首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 35 毫秒
1.
Diagonal skiing as a major classical technique has hardly been investigated over the last two decades, although technique and racing velocities have developed substantially. The aims of the present study were to 1) analyse pole and leg kinetics and kinematics during submaximal uphill diagonal roller skiing and 2) identify biomechanical factors related to performance. Twelve elite skiers performed a time to exhaustion (performance) test on a treadmill. Joint kinematics and pole/plantar forces were recorded separately during diagonal roller skiing (9°; 11 km/h). Performance was correlated to cycle length (r = 0.77; P < 0.05), relative leg swing (r = 0.71), and gliding time (r = 0.74), hip flexion range of motion (ROM) during swing (r = 0.73) and knee extension ROM during gliding (r = 0.71). Push-off demonstrated performance correlations for impulse of leg force (r = 0.84), relative duration (r = ? 0.76) and knee flexion (r = 0.73) and extension ROM (r = 0.74). Relative time to peak pole force was associated with performance (r = 0.73). In summary, diagonal roller skiing performance was linked to 1) longer cycle length, 2) greater impulse of force during a shorter push-off with larger flexion/extension ROMs in leg joints, 3) longer leg swing, and 4) later peak pole force, demonstrating the major key characteristics to be emphasised in training.  相似文献   

2.
The purpose of this study was to determine whether joint velocities and segmental angular velocities are significantly correlated with ball velocity during an instep soccer kick. We developed a deterministic model that related ball velocity to kicking leg and pelvis motion from the initiation of downswing until impact. Three-dimensional videography was used to collect data from 16 experienced male soccer players (age = 24.8 ± 5.5 years; height = 1.80 ± 0.07 m; mass = 76.73 ± 8.31 kg) while kicking a stationary soccer ball into a goal 12 m away with their right foot with maximal effort. We found that impact velocities of the foot center of mass (CM), the impact velocity of the foot CM relative to the knee, peak velocity of the knee relative to the hip, and the peak angular thigh velocity were significantly correlated with ball velocity. These data suggest that linear and angular velocities at and prior to impact are critical to developing high ball velocity. Since events prior to impact are critical for kick success, coordination and summation of speeds throughout the kicking motion are important factors. Segmental coordination that occurs during a maximal effort kick is critical for completing a successful kick.  相似文献   

3.
Abstract

The aims of the study were to: (1) adapt the “double-push” technique from inline skating to cross-country skiing; (2) compare this new skiing technique with the conventional skate skiing cross-country technique; and (3) test the hypothesis that the double-push technique improves skiing speed in a short sprint. 13 elite skiers performed maximum-speed sprints over 100 m using the double-push skate skiing technique and using the conventional “V2” skate skiing technique. Pole and plantar forces, knee angle, cycle characteristics, and electromyography of nine lower body muscles were analysed. We found that the double-push technique could be successfully transferred to cross-country skiing, and that this new technique is faster than the conventional skate skiing technique. The double-push technique was 2.9 ± 2.2% faster (P < 0.001), which corresponds to a time advantage of 0.41 ± 0.31 s over 100 m. The double-push technique had a longer cycle length and a lower cycle rate, and it was characterized by higher muscle activity, higher knee extension amplitudes and velocities, and higher peak foot forces, especially in the first phase of the push-off. Also, the foot was more loaded laterally in the double-push technique than in the conventional skate skiing technique.  相似文献   

4.
In this study, changes in skiing performance and poling kinetics during a simulated cross-country sprint skiing competition were investigated. Twelve elite male cross-country skiers performed simulated sprint competition (4 × 1,150 m heat with 20 min recovery between the heats) using the double-poling technique. Vertical and horizontal pole forces and cycle characteristics were measured using a force plate system (20-m long) during the starting spurt, racing speed, and finishing spurt of each heat. Moreover, heat and 20-m phase velocities were determined. Vertical and horizontal pole impulses as well as mean cycle length were calculated. The velocities of heats decreased by 2.7 ± 1.7% (p = 0.003) over the simulated competition. The 20-m spurting velocity decreased by 16 ± 5% (p < 0.002) and poling time increased by 18 ± 9% (p < 0.003) in spurt phases within heats. Vertical and horizontal poling impulses did not change significantly during the simulation; however, the mean forces decreased (p < 0.039) (vertical by 24 ± 11% and horizontal by 20 ± 10%) within heats but not between the heats. Decreased heat velocities over the simulated sprint and spurting velocities within heats indicated fatigue among the skiers. Fatigue was also manifested by decreased pole force production and increased poling time.  相似文献   

5.
This investigation assessed whether a Technique Refinement Intervention designed to produce pronounced vertical hip displacement during the kicking stride could improve maximal instep kick performance. Nine skilled players (age 23.7 ± 3.8 years, height 1.82 ± 0.06 m, body mass 78.5 ± 6.1 kg, experience 14.7 ± 3.8 years; mean ± SD) performed 10 kicking trials prior to (NORM) and following the intervention (INT). Ground reaction force (1000 Hz) and three-dimensional motion analysis (250 Hz) data were used to calculate lower limb kinetic and kinematic variables. Paired t-tests and statistical parametric mapping examined differences between the two kicking techniques across the entire kicking motion. Peak ball velocities (26.3 ± 2.1 m · s?1 vs 25.1 ± 1.5 m · s?1) and vertical displacements of the kicking leg hip joint centre (0.041 ± 0.012 m vs 0.028 ± 0.011 m) were significantly larger (P < 0.025) when performed following INT. Further, various significant changes in support and kicking leg dynamics contributed to a significantly faster kicking knee extension angular velocity through ball contact following INT (70–100% of total kicking motion, P < 0.003). Maximal instep kick performance was enhanced following INT, and the mechanisms presented are indicative of greater passive power flow to the kicking limb during the kicking stride.  相似文献   

6.
Abstract

The aim of this study was to assess fatigue during a simulated cross-country skiing sprint competition based on skating technique. Sixteen male skiers performed a 30-m maximal skiing speed test and four 850-m heats with roller skies on a tartan track, separated by 20 min recovery between heats. Physiological variables (heart rate, blood lactate concentration, oxygen consumption), skiing velocity, and electromyography (EMG) were recorded at the beginning of the heats and at the end of each 200-m lap during the heats. Maximal skiing velocity and EMG were measured in the speed test before the simulation. No differences were observed in skiing velocity, EMG or metabolic variables between the heats. The end (820–850 m) velocities and sum-iEMG of the triceps brachii and vastus lateralis in the four heats were significantly lower than the skiing velocity and sum-iEMG in the speed test. A significant correlation was observed between mean oxygen consumption and the change in skiing velocity over the four heats. Each single heat induced considerable neuromuscular fatigue, but recovery between the heats was long enough to prevent accumulation of fatigue. The results suggest that the skiers with a high aerobic power were less fatigued throughout the simulation.  相似文献   

7.
The purpose was to study the adaptation to speed in the temporal patterns of the movement cycle and determine any differences in velocity, cycle rate and cycle length at the maximum speed level in the different classical style and freestyle cross-country skiing techniques. Eight skilled male cross-country skiers were filmed with a digital video camera in the sagittal plane while skiing on a flat cross-country ski track. The skiers performed three classical style techniques the diagonal stride, kick double poling and the double poling technique and four freestyle techniques paddle dance (gear 2), double dance (gear 3), single dance (gear 4) and combiskate (gear 5) at four different self-selected speed levels slow, medium, fast and their maximum. Cycle duration, cycle rate, cycle length, and relative and absolute cycle phase duration of the different techniques at the different speed levels were analysed by means of a video analysis system. The cycle rate in all tested classical and freestyle techniques was found to increase significantly (p < .01) with speed from slow to maximum. Simultaneously, there was a significant decrease in the absolute phase durations of all the investigated skiing techniques. A minor, not significant, change in cycle length, and the significant increase in cycle rate with speed showed that the classical and freestyle cross-country skiing styles are dependent, to a large extent, on an increase in cycle rate for speed adaptation. A striking finding was the constant relative phase duration with speed, which indicates a simplified neural control of the speed adaptation in both cross-country skiing styles. For the practitioner, the knowledge about the importance of increasing cycle frequency rather than cycle length in the speed adaptation can be used to optimise a rapid increase in speed. The knowledge about the decrease in absolute phase duration, especially the thrust phase duration, points to the need for strength and technique training to enable force production at a high cycle rate and skiing speed. The knowledge that the relative phase duration stays constant with speed may be used to simplify the learning of the different cross-country skiing techniques.  相似文献   

8.
This study aimed to compare the power produced by the flutter-kick action at different swimming velocities. Eighteen high-level male swimmers completed a maximal 15-m flutter-kicking sprint and underwent two tests (one passive and one with maximal flutter-kicking) in which they were towed at six velocities ranging from 1.0 to 2.0 m/s. Power values were computed for each velocity, and selected kinematic indices were evaluated at 1.2 and 2.0 m/s. The highest power (54 ± 8 W) was observed at the velocity at which the drag equaled the propulsive force (1.27 ± 0.08 m/s), which was similar to that recorded in the flutter-kicking sprint (1.26 ± 0.09 m/s). Thereafter, power decreased significantly with increasing velocity, up to 17 ± 10 W (at 2.0 m/s). The angle between the horizontal and the line connecting the highest and lowest points of the malleolus trajectory was significantly wider at 1.2 m/s than at 2.0 m/s (75 ± 4° vs. 63 ± 6°). This could explain the change of power with velocity because all the other kinematic indices considered were similar at the two velocities. These results suggest that the propulsive role of the flutter-kick increases as the swimming velocity decreases.  相似文献   

9.
The purpose of this research was to propose a method to acquire the three-dimensional movement of a roller skiing athlete utilizing a global positioning system (GPS), an atmospheric pressure sensor (APS), and an inertial measurement unit (IMU) to distinguish between diagonal skiing and double poling techniques. In this study, we developed a lightweight wearable sensor that was composed of a GPS, APS, and IMU. For the data collection, two national level athletes roller skied a 1700 m long course where the maximum difference in elevation was 5.3 m. The planar positions of the athletes were based on the longitudinal and latitudinal data provided by the GPS, and the altitude was calculated by the International barometric formula and Laplace transform from the APS. The longitudinal and latitudinal data acquired through GPS had errors within 2 m range at each point. The altitude of Laplace transform from the APS showed errors of less than 1 m at each point. The range of motion of pelvis from the IMU was 34.0?±?3.8° for diagonal skiing, which is wider than the 21.2?±?6.9° for double poling.  相似文献   

10.
Abstract

Micro-sensors were used to quantify macro kinematics of classical cross-country skiing techniques and measure cycle rates and cycle lengths during on-snow training. Data were collected from seven national level participants skiing at two submaximal intensities while wearing a micro-sensor unit (MinimaxX?). Algorithms were developed identifying double poling (DP), diagonal striding (DS), kick-double poling (KDP), tucking (Tuck), and turning (Turn). Technique duration (T-time), cycle rates, and cycle counts were compared to video-derived data to assess system accuracy. There was good reliability between micro-sensor and video calculated cycle rates for DP, DS, and KDP, with small mean differences (Mdiff% = ?0.2 ± 3.2, ?1.5 ± 2.2 and ?1.4 ± 6.2) and trivial to small effect sizes (ES = 0.20, 0.30 and 0.13). Very strong correlations were observed for DP, DS, and KDP for T-time (r = 0.87–0.99) and cycle count (r = 0.87–0.99), while mean values were under-reported by the micro-sensor. Incorrect Turn detection was a major factor in technique cycle misclassification. Data presented highlight the potential of automated ski technique classification in cross-country skiing research. With further refinement, this approach will allow many applied questions associated with pacing, fatigue, technique selection and power output during training and competition to be answered.  相似文献   

11.
During a soccer match, players are often required to control the ball velocity of a kick. However, little information is available for the fundamental qualities associated with kicking at various effort levels. We aimed to illustrate segmental dynamics of the kicking leg during soccer instep kicking at submaximal efforts. The instep kicking motion of eight experienced university soccer players (height: 172.4 ± 4.6 cm, mass: 63.3 ± 5.2 kg) at 50, 75 and 100% effort levels were recorded by a motion capture system (500 Hz), while resultant ball velocities were monitored using a pair of photocells. Between the three effort levels, kinetic adjustments were clearly identified in both proximal and distal segments with significantly different (large effect sizes) angular impulses due to resultant joint and interaction moments. Also, players tended to hit an off-centre point on the ball using a more medial contact point on the foot and with the foot in a less upright position in lower effort levels. These results suggested that players control their leg swing in a context of a proximal to distal segmental sequential system and add some fine-tuning of the resultant ball velocity by changing the manner of ball impact.  相似文献   

12.
The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.  相似文献   

13.
The aims of the study were to: (1) adapt the "double-push" technique from inline skating to cross-country skiing; (2) compare this new skiing technique with the conventional skate skiing cross-country technique; and (3) test the hypothesis that the double-push technique improves skiing speed in a short sprint. 13 elite skiers performed maximum-speed sprints over 100 m using the double-push skate skiing technique and using the conventional "V2" skate skiing technique. Pole and plantar forces, knee angle, cycle characteristics, and electromyography of nine lower body muscles were analysed. We found that the double-push technique could be successfully transferred to cross-country skiing, and that this new technique is faster than the conventional skate skiing technique. The double-push technique was 2.9 +/- 2.2% faster (P < 0.001), which corresponds to a time advantage of 0.41 +/- 0.31 s over 100 m. The double-push technique had a longer cycle length and a lower cycle rate, and it was characterized by higher muscle activity, higher knee extension amplitudes and velocities, and higher peak foot forces, especially in the first phase of the push-off. Also, the foot was more loaded laterally in the double-push technique than in the conventional skate skiing technique.  相似文献   

14.
The purpose of this paper was to establish postural cues in kicking that may be of use to goalkeepers. Eight male soccer players (age 20.5 ± 1.1 yrs; height 1.78 ± 0.053 m; mass 75.18 ± 9.66 kg) performed three types of kick: a low side-foot kick to the left hand corner of the goal, a low side-foot kick straight ahead, and a low instep kick straight ahead. Kicks were recorded by an optoelectronic motion analysis system at 240 Hz. At kicking foot take-off (about 200 ms before ball contact) the variables which were significantly different and could act as cues were support foot progression angle, pelvis rotation, and kicking hip and ankle flexion. The support foot progression angle was considered to be the most valuable of these variables as its angle coincided with the direction of ball projection. The other variables were less clear in their interpretation and so less valuable for a goalkeeper to use for decision making. Cues appearing after support foot contact were thought unlikely to be of value to a goalkeeper in their decision making. These include kicking leg knee flexion angle, and support leg shank and thigh angles.  相似文献   

15.
Kicking for distance in Australian Rules football is an important skill. Here, I examine technical aspects that contribute to achieving maximal kick distance. Twenty-eight elite players kicked for distance while being videoed at 500 Hz. Two-dimensional digitized data of nine body landmarks and the football were used to calculate kinematic parameters from kicking foot toe-off to the instant before ball contact. Longer kick distances were associated with greater foot speeds and shank angular velocities at ball contact, larger last step lengths, and greater distances from the ground when ball contact occurred. Foot speed, shank angular velocity, and ball position relative to the support foot at ball contact were included in the best regression predicting distance. A continuum of technique was evident among the kickers. At one end, kickers displayed relatively larger knee angular velocities and smaller thigh angular velocities at ball contact. At the other end, kickers produced relatively larger thigh angular velocities and smaller knee angular velocities at ball contact. To increase kicking distance, increasing foot speed and shank angular velocity at ball contact, increasing the last step length, and optimizing ball position relative to the ground and support foot are recommended.  相似文献   

16.
The purpose was to study the adaptation to speed in the temporal patterns of the movement cycle and determine any differences in velocity, cycle rate and cycle length at the maximum speed level in the different classical style and freestyle cross‐country skiing techniques. Eight skilled male cross‐country skiers were filmed with a digital video camera in the sagittal plane while skiing on a flat cross‐country ski track. The skiers performed three classical style techniques the diagonal stride, kick double poling and the double poling technique and four freestyle techniques paddle dance (gear 2), double dance (gear 3), single dance (gear 4) and combiskate (gear 5) at four different self‐selected speed levels slow, medium, fast and their maximum. Cycle duration, cycle rate, cycle length, and relative and absolute cycle phase duration of the different techniques at the different speed levels were analysed by means of a video analysis system. The cycle rate in all tested classical and freestyle techniques was found to increase significantly (p < .01) with speed from slow to maximum. Simultaneously, there was a significant decrease in the absolute phase durations of all the investigated skiing techniques. A minor, not significant, change in cycle length, and the significant increase in cycle rate with speed showed that the classical and freestyle cross‐country skiing styles are dependent, to a large extent, on an increase in cycle rate for speed adaptation. A striking finding was the constant relative phase duration with speed, which indicates a simplified neural control of the speed adaptation in both cross‐country skiing styles. For the practitioner, the knowledge about the importance of increasing cycle frequency rather than cycle length in the speed adaptation can be used to optimise a rapid increase in speed. The knowledge about the decrease in absolute phase duration, especially the thrust phase duration, points to the need for strength and technique training to enable force production at a high cycle rate and skiing speed. The knowledge that the relative phase duration stays constant with speed may be used to simplify the learning of the different cross‐country skiing techniques.  相似文献   

17.
This study aimed to assess the effects of post-activation potentiation in the strength related variables of a kick start. Thirteen competitive swimmers performed three kick starts after a standardized warm up (denoted USUAL) and another after inducing post-activation through five isotonic repetitions on an eccentric flywheel (denoted PAP). A T-test was used to quantify differences between USUAL and PAP warm up. The best trial of each subject achieved by natural conditions (denoted PEAK) was compared with data obtained after PAP. An instrumented starting block with independent triaxial force plates, collected the strength variables related with the impulse at take off. Improvements in the vertical components of force were observed after PAP compared with USUAL, meanwhile no differences were detected on the horizontal components of it. The velocity at take off was higher after PAP compared with USUAL (4.32 ± 0.88 vs 3.93 ± 0.60 m*s-1; p = 0.02). No differences in force or velocity were detected comparing PAP with PEAK (4.13 ± 0.62 m*s-1, p = 0.11). The PAP warm-up increased vertical force and it was transferred to a higher resultant velocity at take-off. This improvement would equal the best result possible obtained in natural conditions after some trials.  相似文献   

18.
PurposeThis study aimed to compare biomechanical aspects of a novel “running” diagonal stride (DSRUN) with “conventional” diagonal stride (DSCONV) skiing techniques performed at high speed.MethodsTen elite Italian male junior cross-country skiers skied on a treadmill at 10 km/h and at a 10° incline utilizing both variants of the diagonal stride technique. The 3-dimensional kinematics of the body, poles, and roller skis; the force exerted through the poles and foot plantar surfaces; and the angular motion of the leg joints were determined.ResultsCompared to DSCONV, DSRUN demonstrated shorter cycle times (1.05 ± 0.05 s vs. 0.75 ± 0.03 s (mean ± SD), p < 0.001) due to a shorter rolling phase (0.40 ± 0.04 s vs. 0.09 ± 0.04 s, p < 0.001); greater force applied perpendicularly to the roller skis when they had stopped rolling forward (413 ± 190 N vs. 890 ± 170 N, p < 0.001), with peak force being attained earlier; prolonged knee extension, with a greater range of motion during the roller ski-stop phase (28° ± 4° vs. 16° ± 3°, p = 0.00014); and more pronounced hip and knee flexion during most of the forward leg swing. The mechanical work performed against friction during rolling was significantly less with DSRUN than with DSCONV (0.04 ± 0.01 J/m/kg vs. 0.10 ± 0.02 J/m/kg, p < 0.001).ConclusionOur findings demonstrate that DSRUN is characterize by more rapid propulsion, earlier leg extension, and a greater range of motion of knee joint extension than DSCONV. Further investigations, preferably on snow, should reveal whether DSRUN results in higher acceleration and/or higher peak speed.  相似文献   

19.
In the sport of alpine skiing, knowledge about the centre of mass (CoM) kinematics (i.e. position, velocity and acceleration) is essential to better understand both performance and injury. This study proposes a global navigation satellite system (GNSS)-based method to measure CoM kinematics without restriction of capture volume and with reasonable set-up and processing requirements. It combines the GNSS antenna position, terrain data and the accelerations acting on the skier in order to approximate the CoM location, velocity and acceleration. The validity of the method was assessed against a reference system (video-based 3D kinematics) over 12 turn cycles on a giant slalom skiing course. The mean (± s) position, velocity and acceleration differences between the CoM obtained from the GNSS and the reference system were 9 ± 12 cm, 0.08 ± 0.19 m · s-1 and 0.22 ± 1.28 m · s-2, respectively. The velocity and acceleration differences obtained were smaller than typical differences between the measures of several skiers on the same course observed in the literature, while the position differences were slightly larger than its discriminative meaningful change. The proposed method can therefore be interpreted to be technically valid and adequate for a variety of biomechanical research questions in the field of alpine skiing with certain limitations regarding position.  相似文献   

20.
This study aimed to analyse the kinematic, kinetic and electromyographic characteristics of four front crawl flip turn technique variants. The variants distinguished from each other by differences in body position (i.e. dorsal, lateral, ventral) during rolling, wall support, pushing and gliding phases. Seventeen highly trained swimmers (17.9 ± 3.2 years old) participated in interventional sessions and performed three trials of each variant, being monitored with a 3-D video system, a force platform and an electromyography (EMG) system. Studied variables: rolling time and distance, wall support time, push-off time, peak force and horizontal impulse at wall support and push-off, centre of mass horizontal velocity at the end of the push-off, gliding time, centre of mass depth, distance, average and final velocity during gliding, total turn time and electrical activity of Gastrocnemius Medialis, Tibialis Anterior, Biceps Femoris and Vastus Lateralis muscles. Depending on the variant, total turn time ranged from 2.37 ± 0.32 to 2.43 ± 0.33 s, push-off force from 1.86 ± 0.33 to 1.92 ± 0.26 BW and centre of mass velocity during gliding from 1.78 ± 0.21 to 1.94 ± 0.22 m · s?1. The variants were not distinguishable in terms of kinematical, kinetic and EMG parameters during the rolling, wall support, pushing and gliding phases.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号