| 填料对环氧树脂模具材料力学性能的影响 |
| |
| 引用本文： | 伊启中,顾永华,江开勇.填料对环氧树脂模具材料力学性能的影响[J].福建工程学院学报,2007,5(4):348-350. |
| |
| 作者姓名： | 伊启中 顾永华 江开勇 |
| |
| 作者单位： | 1. 福建工程学院材料科学与工程系,福建,福州,350014
2. 华侨大学机电及自动化学院,福建,泉州,362106 |
| |
| 基金项目： | 福建省科技重大专项专题资助项目 |
| |
| 摘 要： | 利用试验方法测得以铝粉、铁粉为填料以及在3种不同用量情况下,环氧树脂模具材料的抗压强度、抗弯强度和抗冲击强度.结果表明,以铝粉为填料的环氧树脂模具材料的力学性能优于以铁粉为填料的固化物的性能;当w(Al)=150%时,环氧树脂模具材料的抗压、抗弯、抗冲击强度达到最优值.
|
| 关 键 词： | 环氧树脂模具材料 填料 力学性能 质量配比 |
| 文章编号： | 1672-4348（2007）04-0348-03 |
| 修稿时间： | 2007-04-20 |
Influence of fillers on the mechanical performance of epoxy resin mold materials |
| |
| Yi Qizhong,Gu Yonghua,Jiang Kaiyong.Influence of fillers on the mechanical performance of epoxy resin mold materials[J].Journal of Fujian University of Technology,2007,5(4):348-350. |
| |
| Authors: | Yi Qizhong Gu Yonghua Jiang Kaiyong |
| |
| Institution: | 1. Materials Science and Engineering Department, Fujian University of Technology, Fuzhou 350014, China; 2. College of Mechanical Engineering and Automation, Huaqiao University, Quanzhou 362106, China |
| |
| Abstract: | The compressive strength,bending strength and impact strength of epoxy resin mold materials were studied using powdered aluminum and iron as fillers in different dosage.The results show that the performance of the mold materials with powdered aluminum is better than that of the mold material with iron.When the dosage of powdered aluminum is 150 per cent,the compressive strength,bending strength and impact strength of the mold material reach the maximum. |
| |
| Keywords: | epoxy resin mold material filler mechanical performance mass proportion |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
