首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In order to protect historical buildings in the northwest China from fire, the most of which are temples for Buddhism, water mist suppression system is chosen due to less damage on water-soluble decorations. This study is to investigate the feasibility and efficiency of water mist suppressing fire occurred in historical buildings. Eternal ghee lamp over the years is serious fire hazard for these temples. In this paper, the interaction of water mist and ghee flame under different external radiant heat fluxes is studied. Water mist was generated by a downward-directed single pressure nozzle. The heat release rate, carbon dioxide and carbon monoxide concentrations, and other important parameters of the interaction under various experimental conditions were measured with cone calorimeter. It is indicated that water mist can assuredly suppress ghee flame. But ghee combustion is enhanced for a short time just on discharging water mist, and then ghee flame is extinguished quickly under continuous water mist application.  相似文献   

2.
The influence of chemical treatments based on novel organic products on the consolidation of deteriorated wood by insect attack was evaluated on two hardwoods and one softwood: fir (Abies alba), beech (Fagus sylvatica) and deciduous oak (Quercus sp.). Degraded and intact specimens of the three wood species were impregnated with two different chemical treatments aimed to verify the potential synergic action of the novel products on wood. Then, the specimens were subjected to bending, compression parallel to the grain, impact, hardness and water absorption tests. Untreated specimens of the same botanical species, both degraded and non-degraded, were examined for comparison purposes. The experimental results showed a different effectiveness of the proposed chemical treatments to improve the mechanical and absorption properties of degraded wood. The most effective treatment was the one assuming the concurrent use of the studied novel consolidants. The species more susceptible of the enhancement in mechanical properties were fir and beech. The observed differentiations were most likely caused by the different structure of the botanical species considered, leading to a consequent different product penetration in the wood structure. The dimensional stability in terms of water repellent and antiswelling efficiency, after a three-month immersion in deionized water, was found to improve in all the treated wood specimens. Overall, experimental results showed that the impact of the chemical treatments was higher on degraded samples than on intact ones.  相似文献   

3.
A medieval wooden panel chamber was rediscovered during reconstruction of the Tetzelhouse in the Saxon town of Pirna. Ceiling and walls are made from 600-year-old fire wood panels fitted together. The complete removal of layers (limewash, plaster, glue and dirt) from the wall panels was the precondition for conservation of the wood panels and for the restoration of the wooden panel chamber. The cleaning was carried out with a pulsed Nd:YAG laser after basic investigation of ablation mechanisms of the layers on the old wood. All layers of the different materials were removed both from the normal surface and out of depressions and woodworm holes with a special range of laser parameters, without damaging the wood. Within this range of parameters the laser cleaning is a self-limiting process. The health hazard from emitted waste products were determined and checked with work place measurements. The laser cleaning of the wooden wall panels was completed in March 1999. A uniform visual impression of all panels was obtained with a warm wooden colour tone.  相似文献   

4.
The direct recording of the water presence in stone materials or in masonry provides information about their state of conservation and it can also indirectly reveal the effectiveness and durability of protection treatments or chemical interventions for rising damp reduction. Evaluating the humidity, i.e. the water content, of a building material is a problematic issue because the water is distributed in a large volume in different amounts. Usually these kinds of measures have been carried out with resistance/conductivity and thermographic systems, which are all affected by weaknesses and intrinsic restrictions. Thermographic investigations are affected by temperature differences and the evaporation–cooling effect. In the case of electric measures, the signal does not originate from the water present, but from the conductivity of the water itself, which is strictly connected to the presence of ion species that can modify it significantly. Moreover, interruptions, like air gaps or fractures, cancel the signal. For both methodologies the quantitative water evaluation is difficult. Although some minerals, like iron-based ones, could disturb the NMR measure, the signal is not influenced by the presence of most common soluble salts or pollutants in the solution (such as nitrates, chlorides or sulphates) and it is only generated by the number of water molecules present in the sensitive volume. In this paper the results, obtained in the laboratory with a portable NMR device, developed within the framework of the Eureka Project E!2214-MOUSE, are shown. The encouraging results obtained in this preliminary experiment, concern mainly the investigation of stone materials that have different porosimetric features and the calibration of the instrument under different working conditions. The experiments focused on the correlation between the content of water absorbed by capillarity and the NMR signal intensity obtained by this device. Different materials have been investigated, such as calcarenite and bricks. The experimental work will define a starting platform to successfully transfer the analytical procedure from the laboratory to in situ measurements.  相似文献   

5.
Acetic and formic acid vapors emitted from woodwork in historical organs are very important corrosive agents for lead pipes. These acids are slowly released from the wood both during playing and when the pipes are silent. To inhibit this emission process, the wood surface can be modified, by creating a protective layer with alkaline features. However, a coating of wood is not recommended since this could modify the appearance and create a layer not perfectly compatible with the substrate. For this reason, we propose to use some innovative nanotechnology that has been successfully applied for the deacidification of wood samples coming from the Vasa shipwreck. Application of calcium (or magnesium) hydroxide nanoparticles, with sizes ranging from 30–150 nm, allowed a homogeneous distribution of particles through the surface layer of wood simply by soaking (or spraying) it in a alcoholic (or mixed with less polar solvents) dispersion of nanoparticles. Nanoparticles do not modify the wood appearance and distribute randomly within the first layers of wood. The small size of particles accounts for the high reactivity with CO2 from the air, to give the alkaline reserve of carbonates that provide high efficacy in the neutralization of gaseous acids. The emission of volatile organic compounds (VOC) from the treated wood was determined by using an emission test cell, Field and Laboratory Emission Cell (FLEC). The results show that the emissions of acetic acid vapor from nanoparticles treated wood was very low (< 70 μg/m2 h) during the first 13 month. In contrast, untreated wood emitted high concentrations of acetic acid vapor (200–400 μg/m2 h).  相似文献   

6.
The central place occupied by actuarial calculation in insurance is usually understood as resulting from the process of bringing the laws of large numbers to bear on archival data in terms of an ‘insurance imaginary’. However, little attention is paid to the political and broader governmental conditions upon which actuarialism rests. Analysis of fire insurance in Australia indicates that despite urgings from other branches of insurance, the industry did not go down this ‘scientific’ track until well into the twentieth century. Instead, it relied on detailed individual inspection by insurance agents and a process of ‘cumulative dangerousness’ – adding up the multiple hazards discovered in each case and using this as a guide to setting premiums. The result was slow, expensive and cumbersome. But the industry was forced to adopt this approach because the built environment in Australian cities was so underregulated that nothing could be taken for granted. Only when adequately designed and enforced government regulations began to appear after the mid-1920s could fire insurance adopt actuarial techniques for economising uncertainty.  相似文献   

7.
Mechanical properties of wood at different length scales of its hierarchical structure are governed by structural and compositional properties on smaller length scales. This opens up the possibility to use microstructural data for estimating mechanical properties, which are difficult to assess by conventional, destructive testing but are nevertheless of high relevance for conservation practice. Herein, we investigate such microstructure-mechanics relationships for a particular example, namely the load bearing archaeological oak of the Oseberg Viking ship, displayed at the Viking Ship Museum in Oslo, Norway. In order to identify the effects of degradation on the mechanical behavior and their relations to the microstructure, recent oak specimens of different geographical origin (Norway and Austria) are investigated as well. Wood exhibits a cellular structure. Its cell walls are composed of an amorphous polymer matrix consisting of lignin and hemicelluloses and embedded, stiff cellulose fibers. At the cell level, experimental studies comprised microscopic investigations of the cellular structure, chemical analyses of the composition of the cell walls, as well as nanoindentation tests on single cell walls. The same samples were also analyzed on the macroscopic level, where additionally mass density and annual ring data were measured together with ultrasonic stiffnesses. The chemical data clearly indicate deterioration in the archaeological oak, affecting mainly hemicelluloses and amorphous cellulose. At the cell wall scale, however, this does not necessarily lead to a weaker material behavior. The nanoindentation modulus, as a measure of the cell wall stiffness, was found to even increase. This is counterintuitive to our understanding of the effects of chemical degradation. It might be due to possible modification of lignin in the Oseberg oak, and thus have a stronger effect on the indentation modulus than the concurrent weakening of the interfaces between the load-carrying cellulose fibers and the connecting cell wall matrix when analyzing wood at the microscopic level. A similar effect is also observed for the transversal stiffness of macroscopic samples, which increases. In tension-dominated loading modes, however, the degradation of the interfaces is the dominant effect, resulting for example in a considerable reduction of the macroscopic stiffness in longitudinal direction. This underlines the utmost relevance of the loading condition on the remaining load-carrying capacity of degraded wood. On the macroscale, effects of the geographical origin (i.e. growth conditions) on ring characteristics of the oak tissues override the effects of degradation on the mechanical behavior. They have to be carefully extracted in order to come up with conclusions on the effect of degradation from macroscopic test results. The identified microstructure-mechanics relationships provide the basis for–in further research steps–building mathematical models describing the relations between microstructural characteristics and macroscopic mechanical properties and, thereon, for structural analyses of historical wooden objects.  相似文献   

8.
This paper aims to view the implications of an identification of wood species found during an archaeological excavation on a medieval church building and a surrounding graveyard at Thorarinsstadir in Seydisfjordur, east Iceland. The excavation in Seydisfjördur is a part of a project entitled ‘The transition from paganism to Christianity in Iceland’ sponsored by The East Iceland Heritage Museum, the Research Council of Iceland and The European Commission. It started in 1997 and from 1998 it has been a part of the PARABOW project, in the frame of the Raphael project. The project involves archaeological researches on pagan and Christian remains from the early medieval times in Iceland. The aim is to examine the origin and development of the Christian religion in Iceland. Furthermore, it is the intention to investigate how Christianity evolved alongside paganism assuming the conversion to Christianity was a long process, climaxing in the year 1000 when Christianity was adopted as a national religion. The wood identification uncovered evidence concerning church architecture, limiting actors for building traditions, Icelandersˈ ritual practices as well as their contacts with the foreign countries during the Viking Age and early medieval times. It did show that the native species were mainly used as fuel but drift timber was probably mainly used for construction purposes and for making coffins. According to the results from the wood identification, for instance, the excavation at Thorarinsstadir in Seydisfjördur revealed a wooden church made of drift timber.  相似文献   

9.
大运河苏北区域层面的空间认识与架构不仅关系到自身人居生态特色打造,更关乎文化带建设的整体格局。通过对苏北水文化景观格局形成过程及成因的分析,建立苏北水文化与大运河文化的认识统一性。苏北水文化景观系统是以大运河开凿、维系为引擎,经历漫长历史进程形成的。大运河以及与之有着密切关联的水利、聚落、农业等遗产以及水系、历史地貌要素都是苏北水文化景观系统的重要构成和历史基础。同时,这个系统也是见证大运河发展及其影响的物证条件和大运河文化带、国家文化公园建设的空间依托。苏北水文化与大运河文化资源的保护、利用、融合,可以更好地实现彼此涵括构建、内涵诠释以及建设绩效的释放。  相似文献   

10.
Selected copper alloy artefacts from the collection of the Umm Qais museum at Irbid, Jordan, were studied by SEM-EDS analysis, while in situ analyses were performed by means of portable μ-XRF and LIBS spectrometers. Analysis and characterization of base metal and corrosion products of the copper alloyed artefacts were performed in relation to the environmental conditions of the display and as part of the overall assessment of the museum environment. Findings of this study are directed towards guiding a preventive conservation strategy for the copper alloyed artefacts at the Umm Qais museum.  相似文献   

11.
This study is aimed at an assessment of the properties of two polymeric products applied to Norway spruce (Picea abies) and White poplar (Populus alba) wood species. It contributes to ongoing research experiments on the consolidating properties of two synthetic resins and their potential synergic action on wood, resulting from their different interaction with the substrate: Paraloid B72 and Regalrez 1126. Experiments were carried out on a series of samples of the two wood varieties. The consolidants were applied alone and one after the other, with one coat of Regalrez and then one of Paraloid. Porosity and variations in pore size distribution were ascertained by mercury intrusion porosimetry (MIP). Colorimetric and IR spectroscopic measurements were also taken before and after aging by solar radiation and freeze/thaw cycles, to verify the possible slowing of photodegradation of the treated wood and the consolidating resistance. Results confirm that both products penetrate the wood with a different behaviour. After double treatment with Regalrez + Paraloid, a significant advantage was observed in terms of mechanical resistance and pore size distribution, although no advantages as regards resistance to photo-oxidizing processes or colour changes were observed.  相似文献   

12.
This paper deals with the comparative evaluation of different procedures of salt extraction designed for archaeological ceramics from submarine burial environments. The experimental work was carried out on a particular type of late-Roman cooking ware finds (Pantellerian ware) found in a shipwreck near the shoreline of the Island of Pantelleria (Sicily). The studied ceramic test-pieces were first recognised in terms of bulk characteristics (mineralogy, petrography and chemistry). SEM-EDS observation allowed verification of the presence of various secondary minerals at the surface and in the pore spaces formed after the prolonged permanence in seawater under oxidising or reducing conditions. Pore-size distribution was also determined in the same fragments that had been subjected to the salt extraction routines. Three salt extraction methods were tested: two methods based on diffusion processes (water immersion under stationary conditions and under mechanical stirring conditions) and one method based on both diffusive and advective processes (multiple packages of sepiolite). The obtained experimental data allowed us to identify strengths and weaknesses of the tested procedures with practical spin-off for archaeologists and restorers (efficiency, kinetics, compatibility with the ceramic substrate, costs and simplicity of use). Salt extraction under mechanical stirring was the most effective method and, for this reason, is suitable for laboratory fieldwork during or immediately after submarine archaeological excavations. Similar advantages are also intended for the preliminary treatments of the most precious findings prior to museum storage.  相似文献   

13.
The effects of a Q-switched Nd:YAG laser irradiation on a group of supports, painted with six different inorganic pigments, was investigated. The pigments were chosen from among the most utilized on painted historical surfaces: red ochre, yellow ochre, chromium green, ultramarine azure, white chalk and carbon black, and they were distempered with two binders – linseed oil and gypsum – on primed wood panels. The pigments were characterized by means of X-ray diffraction and Fourier transform infrared spectroscopy. Chromatic characteristics, chemical composition and surface morphology of the painted layers were investigated before and after the laser irradiation. Three different fluences were used to detect the correlation between laser parameters and changes in painting layer characteristics.  相似文献   

14.
The experimental procedures and most important conclusions of the first on-site Raman study of the stained glass windows in the upper chapel of the Sainte-Chapelle, Paris are discussed. Some of the windows suffered damage during/after the French Revolution and were partly restored in the 19th century. Measurements were performed with a new portable Raman instrument on colourless, blue and green stained glasses. We illustrate how the Raman signature of the glass makes it possible to distinguish between medieval K/Ca or 19th century restored Na/Ca-based silicates and to determine their weathering degree. This is achieved by means of the extraction of vibrational parameters and then processing them, using chemometric approaches, principal components and cluster variation analyses with varying degrees of complexity. The Raman scattering intensity of weathered glasses is used to determine their relative age. The results differ from those presented in the Corpus Vitrearum Medii Aevi (obtained by visual inspection) and therefore demonstrate the need for updating these reports with modern methods such as in situ Raman spectroscopy.  相似文献   

15.
During the excavation of the Etruscan and Roman harbour of Pisa, several shipwrecks were found. The wooden timbers constituting the ship C and ship F (which date back to the first and the second century A.D., respectively, as attested by archaeological findings) were selected in order to collect information about the technological knowledge of the time. Pinus pinaster Aiton was essentially utilised for the planking of ship C and Quercus sp. caducifolia for that of ship F. The choice of timber for the other parts of ship C hull was much more differentiated. Ship C seems to be built in a careful way and its characteristics when added to its overall lightness, seem to reflect its use as a higher capacity boat built for sea sailing. Ship F seems more linked to short voyages in inner fresh waters. The utilisation of different woods was linked not only to the technological characteristics of wood, but also to their easy availability. Palynological analysis, carried out on the clay sediments embedding the shipwrecks, has shown that the flora of Pisa area in that time period would have allowed the acquisition of all the timber species used for both the ships’ construction, with the exception of the fig wood. However, a foreign origin of the timber from somewhere else in the Northern Mediterranean area has not been excluded.  相似文献   

16.
The aim of the work is to set up a methodological approach to verify the effectiveness of the treatments of decayed waterlogged archaeological wood and to point out the proper thermo-hygrometric conditions for its preservation after treatment. The treatments were performed on wood samples of maritime pine (Pinus pinaster Aiton), oak (Quercus sp. caducifolia), elm (Ulmus cf. minor) and strawberry tree (Arbutus unedo L.), obtained from stems pertaining to the original vegetation found in the excavation site of the Ancient Ships in Pisa (Italy), and dated from seventh century BC to second century AD The utilised products were: Polyethylene Glycols (PEG) of various molecular weights, a Polypropylene Glycol (PPG 425), Trehalose (α-D-glucopyranosyl-α-D-glucopyranoside), and their mixtures, and also a Hydroxypropylcellulose (Klucel). The main objective to be pursued by the treatments was considered the stabilisation of the original size and shape of samples. The various steps of this approach were: the execution of a preliminary diagnostic survey on untreated samples; the characterisation of treatment solutions ‘as such’ to establish the property to be monitored during the treatment; the evaluation of the main physical characteristics of wood after the treatment were determined. Among the latter, the coefficient of dimensional stability during the exposure to a series of selected thermo-hygrometric conditions and the retention of consolidants after the treatment. These two measurements allowed the definition of the ‘efficacy of a treatment’, φT, a new parameter firstly utilised in this work. It measures the stabilisation capability of the percent unit of retained product, and its value permits to put in evidence the consolidants that stabilise wood with the lowest amount of product. Conversely, it was not possible to measure the Anti-Shrink Efficiency (ASE), one of the most utilised parameters for the evaluation of treatments, because of the serious distortions and fractures observed in all the heavily degraded untreated samples.  相似文献   

17.
Wood identification is a basic information that should interest any wooden artefact. This typically involves invasive sampling, but sometimes sampling is unattainable either because of the object typology or because it is difficult to obtain authorizations. In the present study, reflected light microscopy potential as a non-invasive identification tool for wooden cultural artefacts is assessed on a number of marquetry furniture and small wood carvings. In more than one half of the 13 examined cases accurate wood identification was possible, while the remaining cases yielded information of diagnostic value, making it possible to exclude several potential candidate species. In a number of cases the use of optical filters improved the visibility of character states. Shape and orientation of surfaces influenced the visibility of microscopic characters. The study confirms that reflected light microscopy is a valuable tool for non-invasive wood identification. In many cases it is able to support accurate identification, in others it can anyway provide important information, useful to help decision about supposed species, or to limit the invasiveness of possible further analysis by addressing them on specific features.  相似文献   

18.
Historic buildings are of great cultural, research and aesthetic value, and they can reveal past events and developments. Tianjin, an ancient city originated from Yuan dynasty, is famous for its Group-living Yards. Derived from settlements in foreign concession districts, these Yards exhibit different building styles and are now an integral part of Tianjin's cultural heritage. However, many of these buildings disappeared due to the ravages of frequent fire disasters. To protect Group-living Yards and to alleviate fire losses, fire hazard survey was conducted. Then corresponding control and mitigation methods were proposed. Yuan Residence, one of the typical Group-living Yards, was employed as an example to demonstrate the availability of the methods proposed by using fire dynamics simulator. Finally, comprehensive suggestions and disaster mitigation methods were given for Group-living Yards in Tianjin, which gives guidance on developing policies and procedures for incorporating fire prevention and protection features into these buildings.  相似文献   

19.
A broad category of cultural heritage objects are multilayer structures composed of organic, humidity-sensitive materials – wood, animal glue, paper, leather, bone or paints. They respond to variations in relative humidity (RH) in their environment by cyclically gaining and losing moisture, and consequently swelling and shrinking. Differences in the moisture response of the materials induce internal stresses in the individual layers of the structures, which cause objects to deform and crack. Polychrome wood is examined in detail. The cumulative physical damage of the design layer on wood due to repeated RH variations is quantified in terms of their magnitude and number of times they occur. The climatological risk index for accumulated, ‘fatigue’ damage is established, using a procedure to reduce irregular real-world climate histories into simple RH cycles of known damage impact. Using output from the Hadley Model (HadCM3) and simple transfer functions predicting indoor temperature and RH from outdoor climate, changes in the indoor climate through to 2100 were forecast for unheated buildings. European maps highlighting the areas in which painted wood may be significantly affected by climate change are presented.  相似文献   

20.
Waterlogged wood samples of Ulmus sp. and Fraxinus sp. from the ancient harbor of Otranto in Southern Italy were radiocarbon dated by accelerator mass spectrometry (AMS) and examined for physical and chemical changes to assess the degree of degradation. The analyzed woods were dated to the 2nd half of the twelfth – 1st half of the thirteenth centuries AD. The results of all the used methods (maximum water content, basic density, shrinkage, XRD analysis and holocellulose content) indicated a low level of degradation in the inner part of the wooden find. The outer and middle part, on the other hand, showed a greater degradation level. An important result is the identification of a not homogeneous degradation in the different parts of the examined wooden block, which will affect the design of the consolidating treatment.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号