首页 | 本学科首页   官方微博 | 高级检索  
     检索      

固体超强酸S_2O_8~(2-)/ZrO_2-TiO_2催化合成乙二酸二丁酯
引用本文:杨呈祥,张华山.固体超强酸S_2O_8~(2-)/ZrO_2-TiO_2催化合成乙二酸二丁酯[J].洛阳师范学院学报,2005(2).
作者姓名:杨呈祥  张华山
作者单位:盐城师范学院化学系,盐城师范学院化学系 江苏盐城 224002,江苏盐城 224002
摘    要:制备固体超强酸催化剂S2O82-/TiO2-ZrO2,用于合成乙二酸二丁酯,较系统地研究了该催化剂焙烧温度、用量、酸醇物质的量比、反应时间、反应温度和带水剂用量对酯化反应的影响.实验表明:S2O82-/ZrO2-TiO2是合成乙二酸二丁酯的良好催化剂.在催化剂焙烧温度为500℃,乙二酸为0.2mol时,酸醇的物质的量比为1:4,反应温度为130-135℃,反应时间为90min,催化剂用量为2.0g的优化条件下,乙二酸二丁酯的酯化率达95%.

关 键 词:超强酸  S2O82-/ZrO2-TiO2  合成  乙二酸二丁酯

Synthesis of Oxalic Acid Dibutyl Estar with Solid Super Acid S_2O_8~(2-)/ZrO_2-TiO_2 as Catalysis
YANG Cheng-xiang,ZHANG Hua-shan.Synthesis of Oxalic Acid Dibutyl Estar with Solid Super Acid S_2O_8~(2-)/ZrO_2-TiO_2 as Catalysis[J].Journal of Luoyang Teachers College,2005(2).
Authors:YANG Cheng-xiang  ZHANG Hua-shan
Abstract:; The solid super acid S2O82-/ZrO2-TiO2 was prepared as catalyst for synthesizing oxalic acid dibutyl ester, and its baked temperature during preparation and its activation as catalyst during the related esterifica-tion process were examined. The temperature, proportionment of raw materials, consumption of catalyst and time for reaction were investigated in detail. The results show that S2O82-/ZrO2-TiO2 is the better catalyst for preparation of oxalic acid dibutyl ester Under the Optimizing condition, the efficiency of yield of oxalic acid dibutyl ester reaches about 95% . The optimum condition is as follows; the mole ratio of alcohol to acid is 4: 1 and 0. 2g catalyst is consumed; the temperature reaches130-135℃, and the total time is 90min when the baked temperature of catalyst is 500℃ and the amount used 0. 2mol.
Keywords:super acid  catalysis  oxalic acid dibutyl ester
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号