| 球床式高温气冷堆堆芯三维建模及稳态热工水力分析 |
| |
| 作者姓名： | 张双宝 李良星 谢伟 王凯琳 |
| |
| 作者单位： | 西安交通大学动力工程多相流国家重点实验室, 西安 710049 |
| |
| 摘 要： | 准确可靠的反应堆热工水力分析对球床模块式高温气冷堆的设计及安全运行具有重要意义。基于氦气冷却剂在高温气冷堆堆芯的流动和传热进程，利用CFD软件构建高温气冷堆堆芯的三维耦合模型，模拟计算额定工况下氦气冷却剂在堆芯内的流动和传热过程，并将计算结果与使用THERMIX软件的计算结果进行对比。结果表明：在额定工况下三维模型的稳态计算结果与THERMIX计算数据吻合，相对误差小于1%，三维模型可用于模拟堆芯的冷却剂温度分布情况。研究结果可为后续开展高温气冷堆的堆芯旁流等复杂热工水力现象的分析奠定基础。
|
| 关 键 词： | 高温气冷堆 球床 热工水力 多孔介质 计算流体动力学 |
| 收稿时间： | 2019-03-09 |
| 修稿时间： | 2019-08-01 |
Three-dimensional modeling of pebble bed type high temperature gas-cooled reactor core and steady-state thermal hydraulic analysis |
| |
| Authors: | ZHANG Shuangbao LI Liangxing XIE Wei WANG Kailin |
| |
| Institution: | State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China |
| |
| Abstract: | Accurate and reliable reactor thermal hydraulic analysis has important significance for the design and safe operation of the pebble bed modular high temperature gas-cooled reactor. Based on the helium coolant flow and heat transfer process at the core of high temperature gas-cooled reactor, we establish a three-dimensional coupled model by using CFD (computational fluid dynamics) software to simulate the flow and heat transfer of helium coolant at the core. Then the model is verified by comparison of the calculation results with the published results using THERMIX software. The results show that the steady-state results using the three-dimensional model are in agreement with THERMIX calculation data under the rated working conditions, and the relative error is less than 1%. The three-dimensional model simulates the coolant temperature distribution at the core. The research results lay the foundation for the subsequent analysis of complex thermal hydraulic phenomena such as core bypass of high temperature gas-cooled reactor. |
| |
| Keywords: | high temperature gas-cooled reactor pebble bed thermal hydraulics porous media CFD(computational fluid dynamics) |
|
| 点击此处可从《》浏览原始摘要信息 |
| 点击此处可从《》下载免费的PDF全文 |
