首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 515 毫秒
1.
The purpose of this study was to investigate the effect of lumbosacral kinetics on sprinting. Twelve male sprinters performed 50 m sprints at maximal effort. Kinematic and ground reaction force data were recorded at approximately 40 m from sprint commencement. A whole-body inverse dynamics approach was applied to calculate joint forces and torques at the hip and lumbosacral joints. The contribution of the hips and lumbosacral joint torques to pelvic rotation was subsequently calculated, with joint force powers indicating the rate of mechanical energy transfer between segments across joint centres calculated for both hip joints. The kinetic analysis indicated that the lumbosacral torsional torque contributed significantly to pelvic rotation. Additionally, the pelvic rotation exerted anterior–posterior joint forces on the hips, contributing to the large positive joint force power at the hip of the stance leg. These hip joint force powers assisted in motion recovery during sprinting. In conclusion, the lumbosacral torsional torque might contribute to the recovery motion in sprinting through application of the anterior–posterior joint forces at the hip joints via pelvic rotation.  相似文献   

2.
Ankle taping is commonly used to prevent ankle sprains. However, kinematic assessments investigating the biomechanical effects of ankle taping have provided inconclusive results. This study aimed to determine the effect of ankle taping on the external ankle joint moments during a drop landing on a tilted surface at 25°. Twenty-five participants performed landings on a tilted force platform that caused ankle inversion with and without ankle taping. Landing kinematics were captured using a motion capture system. External ankle inversion moment, the angular impulse due to the medio-lateral and vertical components of ground reaction force (GRF) and their moment arm lengths about the ankle joint were analysed. The foot plantar inclination relative to the ground was assessed. In the taping condition, the foot plantar inclination and ankle inversion angular impulse were reduced significantly compared to that of the control. The only component of the external inversion moment to change significantly in the taped condition was a shortened medio-lateral GRF moment arm length. It can be assumed that the ankle taping altered the foot plantar inclination relative to the ground, thereby shortening the moment arm of medio-lateral GRF that resulted in the reduced ankle inversion angular impulse.  相似文献   

3.
目的:确定跑步疲劳进程中下肢生物力学模式的变化,包括垂直和前后地面反作用力(ground reaction force,GRF)、垂直地面反作用力(vertical ground reaction force,vGRF)负载率、关节力学和刚度。方法:14名男性受试,采用Vicon红外摄像头和Bertec三维测力跑台,每隔2 min采集受试疲劳干预中的15 s GRF数据以及标记点轨迹。受试需穿着统一的跑鞋在测力跑台以恒速3.33 m/s跑至疲劳。满足以下标准时,干预结束:1)最大心率大于当下年龄的90%;2)受试不能继续跑步。对比受试跑至疲劳进程中4个时刻(疲劳前、33%、67%和100%)的着地冲击和下肢三关节触地角度、最大角度、关节活动度、角度变化量、关节蹬伸力矩和刚度等特征,采集并分析受试安静状态、疲劳后即刻、疲劳后4 min、疲劳后9 min的血乳酸浓度。结果:与疲劳前相比,1)血乳酸浓度在疲劳后即刻、疲劳后4 min和疲劳后9 min均显著增加;2)垂直/前后矢状轴GRF和vGRF负载率等参数在疲劳干预过程中均未观察到显著性变化;3)髋关节活动度在疲劳过程的33%、67%和100%时刻显著增加,膝关节活动度在67%时刻显著增加;4)踝关节运动学及踝、膝和髋关节的蹬伸力矩峰值均无变化;5)垂直刚度在67%和100%时刻显著降低。结论:疲劳干预过程中,GRF特征参数均没有明显变化,但是观察到下肢运动学和动力学模式的非线性改变。特别是从疲劳干预中期开始,人体下肢通过增加髋、膝关节活动度并减小垂直刚度实现“软着陆”策略,维持相似的冲击力特征,以减小长时间跑步可能带来损伤的风险。  相似文献   

4.
This study analyzed the joint torque and the mechanical energy flow in the support legs of skilled male race walkers. Twelve race walkers were videotaped using a high-speed camera at a frame rate of 250 Hz set perpendicular to the sagittal plane of motion; their ground reaction forces were measured with two force platforms. A two-dimensional, 14-segment, linked model was used to calculate the kinetics of the support leg joints. In the initial part of the support phase, the mechanical energy flowed into the thigh and shank by the torque of the large hip extensors and knee flexors. In the middle part, the mechanical energy generated by the torque of the large plantar flexors flowed to the foot and from the foot to the shank by the ankle joint force. The mechanical energy flow by the forward joint force of the support hip was significantly related to the walking speed in the final part of the support phase. Our findings suggest that race walkers in the final part of the support phase should exert the torque of the knee extensors and hip flexors to transfer the mechanical energy more effectively to the support thigh and shank.  相似文献   

5.
目的:确定运动员在落地后即刻启动完成侧切变向(LSC)动作的下肢踝、膝和髋三关节矢状面的运动学和动力学特点,并与平地跑动侧切变向(SC)对比分析、探讨这些差异对下肢关节造成的影响。方法:以14名高水平足球运动员为背景的大学生完成落地侧切和平跑侧切动作时的下肢运动学和动力学数据进行采集与分析。结果:LSC动作的踝、膝关节ROM和关节角速度显著增加,髋关节ROM则呈相反趋势(P<0.05或P<0.01);LSC的踝、膝和髋关节力矩峰值,踝、髋关节功率峰值呈现显著大于SC(P<0.01),膝关节功率峰值小于SC(P<0.05);LSC在水平向后、垂直向上地反峰值及峰值加载率有明显的增加(P<0.01),水平向右地反无明显差异(P>0.05)。结论:LSC虽然略降低了膝关节功率峰值,但其余所有运动学、动力学及GRF都预示其下肢关节所承受的损伤风险更高,尤其是踝关节和膝关节。踝关节的高功率和跖屈肌的持续紧张、伸膝力矩和三维地反的显著升高,使得该动作比公认高损伤风险的平跑侧切损伤风险几率更大。  相似文献   

6.
The aims of this study were to evaluate the accuracy of centre of pressure (COP) data obtained during transition of load across the boundary between two force plates, and secondly to examine the effect of such COP data on joint kinetics during sprint running performances. COP data were collected from two piezoelectric force plates as a trolley wheel was rolled across the boundary between the plates. Position data for the trolley were collected using an opto-electronic motion analysis system for comparison with COP data. Mean COP errors during transition across the plate boundary were 0.003 ± 0.002 m relative to a control point. Kinematic and kinetic data were also collected from eight athletes during sprint running trials to demonstrate the sensitivity of the inverse dynamics analysis to COP error for the ground contact phase of the dynamic movement trials. Kinetic sensitivity to the COP error was assessed during the entire stance phase for the ankle, knee, and hip joints and was less than 5% and 3% for joint moment and power data, respectively. Based on the small COP error during transition across plate boundaries, it is recommended that foot contacts overlapping two force plates may be included in inverse dynamics analyses.  相似文献   

7.
The purpose of this study was to investigate effects of the ground reaction forces on the rotation of the body as a whole and on the joint torques of the lower limbs associated with trunk and pelvic rotation in baseball tee batting. A total of 22 male collegiate baseball players participated in this study. Three-dimensional coordinate data were acquired by a motion capture system (250 Hz), and ground reaction forces of both legs were measured with three force platforms (1,000 Hz). Kinetic data were used to calculate the moment about the vertical axis through the body’s centre of mass resulting from ground reaction forces, as well as to calculate the torque and mechanical work in the lower limb joints. The lateral/medial ground reaction force generated by both legs resulted in the large whole body moment about its vertical axis. The joint torques of flexion/extension of both hips, adduction of the stride hip and extension of the stride knee produced significantly larger mechanical work than did the other joint torques. To obtain high bat-head speed, the batter should push both legs in the lateral/medial direction by utilising both hips and stride knee torques so as to increase the whole body rotation.  相似文献   

8.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

9.
We investigated joint coordination differences between Taekwondo back kicks and jumping back kicks, and how jumping (in performing the latter) would alter engaging ground reaction forces (GRF) in executing kicking. Ten skilful athletes volunteered to perform both kinds of kicking within the shortest time for three successful trials. Three high-speed cameras and two force platforms were used for data collection, and the trial with the shortest execution time was selected for analysis. Movements were divided into the rotation and attack phases. With comparable execution time and maximum joint linear/angular speeds, back kicks and jumping back kicks differ mainly in larger GRF in the latter, and in greater target acceleration in the former probably because the support leg prevented athletes’ rebounding after impact. In addition, more prominent antiphase and in-phase coordination between the shoulder segment and knee joint, and elongated rotation phase were found in jumping back kicks. Larger GRF values in jumping back kicks were generated for jump take-off rather than for a more powerful attack. In back kicks although the support leg remained ground contact, greatly decreased GRF in the attack phase suggested that the support leg mainly served as a rotation axis.  相似文献   

10.
The purpose of the study was to quantify the muscle torques required in the performance of an optimised Yurchenko layout vault based on a five-segment rigid link model and using input data from an elite female gymnast. At impact, the wrist torque trajectory indicated an extension-flexion action while the shoulder was characterised by extension. The approximate 100 Nm (wrist flexor) and 125 Nm (shoulder extensor) respective peak torque magnitudes indicated that the impact action is not passive in nature. The contribution of joint torques to the adjoining segments was apportioned to the relative components namely; centripetal, gravity and net joint torque components. Despite the presence of both large wrist and shoulder joint torques, the net turning effect on the upper limb and hand segments about their centre of mass (CM) was small. The principal role of the upper limb joint torques was therefore to effect the appropriate joint motions and to support the weight of the gymnast. The performance of the optimum vault was primarily the result of the interplay between the centripetal and the net joint torque components at the wrist, hip and shoulder joints. This has implications to the performer in that successful execution of the vault is principally concerned with the ability to create a high angular momentum for horse impact and to then apply an appropriate level of joint torques that will make optimal use of the initial kinetic condition.  相似文献   

11.
Propulsion and bracing ground reaction force (GRF) in overhand throwing are integral in propagating joint reaction kinetics and ball velocity, yet how stride length effects drive (hind) and stride (lead) leg GRF profiles remain unknown. Using a randomised crossover design, 19 pitchers (15 collegiate and 4 high school) were assigned to throw 2 simulated 80-pitch games at ±25% of their desired stride length. An integrated motion capture system with two force plates and radar gun tracked each throw. Vertical and anterior–posterior GRF was normalised then impulse was derived. Paired t-tests identified whether differences between conditions were significant. Late in single leg support, peak propulsion GRF was statistically greater for the drive leg with increased stride. Stride leg peak vertical GRF in braking occurred before acceleration with longer strides, but near ball release with shorter strides. Greater posterior shear GRF involving both legs demonstrated increased braking with longer strides. Conversely, decreased drive leg propulsion reduced both legs’ braking effects with shorter strides. Results suggest an interconnection between normalised stride length and GRF application in propulsion and bracing. This work has shown stride length to be an important kinematic factor affecting the magnitude and timing of external forces acting upon the body.  相似文献   

12.
Chronic elbow injuries from tumbling in female gymnastics present a serious problem for performers. This research examined how the biomechanical characteristics of impact loading and elbow kinematics and kinetics change as a function of technique selection. Seven international-level female gymnasts performed 10 trials of the round-off from a hurdle step to flic-flac with ‘parallel’ and ‘T-shape’ hand positions. Synchronized kinematic (3D-automated motion analysis system; 247 Hz) and kinetic (two force plates; 1,235 Hz) data were collected for each trial. Wilcoxon non-parametric test and effect-size statistics determined differences between the hand positions examined in this study. Significant differences (p < 0.05) and large effect sizes (ES>0.8) were observed for peak vertical ground reaction force (GRF), anterior–posterior GRF, resultant GRF, loading rates of these forces and elbow joint angles, and internal moments of force in sagittal, transverse, and frontal planes. In conclusion, the T-shape hand position reduces vertical, anterior–posterior, and resultant contact forces and has a decreased loading rate indicating a safer technique for the round-off. Significant differences observed in joint elbow moments highlighted that the T-shape position may prevent overloading of the joint complex and consequently reduce the potential for elbow injury.  相似文献   

13.
Measurement of ground reaction force (GRF) in running provides a direct indication of the loads to which the body is subjected at each foot-ground contact, and can provide an objective explanation for performance outcomes. Traditionally, the collection of three orthogonal component GRF data in running requires an athlete to complete a series of return loops along a laboratory based runway, within which a force platform is embedded, in order to collect data from a discrete footfall. The major disadvantages associated with this GRF data collection methodology include the inability to assess multiple consecutive foot contacts and the fact that measurements are typically confined to the laboratory. The objective of this research was to investigate the potential for wearable instrumentation to be employed, in conjunction with artificial neural network (ANN) and multiple linear regression (MLR) models, for the estimation of GRF in middle distance running. A modular wearable data acquisition system was developed to acquire in-shoe force (ISF) data. Matched data sets from wearable instrumentation (source data) and force plate (target data) records were collected from elite middle-distance runners under controlled laboratory conditions for the purposes of ANN and MLR model development (MD) and model validation (MV). In terms of statistical measures of prediction accuracy the MLR model was found to provide a superior level of accuracy for the prediction of the vertical and medio-lateral components of GRF and alternatively, the ANN model provided the most accurate predictions of the anterior-posterior component of GRF. The prediction accuracy of each component of GRF was found to be governed by the inherent signal variability, in which case the vertical and anterior-posterior components were more reliable and subsequently predicted significantly more accurately than the medio-lateral component. The emerging capability for obtaining continuous GRF records from wearable instrumentation has the potential to permit unprecedented quantification of training stress and competition demands in running.  相似文献   

14.
To determine the contributions of the motions of the body segments to the vertical ground reaction force (Fz), the joint torques produced by the leg muscles, and the time course of vertical velocity generation during a vertical jump, 15 men were videotaped performing countermovement vertical jumps from a force plate with and without an arm swing. Linear kinematic, Fz, and joint torque data were computed and compared using repeated measures analysis of variance. Maximum jump height was significantly larger in the arm swing jumps compared to the no arm swing jumps and was due to both a higher height of the center of mass (CM) at takeoff (54%) and a larger vertical velocity of the CM at takeoff (46%). The net vertical impulse created during the propulsive phase of the arm swing jumps was greater due to a trend of an increased duration (0.021 s) of the propulsive phase and not to larger average values of Fz. In the arm swing jumps, the arm motion resulted in the arms making a larger maximal contribution to Fz during the middle of the propulsive phase and decreased the negative contribution of the trunk-head and thigh to Fz late in the propulsive phase. Last, the arm swing decreased the extensor torques at the hip (13%), knee (10%), and ankle (10%) early in the propulsive phase but augmented these same extensor torques later in the propulsive phase.  相似文献   

15.
This study aimed to clarify the differences between the horizontal single-leg rebound jump (HJ) and vertical single-leg rebound jump (VJ) in terms of three-dimensional joint kinetics for the take-off leg, while focusing on frontal and transverse plane movements. Eleven male track and field athletes performed HJ and VJ. Kinematic and kinetic data were calculated using data recorded with a motion capture system and force platforms. The hip abduction torque, trunk lateral flexion torque (flexion for the swing-leg side), hip external and internal torque, trunk rotational torque, and the powers associated with these torques were larger when performing HJ because of resistance to the impact ground reaction force and because of pelvic and posture control. Pelvic rotation was noted in HJ, and this was controlled not only by the hip and trunk joint torque from the transverse plane but also by the hip abduction torque. Therefore, hip and trunk joint kinetics in the frontal and transverse plane play an important role in a single-leg jump, regardless of the jumping direction, and may also play a more important role in HJ than in VJ.  相似文献   

16.
ABSTRACT

This study examined the effects of shoe collar-height and counter-stiffness on ground reaction force (GRF), ankle and knee mechanics in landing. Eighteen university basketball players performed drop landing when wearing shoes in different collar height (high vs. low) and counter-stiffness (stiffer vs. less stiff). Biomechanical variables were measured with force platform and motion capturing systems. Two-way repeated measures ANOVA was performed with α = 0.05. Wearing high collar shoes exhibited smaller peak ankle dorsiflexion and total sagittal RoM, peak knee extension moment, but larger peak knee varus moment than the low collar shoes. Stiffer counter-stiffness shoes related to smaller ankle inversion at touchdown and total coronal RoM, but larger peak knee flexion and increased total ankle and knee sagittal RoM than the less stiff counter-stiffness. Furthermore, wearing stiffer counter-stiffness shoes increased forefoot GRF peak at high collar condition, while no significant differences between counter-stiffness at low collar condition. These results suggest that although higher collar height and/or stiffness heel counter used can reduce ankle motion in coronal plane, it would increase the motion and loading at knee joint, which is susceptible to knee injuries. These findings could be insightful for training and footwear development in basketball.  相似文献   

17.
The purpose of this study was to examine changes in landing performance during fatigue that could result in increased stress fracture injury risk. Five participants performed nonfatigued and fatigued drop landings (0.60 m), while ground reaction force (GRF), electromyographic (EMG) activity, and kinematics were recorded. Fatigue was defined as a 5-20% reduction in vertical jumping performance. Single-subject analyses revealed that all participants were affected (p < or = .05) by fatigue. Post hoc comparisons revealed a group effect (p < or = .05) for selected variables. Participants landed with (a) less joint flexion at contact and used a greater range of motion, (b) greater GRF peaks and loading rates, and (c) less EMG activity. These changes were consistent with greater risk of stress fracture.  相似文献   

18.
The purpose of this study was to measure the contributions of the motions of body segments and joints to racquet head speed during the tennis serve. Nine experienced male players were studied using three-dimensional film analysis. Upper arm twist orientations were calculated with two alternative methods using joint centres and skin-attached markers. The results showed that skin-attached markers could not be used to calculate accurate upper arm twist orientations due to skin movement, and that the use of joint centres produced errors of more than 20 degrees in the upper arm twist orientation when the computed elbow flexion/extension angle exceeded 135 degrees in the final 0.03 s before impact. When there were large errors in the upper arm twist orientation, it was impossible to obtain accurate data for shoulder or elbow joint rotations about any axis. Considering only the contributors that could be measured within our standards of acceptable error, the approximate sequential order of main contributors to racquet speed between maximum knee flexion and impact was: shoulder external rotation, wrist extension, twist rotation of the lower trunk, twist rotation of the upper trunk relative to the lower trunk, shoulder abduction, elbow extension, ulnar deviation rotation, a second twist rotation of the upper trunk relative to the lower trunk, and wrist flexion. The elbow extension and wrist flexion contributions were especially large. Forearm pronation made a brief negative contribution. Computed contributions of shoulder internal rotation, elbow extension and forearm pronation within the final 0.03 s before impact were questionable due to the large degree of elbow extension. Near impact, the combined contribution of shoulder flexion/extension and abduction/adduction rotations to racquet speed was negligible.  相似文献   

19.
The purpose of this study was to determine hip joint kinetics during a table tennis topspin forehand, and to investigate the relationship between the relevant kinematic and kinetic variables and the racket horizontal and vertical velocities at ball impact. Eighteen male advanced table tennis players hit cross-court topspin forehands against backspin balls. The hip joint torque and force components around the pelvis coordinate system were determined using inverse dynamics. Furthermore, the work done on the pelvis by these components was also determined. The peak pelvis axial rotation velocity and the work done by the playing side hip pelvis axial rotation torque were positively related to the racket horizontal velocity at impact. The sum of the work done on the pelvis by the backward tilt torques and the upward joint forces was positively related to the racket vertical velocity at impact. The results suggest that the playing side hip pelvis axial rotation torque exertion is important for acquiring a high racket horizontal velocity at impact. The pelvis backward tilt torques and upward joint forces at both hip joints collectively contribute to the generation of the racket vertical velocity, and the mechanism for acquiring the vertical velocity may vary among players.  相似文献   

20.
聚焦跑步时髌股关节生物力学特征,探究穿着不同极简指数(MI)跑鞋对髌股关节接触力、应力等的即刻影响。选取15名习惯后跟着地的健康男性跑者,分别穿着两种MI跑鞋(MI 86%极简跑鞋和MI 26%缓冲跑鞋),使用Vicon红外运动捕捉系统、Kistler三维测力台同步采集3.33 m/s(速度变化范围±5%)跑速下的膝、踝关节运动学和地面反作用力,通过逆向动力学等计算股四头肌肌力、髌股关节接触力、髌股关节接触面积以及髌股关节接触应力。结果显示:两种跑鞋条件下的冲击力峰值和蹬地力峰值均无明显差异。与缓冲跑鞋相比,穿着极简跑鞋跑步时,膝关节最大屈曲角度显著降低(P<0.01);髌股关节接触面积显著减小(P<0.01);膝关节伸肌峰值力矩显著下降(P<0.01);髌股关节接触力和应力峰值均显著减小(P<0.05)。研究表明,相比缓冲跑鞋,穿着极简跑鞋在未影响触地后冲击力峰值的同时,通过降低伸膝力矩大幅度减少髌股关节接触力(下降17.02%)、降低髌股关节接触应力,从而有效改善支撑期髌股关节负荷,为进一步减小髌股关节疼痛综合征风险提供可能。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号