首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In this study, the effect of strapping rowers to their sliding seat on performance during 75 m on-water starting trials was investigated. Well-trained rowers performed 75 m maximum-effort starts using an instrumented single scull equipped with a redesigned sliding seat system, both under normal conditions and while strapped to the sliding seat. Strapping rowers to their sliding seat resulted in a 0.45 s lead after 75 m, corresponding to an increase in average boat velocity of about 2.5%. Corresponding effect sizes were large. No significant changes were observed in general stroke cycle characteristics. No indications of additional boat heaving and pitching under strapped conditions were found. The increase in boat velocity is estimated to correspond to an increase in average mechanical power output during the start of on-water rowing between 5% and 10%, which is substantial but smaller than the 12% increase found in a previous study on ergometer starting. We conclude that, after a very short period of adaptation to the strapped condition, single-scull starting performance is substantially improved when the rower is strapped to the sliding seat.  相似文献   

2.
Oar force and oar angle data resulting from a 6‐min maximal rowing ergometer test undertaken by novice (n = 9), good (n ‐ 23) and national (n = 9) level male rowers, were used to identify biomechanical performance variables which accurately discriminated between rowers of differing ability levels. The variables included two work capacity measures, mean propulsive power output per kilogram of body mass (W kg‐1) and propulsive work consistency (%), and two skill variables, stroke‐to‐stroke consistency (%) and stroke smoothness (%). Discriminant function analysis indicated the presence of two functions, both of which clearly indicated the importance of mean propulsive power output per kilogram of body mass as a discriminating variable. Function 2 gave greater weight to stroke‐to‐stroke consistency and stroke smoothness than function 1; however, function 1 was the most powerful discriminator. Classification procedures were used to predict the ability level to which a rower most likely belonged and involved defining the ‘distance’ between each rower and each ability level centroid, with the rower being classified into the ‘nearest’ ability level. These procedures indicated that 100% of the elite, 73.9% of the good, 88.9% of the novice and 82.9% of all rowers were correctly classified into their respective skill levels. Stepwise discriminant analysis included the variables in the following order: mean propulsive power output per kilogram of body mass, stroke‐to‐stroke consistency, stroke smoothness and propulsive work consistency (P < 0.001). The results of this study indicate that biomechanical performance variables related to rowing capacity and skill may be identified and used to discriminate accurately between rowers of differing skill levels, and that, of these variables, propulsive work consistency is the least effective discriminator.  相似文献   

3.
Mechanical power output is a key performance-determining variable in many cyclic sports. In rowing, instantaneous power output is commonly determined as the dot product of handle force moment and oar angular velocity. The aim of this study was to show that this commonly used proxy is theoretically flawed and to provide an indication of the magnitude of the error. To obtain a consistent dataset, simulations were performed using a previously proposed forward dynamical model. Inputs were previously recorded rower kinematics and horizontal oar angle, at 20 and 32 strokes?min?1. From simulation outputs, true power output and power output according to the common proxy were calculated. The error when using the common proxy was quantified as the difference between the average power output according to the proxy and the true average power output (P?residual), and as the ratio of this difference to the true average power output (ratiores./rower). At stroke rate 20, P?residual was 27.4 W and ratiores./rower was 0.143; at stroke rate 32, P?residual was 44.3 W and ratiores./rower was 0.142. Power output in rowing appears to be underestimated when calculated according to the common proxy. Simulations suggest this error to be at least 10% of the true power output.  相似文献   

4.
Abstract

Rowers sit on a seat that slides relative to the boat/ergometer. If a rower lifts him or herself from this sliding seat at any time, the seat will move away from under them and the rowing action is disrupted. From a mechanical perspective, it is clear that the need for the rower to remain in contact with the sliding seat at all times imposes position-dependent constraints on the forces exerted at the oar handle and the footstretcher. Here we investigate if the mechanical power output during rowing, which is strongly related to these forces, might be improved if the contact with the sliding seat was of no concern to the rower. In particular, we examine if elimination of these constraints by strapping the rower to the sliding seat leads to an increase in performance during the start on a standard rowing ergometer. Eleven well-trained female rowers performed 5-stroke starts in normal and strapped conditions. Handle force, vertical seat force, footstretcher force, and handle kinematics were recorded, from which mechanical power and work output were calculated. Most of the relevant mechanical variables differed significantly between the normal and strapped conditions. Most importantly, mechanical power output (averaged over the 5-stroke start) in the strapped condition was 12% higher than in the normal condition. We conclude that strapping a rower's pelvis to the sliding seat allows more vigorous execution of the stroke phases, resulting in a substantial improvement in performance during the start of ergometer rowing.  相似文献   

5.
The purpose of this study was to compare rowing technique on the dynamic RowPerfect ergometer with a single scull. Eight national-level rowers performed on both the RowPerfect ergometer and in a single scull over 500 m, at rates of 24, 26, and 28 strokes/minute. Blade force and oar angle (on-water) and handle force and stroke length (on the ergometer) were measured. Both force and stroke angle/length were normalised from 0 to 100 (where 100 was the peak value). Body positions of the subjects at both the catch and finish of each of these rowing strokes were also compared for each stroke rate. The coefficient of multiple determination (CMD) was used to measure the consistency of force curves over a sample of five sequential strokes for each rower. Cross-correlations were performed between the left- and right-side on-water sculling force curves and a mean of these values with the ergometer curve for each rower. Stroke angle/length, which did not vary with rate, was similar for both forms of rowing. The CMDs showed a high consistency across the normalised strokes of each subject (approximately 0.98). Cross-correlation values of 0.91, 0.92, and 0.93 were recorded between the force curves from the ergometer and on-water trials for stroke rates of 24, 26, and 28 strokes/minute, respectively. The mean trunk, thigh and lower leg angles at the catch and finish of the stroke were also similar across the stroke rates as determined by t-tests. Results indicate that technique used on the RowPerfect ergometer was similar to that for on-water sculling, thus validating its use in off-water training.  相似文献   

6.
Abstract

In rowing, power is inevitably lost as kinetic energy is imparted to the water during push-off with the blades. Power loss is estimated from reconstructed blade kinetics and kinematics. Traditionally, it is assumed that the oar is completely rigid and that force acts strictly perpendicular to the blade. The aim of the present study was to evaluate how reconstructed blade kinematics, kinetics, and average power loss are affected by these assumptions. A calibration experiment with instrumented oars and oarlocks was performed to establish relations between measured signals and oar deformation and blade force. Next, an on-water experiment was performed with a single female world-class rower rowing at constant racing pace in an instrumented scull. Blade kinematics, kinetics, and power loss under different assumptions (rigid versus deformable oars; absence or presence of a blade force component parallel to the oar) were reconstructed. Estimated power losses at the blades are 18% higher when parallel blade force is incorporated. Incorporating oar deformation affects reconstructed blade kinematics and instantaneous power loss, but has no effect on estimation of power losses at the blades. Assumptions on oar deformation and blade force direction have implications for the reconstructed blade kinetics and kinematics. Neglecting parallel blade forces leads to a substantial underestimation of power losses at the blades.  相似文献   

7.
Abstract

Our aim was to present a mathematical model of rowing and sculling that allowed for a comparison of oar blade designs. The relative movement between the oar blades and water during the drive phase of the stroke was modelled, and the lift and drag forces generated by this complex interaction were determined. The model was driven by the oar shaft angular velocity about the oarlock in the horizontal plane, and was shown to be valid against measured on-water mean steady-state shell velocity for both a heavyweight men's eight and a lightweight men's single scull. Measured lift and drag force coefficients previously presented by the authors were used as inputs to the model, whichs allowed for the influence of oar blade design on rowing performance to be determined. The commonly used Big Blade, which is curved, and it's flat equivalent were compared, and blade curvature was shown to generate a 1.14% improvement in mean boat velocity, or a 17.1-m lead over 1500 m. With races being won and lost by much smaller margins than this, blade curvature would appear to play a significant role in propulsion.  相似文献   

8.
All those who compete in the sport of rowing have used the land rowing machine, Ergometer (commonly called the ‘erg’), manufactured by Concept II (Morrisville, Vermont, USA). Ergon is the Greek word for work, hence the Ergometer measures work. Rowers are commonly ranked according to their ‘erg score.’ The fault in this ranking is that the land Ergometer cannot account for many of the important technical aspects associated with rowing on the water. The goals of this project were to (1) develop a system for on-the-water measurement of work during rowing and then (2) demonstrate the potential of such a system to quantify performance and improve rowing technique. To achieve these goals, force was measured using strain gauges glued to the shaft of the rowing oar and angular displacement was measured using a potentiometer. The force and displacement measurements were sent to a microcontroller, which calculated the total work done in a particular stroke, as well as other parameters, and displayed the values to the rower. The parameters were used to evaluate the performance of three collegiate rowers on the water. The data were also used to plot force profiles, which were reviewed with each rower and the coach to illustrate the rowers’ habits and facilitate improving technique. One rower was ‘tutored’ with the device through five on-the-water practices, after which his force profiles and parameter values demonstrated significant improvement. The device not only provided a standard to which all rowers were compared on the water, but also supplied the rowers with important information on technical aspects of their strokes and pacing themselves.  相似文献   

9.
Abstract

The aims of this study were to examine the use of the critical velocity test as a means of predicting 2000-m rowing ergometer performance in female collegiate rowers, and to study the relationship of selected physiological variables on performance times. Thirty-five female collegiate rowers (mean ± s: age 19.3 ± 1.3 years; height 1.70 ± 0.06 m; weight 69.5 ± 7.2 kg) volunteered to participate in the study. Rowers were divided into two categories based on rowing experience: varsity (more than 1 year collegiate experience) and novice (less than 1 year collegiate experience). All rowers performed two continuous graded maximal oxygen consumption tests (familiarization and baseline) to establish maximal oxygen uptake ([Vdot]O2max), peak power output, and power output at ventilatory threshold. Rowers then completed a critical velocity test, consisting of four time-trials at various distances (400 m, 600 m, 800 m, and 1000 m) on two separate days, with 15 min rest between trials. Following the critical velocity test, rowers completed a 2000-m time-trial. Absolute [Vdot]O2max was the strongest predictor of 2000-m performance (r = 0.923) in varsity rowers, with significant correlations also observed for peak power output and critical velocity (r = 0.866 and r = 0.856, respectively). In contrast, critical velocity was the strongest predictor of 2000-m performance in novice rowers (r = 0.733), explaining 54% of the variability in performance. These findings suggest the critical velocity test may be more appropriate for evaluating performance in novice rowers.  相似文献   

10.
The aims of this study were to examine the use of the critical velocity test as a means of predicting 2000-m rowing ergometer performance in female collegiate rowers, and to study the relationship of selected physiological variables on performance times. Thirty-five female collegiate rowers (mean ± s: age 19.3 ± 1.3 years; height 1.70 ± 0.06 m; weight 69.5 ± 7.2 kg) volunteered to participate in the study. Rowers were divided into two categories based on rowing experience: varsity (more than 1 year collegiate experience) and novice (less than 1 year collegiate experience). All rowers performed two continuous graded maximal oxygen consumption tests (familiarization and baseline) to establish maximal oxygen uptake (VO(2max)), peak power output, and power output at ventilatory threshold. Rowers then completed a critical velocity test, consisting of four time-trials at various distances (400 m, 600 m, 800 m, and 1000 m) on two separate days, with 15 min rest between trials. Following the critical velocity test, rowers completed a 2000-m time-trial. Absolute VO(2max) was the strongest predictor of 2000-m performance (r = 0.923) in varsity rowers, with significant correlations also observed for peak power output and critical velocity (r = 0.866 and r = 0.856, respectively). In contrast, critical velocity was the strongest predictor of 2000-m performance in novice rowers (r = 0.733), explaining 54% of the variability in performance. These findings suggest the critical velocity test may be more appropriate for evaluating performance in novice rowers.  相似文献   

11.
中国赛艇优秀男子轻量级运动员技术特征分析   总被引：3，自引：1，他引：2  
通过研制的赛艇实船力量测试系统对我国优秀男子轻量级运动员技术特点进行了测试分析。结果表明该系统为科学地评定、改进和完善赛艇技术提供了强有力的工具。目前我国男子轻量级多人艇技术配合上的主要问题是身体移动、停止、再启动时机不一致，身体的整体重心回位不够及时，另外，桨叶入水时拉桨不够迅速、圆滑，腿部蹬力过大。经过测试分析以后，包括老运动员在内，技术动作得到明显的改进和完善。  相似文献   

12.
Coaches, sport scientists and researchers assess rowing performance on-water and on a variety of ergometers. Ergometers are frequently used because of the easier assessment environment. However, there is limited information on the ability of rowers to reproduce mean power or time-trial time when using different rowing ergometers (Concept II and RowPerfect) or completing tests over different distances (500 m versus 2000 m races). To test the efficacy of an intervention on a rower's ability to produce power, or to monitor that ability, it is essential to determine a reliable rowing performance test. The per cent standard error of measurement in performance (assessed by mean power and time-trial time) of fifteen national standard rowers was determined for five repeated 500 m and two repeated 2000 m races on a Concept II and RowPerfect ergometer. The per cent standard error of measurement (% SEM) in mean power between 5x500m races, regardless of gender, was 2.8% (95% confidence limits (CL)=2.3 to 3.4%) for the Concept II ergometer and 3.3% (95% CL=2.5 to 3.9%) for the RowPerfect ergometer (n = 15). Over 2000 m the per cent standard error of measurement in mean power was 1.3% (95% CL 0.9 to 2.9%) for the Concept II ergometer and 3.3% (95% CL 2.2 to 7.0%) for the RowPerfect ergometer The results highlight an increase in per cent standard error of the mean during performance races of less than 2000m on the Concept II ergometer, and performance races on the RowPerfect ergometer compared with the Concept II ergometer over 500 m and 2000 m. The most appropriate protocol for testing the influence of an intervention on the ability of a rower to produce power would be 2000 m races on a Concept II ergometer.  相似文献   

13.
在研制了一种同步检测赛艇运动员手与脚运动生物力学信息的水上实船多源传感信息获取与评价系统的基础上,将该系统长期应用于国家队和部分省队。通过该系统采集国家队两名女子公开级运动员在桨频Sr=32下的实船训练数据,分别从动作结构、桨下支点、手脚配合、左右两边发力对称性等方面对两名运动员的技术特征进行分析,揭示了赛艇运动中的关键技术问题。  相似文献   

14.
Abstract

We evaluated (1) the test–retest reliability of the Wingate test conducted on a rowing ergometer, and (2) the sensitivity of this test in determining the differences in performance attained by 12- to 18-year-old rowers. Altogether, 297 male rowers aged 12.0–18.9 years (mean ± s: 14.8 ± 1.7) completed a maximal 30-s test on a rowing ergometer, and 80 rowers representing all age groups were retested after 5–7 days. No change was evident in participants' performance in terms of mean power output (P = 0.726; Cohen's d = 0.04), maximal power output (P = 0.567; Cohen's d = 0.06), and minimum power output (P = 0.318; Cohen's d = 0.11) in the second test. The intra-class correlation coefficients were high (≥0.973) and coefficients of variation were low (≤7.3%). A series of analyses of variance were used to compare the performances among 12- to 18-year-old rowers, and age-related increases in performance were evident (P < 0.001; Cohen's d = 1.91–1.96). The age-related increases in performance were similar, although reduced, when the effects of body mass were partitioned out when using analysis of covariance (P < 0.001; Cohen's d = 0.82–0.85). The results suggest that: (1) the described test is reliable and can be used for maximal-intensity exercise assessment in youth rowing, and (2) it discriminates performance among 12- to-18-year-old rowers.  相似文献   

15.
Our aim was to present a mathematical model of rowing and sculling that allowed for a comparison of oar blade designs. The relative movement between the oar blades and water during the drive phase of the stroke was modelled, and the lift and drag forces generated by this complex interaction were determined. The model was driven by the oar shaft angular velocity about the oarlock in the horizontal plane, and was shown to be valid against measured on-water mean steady-state shell velocity for both a heavyweight men's eight and a lightweight men's single scull. Measured lift and drag force coefficients previously presented by the authors were used as inputs to the model, whichs allowed for the influence of oar blade design on rowing performance to be determined. The commonly used Big Blade, which is curved, and it's flat equivalent were compared, and blade curvature was shown to generate a 1.14% improvement in mean boat velocity, or a 17.1-m lead over 1500 m. With races being won and lost by much smaller margins than this, blade curvature would appear to play a significant role in propulsion.  相似文献   

16.
Abstract

This study assessed muscle recruitment patterns and stroke kinematics during ergometer and on-water rowing to validate the accuracy of rowing ergometry. Male rowers (n = 10; age 21 ± 2 years, height 1.90 ± 0.05 m and body mass 83.3 ± 4.8 kg) performed 3 × 3 min exercise bouts, at heart and stroke rates equivalent to 75, 85 and 95% V?O2peak, on both dynamic and stationary rowing ergometers, and on water. During exercise, synchronised data for surface electromyography (EMG) and 2D kinematics were recorded. Overall muscle activity was quantified by the integration of rmsEMG and averaged for each 10% interval of the stroke cycle. Muscle activity significantly increased in rectus femoris (RF) and vastus medialis (VM) (P <0.01), as exercise intensity increased. Comparing EMG data across conditions revealed significantly (P <0.05) greater RF and VM activity during on-water rowing at discrete 10% intervals of stroke cycle. In addition, the drive/recovery ratio was significantly lower during dynamic ergometry compared to on-water (40 ± 1 vs. 44 ± 1% at 95%, P <0.01). Results suggest that significant differences exist while comparing recruitment and kinematic patterns between on-water and ergometer rowing. These differences may be due to altered acceleration and deceleration of moving masses on-ergometer not perfectly simulating the on-water scenario.  相似文献   

17.
ABSTRACT

Post-activation potentiation likely acutely improves power-based performance; however, few studies have demonstrated improved endurance performance. Forty collegiate female rowers performed isometric potentiating (ISO), dynamic potentiating (DYN) and control (CON) warm-up protocols on a rowing ergometer, followed by a three-minute all-out test to evaluate their total distance, peak power, mean power, critical power, anaerobic working capacity (W’) and stroke rate. Fifteen-second splits were also analysed. ISO consisted of 5 × 5-second static muscle actions with the ergometer handle rendered immovable with a nylon strap, while DYN consisted of 2 × 10-second all-out rowing bouts, separated by a 2-minute rest interval. The participants were divided into high and low experience groups by median experience level (3.75 years) for statistical analysis. Significant differences (DYN > CON; p < 0.05) were found for distance (+5.6 m), mean power (+5.9 W) and W’ (+1561.6 J) for more experienced rowers (n = 19) and no differences for less experienced rowers (n = 18). Mean power in DYN was significantly greater than CON and ISO in the 15–30, 30–45, 45–60 and 60–75 second intervals independent of experience level. These results suggest that DYN may benefit experienced female rowers and that these strategies might benefit a greater power output over shorter distances regardless of experience.  相似文献   

18.
Effect of stroke rate on the distribution of net mechanical power in rowing   总被引：1，自引：1，他引：0  
The aim of this study was to assess the effect of manipulating stroke rate on the distribution of mechanical power in rowing. Two causes of inefficient mechanical energy expenditure were identified in rowing. The ratio between power not lost at the blades and generated mechanical power (P(rower)) and the ratio between power not lost to velocity fluctuations and P(rower) were used to quantify efficiency (e(propelling) and e(velocity) respectively). Subsequently, the fraction of P(rower) that contributes to the average velocity (chi(boat)) was calculated (e(net)). For nine participants, stroke rate was manipulated between 20 and 36 strokes per minute to examine the effect on the power flow. The data were analysed using a repeated-measures analysis of variance. Results indicated that at higher stroke rates, P(rower), chi(boat), e(propelling), and e(net) increase, whereas e(velocity) decreases (P < 0.0001). The decrease in e(velocity) can be explained by a larger impulse exchange between rower and boat. The increase in e(propelling) can be explained because the work at the blades decreases, which in turn can be explained by a change in blade kinematics. The increase in e(net) results because the increase in e(propelling) is higher than the decrease in e(velocity). Our results show that the power equation is an adequate conceptual model with which to analyse rowing performance.  相似文献   

19.
We evaluated (1) the test-retest reliability of the Wingate test conducted on a rowing ergometer, and (2) the sensitivity of this test in determining the differences in performance attained by 12- to 18-year-old rowers. Altogether, 297 male rowers aged 12.0-18.9 years (mean?±?s: 14.8?±?1.7) completed a maximal 30-s test on a rowing ergometer, and 80 rowers representing all age groups were retested after 5-7 days. No change was evident in participants' performance in terms of mean power output (P?=?0.726; Cohen's d?=?0.04), maximal power output (P?=?0.567; Cohen's d?=?0.06), and minimum power output (P?=?0.318; Cohen's d?=?0.11) in the second test. The intra-class correlation coefficients were high (≥0.973) and coefficients of variation were low (≤7.3%). A series of analyses of variance were used to compare the performances among 12- to 18-year-old rowers, and age-related increases in performance were evident (P?相似文献   

20.
The general aim of this study was to examine the relations between rigging set up, anthropometry, physical capacity, rowing kinematics and rowing performance. Fifteen elite single scullers participated in the experiment. Each sculler's preferred rigging set-up was quantified using measurements that included oar length, inboard, span, gearing ratio, swivel-seat height, footstretcher-seat height and distance, and footstretcher angles. Rowing performance was assessed using 2000 m race times from the Australian National Selection trials. Selected anthropometric, physical capacity and kinematic variables were also quantified. Several rigging variables were significantly correlated with each other, and with various anthropometric, physical capacity and kinematic variables. The individual variables that had the highest correlations with race time were 2 km ergometer time (r=0.90), mass (r=-0.87), height (r=-0.86), oar length (r = -0.85) and strength (r = -0.84). Overall results of this study indicated that the fastest rowers tend to be the largest and strongest, and that these larger body dimensions are reflected in the choice of rigging settings. Rigging set-up by itself should not be considered to be a primary determinant of rowing performance, but rather a consequence of faster rowers being larger and stronger and scaling their rigging set-up accordingly. To maximise rowing performance it appears important to tune the rigging of the boat to match the rower's size and strength.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号