首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
  相似文献   

2.
  相似文献   

3.
In this study, we measured the vertical and horizontal take-off forces, plantar pressures and activation patterns of four muscles (vastus lateralis, gluteus maximus, tibialis anterior, gastrocnemius) in 10 ski jumpers in simulated laboratory conditions when wearing either training shoes or ski jumping boots. We found significant differences in vertical (P < 0.001), horizontal (P < 0.05) and resultant (P < 0.001) take-off velocities and vertical force impulse (P < 0.01). We found no significant differences in the jumpers' initial take-off positions; however, the jumping boots condition resulted in a smaller displacement in the final position of the following joint angles: ankle angle (P < 0.001), knee angle (P < 0.001), hip angle (P < 0.01) and shank angle relative to the horizontal (P < 0.01). This corresponds with less electromyographic activity during take-off in both the gastrocnemius (300 to 200 ms and 200 to 100 ms before take-off) and gluteus maximus (300 to 200 ms and 100 to 0 ms before take-off). During the early take-off in the jumping boots condition, significantly more pressure was recorded under the heel (P < 0.001), whereas the forefoot was more highly loaded at the end of the take-off. Differences in take-off velocity (representing the final output of the take-off) can be accounted for in the main by the different use of plantar flexion, emphasizing the role of the knee and hip extensors when wearing jumping boots. We conclude that the stiffness of the structure of the jumping boots may result in a forward shift of pressure, thus limiting the effective vertical force. To avoid this pressure shift, the pattern of movement of simulated take-offs should be carefully controlled, particularly when wearing training shoes.  相似文献   

4.
In this study, we measured the vertical and horizontal take-off forces, plantar pressures and activation patterns of four muscles (vastus lateralis, gluteus maximus, tibialis anterior, gastrocnemius) in 10 ski jumpers in simulated laboratory conditions when wearing either training shoes or ski jumping boots. We found significant differences in vertical ( P ? 0.001), horizontal ( P ? 0.05) and resultant ( P ? 0.001) take-off velocities and vertical force impulse ( P ? 0.01). We found no significant differences in the jumpers' initial take-off positions; however, the jumping boots condition resulted in a smaller displacement in the final position of the following joint angles: ankle angle ( P ? 0.001), knee angle ( P ? 0.001), hip angle ( P ? 0.01) and shank angle relative to the horizontal ( P ? 0.01). This corresponds with less electromyographic activity during take-off in both the gastrocnemius (300 to 200 ms and 200 to 100 ms before take-off) and gluteus maximus (300 to 200 ms and 100 to 0 ms before take-off). During the early take-off in the jumping boots condition, significantly more pressure was recorded under the heel ( P ? 0.001), whereas the forefoot was more highly loaded at the end of the take-off. Differences in take-off velocity (representing the final output of the take-off) can be accounted for in the main by the different use of plantar flexion, emphasizing the role of the knee and hip extensors when wearing jumping boots. We conclude that the stiffness of the structure of the jumping boots may result in a forward shift of pressure, thus limiting the effective vertical force. To avoid this pressure shift, the pattern of movement of simulated take-offs should be carefully controlled, particularly when wearing training shoes.  相似文献   

5.
As hill jumps are very time-consuming, ski jumping athletes often perform various imitation jumps during training. The performed jumps should be similar to hill jumps, but a direct comparison of the kinetic and kinematic parameters has not been performed yet. Therefore, this study aimed to correlate 11 common parameters during hill jumps (Oberstdorf Germany), squat jumps (wearing indoor shoes), and various imitation jumps (rolling 4°, rolling flat, static; jumping equipment or indoor shoes) on a custom-built instrumented vehicle with a catch by the coach. During the performed jumps, force and video data of the take-off of 10 athletes were measured. The imitation and squat jumps were then ranked. The main difference between the hill jumps and the imitation and squat jumps is the higher maximal force loading rate during the hill jumps. Imitation jumps performed on a rolling platform, on flat ground were the most similar to hill jumps in terms of the force–time, and leg joint kinematic properties. Thus, non-hill jumps with a technical focus should be performed from a rolling platform with a flat inrun with normal indoor shoes or jumping equipment, and high normal force loading rates should be the main focus of imitation training.  相似文献   

6.
ABSTRACT

Imitation jumps are frequently used in training for ski jumping. Yet, the dynamics of these jumps differ considerably. Thus, the relevance of imitation jumps for ski jumping performance is not elucidated. The aim of this study was to investigate the relationship between the technical execution of imitation jumps and ski jumping performance level. We compared the imitation jumps of 11 ski jumpers of different performance levels using a Spearman correlation transform of time traces of the kinetics (measured using force cells and motion capture) of imitation jumps. The kinetic aspects that were related to performance centred on the moment arm of ground reaction force to the centre of mass before the onset of the push-off, angular momentum early in push-off, thigh angle during the main period of push-off and vertical velocity towards the end of push-off. We propose that the thigh angle may be a key element allowing high development of linear momentum while preparing for appropriate aerodynamic position. Furthermore, the findings suggest that the kinetic development prior to (and during) push-off is more important than the kinematic end state at take-off.  相似文献   

7.
Plyometric jumping is a commonly prescribed method of training focused on the development of reactive strength and high-velocity concentric power. Literature suggests that aquatic plyometric training may be a low-impact, effective supplement to land-based training. The purpose of the present study was to quantify acute, biomechanical characteristics of the take-off and flight phase for plyometric movements performed in the water. Kinetic force platform data from 12 young, male adults were collected for counter-movement jumps performed on land and in water at two different immersion depths. The specificity of jumps between environmental conditions was assessed using kinetic measures, temporal characteristics, and an assessment of the statistical relationship between take-off velocity and time in the air. Greater peak mechanical power was observed for jumps performed in the water, and was influenced by immersion depth. Additionally, the data suggest that, in the water, the statistical relationship between take-off velocity and time in air is quadratic. Results highlight the potential application of aquatic plyometric training as a cross-training tool for improving mechanical power and suggest that water immersion depth and fluid drag play key roles in the specificity of the take-off phase for jumping movements performed in the water.  相似文献   

8.
We examined the effect of boundary conditions in imitation ski jumping on movement dynamics and coordination. We compared imitation ski jumps with – and without – the possibility to generate shear propulsion forces. Six elite ski jumpers performed imitation jumps by jumping from a fixed surface and from a rolling platform. The ground reaction force vector, kinematics of body segments, and EMG of eight lower limb muscles were recorded. Net joint dynamics were calculated using inverse dynamics. The two imitation jumps differed considerably from each other with regard to the dynamics (moments, forces), whereas the kinematics were very similar. Knee power was higher and hip power was lower on the rolling platform than on the fixed surface. Mean EMG levels were very similar for both conditions, but differences in the development of muscle activity were indicated for seven of eight muscles. These differences are reflected in a subtle difference of the alignment of ground reaction force with centre of mass: the ground reaction force runs continuously close to but behind the centre of mass on the rolling platform and fluctuates around it on the fixed surface. This likely reflects a different strategy for controlling angular momentum.  相似文献   

9.
目的:通过分析我国优秀男子跳台滑雪运动员实地起跳阶段运动学、起跳运动模式等指标,探究影响我国男子跳台滑雪运动员飞行距离的主要起跳因素。方法:1)选择8名我国男子跳台滑雪运动员作为研究对象,在日本长野县白马村K90跳台训练基地采集3次起跳阶段二维运动学数据,采用广义估计模型(GEE)分析影响飞行距离的实地起跳阶段运动学因素。2)截取平昌冬奥会排名前10的男子跳台滑雪选手决赛起跳阶段视频数据,采用单因素方差分析研究国内外运动员起跳阶段特定时刻肢体角度差异。3)实验室内使用1台Z camera高速摄像机和1块Kistler 9281EA测力台采集运动员静蹲跳(squat jump,SJ)、反向跳(countermovement jump,CMJ)、模拟跳跃(imitation jump,IJ)、下落跳(drop jump,DJ)的动力学及运动学数据,采用Pearson相关分析检验实验室内运动学及动力学指标与飞行距离间的相关性。结果:1)在实地起跳阶段运动学方面,起跳起始时刻躯干与助滑道夹角、小腿与助滑道夹角、髋关节角、膝关节角,以及起跳阶段的髋关节峰值角速度、膝关节平均角速度、起跳结束时刻膝关节角及髋关节角为飞行距离的影响因素(P<0.05)。2)在起跳阶段运动模式及力量特点方面,IJ重心最低处膝外翻指数(r=0.731)、DJ膝外翻最小值(r=0.713)、CMJ起跳阶段地面反作用力峰值(r=0.710)、CMJ蹬伸冲量(r=0.752)、SJ(r=0.723)及CMJ起跳峰值功率(r=0.762)均与飞行距离呈正相关。3)对比国内外运动员起跳阶段特定时刻肢体角度发现,国外优秀运动员起跳起始时刻小腿与助滑道夹角(53.54°±3.14°)显著小于我国运动员(57.62°±4.62°),出台瞬间小腿与助滑道夹角(58.22°±2.13°)显著小于我国运动员(65.59°±3.84°),大腿与助滑道夹角(73.28°±6.15°)显著大于我国运动员(58.77°±3.16°),起跳阶段结束时刻髋关节角度(175.23°±1.96°)显著大于我国运动员(156.37°±13.13°)。结论:我国跳台滑雪运动员起跳阶段起跳起始时刻应尽量降低身体重心以减少阻力,并适当提高膝关节角来提高出台后肢体伸展程度。起跳过程中提高膝关节蹬伸力量,同时适当降低髋关节伸展速度,避免风阻对躯干造成不利影响。室内及实地训练过程中,应在提升蹬伸爆发力的同时避免膝关节过度外翻,提高蹬伸力量及传递效率。  相似文献   

10.
The energy contribution of the lower extremity joints to vertical jumping and long jumping from a standing position has previously been investigated. However, the resultant joint moment contributions to vertical and long jumps performed with a running approach are unknown. metatarsophalangeal joint to these activities has not been investigated. The objective of this study was to determine the mechanical energy contributions of the hip, knee, ankle and metatarsophalangeal joints to running long jumps and running vertical jumps. A sagittal plane analysis was performed on five male university basketball players while performing running vertical jumps and four male long jumpers while performing running long jumps. The resultant joint moment and power patterns at the ankle, knee and hip were similar to those reported in the literature for standing jumps. It appears that the movement pattern of the jumps is not influenced by an increase in horizontal velocity before take-off. The metatarsophalangeal joint was a large energy absorber and generated only a minimal amount of energy at take-off. The ankle joint was the largest energy generator and absorber for both jumps; however, it played a smaller relative role during long jumping as the energy contribution of the hip increased.  相似文献   

11.
Ski jumping flight posture was analyzed for achieving large flight distance on the basis of high-speed video images of the initial 40 m part of 120-m ski jumping flight. The time variations of the forward leaning angle and the ski angle of attack were measured from the video images, and the aerodynamic forces were calculated from the kinematic data derived from the images. Some correlations were investigated between the initial-speed corrected flight distance and such parameters as the angles of jumper, the initial transition time and the aerodynamic force coefficients. The result indicated that small body angle of attack was a key for large flight distance in the initial phase of flight because of small drag force, and that the most distinctive fault of beginners was too large body angle of attack and ski angle of attack leading to aerodynamic stall. Too small drag force does not give an optimal condition for large flight distance because the lift force is also too small. The ratio of the lift to the drag was larger than 0.95 for advanced jumpers.  相似文献   

12.
This study examined the effects of the rider on the linear projectile kinematics of show-jumping horses. SVHS video recordings (50 Hz) of eight horses jumping a vertical fence 1 m high were used for the study. Horses jumped the fence under two conditions: loose (no rider or tack) and ridden. Recordings were digitised using Peak Motus. After digitising the sequences, each rider's digitised data were removed from the ridden horse data so that three conditions were examined: loose, ridden (including the rider's data) and riderless (rider's data removed). Repeated measures ANOVA revealed significant differences between ridden and loose conditions for CG height at take-off (p < 0.001), CG distance to the fence at take-off (p = 0.001), maximum CG during the suspension phase (p < 0.001), CG position over the centre of the fence (p < 0.001), CG height at landing (p < 0.001), and vertical velocity at take-off (p < 0.001). The results indicated that the rider's effect on jumping horses was primarily due to behavioural changes in the horses motion (resulting from the rider's instruction), rather than inertial effects (due to the positioning of the rider on the horse). These findings have implications for the coaching of riders and horses.  相似文献   

13.
为了探讨短距离助跑跳远这一练习方法的运动生物力学意义，本文对跳远运动员的短距离助跑和全程助跑跳远进行高速摄影和三维测力的同步测试．并通过对其分析和研究，结果表明：１）短距离助跑与全程助跑的水平速度、跳跃距离之差约为１０％；２）起跳时间和力作用于垂直方向的时间比全程助跑长；３）腾起角度大于全程助跑；４）身体重心腾起高度和滞空时间与全程助跑相同。  相似文献   

14.
Sagittal plane SVHS video recordings (50 Hz) were made of horses jumping the wall at an international Puissance competition. Video sequences were manually digitized and six kinematic variables at take-off were analyzed. Nine horses started the competition with the fence height at 1.80 m, and two horses attempted the fence in the fifth and final round with the fence height at 2.27 m. For successful performances, fence height was correlated with the following take-off variables: vertical velocity of the centre of mass (r = 0.45, p = 0.03); height of centre of mass (r = 0.44, p = 0.04); distance of centre of mass from fence (r = 0.46, p = 0.03); and distance from leading hind limb to centre of mass (r = -0.61, p < 0.01). These results indicated that body position at take-off is the most important aspect when jumping high fences. This is the first known study that has examined horses jumping over a Puissance wall. The results should help horse riders and trainers improve performance in Puissance jumping horses, and perhaps help in the early selection of horses with a talent for jumping high fences.  相似文献   

15.
In this study, we found that the optimum take-off angle for a long jumper may be predicted by combining the equation for the range of a projectile in free flight with the measured relations between take-off speed, take-off height and take-off angle for the athlete. The prediction method was evaluated using video measurements of three experienced male long jumpers who performed maximum-effort jumps over a wide range of take-off angles. To produce low take-off angles the athletes used a long and fast run-up, whereas higher take-off angles were produced using a progressively shorter and slower run-up. For all three athletes, the take-off speed decreased and the take-off height increased as the athlete jumped with a higher take-off angle. The calculated optimum take-off angles were in good agreement with the athletes' competition take-off angles.  相似文献   

16.
In this study, we found that the optimum take-off angle for a long jumper may be predicted by combining the equation for the range of a projectile in free flight with the measured relations between take-off speed, take-off height and take-off angle for the athlete. The prediction method was evaluated using video measurements of three experienced male long jumpers who performed maximum-effort jumps over a wide range of take-off angles. To produce low take-off angles the athletes used a long and fast run-up, whereas higher take-off angles were produced using a progressively shorter and slower run-up. For all three athletes, the take-off speed decreased and the take-off height increased as the athlete jumped with a higher take-off angle. The calculated optimum take-off angles were in good agreement with the athletes' competition take-off angles.  相似文献   

17.
The special wind compensation system recently adopted by Fédération Internationale de Ski (FIS; International Ski Federation) to consider the effects of changing wind conditions has caused some controversy. Here, the effect of wind on jumping distance in ski jumping was studied by means of computer simulation and compared with the wind compensation factors used by FIS during the World Cup season 2009/2010. The results showed clearly that the effect of increasing head/tail wind on jumping distance is not linear: +17.4 m/ ? 29.1 m, respectively, for a wind speed of 3 m/s. The linear formula used in the trial period of the wind compensation system was found to be appropriate only for a limited range of jumping distances as the gradient of the landing slope slows down the rate of distance change in long jumps.  相似文献   

18.
Progress in micro-electromechanical systems has turned inertial sensor units (IUs) into a suitable tool for vertical jumping evaluation. In total, 9 men and 8 women were recruited for this study. Three types of vertical jumping tests were evaluated in order to determine if the data provided by an IU placed at the lumbar spine could reliably assess jumping biomechanics and to examine the validity of the IU compared with force plate platform recordings. Robust correlation levels of the IU-based jumping biomechanical evaluation with respect to the force plate across the entire analysed jumping battery were found. In this sense, significant and extremely large correlations were found when raw data of both IU and force plate-derived normalised force–time curves were compared. Furthermore, significant and mainly moderate correlation levels were also found between both instruments when isolated resultant forces’ peak values of predefined jumping phases of each manoeuvre were analysed. However, Bland and Altman graphical representation demonstrated a systematic error in the distribution of the data points within the mean ±1.96 SD intervals. Using IUs, several biomechanical variables such as the resultant force–time curve patterns of the three different vertical jumps analysed were reliably measured.  相似文献   

19.
ABSTRACT

Previous research suggests that landing mechanics may be affected by the mechanics of the preceding jump take-off. The purpose of the present study was to investigate whether jump take-off mechanics influence the subsequent landing mechanics. Female volleyball (n = 17) and ice hockey (n = 19) players performed maximal vertical jumps with forefoot and heel take-off strategies. During forefoot and heel jumps, participants were instructed to shift their weight to their forefoot or heel, respectively, and push through this portion of the foot throughout the jump. Jump mechanics were examined using 3D motion analysis, where lower extremity net joint moment (NJM) work, NJM, and segment angles were compared between forefoot and heel jumps using multivariate ANOVA. During jump take-off, participants performed more positive ankle plantar flexor and knee extensor NJM work in forefoot compared to heel jumps (P < 0.05). From initial foot contact to foot flat, participants performed more negative ankle plantar flexor and hip extensor NJM work during heel compared to forefoot jumps (P < 0.05). The present results demonstrate that using a heel take-off strategy results in a different distribution of lower extremity NJM work and NJM during landing compared to landings following forefoot jumps.  相似文献   

20.
The aim of this study was to establish the effectiveness of a resistance training programme, designed to improve vertical jumping ability, on the grab, swing and rear-weighted track starts in swimming. Twenty-three female non-competitive swimmers participated (age 19.9 +/- 2.4 years; mean +/- s). The diving techniques were practised weekly for 8 weeks. The participants were randomly assigned to a control group (n = 11) or a resistance-training group (n = 12), which trained three times a week for 9 weeks. The tests before and after the training programme involved performing each dive technique and six dry-land tests: two countermovement jumps (with and without arms), two isokinetic squats (bar speeds of 0.44 and 0.70 rad x s(-1)) and two overhead throws (with andwithout back extension). A repeated-measures multivariate analysis of variance was used to show that resistance training improved performance in the dry-land tests (P < 0.0001). No significant improvements due to training were found for any temporal, kinematic or kinetic variables within the grab or swing starts. Significant improvements (P < 0.05) were found for the track start for take-off velocity, take-off angle and horizontal impulse. The results suggest that the improved skill of vertical jumping was not transferred directly to the start, particularly in the grab technique. Non-significant trends towards improvement were observed within all starts for vertical force components, suggesting the need to practise the dives to retrain the changed neuromuscular properties.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号