| 树脂结合剂金刚石砂轮磨削火成岩质水晶的磨削力研究 |
| |
| 引用本文： | 张继东,黄俊玲,詹友基.树脂结合剂金刚石砂轮磨削火成岩质水晶的磨削力研究[J].福建工程学院学报,2017,0(3):238-242. |
| |
| 作者姓名： | 张继东 黄俊玲 詹友基 |
| |
| 作者单位： | 安徽信息工程学院机械工程系 |
| |
| 摘 要： | 采用270目树脂结合剂金刚石砂轮以顺磨磨削方式对火成岩质水晶进行平面磨削实验。通过测量磨削过程中的磨削垂直力和水平力，得出砂轮线速度、进给速度、磨削深度对磨削力的影响特征。实验结果表明，当提高砂轮线速度时磨削力减小，增大进给速度时磨削力增大，增大磨削深度时磨削力增大。最后对火成岩质水晶磨削力比进行讨论和分析，拟合出磨削力比Ft/Fn为0.085。
|
| 关 键 词： | 火成岩质水晶 树脂结合剂金刚石砂轮 磨削力 磨削力比 |
Research of grinding force in the grinding of igneous crystal with resin bonded diamond wheel |
| |
| Zhang Jidong,Huang Junling,Zhan Youji.Research of grinding force in the grinding of igneous crystal with resin bonded diamond wheel[J].Journal of Fujian University of Technology,2017,0(3):238-242. |
| |
| Authors: | Zhang Jidong Huang Junling Zhan Youji |
| |
| Institution: | Mechanical Engineering Department， Anhui Institute of Information Technology |
| |
| Abstract: | Plane grinding experiments of igneous crystal were conducted with 270-mesh resin bonded diamond wheel via clockwise（circular）grinding method. By measuring the vertical and horizontal grinding forces in the grinding process, the influences of linear (peripheral) speed, feeding speed and grinding depth on the grinding forces were obtained. The experimental results show that the grinding force decreases when the linear (peripheral）speed increases, but increases with the increase of the feed speed and the increase of the grinding depth. The grinding force ratio of the igneous crystal was analysed. The fitted grinding force ratio of Ft/Fn was 0.085. |
| |
| Keywords: | igneous crystal resin bonded diamond wheel grinding force grinding force ratio |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《福建工程学院学报》浏览原始摘要信息 |
| 点击此处可从《福建工程学院学报》下载免费的PDF全文 |
