共查询到20条相似文献，搜索用时 93 毫秒
1.
BackgroundSalep is obtained by grinding dried orchid tubers and used as a valuable ingredient in the food industry. Because of the glucomannan content of salep, it is thought to have prebiotic potential. However, there is little information in studies concerning the fermentation characteristics and potential prebiotic properties of salep. The objective of this study was to investigate the effect of salep on bifidobacterial growth by measuring the highest optical density (OD), calculating the specific growth rates, and determining the production of lactic acid and short-chain fatty acids (acetic, propionic, and butyric acid) as a result of bacterial fermentation.ResultThe OD and pH values obtained in this study showed that salep was utilized as a source of assimilable carbon and energy by the Bifidobacterium species (BS). All Bifidobacterium strains produced lactic, acetic, propionic, and butyric acid, indicating that salep is readily fermented by these bacteria. Salep at 1% (w/v) showed a similar effect on bifidobacterial growth as that promoted by 1% (w/v) glucose used as a traditional carbon source.ConclusionsBifidobacterium species can develop in media containing salep as well as in glucose and exhibit the potential to be used as new sources of prebiotics.How to cite: Usta-Gorgun B, Yilmaz-Ersan L. Short-chain fatty acid production by the Bifidobacterium species in the presence of salep. Electron J Biotechnol 2020;47. https://doi.org/10.1016/j.ejbt.2020.06.004. 相似文献
2.
BackgroundHong Qu glutinous rice wine (HQGRW) is brewed under non-aseptic fermentation conditions, so it usually has a relatively high total acid content. The aim of this study was to investigate the dynamics of the bacterial communities and total acid during the fermentation of HQGRW and elucidate the correlation between total acid and bacterial communities.ResultsThe results showed that the period of rapid acid increase during fermentation occurred at the early stage of fermentation. There was a negative response between total acid increase and the rate of increase in alcohol during the early fermentation stage. Bacterial community analysis using high-throughput sequencing technology was found that the dominant bacterial communities changed during the traditional fermentation of HQGRW. Both principal component analysis (PCA) and hierarchical clustering analysis revealed that there was a great difference between the bacterial communities of Hong Qu starter and those identified during the fermentation process. Furthermore, the key bacteria likely to be associated with total acid were identified by Spearman's correlation analysis. Lactobacillus, unclassified Lactobacillaceae, and Pediococcus were found, which can make significant contributions to the total acid development (| r | > 0.6 with FDR adjusted P < 0.05), establishing that these bacteria can associate closely with the total acid of rice wine.ConclusionsThis was the first study to investigate the correlation between bacterial communities and total acid during the fermentation of HQGRW. These findings may be helpful in the development of a set of fermentation techniques for controlling total acid.How to cite: Liang Z, Lin X, He Z, et al. Dynamic changes of total acid and bacterial communities during the traditional fermentation of Hong Qu glutinous rice wine. Electron J Biotechnol 2020;43. https://doi.org/10.1016/j.ejbt.2019.12.002 相似文献
3.
BackgroundTraditionally, microbial genome sequencing has been restrained to the species grown in pure culture. The development of culture-independent techniques over the last decade allows scientists to sequence microbial communities directly from environmental samples. Metagenomics is the study of complex genome by the isolation of DNA of the whole community. Next generation sequencing (NGS) of metagenomic DNA gives information about the microbial and taxonomical characterization of a particular niche. The objective of the present research is to study the microbial and taxonomical characterization of the metagenomic DNA, isolated from the frozen soil sample of a glacier in the north western Himalayas through NGS.ResultsThe glacier community comprised of 16 phyla with the representation of members belonging to Proteobacteria and Acidobacteria. The number of genes annotated through the Kyoto Encyclopedia of Genes and Genomes (KEGG), GO, Pfam, Clusters of Orthologous Groups of proteins (COGs), and FIG databases were generated by COGNIZER. The annotation of genes assigned in each group from the metagenomics data through COG database and the number of genes annotated in different pathways through KEGG database were reported.ConclusionResults indicate that the glacier soil taken in the present study, harbors taxonomically and metabolically diverse communities. The major bacterial group present in the niche is Proteobacteria followed by Acidobacteria, and Actinobacteria, etc. Different genes were annotated through COG and KEGG databases that integrate genomic, chemical, and systemic functional information.How to cite: Gupta V, Singh I, Rasool S, et al. Next Generation sequencing and microbiome’s taxonomical characterization of frozen soil of North Western Himalayas of Jammu and Kashmir, India. Electron J Biotechnol 2020;45. https://doi.org/10.1016/j.ejbt.2020.03.003. 相似文献
4.
《Electronic Journal of Biotechnology》2014,17(6):322-328
BackgroundThe production of biofuels from renewable energy sources is one of the most important issues in industrial biotechnology today. The process is known to generate various by-products, for example crude glycerol, which is obtained in the making of biodiesel from rapeseed oil. Crude glycerol may be utilized in many ways, including microbial conversion to 1,3-propanediol (1,3-PD), a raw material for the synthesis of polyesters and polyurethanes.ResultsThe paper presents results of a study on the synthesis of 1,3-propanediol from crude glycerol by a repeated batch method with the use of Clostridium butyricum DSP1. Three cycles of fermentation medium replacement were carried out. The final concentration of 1,3-PD was 62 g/L and the maximum productivity, obtained during the second cycle, reached 1.68 g/L/h. Additionally, experiments conducted in parallel to the above involved using the entire quantity of the culture broth removed from the bioreactor to inoculate successive portions of fermentation media containing crude glycerol at concentrations of 80 g/L and 100 g/L. Under those conditions, the maximum 1,3-PD concentrations were 43.2 g/L and 54.2 g/L.ConclusionsThe experiments proved that by using a portion of metabolically active biomass as inoculum for another fermentation formula it is possible to eliminate the stage of inoculum growth and thereby reduce the length of the whole operation. Additionally, that strategy avoids the phase of microbial adaptation to a different source of carbon such as crude glycerol, which is more difficult to utilize, thus improving the kinetic parameters of 1,3-PD production. 相似文献
5.
Establishment of a production process for a novel vaccine candidate against Lawsonia intracellularis
BackgroundLawsonia intracellularis remains a problem for the swine industry worldwide. Previously, we designed and obtained a vaccine candidate against this pathogen based on the chimeric proteins: OMP1c, OMP2c, and INVASc. These proteins formed inclusion bodies when expressed in E. coli, which induced humoral and cellular immune responses in vaccinated pigs. Also, protection was demonstrated after the challenge. In this study, we established a production process to increase the yields of the three antigens as a vaccine candidate.ResultsBatch and fed-batch fermentations were evaluated in different culture conditions using a 2 L bioreactor. A fed-batch culture with a modified Terrific broth medium containing glucose instead of glycerol, and induced with 0.75 mM IPTG at 8 h of culture (11 g/L of biomass) raised the volumetric yield to 627.1 mg/L. Under these culture conditions, plasmid-bearing cells increased by 10% at the induction time. High efficiency in cell disruption was obtained at passage six using a high-pressure homogenizer and a bead mill. The total antigen recovery was 64% (400 mg/L), with a purity degree of 70%. The antigens retained their immunogenicity in pigs, inducing high antibody titers.ConclusionsConsidering that the antigen production process allowed an increment of more than 70-fold, this methodology constitutes a crucial step in the production of this vaccine candidate against L. intracellularis.How to cite: Salazar S, Gutiérrez N, Sánchez O, et al. Establishment of a production process for a novel vaccine candidate against Lawsonia intracellularis. Electron J Biotechnol 2021.https://doi.org/10.1016/j.ejbt.2021.01.002 相似文献
6.
BackgroundLXYL-P1-2 is the first reported glycoside hydrolase that can catalyze the transformation of 7-β-xylosyl-10-deacetyltaxol (XDT) to 10-deacetyltaxol (DT) by removing the d-xylosyl group at the C-7 position. Successful synthesis of paclitaxel by one-pot method combining the LXYL-P1-2 and 10-deacetylbaccatin III-10-β-O-acetyltransferase (DBAT) using XDT as a precursor, making LXYL-P1-2 a highly promising enzyme for the industrial production of paclitaxel. The aim of this study was to investigate the catalytic potential of LXYL-P1-2 stabilized on magnetic nanoparticles, the surface of which was modified by Ni2+-immobilized cross-linked Fe3O4@Histidine.ResultsThe diameter of matrix was 20–40 nm. The Km value of the immobilized LXYL-P1-2 catalyzing XDT (0.145 mM) was lower than that of the free enzyme (0.452 mM), and the kcat/Km value of immobilized enzyme (12.952 mM s−1) was higher than the free form (8.622 mM s−1). The immobilized form maintained 50% of its original activity after 15 cycles of reuse. In addition, the stability of immobilized LXYL-P1-2, maintained 84.67% of its initial activity, improved in comparison with free form after 30 d storage at 4°C.ConclusionsThis investigation not only provides an effective procedure for biocatalytic production of DT, but also gives an insight into the application of magnetic material immobilization technology.How to citeZou S, Chen TJ, Li DY, et al. LXYL-P1-2 immobilized on magnetic nanoparticles and its potential application in paclitaxel production. Electron J Biotechnol 2021;50.https://doi.org/10.1016/j.ejbt.2020.12.005 相似文献
7.
BackgroundPhospholipase D (PLD) is used as the biocatalyst for phosphatidylserine (PS) production. In general, PLD was expressed in insoluble form in Escherichia coli. High-level soluble expression of PLD with high activity in E. coli is very important for industrial production of PLD.ResultsStreptomyces chromofuscus PLD coding gene was codon-optimized, cloned without signal peptide, and expressed in E. coli. The optimal recombinant E. coli pET-28a+PLD/BL21(DE3) was constructed with pET-28a without His-tag. The highest PLD activity reached 104.28 ± 2.67 U/mL in a 250-mL shake flask after systematical optimization. The highest PLD activity elevated to 122.94 ± 1.49 U/mL by feeding lactose and inducing at 20°C after scaling up to a 5.0-L fermenter. Substituting the mixed carbon source with 1.0 % (w/v) of cheap dextrin and adding a feeding medium could still attain a PLD activity of 105.81 ± 2.72 U/mL in a 5.0-L fermenter. Fish peptone from the waste of fish processing and dextrin from the starch are both very cheap, which were found to benefit the soluble PLD expression.ConclusionsAfter combinatorial optimization, the high-level soluble expression of PLD was fulfilled in E. coli. The high PLD activity along with cheap medium obtained at the fermenter level can completely meet the requirements of industrial production of PLD.How to cite: Wu R, Cao J, Liu F, et al. High-level soluble expression of phospholipase D from Streptomyces chromofuscus in Escherichia coli by combinatorial optimization. Electron J Biotechnol 2021;50.https://doi.org/10.1016/j.ejbt.2020.12.002 相似文献
8.
BackgroundPyruvic acid (PA), a vital α-oxocarboxylic acid, plays an important role in energy and carbon metabolism. The oleaginous yeast Yarrowia lipolytica (Y. lipolytica) has considerable potential for the production of PA. An increased NaCl concentration reportedly increases the biomass and PA yield of Y. lipolytica.ResultsTo increase the yield of PA, the NaCl-tolerant Y. lipolytica A4 mutant was produced using the atmospheric and room temperature plasma method of mutation. The A4 mutant showed growth on medium containing 160 g/L NaCl. The PA yield of the A4 mutant reached 97.2 g/L at 120 h (0.795 g/g glycerol) in a 20-L fermenter with glycerol as the sole carbon source, which was 28.9% higher than that of the parental strain.ConclusionThe PA yield from Y. lipolytica can be improved by increasing its NaCl tolerance.How to cite: Yuan W, Lin X, Zhong S, et al. Enhanced pyruvic acid yield in an osmotic stress-resistant mutant of Yarrowia lipolytica. Electron J Biotechnol 2020;44. https://doi.org/10.1016/j.ejbt.2020.01.002. 相似文献
9.
10.
BackgroundProdigiosin has been demonstrated to be an important candidate in investigating anticancer drugs and in many other applications in recent years. However, industrial production of prodigiosin has not been achieved. In this study, we found a prodigiosin-producing strain, Serratia marcescens FZSF02, and its fermentation strategies were studied to achieve the maximum yield of prodigiosin.ResultsWhen the culture medium consisted of 16.97 g/L of peanut powder, 16.02 g/L of beef extract, and 11.29 mL/L of olive oil, prodigiosin reached a yield of 13.622 ± 236 mg/L after culturing at 26 °C for 72 h. Furthermore, when 10 mL/L olive oil was added to the fermentation broth at the 24th hour of fermentation, the maximum prodigiosin production of 15,420.9 mg/L was obtained, which was 9.3-fold higher than the initial level before medium optimization. More than 60% of the prodigiosin produced with this optimized fermentation strategy was in the form of pigment pellets. To the best of our knowledge, this is the first report on this phenomenon of pigment pellet formation, which made it much easier to extract prodigiosin at low cost. Prodigiosin was then purified and identified by absorption spectroscopy, HPLC, and LCMS. Purified prodigiosin obtained in this study showed anticancer activity in separate experiments on several human cell cultures: A549, K562, HL60, HepG2, and HCT116.ConclusionsThis is a promising strain for producing prodigiosin. The prodigiosin has potential in anticancer medicine studies.How to cite: Lin C, Jia X, Fang Y, et al. Enhanced production of prodigiosin by Serratia marcescens FZSF02 in the form of pigment pellets. Electron J Biotechnol 2019;40. https://doi.org/10.1016/j.ejbt.2019.04.007 相似文献
11.
《Electronic Journal of Biotechnology》2014,17(2):72-78
Background1,3-Propanodiol (1,3-PD), is used in the production of polytrimethylene terephthalate (PTT), an aromatic polyester that exhibits high elastic recoveries. It is also employed as a supplement with low solidification properties, a solvent and a lubricant in the formof propylene glycol. 1,3-PD is effectively synthesized by a microbiological way from crude glycerol. The main problem of this technology is using a high concentration of glycerol, which is a limiting factor for bacteria cells growth (especially in batch fermentation).ResultsIn this work, the influence of different glycerol concentration in batch fermentation on Clostridium butyricum DSP1 metabolism was investigated. The biomass was concentrated for two times with the use of membrane module (in case of increasing kinetic parameters). Increased optical density of bacteria cells six times increased the productivity of 1,3-PD in cultivation with 20 g/L of glycerol at the beginning of the process, and more than two times in cultivation with 60–80 g/L. Also the possibility of complete attenuation of 140 g/L of crude glycerol in the batch fermentation was investigated. During the cultivation, changes of protein profiles were analyzed. The most significant changes were observed in the cultivation in the medium supplemented with 80 g/L of glycerol. They related mainly to the DNA protein reconstructive systems, protective proteins (HSP), and also the enzymatic catalysts connected with glycerol metabolic pathway.ConclusionsThe application of filtration module in batch fermentation of crude glycerol by C. butyricum DSP1 significantly increased the productivity of the process. 相似文献
12.
BackgroundMilk whey, a byproduct of the dairy industry has a negative environmental impact, can be used as a raw material for added-value compounds such as galactooligosaccharides (GOS) synthesis by β-galactosidases.ResultsB-gal42 from Pantoea anthophila strain isolated from tejuino belonging to the glycosyl hydrolase family GH42, was overexpressed in Escherichia coli and used for GOS synthesis from lactose or milk whey. Crude cell-free enzyme extracts exhibited high stability; they were employed for GOS synthesis reactions. In reactions with 400 g/L lactose, the maximum GOS yield was 40% (w/w) measured by HPAEC-PAD, corresponding to 86% of conversion. This enzyme had a strong predilection to form GOS with β(1 → 6) and β(1 → 3) galactosyl linkages. Comparing GOS synthesis between milk whey and pure lactose, both of them at 300 g/L, these two substrates gave rise to a yield of 38% (60% of lactose conversion) with the same product profile determined by HPAEC-PAD.ConclusionsB-gal42 can be used on whey (a cheap lactose source) to produce added value products such as galactooligosaccharides.How to cite: Yañez-Ñeco CV, Cervantes FV, Amaya-Delgado L, et al. Synthesis of β(1→3) and β(1→6) galactooligosaccharides from lactose and whey using a recombinant β-galactosidase from Pantoea anthophila. Electron J Biotechnol 2021;49. https://dx.doi.org/10.1016/j.ejbt.2020.10.004 相似文献
13.
14.
BackgroundFermentation strategies for bioethanol production that use flocculating Saccharomyces cerevisiae yeast need to account for the mechanism by which inhibitory compounds, generated in the hydrolysis of lignocellulosic materials, are tolerated and detoxified by a yeast floc.ResultsDiffusion coefficients and first-order kinetic bioconversion rate coefficients were measured for three fermentation inhibitory compounds (furfural, hydroxymethylfurfural, and vanillin) in self-aggregated flocs of S. cerevisiae NRRL Y-265. Thièle-type moduli and internal effectiveness factors were obtained by simulating a simple steady-state spherical floc model.ConclusionsThe obtained values for the Thiéle moduli and internal effectiveness factors showed that the bioconversion rate of the inhibitory compounds is the dominant phenomenon over mass transfer inside the flocs.How to cite: Landaeta R, Acevedo F, Aroca G. Effective diffusion coefficients and bioconversion rates of inhibitory compounds in flocs of Saccharomyces cerevisiae. Electron J Biotechnol 2019;42. https://doi.org/10.1016/j.rjbt.2019.08.001 相似文献
15.
BackgroundEthanol concentration (PE), ethanol productivity (QP) and sugar consumption (SC) are important values in industrial ethanol production. In this study, initial sugar and nitrogen (urea) concentrations in sweet sorghum stem juice (SSJ) were optimized for high PE (≥ 10%, v/v), QP, (≥ 2.5 g/L·h) and SC (≥ 90%) by Saccharomyces cerevisiae SSJKKU01. Then, repeated-batch fermentations under normal gravity (NG) and high gravity (HG) conditions were studied.ResultsThe initial sugar at 208 g/L and urea at 2.75 g/L were the optimum values to meet the criteria. At the initial yeast cell concentration of ~ 1 × 108 cells/mL, the PE, QP and SC were 97.06 g/L, 3.24 g/L·h and 95.43%, respectively. Repeated-batch fermentations showed that the ethanol production efficiency of eight successive cycles with and without aeration were not significantly different when the initial sugar of cycles 2 to 8 was under NG conditions (~ 140 g/L). Positive effects of aeration were observed when the initial sugar from cycle 2 was under HG conditions (180–200 g/L). The PE and QP under no aeration were consecutively lower from cycle 1 to cycle 6. Additionally, aeration affected ergosterol formation in yeast cell membrane at high ethanol concentrations, whereas trehalose content under all conditions was not different.ConclusionInitial sugar, sufficient nitrogen and appropriated aeration are necessary for promoting yeast growth and ethanol fermentation. The SSJ was successfully used as an ethanol production medium for a high level of ethanol production. Aeration was not essential for repeated-batch fermentation under NG conditions, but it was beneficial under HG conditions.How to cite: Sriputorn B, Laopaiboon P, Phukoetphim N, et al. Enhancement of ethanol production efficiency in repeated-batch fermentation from sweet sorghum stem juice: Effect of initial sugar, nitrogen and aeration. Electron J Biotechnol 2020;46. https://doi.org/10.1016/j.ejbt.2020.06.001 相似文献
16.
BackgroundThe use of agro-industrial wastes to produce high value-added biomolecules such as biosurfactants is a promising approach for lowering the total costs of production. This study aimed to produce biosurfactants using Rhizopus arrhizus UCP 1607, with crude glycerol (CG) and corn steep liquor (CSL) as substrates. In addition, the biomolecule was characterized, and its efficiency in removing petroderivatives from marine soil was investigated.ResultsA 22 factorial design was applied, and the best condition for producing the biosurfactant was determined in assay 4 (3% CG and 5% CSL). The biosurfactant reduced the surface tension of water from 72 to 28.8 mN/m and produced a yield of 1.74 g/L. The preliminary biochemical characterization showed that the biosurfactant consisted of proteins (38.0%), carbohydrates (35.4%), and lipids (5.5%). The compounds presented an anionic character, nontoxicity, and great stability for all conditions tested. The biomolecule displayed great ability in dispersing hydrophobic substrates in water, thereby resulting in 53.4 cm2 ODA. The best efficiency of the biosurfactant in removing the pollutant diesel oil from marine soil was 79.4%.ConclusionsThis study demonstrated the ability of R. arrhizus UCP1607 to produce a low-cost biosurfactant characterized as a glycoprotein and its potential use in the bioremediation of the hydrophobic diesel oil pollutant in marine soil.How to cite: Pele MA, Ribeaux DR, Vieira ER, et al. Conversion of renewable substrates for biosurfactant production by Rhizopus arrhizus UCP 1607 and enhancing the removal of diesel oil from marine soil. Electron J Biotechnol 2019;38. https://doi.org/10.1016/j.ejbt.2018.12.003. 相似文献
17.
BackgroundSugars from sweet sorghum stalks can be used to produce ethanol and also to grow oleaginous yeasts. Instead of two separate processes, in this paper we propose a different route producing ethanol and microbial oil in two consecutive fermentation steps.ResultsThree yeasts were compared in the first ethanol producing step. In the second step four different oleaginous yeasts were tested. Sweet sorghum juice was first clarified and concentrated. High gravity ethanol fermentation was carried out with concentrated juice with 23.7 g/100 mL of total sugars and without added nutrients. Total sugars were 2.5 times more than the original clarified juice. One yeast gave the best overall response over the two other tested; relative high ethanol productivity, 1.44 g ethanol/L·h−1, and 90% of sugar consumption. Aeration by flask agitation produced superior results than static flasks for all yeasts. Microbial oil production was done employing the residual liquid left after ethanol separation. The pooled residual liquid from the ethanol distillation contained 7.08 g/mL of total carbohydrates, rich in reducing sugars. Trichosporon oleaginosus and Lipomyces starkeyi produced higher dry biomass, total sugar consumption and oil productivity than the other two oleaginous yeasts tested; with values around 25 g/L, 80%, and 0.55 g oil/L·h−1 respectively. However, the biomass oil content in all yeasts was relatively low in the range of 14 to 16%.ConclusionThe two step process is viable and could be considered an integral part of a consolidated biorefinery from sweet sorghum.How to cite: Rolz C, de León R, Mendizábal de Montenegro AL. Co-production of ethanol and biodiesel from sweet sorghum juice in two consecutive fermentation steps. Electron J Biotechnol 2019;41. https://doi.org/10.1016/j.ejbt.2019.05.002. 相似文献
18.
BackgroundIn order to produce an effective callus in Echinacea purpurea L.; determination of the explant type and growth regulators that best respond to callus induction and the optimization of the culture conditions to increase the amount of caffeic acid derivatives (CADs) in the obtained callus. CADs contents of callus cultures of E. purpurea were evaluated by establishing an effective callus induction system in vitro.ResultsVarious medium containing different growth regulators were tested using leaf, petiole, cotyledon and root as the explants. The best callus development was achieved in MS medium with 1.0 mg l−1 2,4-D + 2.0 mg l−1 BAP in leaf, 1.0 mg l−1 NAA + 0.5 mg l−1 TDZ in petiole, 2.0 mg l−1 NAA + 1.0 mg l−1 TDZ in cotyledon and 0.5 mg l−1 NAA + 0.5 mg l−1 BAP in roots. Upon optimisation of callus growth, each type of explant was cultured for 4, 6, 8 and 10 weeks in medium for the analyses of caftaric acid, chlorogenic acid, caffeic acid and chicoric acid contents. The highest amounts of caftaric acid (4.11 mg/g) and chicoric acid (57.89 mg/g) were found from petiole explants and chlorogenic acid (8.83 mg/g) from root explants at the end of the 10-week culture time.ConclusionsAs a result of the present study, the production of caffeic acid derivatives was performed by providing the optimization of E. purpurea L. callus cultures. Effective and repeatable protocols established in this study may offer help for further studies investigating the production of caffeic acid derivatives in vitro.How to cite: Tanur Erkoyuncu M, Yorgancilar M. Optimization of callus cultures at Echinacea purpurea L. for the amount of caffeic acid derivatives. Electron J Biotechnol 2021;51. https://doi.org/10.1016/j.ejbt.2021.02.003. 相似文献
19.
BackgroundMicrobial oils produced by diverse microorganisms are being considered as alternative sources of triglycerides for biodiesel production. However, the standalone production of biodiesel from microorganisms is not currently economically feasible. In case of yeasts, the use of low-value nutrient sources in microbial production and the implementation of cost-efficient downstream processes could reduce costs and make microbial lipids competitive with other commodity-type oils in biodiesel production. Industrial biodiesel synthesis from oleaginous seeds is currently based on a multistep process. However, a simple process called in situ transesterification (ISTE), which takes place within the biomass without a previous lipid extraction step, is receiving increasing interest. In this work, the optimal conditions for an ISTE process to obtain biodiesel from previously selected oleaginous yeast (Rhodotorula graminis S1/S2) were defined using the response surface methodology (RSM).ResultsUsing the RSM approach, the optimal conditions for the maximum yield with minimum reaction time included a methanol-to-biomass ratio of 60:1, 0.4 M H2SO4, and incubation at 70°C for 3 h. The optimized in situ process yield was significantly higher (123%) than that obtained with a two-step method in which fatty acids from saponifiable lipids were first extracted and then esterified with methanol. The composition of the fatty acid methyl ester mixture obtained from R. graminis S1/S2 by ISTE met Uruguayan standards for biodiesel.ConclusionThe characteristics achieved by the optimized method make microbial oil a potential alternative for biodiesel production from yeast at an industrial scale.How to cite: Martinez-Silveira A, Villarreal R, Garmendia G, et al. Process conditions for a rapid in situ transesterification for biodiesel production from oleaginous yeasts. Electron J Biotechnol 2018;37. https://doi.org/10.1016/j.ejbt.2018.11.006. 相似文献
20.
BackgroundBiotechnological processes are part of modern industry as well as stricter environmental requirements. The need to reduce production costs and pollution demands for alternatives that involve the integral use of agro-industrial waste to produce bioactive compounds. The citrus industry generates large amounts of wastes due to the destruction of the fruits by microorganisms and insects together with the large amounts of orange waste generated during the production of juice and for sale fresh. The aim of this study was used orange wastes rich in polyphenolic compounds can be used as source carbon of Aspergillus fumigatus MUM 1603 to generate high added value compounds, for example, ellagic acid and other molecules of polyphenolic origin through submerged fermentation system.ResultsThe orange peel waste had a high concentration of polyphenols, 28% being condensed, 27% ellagitannins, 25% flavonoids and 20% gallotannins. The major polyphenolic compounds were catechin, EA and quercetin. The conditions, using an experimental design of central compounds, that allow the production of the maximum concentration of EA (18.68 mg/g) were found to be: temperature 30°C, inoculum 2 × 107 (spores/g) and orange peel polyphenols 6.2 (g/L).ConclusionThe submerged fermentation process is an effective methodology for the biotransformation of molecules present in orange waste to obtain high value-added as ellagic acid that can be used as powerful antioxidants, antibacterial and other applications.How to cite: Sepúlveda L, Laredo-Alcalá E, Buenrostro-Figueroa JJ, et al. Ellagic acid production using polyphenols from orange peel waste by submerged fermentation. Electron J Biotechnol 2020;43. https://doi.org/10.1016/j.ejbt.2019.11.002. 相似文献