首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 796 毫秒
1.
Multiple playing surfaces and footwear used in American football warrant a better understanding of relationship between different combinations of turf and footwear. The purpose of this study was to examine effects of shoe and stud types on ground reaction force (GRF) and ankle and knee kinematics of a 180° cut and a single-leg 90° land-cut on synthetic turf. Fourteen recreational football players performed five trials of the 180° cut and 90° land-cut in three shoe conditions: non-studded running shoe, and football shoe with natural and synthetic turf studs. Variables were analyzed with a 3 × 2 (shoe × movement) repeated measures analysis of variance (p < 0.05). Peak vertical GRF (p < 0.001) and loading rate (p < 0.001) were greater during 90° land-cut than 180° cut. For 180° cut, natural turf studs produced smaller peak medial GRFs compared to synthetic turf studs and non-studded shoe (p = 0.012). For land-cut, peak eversion velocity was reduced in running shoes compared to natural (p = 0.016) and synthetic (p = 0.002) turf studs. The 90° land-cut movement resulted in greater peak vertical GRF and loading rate compared to the 180° cut. Overall, increased GRFs in the 90° land-cut movement may increase the chance of injury.  相似文献   

2.
Abstract

Weight-bearing activity has been shown to increase bone mineral density. Our purpose was to measure vertical ground reaction forces (GRFs) during cyclocross-specific activities and compute their osteogenic index (OI). Twenty-five healthy cyclocross athletes participated. GRF was measured using pressure-sensitive insoles during seated and standing cycling and four cyclocross-specific activities: barrier flat, barrier uphill, uphill run-up, downhill run-up. Peak and mean GRF values, according to bodyweight, were determined for each activity. OI was computed using peak GRF and number of loading cycles. GRF and OI were compared across activities using repeated-measures ANOVA. Number of loading cycles per activity was 6(1) for barrier flat, 8(1) barrier uphill, 7(1) uphill run-up, 12(3) downhill run-up. All activities had significantly (P < 0.01) higher peak GRF, mean GRF values and OI when compared to both seated and standing cycling. The barrier flat condition (P < 0.01) had highest peak (2.9 times bodyweight) and mean GRF values (2.3 times bodyweight). Downhill run-up (P < 0.01) had the highest OI (6.5). GRF generated during the barrier flat activity is similar in magnitude to reported GRFs during running and hopping. Because cyclocross involves weight bearing components, it may be more beneficial to bone health than seated road cycling.  相似文献   

3.
The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.  相似文献   

4.
The aim of this study was to explore the relationships between lower limb joint kinetics, external force production and starting block performance (normalised average horizontal power, NAHP). Seventeen male sprinters (100 m PB, 10.67 ± 0.32 s) performed maximal block starts from instrumented starting blocks (1000 Hz) whilst 3D kinematics (250 Hz) were also recorded during the block phase. Ankle, knee and hip resultant joint moment and power were calculated at the rear and front leg using inverse dynamics. Average horizontal force applied to the front (r = 0.46) and rear (r = 0.44) block explained 86% of the variance in NAHP. At the joint level, many “very likely” to “almost certain” relationships (r = 0.57 to 0.83) were found between joint kinetic data and the magnitude of horizontal force applied to each block although stepwise multiple regression revealed that 55% of the variance in NAHP was accounted for by rear ankle moment, front hip moment and front knee power. The current study provides novel insight into starting block performance and the relationships between lower limb joint kinetic and external kinetic data that can help inform physical and technical training practices for this skill.  相似文献   

5.
Abstract

Researchers and clinicians have suggested that overuse injuries to the lower back and lower extremities of figure skaters may be associated with the repeated high impact forces sustained during jump landings. Our primary aim was to compare the vertical ground reaction forces (GRFs) in freestyle figure skaters (n = 26) and non-skaters (n = 18) for the same barefoot single leg landing on a force plate from a 20 cm platform. Compared with non-skaters, skaters exhibited a significantly greater normalised peak GRF (3.50 ± 0.47 × body weight for skaters vs. 3.13 ± 0.45 × body weight for non-skaters), significantly shorter time to peak GRF (81.21 ± 14.01 ms for skaters vs. 93.81 ± 16.49 ms for non-skaters), and significantly longer time to stabilisation (TTS) of the GRF (2.38 ± 0.07 s for skaters vs. 2.22 ± 0.07 s for non-skaters). Skaters also confined their centre of pressure (CoP) to a significantly smaller mediolateral (M–L) (25%) and anterior–posterior (A–P) (40%) range during the landing phase, with the position of the CoP located in the mid to forefoot region. The narrower and more forward position of the CoP in skaters may at least partially explain the greater peak GRF, shorter time to peak, and longer TTS. Training and/or equipment modification serve as potential targets to decrease peak GRF by distributing it over a longer time period. More comprehensive studies including electromyography and motion capture are needed to fully characterise the unique figure skater landing strategy.  相似文献   

6.
The arm swing in hockey skating can have a positive effect on the forces produced by each skate, and the resulting velocity from each push off. The main purpose of this study was to measure the differences in ground reaction forces (GRFs) produced from an anteroposterior versus a mediolateral style hockey skating arm swing. Twenty-four elite-level female hockey players performed each technique while standing on a ground-mounted force platform, and all trials were filmed using two video cameras. Force data was assessed for peak scaled GRFs in the frontal and sagittal planes, and resultant GRF magnitude and direction. Upper limb kinematics were assessed from the video using Dartfish video analysis software, confirming that the subjects successfully performed two distinct arm swing techniques. The mediolateral arm swing used a mean of 18.38° of glenohumeral flexion/extension and 183.68° of glenohumeral abduction/adduction while the anteroposterior technique used 214.17° and 28.97° respectively. The results of this study confirmed that the mediolateral arm swing produced 37% greater frontal plane and 33% less sagittal plane GRFs than the anteroposterior arm swing. The magnitudes of the resultant GRFs were not significantly different between the two techniques; however, the mediolateral technique produced a resultant GRF with a significantly larger angle from the direction of travel (44.44°) as compared to the anteroposterior technique (31.60°). The results of this study suggest that the direction of GRFs produced by the mediolateral arm swing more closely mimic the direction of lower limb propulsion during the skating stride.  相似文献   

7.
ABSTRACT

The aims of this study were (a) to describe the kinematics underlying the phenomenon of the knee of the swing leg passing medially in front of the athlete during the single push (SP) phase of the block sprint start, and (b) to determine the relationships between block phase pelvis range of motion (RoM), 1st step width and block phase performance. Three-dimensional kinematic data (250 Hz) were collected from eleven competitive sprinters (100 m PB: 11.17 ± 0.41) performing maximal effort block starts. The joint angles of the rear hip with respect to the pelvis and the pelvis segment angles with respect to the laboratory coordinate system were calculated during the block start phase to the end of the 1st stance. A combination of pelvis list and rotation (not hip adduction) was coupled with the thigh of the swing leg moving medially during the SP phase. A very high positive correlation was found between pelvic list RoM and 1st step width (r = 0.799, p = 0.003). No other significant correlations were found. Attempting to reduce pelvic RoM or changing frontal and transverse plane hip joint angles to minimise medial thigh motion is unlikely to lead to an improvement to performance.  相似文献   

8.
Abstract

Push Hand is an advanced training technique for the Yang-style old frame 108 forms Tai Chi Chuan. It is performed by two practitioners. To clarify how people use forces during Push Hand training, it is important to review the ground reaction force (GRF). Here, we quantify the characteristics of the GRF during Push Hand training. Kinematic data and GRF data from 10 Tai Chi Chuan practitioners (29.9 ± 7.87 years) were synchronously recorded using a three-dimensional motion analysis system (200 frames · s?1) and three-dimensional force plates (1000 Hz). The resultant GRF for both feet for the 0%, 50% and 100% phases of attack and defence were compared to body weight using a paired-samples t-test. The differences in the resultant GRF between the 0%, 50% and 100% phases of attack and defence were tested by one-way repeated-measures ANOVA. The significance level was set to 0.05. The total resultant GRF was almost equal to the participant’s body weight in push hand. This result was consistent throughout the entire push hand process. Our results revealed that the GRF was comparable to the body weight, implying that practitioners do not push or resist their opponents during the push hand process.  相似文献   

9.
This study re-evaluated the magnitude of hand propulsion (HP) in the pull and push phases of the front crawl stroke and investigated the association between the angular velocity of shoulder roll (ωSR) and hand propulsive lift (HPL). ωSR was computed in the plane normal to a forward direction for 16 skilled swimmers performing the front crawl stroke at a maximal sprinting pace. HP, hand propulsive drag (HPD) and HPL were determined by a dynamic pressure approach. HP and HPD in the pull phase were greater than in the push phase (P < 0.05) while HPL in the pull phase was similar to that in the push phase. Eleven swimmers out of the 16 swimmers had a significant within-swimmers correlation between ωSR and HPL in the push phase (P < 0.05). That is, HPL increased in the push phase as the ωSR of rolling back to the neutral position became faster. A swimmer should use more drag for hand propulsion in the pull phase and propulsion from drag and lift equally in the push phase. Based on the relationship between ωSR and HPL in the push phase, a possible stroke technique to enhance HPL using ωSR is discussed.  相似文献   

10.
The aim of this study was to compare the musculature activity and kinematics of knee and hip joints during front and back squat with maximal loading. Two-dimensional kinematical data were collected and electromyographic activities of vastus lateralis, vastus medialis, rectus femoris, semitendinosus, biceps femoris, gluteus maximus and erector spinae were measured while participants (n = 12, 21.2 ± 1.9 years old) were completing front and back squat exercises with maximum loading. Paired sample t-test was used for comparisons between two techniques. Results showed that the electromyographic activity of vastus medialis was found to be greater in the front squat compared to the back squat during the ascending phase (P < 0.05, d = 0.62; 95% CI, ?15.0/?4.17) and the whole manoeuvre (P < 0.05, d = 0.41; 95% CI, ?12.8/?0.43), while semitendinosus (P < 0.05, d = ?0.79; 95% CI, 0.62/20.59) electromyographic activity was greater in the back squat during the ascending phase. Compared to the front squat version, back squat exhibited significantly greater trunk lean, with no differences occurring in the knee joint kinematics throughout the movement. Results may suggest that the front squat may be preferred to the back squat for knee extensor development and for preventing possible lumbar injuries during maximum loading.  相似文献   

11.
Abstract

This study investigated lower-limb kinematics to explain the techniques used to achieve high levels of sprint start performance. A cross-sectional design was used to examine relationships between specific technique variables and horizontal external power production during the block phase. Video data were collected (200 Hz) at the training sessions of 16 sprinters who ranged in 100 m personal best times from 9.98 to 11.6 s. Each sprinter performed three 30 m sprints and reliable (all intraclass correlation coefficients, ICC(2,3) ≥ 0.89) lower-limb kinematic data were obtained through manual digitising. The front leg joints extended in a proximal-to-distal pattern for 15 sprinters, and a moderate positive relationship existed between peak front hip angular velocity and block power (r = 0.49, 90% confidence limits = 0.08–0.76). In the rear leg, there was a high positive relationship between relative push duration and block power (r = 0.53, 90% confidence limits = 0.13–0.78). The rear hip appeared to be important; rear hip angle at block exit was highly related to block power (r = 0.60, 90% confidence limits = 0.23–0.82), and there were moderate positive relationships with block power for its range of motion and peak angular velocity (both r = 0.49, 90% confidence limits = 0.08–0.76). As increased block power production was not associated with any negative aspects of technique in the subsequent stance phase, sprinters should be encouraged to maximise extension at both hips during the block phase.  相似文献   

12.
ABSTRACT

The skating acceleration to maximal speed transition (sprint) is an essential skill that involves substantial lower body strength and effective propulsion technique. Coaches and athletes strive to understand this optimal combination to improve performance and reduce injury risk. Hence, the purpose of this study was to compare body centre of mass and lower body kinematic profiles from static start to maximal speed of high calibre male and female ice hockey players on the ice surface. Overall, male and female skaters showed similar centre of mass trajectories, though magnitudes differed. The key performance difference was the male’s greater peak forward skating speed (8.96 ± 0.44 m/s vs the females’ 8.02 ± 0.36 m/s, p < 0.001), which was strongly correlated to peak leg strength (R 2 = 0.81). Males generated greater forward acceleration during the initial accelerative steps, but thereafter, both sexes had similar stride-by-stride accelerations up to maximal speed. In terms of technique, males demonstrated greater hip abduction (p = 0.006) and knee flexion (p = 0.026) from ice contact to push off throughout the trials. For coaches and athletes, these findings underscore the importance of leg strength and widely planted running steps during the initial skating technique to achieve maximal skating speed over a 30 m distance.  相似文献   

13.
Abstract

The aim of the study was to examine several physiological responses to a climbing-specific task to identify determinants of endurance in sport rock climbing. Finger strength and endurance of intermediate rock climbers (n = 11) and non-climbers (n = 9) were compared using climbing-specific apparatus. After maximum voluntary contraction (MVC) trials, two isometric endurance tests were performed at 40% (s = 2.5%) MVC until volitional exhaustion (continuous contractions and intermittent contractions of 10 s, with 3 s rest between contractions). Changes in muscle blood oxygenation and muscle blood volume were recorded in the flexor digitorum superficialis using near infra-red spectroscopy. Statistical significance was set at P < 0.05. Climbers had a higher mean MVC (climbers: 485 N, s = 65; non-climbers 375 N, s = 91) (P = 0.009). The group mean endurance test times were similar. The force – time integral, used as a measure of climbing-specific endurance, was greater for climbers in the intermittent test (climbers: 51,769 N · s, s = 12,229; non-climbers: 35,325 N · s, s = 9724) but not in the continuous test (climbers: 21,043 N · s, s = 4474; non-climbers: 15,816 N · s, s = 6263). Recovery of forearm oxygenation during rest phases (intermittent test) explained 41.1% of the variability in the force – time integral. Change in total haemoglobin was significantly greater in non-climbers (continuous test) than climbers (P = 0.023 – 40% test timepoint, P = 0.014 – 60% test timepoint). Pressor responses were similar between groups and not related to the force – time integral for either test. We conclude that muscle re-oxygenation during rest phases is a predictor of endurance performance.  相似文献   

14.
Spin bowling is generally coached using a standard technical framework, but this practice has not been based upon a comparative biomechanical analysis of leg-spin and off-spin bowling. This study analysed the three-dimensional (3D) kinematics of 23 off-spin and 20 leg-spin bowlers using a Cortex motion analysis system to identify how aspects of the respective techniques differed. A multivariate ANOVA found that certain data tended to validate some of the stated differences in the coaching literature. Off-spin bowlers had a significantly shorter stride length (p = 0.006) and spin rate (p = 0.001), but a greater release height than leg-spinners (p = 0.007). In addition, a number of other kinematic differences were identified that were not previously documented in coaching literature. These included a larger rear knee flexion (p = 0.007), faster approach speed (p < 0.001), and flexing elbow action during the arm acceleration compared with an extension action used by most of the off-spin bowlers. Off-spin and leg-spin bowlers also deviated from the standard coaching model for the shoulder alignment, front knee angle at release, and forearm mechanics. This study suggests that off-spin and leg-spin are distinct bowling techniques, supporting the development of two different coaching models in spin bowling.  相似文献   

15.
The purpose of this study was to assess the validity of accelerometers using force plates (i.e., ground reaction force (GRF)) during the performance of different tasks of daily physical activity in children. Thirteen children (10.1 (range 5.4–15.7) years, 3 girls) wore two accelerometers (ActiGraph GT3X+ (ACT), GENEA (GEN)) at the hip that provide raw acceleration signals at 100 Hz. Participants completed different tasks (walking, jogging, running, landings from boxes of different height, rope skipping, dancing) on a force plate. GRF was collected for one step per trial (10 trials) for ambulatory movements and for all landings (10 trials), rope skips and dance procedures. Accelerometer outputs as peak loading (g) per activity were averaged. ANOVA, correlation analyses and Bland–Altman plots were computed to determine validity of accelerometers using GRF. There was a main effect of task with increasing acceleration values in tasks with increasing locomotion speed and landing height (P < 0.001). Data from ACT and GEN correlated with GRF (r = 0.90 and 0.89, respectively) and between each other (r = 0.98), but both accelerometers consistently overestimated GRF. The new generation of accelerometer models that allow raw signal detection are reasonably accurate to measure impact loading of bone in children, although they systematically overestimate GRF.  相似文献   

16.
Many coaches often instruct swimmers to keep the elbow in a high position (high elbow position) during early phase of the underwater stroke motion (pull phase) in front crawl, however, the high elbow position has never been quantitatively evaluated. The aims of this study were (1) to quantitatively evaluate the “high elbow” position, (2) to clarify the relationship between the high elbow position and required upper limb configuration and (3) to examine the efficacy of high elbow position on the resultant swimming velocity. Sixteen highly skilled and 6 novice male swimmers performed 25 m front crawl with maximal effort and their 3-dimensional arm stroke motion was captured at 60 Hz. An attempt was made to develop a new index to evaluate the high elbow position (Ihe: high elbow index) using 3-dimensional coordinates of the shoulder, elbow and wrist joints. Ihe of skilled swimmers moderately correlated with the average shoulder internal rotation angle (r = ?0.652, < 0.01) and swimming velocity (r = ?0.683, P < 0.01) during the pull phase. These results indicate that Ihe is a useful index for evaluating high elbow arm stroke technique during the pull phase in front crawl.  相似文献   

17.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

18.
Landing with a low knee flexion angle after volleyball block jumps may be associated with an increased risk of anterior cruciate ligament (ACL) injury. The aim of the present study was to identify the types of volleyball landings after blocks where the knee flexion angle is found to be under a critical knee flexion angle value of 30° at the instant of the first peak of the ground reaction force (GRF). Synchronized kinematic and kinetic data were collected for each trial. T-tests were used to determine if each knee flexion angle at the instant of the peak GRF was significantly different from the critical value of 30°. A repeated measures ANOVA was used to compare knee flexion angle, time to first peak and the magnitude of the first peak of the resultant GRF and knee stiffness. Significantly lower knee flexion angles were found in the “go” landing (p?=?.01, ES?=?0.6) and the “reverse” landing (p?=?.02, ES?=?0.6) only. The results for knee flexion angle and GRF parameters indicated a significant difference between a “reverse” and “go” and other types of landings, except the “side stick” landing for GRF. The “reverse” and “go” landings may present a risk for ACL injury due to the single-leg landing of these activities that have an associated mediolateral movement.  相似文献   

19.
ABSTRACT

The aims of this study were twofold: firstly, to compare lower limb kinematic and kinetic variables during a sprint and 90° cutting task between two averaging methods of obtaining discrete data (peak of average profile vs. average of individual trial peaks); secondly, to determine the effect of averaging methods on participant ranking of each variable within a group. Twenty-two participants, from multiple sports, performed a 90° cut, whereby lower limb kinematics and kinetics were assessed via 3D motion and ground reaction force (GRF) analysis. Six of the eight dependent variables (vertical and horizontal GRF; hip flexor, knee flexor, and knee abduction moments, and knee abduction angle) were significantly greater (p ≤ 0.001, g = 0.10–0.37, 2.74–10.40%) when expressed as an average of trial peaks compared to peak of average profiles. Trivial (≤ 0.04) and minimal differences (≤ 0.94%) were observed in peak hip and knee flexion angle between averaging methods. Very strong correlations (ρ ≥ 0.901, < 0.001) were observed for rankings of participants between averaging methods for all variables. Practitioners and researchers should obtain discrete data based on the average of trial peaks because it is not influenced by misalignments and variations in trial peak locations, in contrast to the peak from average profile.  相似文献   

20.
We investigated whether heart rate (HR)-derived parameters are accurate performance predictors in endurance recreational runners. One hundred thirty recreational athletes completed an incremental running test (4´running + 1´rest). After each stage, we recorded HR, % of maximum HR (%HRmax), and blood lactate. We also assessed HR after each recovery period, and calculated lactate and HR recovery thresholds and HR deflection point. We tested these parameters for associations with running performance, as measured by peak treadmill speed (PTS) and personal best International Association of Athletics Federations (IAAF) score. The %HRmax at 14.5 km·h?1 correlated with PTS (r = ?0.92), and IAAF score (rho = ?0.80). The magnitudes of the correlations of lactate-related parameters with PTS (|r| = 0.84 to 0.86) or IAAF score (|rho| = 0.70 to 0.77) in absolute values were slightly lower. The correlations detected between other HR-derived parameters and running performance were weaker (|r or rho| = 0.24 to 0.70). Regression models identified %HRmax at 14.5 km·h?1 as the strongest predictor of both PTS (β = ?0.72) and IAAF score (β = ?0.72). Consequently, tests based on %HRmax may provide a non-invasive and inexpensive alternate method for predicting the performance of these athletes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号