| 多楔带单根磨削机控制系统的改进 |
| |
| 引用本文： | 沈佳.多楔带单根磨削机控制系统的改进[J].湖州职业技术学院学报,2006,4(3):92-94. |
| |
| 作者姓名： | 沈佳 |
| |
| 作者单位： | 浙江信息工程学校,浙江,湖州,313000 |
| |
| 摘 要： | 多楔带单根磨削机在调试时,存在步进电机只有正转不能反转的问题。在排除了步进电机驱动器、高速脉冲输出模块等硬件上的问题后,将高速脉冲输出模块设置成单脉冲控制方式,步进电机即可实现正、反转运行;如果程序中磨削进给量的分配是固定不变的,会产生磨削质量达不到要求,磨削效率低等问题。设计中采用磨削进给量和间隔时间都是变化的方法,可在保证产品质量的前提下提高生产效率。
|
| 关 键 词： | 多楔带单根磨削机 步进电机 流程图 进给量 |
| 文章编号： | 1672-2388（2006）03-0092-03 |
| 收稿时间： | 2006-05-17 |
| 修稿时间： | 2006-05-17 |
The Improvement Ways of Controlling System for Single-Belt Buffering Machine for Poly V-Belt |
| |
| SHEN Jia.The Improvement Ways of Controlling System for Single-Belt Buffering Machine for Poly V-Belt[J].Journal of Huzhou Vocational and Technological College,2006,4(3):92-94. |
| |
| Authors: | SHEN Jia |
| |
| Institution: | Zhejiang Information Project School, Huzhou 313000, China |
| |
| Abstract: | During the preliminary test,single belt buffering machine for poly Vbelt can only turn in the right direction,but can not be reversed.After wiping out the possible problems with stepper motor's driver and speed pulse output's module,stepper motor can turn in both directions if speed pulse output's module is designed as single pulse output's module.If the distribution of buffering feeding quantity is unchangable in the program,problems will arise such as poor buffering qualities and low buffering efficiency.Both buffering qualities and buffering efficiency can be guaranteed by changing buffering feeding quantity and its intervals in the designs. |
| |
| Keywords: | single-belt buffering machine for poly V-belt stepper motor flow chart feeding quantity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
