首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
Abstract

Weight-bearing activity has been shown to increase bone mineral density. Our purpose was to measure vertical ground reaction forces (GRFs) during cyclocross-specific activities and compute their osteogenic index (OI). Twenty-five healthy cyclocross athletes participated. GRF was measured using pressure-sensitive insoles during seated and standing cycling and four cyclocross-specific activities: barrier flat, barrier uphill, uphill run-up, downhill run-up. Peak and mean GRF values, according to bodyweight, were determined for each activity. OI was computed using peak GRF and number of loading cycles. GRF and OI were compared across activities using repeated-measures ANOVA. Number of loading cycles per activity was 6(1) for barrier flat, 8(1) barrier uphill, 7(1) uphill run-up, 12(3) downhill run-up. All activities had significantly (P < 0.01) higher peak GRF, mean GRF values and OI when compared to both seated and standing cycling. The barrier flat condition (P < 0.01) had highest peak (2.9 times bodyweight) and mean GRF values (2.3 times bodyweight). Downhill run-up (P < 0.01) had the highest OI (6.5). GRF generated during the barrier flat activity is similar in magnitude to reported GRFs during running and hopping. Because cyclocross involves weight bearing components, it may be more beneficial to bone health than seated road cycling.  相似文献   

2.
This study aimed to identify the continuous ground reaction force (GRF) features which contribute to higher levels of block phase performance. Twenty-three sprint-trained athletes completed starts from their preferred settings during which GRFs were recorded separately under each block. Continuous features of the magnitude and direction of the resultant GRF signals which explained 90% of the variation between the sprinters were identified. Each sprinter’s coefficient score for these continuous features was then input to a linear regression model to predict block phase performance (normalised external power). Four significant (p < 0.05) predictor features associated with GRF magnitude were identified; there were none associated with GRF direction. A feature associated with greater rear block GRF magnitudes from the onset of the push was the most important predictor (β = 1.185), followed by greater front block GRF magnitudes for the final three-quarters of the push (β = 0.791). Features which included a later rear block exit (β = 0.254) and greater front leg GRF magnitudes during the mid-push phase (β = 0.224) were also significant predictors. Sprint practitioners are encouraged, where possible, to consider the continuous magnitude of the GRFs produced throughout the block phase in addition to selected discrete values.  相似文献   

3.
ABSTRACT

The aims of this study were twofold: firstly, to compare lower limb kinematic and kinetic variables during a sprint and 90° cutting task between two averaging methods of obtaining discrete data (peak of average profile vs. average of individual trial peaks); secondly, to determine the effect of averaging methods on participant ranking of each variable within a group. Twenty-two participants, from multiple sports, performed a 90° cut, whereby lower limb kinematics and kinetics were assessed via 3D motion and ground reaction force (GRF) analysis. Six of the eight dependent variables (vertical and horizontal GRF; hip flexor, knee flexor, and knee abduction moments, and knee abduction angle) were significantly greater (p ≤ 0.001, g = 0.10–0.37, 2.74–10.40%) when expressed as an average of trial peaks compared to peak of average profiles. Trivial (g ≤ 0.04) and minimal differences (≤ 0.94%) were observed in peak hip and knee flexion angle between averaging methods. Very strong correlations (ρ ≥ 0.901, p < 0.001) were observed for rankings of participants between averaging methods for all variables. Practitioners and researchers should obtain discrete data based on the average of trial peaks because it is not influenced by misalignments and variations in trial peak locations, in contrast to the peak from average profile.  相似文献   

4.
Fencing is a high-intensity sport involving dynamic movements such as the lunge exposing the musculoskeletal system to high impact forces, which emphasises the importance of the shock attenuating properties of footwear as a factor in the prevention of injury. The aim of this study was to investigate the magnitudes of the transient axial impact shock experienced at the tibia between traditional fencing shoes and standard athletic footwear during the impact phase of the fencing lunge. Peak tibial shock was measured in 19 male fencers in 4 different footwear conditions using an accelerometer placed on the distal aspect of the tibia. The standard footwear (11.08 g and 8.75 g for squash and running shoe, respectively) resulted in significant (p < 0.01) reductions in peak impact shock in comparison to the traditional fencing shoes (15.93 g and 13.97 g for the Adidas and Hi-Tec shoe, respectively). No significant differences were found between the running and squash shoes (p = 0.09) or between the fencing shoes (p = 0.48). The documented reduction in impact shock found suggests that running or squash specific footwear may reduce overuse injury occurrence, indicating that there is justification for a re-design of fencing shoes.  相似文献   

5.
Metatarsal and midfoot injuries are common in American football. Footwear design may influence injury rates by altering plantar foot loading patterns in these regions. The purpose of this study was to determine the effect of cleat design on in-shoe plantar foot loading during a football-specific, resisted pushing task. Twenty competitive football players (age 14.7 ± 1.8 years, height 1.72 ± 0.10 m, and mass 71.8 ± 26.9 kg) completed three trials of pushing a weighted sled at maximal effort in a standard shoe (CLEAT) and artificial turf-specific shoe (TURF), with flexible in-shoe force measuring insoles. Repeated measures ANOVAs identified mean differences in maximum force and relative load under all regions of the foot. Results showed higher forces in the CLEAT under the medial (p < 0.001) and lateral (p = 0.004) midfoot, central (p = 0.007) and lateral (p < 0.001) forefoot, and lesser toes (p = 0.01), but lower forces in the hallux (p = 0.02) compared to the TURF shoe. Additionally, relative loading was higher in the CLEAT under the medial (p < 0.001) and lateral (p = 0.002) midfoot and lateral (p < 0.001) forefoot, but lower in the medial forefoot (p = 0.006) and hallux (p < 0.001) compared to the TURF shoe. The two shoes elicited distinct plantar loading profiles and may influence shoe selection decisions during injury prevention or rehabilitation practices.  相似文献   

6.
This study assessed the validity of a tri-axial accelerometer worn on the upper body to estimate peak forces during running and change-of-direction tasks. Seventeen participants completed four different running and change-of-direction tasks (0°, 45°, 90°, and 180°; five trials per condition). Peak crania-caudal and resultant acceleration was converted to force and compared against peak force plate ground reaction force (GRF) in two formats (raw and smoothed). The resultant smoothed (10 Hz) and crania-caudal raw (except 180°) accelerometer values were not significantly different to resultant and vertical GRF for all running and change-of-direction tasks, respectively. Resultant accelerometer measures showed no to strong significant correlations (r = 0.00–0.76) and moderate to large measurement errors (coefficient of variation [CV] = 11.7–23.9%). Crania-caudal accelerometer measures showed small to moderate correlations (r = ? 0.26 to 0.39) and moderate to large measurement errors (CV = 15.0–20.6%). Accelerometers, within integrated micro-technology tracking devices and worn on the upper body, can provide a relative measure of peak impact force experienced during running and two change-of-direction tasks (45° and 90°) provided that resultant smoothed values are used.  相似文献   

7.
Sport-specific resistance training, through limb loading, can be a complimentary training method to traditional resistance training by loading the working muscles during all phases of a specific movement. The purpose of this study was to examine the acute effects of skating with an additional load on the skate, using a skate weight prototype, on kinematics, kinetics, and muscle activation during the acceleration phase while skating on a synthetic ice surface. 10 male hockey skaters accelerated from rest (standing erect with knees slightly bent) under four non-randomized load conditions: baseline 1 (no weight), light (0.9 kg per skate), heavy (1.8 kg per skate), and baseline 2 (no weight). Skating with additional weight caused athletes to skate slower (p < 0.001; η2 = 0.551), and led to few changes in kinematics: hip sagittal range of motion (ROM) decreased (2.2°; p = 0.032; η2 = 0.274), hip transverse ROM decreased (3.4°; p < 0.001; η2 = 0.494), ankle sagittal ROM decreased (2.3°; p = 0.022; η2 = 0.295), and knee sagittal ROM increased (7.8°; p < 0.001, η2 = 0.761). Overall, weighted skates decreased skating velocity, but athletes maintained similar muscle activation profiles (magnitude and trends) with minor changes to their skating kinematics.  相似文献   

8.
ABSTRACT

Loading rates have been linked to running injuries, revealing persistent impact features that change direction among three-dimensional axes in different footwear and footstrike patterns. Extracting peak loads from ground reaction forces, however, can neglect the time-varying loading patterns experienced by the runner in each footfall. Following footwear and footstrike manipulations during laboratory-based overground running, we examined three-dimensional loading rate-time features in each direction (X, Y, Z) using principal component analysis. Twenty participants (9 M, 11 F, age: 25.3 ± 3.6 y) were analysed during 14 running trials in each of two footwear (cushioned and minimalist) and three footstrike conditions (forefoot, midfoot, rearfoot). Two principal components (PC) captured the primary loading rate-time features (PC1: 42.5% and PC2: 22.8% explained variance) and revealed interaction among axes, footwear, and footstrike conditions (PC1: F (2.1, 40.1) = 5.6, p = 0.007, η 2 = 0.23; PC2: F (2.0, 38.4) = 62.3, p < 0.001, η 2 = 0.77). Rearfoot running in cushioned footwear attenuated impact loads in the vertical direction, and forefoot running in minimalist footwear attenuated impact loads in the anterior-posterior and medial-lateral directions relative to forefoot running in cushioned shoes. Loading patterns depend on footwear and footstrike interactions, which require shoes that match the runner’s footstrike pattern.  相似文献   

9.
Landing with a low knee flexion angle after volleyball block jumps may be associated with an increased risk of anterior cruciate ligament (ACL) injury. The aim of the present study was to identify the types of volleyball landings after blocks where the knee flexion angle is found to be under a critical knee flexion angle value of 30° at the instant of the first peak of the ground reaction force (GRF). Synchronized kinematic and kinetic data were collected for each trial. T-tests were used to determine if each knee flexion angle at the instant of the peak GRF was significantly different from the critical value of 30°. A repeated measures ANOVA was used to compare knee flexion angle, time to first peak and the magnitude of the first peak of the resultant GRF and knee stiffness. Significantly lower knee flexion angles were found in the “go” landing (p?=?.01, ES?=?0.6) and the “reverse” landing (p?=?.02, ES?=?0.6) only. The results for knee flexion angle and GRF parameters indicated a significant difference between a “reverse” and “go” and other types of landings, except the “side stick” landing for GRF. The “reverse” and “go” landings may present a risk for ACL injury due to the single-leg landing of these activities that have an associated mediolateral movement.  相似文献   

10.
Purpose: This feasibility study compared the effects of 2 movement programs, traditional and mastery climate (i.e., the Children’s Health Activity Motor Program [CHAMP]), on lesson context and children’s physical activity (PA) levels. A secondary aim was to examine sex differences in PA levels in both programs. Method: Seventy-two preschoolers served as participants and were assigned to a movement program. Physical activity levels and lesson context were assessed with the System for Observing Fitness Instruction Time. Results: Preschoolers in CHAMP spent more time walking (p < .05, d = 3.3), more time in moderate-to-vigorous PA (MVPA; p < .05, d = 3.6), and less time standing (p < .05, d = 3.8) compared with those in a traditional movement program. Boys in both programs spent less time standing (p < .05, d = 4.8) and more time in vigorous activity (p < .05, d = 5.8) and MVPA (p < .05, d = 4.4) compared with girls. During CHAMP, children spent less time engaged in management and knowledge (p < .05, d = 1.4, and p < .001, d = 0.9, respectively) and more time in skill practice (p < .05, d = 1.5). Conclusion: The findings support that participation in CHAMP elicits more MVPA in preschool-age children compared with a traditional movement program. The Children’s Health Activity Motor Program provided children with more class time devoted to skill practice. The program appears to be an innovative approach that is beneficial for PA engagement and could contribute positively to children’s health.  相似文献   

11.
  相似文献   

12.
A protocol has been developed to obtain two-dimensional kinematic shoe data of football players in their training environment through high-speed video analysis. Such kinematic data can provide an understanding of how to better replicate the boundary conditions of football movements when simulated using mechanical traction and penetration test devices. As part of a pilot study, 11 youth academy players from a Premiership football club performed football-specific movements which were filmed at 1000 frames s-1. The protocol required minimal set-up time and the area of the pitch to be filmed could be positioned in any part of the playing area, causing low disruption to the players. This aimed to ensure that the movements performed were representative of those carried out during competitive play. Results in this study are concerned with the kinematics of the shoe during contact with the ground for movements identified to be important in terms of injury risk and loss of performance (slipping). Shoe velocities and orientations were measured for subjects wearing shoes of different stud types (traditional round studs versus contemporary bladed studs) on two surfaces (artificial turf, in-filled with rubber and sand, versus a natural surface). All the parameters measured from the relatively small population of subjects had high variances and therefore few significant effects of studs and surface could be found. The data does however provide insight into the appropriate boundary conditions to be used in mechanical test devices. For example, in the forefoot push-off movement it can be seen that test devices should measure the traction forces when the shoe first starts to move, as this is when the player would lose performance, as opposed to the maximum traction which can occur after significant displacement of the shoe through the surface. Analysis of the orientation and velocity path of the studs just before contact with the ground shows that the studs could be aligned to enhance their penetration into the surface and optimise the traction properties of the studs. In order to determine the orientation and velocity of the shoes at crucial phases in movements force-plate data obtained in the laboratory should be utilised in future studies.  相似文献   

13.
Abstract

Researchers and clinicians have suggested that overuse injuries to the lower back and lower extremities of figure skaters may be associated with the repeated high impact forces sustained during jump landings. Our primary aim was to compare the vertical ground reaction forces (GRFs) in freestyle figure skaters (n = 26) and non-skaters (n = 18) for the same barefoot single leg landing on a force plate from a 20 cm platform. Compared with non-skaters, skaters exhibited a significantly greater normalised peak GRF (3.50 ± 0.47 × body weight for skaters vs. 3.13 ± 0.45 × body weight for non-skaters), significantly shorter time to peak GRF (81.21 ± 14.01 ms for skaters vs. 93.81 ± 16.49 ms for non-skaters), and significantly longer time to stabilisation (TTS) of the GRF (2.38 ± 0.07 s for skaters vs. 2.22 ± 0.07 s for non-skaters). Skaters also confined their centre of pressure (CoP) to a significantly smaller mediolateral (M–L) (25%) and anterior–posterior (A–P) (40%) range during the landing phase, with the position of the CoP located in the mid to forefoot region. The narrower and more forward position of the CoP in skaters may at least partially explain the greater peak GRF, shorter time to peak, and longer TTS. Training and/or equipment modification serve as potential targets to decrease peak GRF by distributing it over a longer time period. More comprehensive studies including electromyography and motion capture are needed to fully characterise the unique figure skater landing strategy.  相似文献   

14.
The purpose of this study was to evaluate the traction characteristics of four different stud configurations on Fédération Internationale de Football Association (FIFA) 2-Star, third-generation artificial soccer turf. The investigated stud configurations were hard ground design, firm ground design, soft ground design, and an experimental prototype. The concept of this study combines performance, perception, biomechanical, and mechanical testing procedures. Twenty-five soccer players took part in the different testing procedures. Variables of this study were: running times, subjective rankings/ratings, ground reaction forces, and mechanical traction properties. Statistical discrimination between the four stud configurations was shown for performance, perception, and biomechanical testing (p < 0.05). Unsuited stud configurations for playing on artificial turf are characterized by less plain distributed and pronounced studs.  相似文献   

15.
This study investigated the effects of body mass and shoe midsole hardness on kinetic and perceptual variables during the performance of three basketball movements: (1) the first and landing steps of layup, (2) shot-blocking landing and (3) drop landing. Thirty male basketball players, assigned into “heavy” (n = 15, mass 82.7 ± 4.3 kg) or “light” (n = 15, mass 63.1 ± 2.8 kg) groups, performed five trials of each movement in three identical shoes of varying midsole hardness (soft, medium, hard). Vertical ground reaction force (VGRF) during landing was sampled using multiple wooden-top force plates. Perceptual responses on five variables (forefoot cushioning, rearfoot cushioning, forefoot stability, rearfoot stability and overall comfort) were rated after each movement condition using a 150-mm Visual Analogue Scale (VAS). A mixed factorial analysis of variance (ANOVA) (Body Mass × Shoe) was applied to all kinetic and perceptual variables. During the first step of the layup, the loading rate associated with rearfoot contact was 40.7% higher in the “heavy” than “light” groups (P = .014) and 12.4% higher in hard compared with soft shoes (P = .011). Forefoot peak VGRF in a soft shoe was higher (P = .011) than in a hard shoe during shot-block landing. Both “heavy” and “light” groups preferred softer to harder shoes. Overall, body mass had little effect on kinetic or perceptual variables.  相似文献   

16.
ABSTRACT

This study examined the effect of wearing time on comfort perception and landing biomechanics of basketball shoes with different midsole hardness. Fifteen basketball players performed drop landing and layup first step while wearing shoes of different wearing time (new, 2-, 4-, 6- and 8-week) and hardness (soft, medium and hard). Two-way ANOVA with repeated measures was performed on GRF, ankle kinematic and comfort perception variables. Increased wearing time was associated with poorer force attenuation and comfort perception during landing activities (p < 0.05). The new shoes had significantly smaller forefoot (2- and 4-week) and rearfoot peak GRF impacts (all time conditions) in drop landing and smaller rearfoot peak GRF impact (6- and 8-week) in layup; shoes with 4-week of wearing time had significantly better perceptions of forefoot cushioning, forefoot stability, rearfoot cushioning, rearfoot stability and overall comfort than the new shoes (p < 0.05). Compared with hard shoes, the soft shoes had better rearfoot cushioning but poorer forefoot cushioning (p < 0.05). Shoe hardness and wearing time would play an influential role in GRF and comfort perception, but not in ankle kinematics. Although shoe cushioning performance would decrease even after a short wearing period, the best comfort perception was found at 4-week wearing time.  相似文献   

17.
The purpose of this study was to identify the influence of cryotherapy on lower extremity running biomechanics. Twenty-six healthy male volunteers were randomised into two intervention groups: cold water (cold water at ~11°C) or tepid water (tepid water at ~26°C). They were required to run at 4.0 ± 0.2 m · s?1 before and after they underwent water immersion for 20 min. Differences between pre- and post-intervention were used to compare the influence of water intervention during running. Peak joint angles, peak joint moments, peak ground reaction forces (GRF) and contact time (CT) were calculated using three-dimensional gait analysis. Independent t-tests were applied with a significant alpha level set at 0.05. Decreased peak propulsive and vertical GRF, decreased plantarflexion moments, increased hip flexion angle and longer CT were observed following cold water immersion. Although cold water immersion (cryotherapy) affected the running movement, none of the alterations have been related to running biomechanical patterns associated with injuries. Therefore, our results indicated that cold water immersion appears safe prior to running activities.  相似文献   

18.
ABSTRACT

The majority of barefoot running studies have not considered speed as an influential factor on foot strike pattern. The aim of this study was to investigate differences in foot strike pattern and spatiotemporal characteristics between barefoot and shod overground running at varying speeds. We first determined maximal running speed (Vm) over 50 m in 15 recreationally active men who self-reported as habitual rearfoot strikers. Participants then completed shod and barefoot running trials at different speeds equivalent to approximately 90%, 80%, 70% and 60% of Vm. Sagittal plane two-dimensional (2D) foot-ground contact angle, ankle plantar-dorsi flexion angle, contact time, flight time, step length and step rate variables for each trial were recorded. A significant interaction effect of running speed and footwear condition (p < 0.05) on foot-ground contact angle, ankle plantar-dorsi flexion angle and contact time was observed. There was a main effect of running speed (p < 0.01) on flight time, step length and step rate. There was a main effect of footwear condition on step length (p < 0.01). Participants were more inclined to plantarflex the ankle and contact the ground with the forefoot at higher percentages of Vm, especially when running barefoot.  相似文献   

19.
Repeated movement (RM) lunge that frequently executed in badminton might be used for footwear evaluation. This study examined the influence of single movement (SM) and RM lunges on the ground reaction forces (GRFs) and knee kinetics during the braking phase of a badminton lunge step. Thirteen male university badminton players performed left-forward lunges in both SM and RM sessions. Force platform and motion capturing system were used to measure GRFs and knee kinetics variables. Paired t-test was performed to determine any significant differences between SM and RM lunges regarding mean and coefficient of variation (CV) in each variable. The kinetics results indicated that compared to SM lunges, the RM lunges had shorter contact time and generated smaller maximum loading rate of impact force, peak knee anterior-posterior force, and peak knee sagittal moment but generated larger peak horizontal resultant forces (Ps < 0.05). Additionally, the RM lunges had lower CV for peak knee medial-lateral and vertical forces (Ps < 0.05). These results suggested that the RM testing protocols had a distinct loading response and adaptation pattern during lunge and that the RM protocol showed higher within-trial reliability, which may be beneficial for the knee joint loading evaluation under different interventions.  相似文献   

20.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号