seen in patients who have un-dergone a cardiorespiratory arrest, regained consciousness afterwards, and then developed myoclonus days or weeks after the event. Worldwide, 122 cases have been reported in the literature so far, including 1 case of Chinese. Here we report 2 Chinese LAS patients with detailed neuroimagings. Cranial single photon emission computed tomography (SPECT) of patient 1, a 52-year-old woman, showed a mild hypoperfusion in her left temporal lobe, whereas patient 2, a 54-year-old woman, manifested a mild bilateral decrease of glucose metabolism in the frontal lobes and a mild to moderate decrease of the N-acetyl aspartate (NAA) peak in the bilateral hippocampi by cranial [18F]-fluorodeoxyglucose positron emission tomographic (PET) scan and cranial magnetic resonance spectroscopy (MRS), respectively. We also review the literature on the neuroimaging, pathogenesis, and treatment of LAS.  相似文献   

薄层CT动态扫描在诊断胰腺癌侵犯血管中的价值     

陈水泉  钟百书 《科技通报》1997,13(5):335-338

探讨了胰腺癌血管受累的ＣＴ分型与肿瘤手术可切除性的关系．对４３例经手术、病理证实的胰腺癌进行薄层ＣＴ动态扫描，根据确定的ＣＴ标准，观察肿瘤与血管的关系，并与手术结果对照．发现胰腺癌血管受累以Ｃ型最常见，占３７．２％，Ａ型１０例，肿瘤切除率１００％（１０／１０），Ｂ型９例，切除率为７７．８％（７／９），Ｃ型、Ｄ型２４例，均不可切除．表明薄层ＣＴ动态扫描能提高胰腺癌血管受累的诊断正确率，血管受累ＣＴ分型对外科制定手术计划具有一定价值．  相似文献   

Computed tomography using level set method and algebraic reconstruction technique     

薛倩  王化祥 《天津大学学报(英文版)》2011,17(6):418-423

In this paper, a novel reconstruction technique based on level set method and algebraic reconstruction technique is proposed for multiphase flow computed tomography (CT) system. The curvature-driven noise reduction method is inserted into the conventional iteration procedure of algebraic reconstruction technique to improve the image quality and convergence speed with limited projection data. By evolving the image as a set of iso-intensity contours after each updation, the sufficient number of iterations for acceptable results is reduced by 80%-90%, while the image quality is enhanced obviously. Quantitative evaluation of image quality is given by using both relative image error and correlation coefficient. The resultant images can be utilized to detect flow regimes for monitoring industrial multiphase flow. Laboratory results demonstrate the feasibility of the proposed method. Phantoms of four typical flow regimes can be reconstructed from few-view projection data efficiently, and the corresponding image errors and correlation coefficients are acceptable for the cases tested in this paper.  相似文献   

Digital body preservation: Technique and applications     

Vicky Vandenbossche  Joris Van de Velde  Stind Avet  Wouter Willaert  Stian Soltvedt  Noeska Smit  Emmanuel Audenaert 《Anatomical sciences education》2022,15(4):731-744

High-fidelity anatomical models can be produced with three-dimensional (3D) scanning techniques and as such be digitally preserved, archived, and subsequently rendered through various media. Here, a novel methodology—digital body preservation—is presented for combining and matching scan geometry with radiographic imaging. The technique encompasses joining layers of 3D surface scans in an anatomical correct spatial relationship. To do so, a computed tomography (CT) volume is used as template to join and merge different surface scan geometries by means of nonrigid registration into a single environment. In addition, the use and applicability of the generated 3D models in digital learning modalities is presented. Finally, as computational expense is usually the main bottleneck in extended 3D applications, the influence of mesh simplification in combination with texture mapping on the quality of 3D models was investigated. The physical fidelity of the simplified meshes was evaluated in relation to their resolution and with respect to key anatomical features. Large- and medium-scale features were well preserved despite extensive 3D mesh simplification. Subtle fine-scale features, particular in curved areas demonstrated the major limitation to extensive mesh size reduction. Depending on the local topography, workable mesh sizes ranging from 10% to 3% of the original size could be obtained, making them usable in various learning applications and environments.  相似文献   

Investigation of Cheb relief intarsia and the study of the technological process of its production by micro computed tomography     

《Journal of Cultural Heritage》2014,15(6):609-613

Cheb relief intarsia is one of the most significant artistic techniques used in the early and middle baroque furniture manufacturing. The origin of this exceptional technique is closely tied to the city of Cheb and in a wider perspective, similarly to rondocubism or cubism applied in architecture; it is a branch of decorative arts distinctive just only for Czech lands. Here we report on the findings made on the basis of non-destructive X-ray micro computed tomography (μCT) analysis for determination of the condition and characteristics of the inner structures of an original plate of Cheb relief intarsia. The results of this analysis not only helped to clarify the manufacturing process itself, but also contributed to aim the future actions of the effective intarsia conservation in regard to the spreading internal cracks and defects in the plate discovered by μCT analysis.  相似文献   

三维Q值层析成像人机交互软件及其在地震数据处理中的应用     

樊计昌  刘明军  海燕 《中国科学院研究生院学报》2011,28(4)

Q值结构对了解地壳的非弹性性质、地壳内部构造、热活动状态、地壳介质非均匀性以及断层分布有着重要的意义.编写了基于吸收特征时间t*的三维Q值层析成像人机交互软件,可以方便快捷地计算地震体波（P波和S波）的振幅谱并通过拟合振幅谱得到反映地震波衰减的吸收特征时间t*,并利用t*资料通过三维Q值层析成像方法得到三维Q值结构.实际观测资料处理结果表明,文中给出的方法和软件是有效且可行的.  相似文献   

Effect of increased intra-abdominal pressure and decompressive laparotomy on aerated lung volume distribution     

Jian-cang Zhou  Qiu-ping Xu  Kong-han Pan  Chen Mao  Chong-wu Jin 《Journal of Zhejiang University. Science. B》2010,11(5):378-385

Increased intra-abdominal pressure(IAP) is common in intensive care patients,affecting aerated lung volume distribution.The current study deals with the effect of increased IAP and decompressive laparotomy on aerated lung volume distribution.The serial whole-lung computed tomography scans of 16 patients with increased IAP were retrospectively analyzed between July 2006 and July 2008 and compared to controls.The IAP increased from(12.1±2.3) mmHg on admission to(25.2±3.6) mmHg(P<0.01) before decompressive lap...  相似文献