| A Web-based machining process monitoring system for E-manufacturing implementation |
| |
| 作者姓名： | SHIN Bong-cheol KIM Gun-hee CHOI Jin-hwa JEON Byung-cheol LEE Honghee CHO Myeong-woo HAN Jin-yong PARK Dong-sam |
| |
| 作者单位： | Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Division of Mechanical Engineering Inha University Incheon 402-751 Korea，Department of Mechanical Engineering University of Incheon Incheon 402-749 Korea |
| |
| 基金项目： | Project (No. KRF-2005-202-D00046) supported by the Korea Re-search Foundation |
| |
| 摘 要： | INTRODUCTION Recently, the application of the information technology into manufacturing fields gets more and more importance on the whole manufacturing shop floors. Currently, many researches reflect the effec- tiveness of knowledge-based production system re- lated to the exchange and management of various manufacturing information using information tech- nology via the Internet in order to increase the com- petitive power of industries. This research suggests a Web-based machining proce…
|
| 关 键 词： | 网络制造 Web系统 Internet 专家系统 自动化 |
| 收稿时间： | 2006-02-28 |
| 修稿时间： | 2006-05-03 |
A Web-based machining process monitoring system for E-manufacturing implementation |
| |
| SHIN Bong-cheol KIM Gun-hee CHOI Jin-hwa JEON Byung-cheol LEE Honghee CHO Myeong-woo HAN Jin-yong PARK Dong-sam.A Web-based machining process monitoring system for E-manufacturing implementation[J].Journal of Zhejiang University Science,2006,7(9):1467-1473. |
| |
| Authors: | Bong-cheol Shin Gun-hee Kim Jin-hwa Choi Byung-cheol Jeon Honghee Lee Myeong-woo Cho Jin-yong Han Dong-sam Park |
| |
| Institution: | (1) Division of Mechanical Engineering, Inha University, Incheon, 402-751, Korea;(2) Department of Mechanical Engineering, University of Incheon, Incheon, 402-749, Korea |
| |
| Abstract: | Recently, with the rapid growth of information technology, many studies have been performed to implement Web-based manufacturing system. Such technologies are expected to meet the need of many manufacturing industries who want to adopt E-manufacturing system for the construction of globalization, agility, and digitalization to cope with the rapid changing market requirements. In this research, a real-time Web-based machine tool and machining process monitoring system is developed as the first step for implementing E-manufacturing system. In this system, the current variations of the main spindle and feeding motors are measured using hall sensors. And the relationship between the cutting force and the spindle motor RMS (Root Mean Square) current at various spindle rotational speeds is obtained. Thermocouples are used to measure temperature variations of important heat sources of a machine tool. Also, a rule-based expert system is applied in order to decide the machining process and machine tool are in normal conditions. Finally, the effectiveness of the developed system is verified through a series of experiments. |
| |
| Keywords: | E-manufacturing Web-based system Internet Machining process monitoring Expert system |
| 本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录！ |
