首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
In this paper, the target tracking control problem is investigated for an underactuated autonomous underwater vehicle (AUV) in the presence of actuator faults and external disturbances based on event-triggered mechanism. Firstly, the five degrees-of-freedom kinematic and dynamic models are constructed for an underactuated AUV, where the backstepping method is introduced as the major control framework. Then, radial basis function neural network (RBFNN) and adaptive control method are made full use of estimating and compensating the influences of uncertain information and actuator faults. Besides, the relative threshold event-triggered strategy is integrated into the tracking control to further reduce communication burden from the controller to the actuator. Moreover, through Lyapunov analysis, it is proved that the designed controllers guarantee that the tracking error variables of the underactuated AUV are uniformly ultimately bounded and can converge to a small neighborhood of the origin. Finally, the effectiveness and reasonableness of the designed tracking controllers are illustrated by comparative simulations.  相似文献   

2.
This paper addresses the adaptive optimal containment control issue for non-affine nonlinear multi-agent systems in the presence of periodic disturbances. To deal with the disturbed internal dynamics, a fourier series expansion-neural networks-based adaptive identifier is designed for each follower, such that the restrictions posed on the system dynamics are released. Then,an adaptive dynamic programming technique is adopted to acquire the optimized virtual and actual controllers under a simplified actor-critic architecture, where the critic aims to appraise control performance and the actor aims to perform control task. Note that the above updating laws are constructed by the negative gradient of a designed function, which is constructed on the basis of the partial derivative of Hamilton-Jacobi-Bellman equation. Finally, simulation results are provided to show the applicability and effectiveness of the containment control scheme.  相似文献   

3.
In this work, aiming at the trajectory tracking control of the quadrotor UAV subject to external disturbances and model uncertainties, a finite-time approach with preassigned performance guaranteed is proposed. First, the control system is decoupled into translational and rotational subsystems. Then, in both two subsystems, the performance bounds constructed by the newly established appointed-time performance functions are devised for guaranteeing the tracking performance, and the controllers are designed via applying the dynamic surface control technique with integral barrier Lyapunov functions involved. Moreover, finite-time tracking differentiators and finite-time multivariable disturbance observers are exploited to estimate the target signals and the lumped disturbances, respectively. Finally, two examples of simulation are carried out to validate the effectiveness and superiority of the proposed control method.  相似文献   

4.
This paper studies the problem of finite-time formation tracking control for networked nonaffine nonlinear systems with unmeasured dynamics and unknown uncertainties/disturbances under directed topology. A unified distributed control framework is proposed by integrating adaptive backstepping control, dynamic gain control and dynamic surface control based on finite-time theory and consensus theory. Auxiliary dynamics are designed to construct control gains with non-Lipschitz dynamics so as to guarantee finite-time convergence of formation errors. Adaptive control is used to compensate for uncertain control efforts of the transformed systems derived from original nonaffine systems. It is shown that formation tracking is achieved during a finite-time period via the proposed controller, where fractional power terms are only associated with auxiliary dynamics instead of interacted information among the networked nonlinear systems in comparison with most existing finite-time cooperative controllers. Moreover, the continuity of the proposed controller is guaranteed by setting the exponents of fractional powers to an appropriate interval. It is also shown that the improved dynamic surface control method could guarantee finite-time convergence of formation errors, which could not be accomplished by conventional dynamic surface control. Finally, simulation results show the effectiveness of the proposed control scheme.  相似文献   

5.
This paper is concerned with the global projective synchronization in fixed time for complex dynamical networks (CDNs) with nonidentical nodes in the presence of disturbances. Firstly, in order to realize the fixed-time projective synchronization of CDNs with matched disturbances, the second-order sliding mode is established, and the global fixed-time reachability of sliding manifolds is analyzed. The fixed-time stability of the sliding mode dynamics is also proved analytically based on Lyapunov stability theory. Moreover, the fixed convergence time of both reaching and sliding mode phases can be adjusted to any desired values in advance by the choice of the designable parameters. Secondly, in order to realize the fixed-time projective synchronization of CDNs with mismatched disturbances, a super-twisting-like (STL) controller, which does not require the information of the derivative of the sliding variable, is designed, and the synchronization condition is addressed in terms of linear matrix inequalities (LMIs). By the proposed controllers, continuous control signals can be provided to reduce the chattering effect and improve the control accuracy. Finally, two numerical examples are given to demonstrate the validity of the theoretical results and the the feasibility of the proposed approaches.  相似文献   

6.
This paper investigates the tracking control problem of nonholonomic multiagent systems with external disturbances. For this purpose, distributed finite time controllers (DFCs) based on the terminal sliding mode method are proposed to ensure that states of the agents track the states of the target in a finite time. Furthermore, a distributed estimator (DE) is designed for each agent to estimate the target's states. The stability analysis of DFCs and DE is also considered. Simulation examples demonstrate the promising performance of the proposed algorithms.  相似文献   

7.
An Antilock Braking System (ABS) is characterized by nonlinear dynamics, which render more difficult the design of a controller for high performance. The problem is even harder due to the uncertainties on the parameters appearing in its dynamics. In this paper, an ABS laboratory setup is considered, which mimics a quarter car model. A super–twisting controller is proposed to overcome the problem due to parameter uncertainties. This controller is designed in order to impose a reference value of the tire slip. Two cases are considered: in the first, nominal ABS parameters are used in the controller, whereas in the second the controller embeds an estimator of the tire–road friction coefficient, which is one of most critical parameters. The friction coefficient is estimated in finite–time by means of a high–order sliding mode differentiator. The original contributions of the paper are the real–time implementation of the super–twisting controller for the laboratory setup under study, and the use of a super–twisting estimator to provide a finite–time estimation of the friction coefficient between the tire and the road, along with a comparison with classical PI–like and super–twisting controllers, available in the literature. The ABS laboratory setup allows checking experimentally the performance of the proposed nonlinear dynamic controller, showing a considerable increase of the efficiency of the control system.  相似文献   

8.
Aiming at the problems of unstable batch control of key crystal quality parameters and susceptibility to batch-to-batch non-repetitive disturbances during repeated operation of single crystal furnaces, this paper proposes a data-driven iterative learning model predictive control method based on an adaptive iterative extended state observer (IESO) for designing melt temperature and crystal diameter learning controllers with disturbance suppression. By applying dynamic linearization techniques and model predictive control strategies along the iterative axis, an ILMPC scheme with disturbance compensation terms using only input and output data of the system is designed. Among them, adaptive IESO is used to estimate the disturbance compensation terms. Then, the theoretical analysis shows that the tracking error of the ILMPC scheme can converge to a bounded range as the number of iterations increases. The experimental results verify the effectiveness of the proposed control method, which not only ensures that the control system has learning ability, but also achieves stable and accurate control of crystal quality parameters.  相似文献   

9.
Power-system stability improvement by a static synchronous series compensator (SSSC)-based damping controller is thoroughly investigated in this paper. Both local and remote signals with associated time delays are considered in the present study. The design problem of the proposed controller is formulated as an optimization problem, and differential evolution (DE) algorithm is employed to search for the optimal controller parameters. The performances of the proposed controllers are evaluated under different disturbances for both single-machine infinite-bus power system and multi-machine power system. The performance of the proposed controllers with variations in the signal transmission delays has also been investigated. Simulation results are presented and compared with a recently published modern heuristic optimization technique under various disturbances to show the effectiveness and robustness of the proposed approach. The performances of the proposed controllers are also evaluated under N−2 contingency situation.  相似文献   

10.
This paper provides a new fast design method for robust industrial controllers via majorant systems in the frequency domain. The proposed methodology allows to establish several fast design techniques for a broad class of industrial controllers of plants with internal and/or external delays, parametric and/or structural uncertainties, and subject to disturbances, when an analytical model of the plant or data acquired from simple experimental tests are available. The provided design and control techniques are more general with respect to the Ziegler-Nichols ones and their numerous variants, which, in some cases, do not guarantee the control system stability.The used key idea consists in increasing the frequency response of the process to be controlled with the frequency response of a simpler system, also of order greater than one, with external delay, which allows designing, using simple formulas, controllers of PI, PID, PIDR, PI2, PI2D, PI2DR, PI2D2, and PI2D2R types. The designed controllers always guarantee stability margins larger than those of appropriate reference systems. Therefore, good performance of robustness of the stability and tracking precision of smooth references, with respect to parametric and/or structural uncertainties and/or smooth disturbances, are always guaranteed.The stated general methodology and various performance comparisons, also about the tracking precision of references with bounded first or second derivative, are illustrated and validated in several case studies, experimentally too.  相似文献   

11.
In this work, finite time position and heading control based on backstepping based fast terminal sliding mode control is proposed for coaxial octorotor subjected to external wind disturbances. First, mathematical model of the coaxial octorotor is developed and then a new learning-based technique, an extended inverse multi-quadratic radial basis function network (EIMRBFN) is proposed to estimate the unmodeled dynamics of the octorotor. The external disturbance observer is also designed to encompass the realistic disturbance effect in the dynamical model and to allow the controller handle external disturbances, effectively. Backstepping controller based on fast terminal sliding model control is then proposed and also applied on the resultant dynamical model that provides finite time convergence of system's states. The stability of the proposed controller and complete system is analyzed using Lyapunov stability theory. Finite time convergence analysis of the desired trajectory is also provided. Simulations are carried out to validate the effectiveness of the proposed control scheme. Comparison with traditional PID and LQR controllers also verifies that the proposed controller achieves improved performance.  相似文献   

12.
A novel robust hierarchical multi-loop composite control scheme is proposed for the trajectory tracking control of robotic manipulators subject to constraints and disturbances. The inner loop based on inverse dynamics control is used to reduce the nonlinear tracking error system to a set of decoupled linear subsystems to alleviate the computational effort during the sequel optimization. The feasible regions of the equivalent state and control input of each subsystem can be computed efficiently by choosing an appropriate inertia matrix estimate. The external loop, relying on a set of separate disturbance-observer-based tube model predictive composite controllers, is used to robustly stabilize the decoupled subsystems. In particular, the disturbance observers are designed to compensate for the disturbances actively, while the tube model predictive controllers are used to reject the residual disturbances. The robust tightened constraints are obtained by calculating the outer-bounding-tube-type residual disturbance invariant sets of the closed-loop subsystems. Furthermore, the recursive feasibility and input-to-state stability of the closed-loop system are investigated. The effectiveness of the proposed control scheme is verified by the simulation experiment on a PUMA 560 robotic manipulator.  相似文献   

13.
The dynamics of Pressurized Heavy Water Reactor (PHWR) are complex and open-loop unstable in nature. In such systems, parametric and input disturbances may cause instability if the control system fails to reject these disturbances. For such a large, unstable and uncertain process, designing a control scheme with the ability to reject disturbances along with good reference tracking capabilities is a challenging problem. The control scheme should not only be robust but also deterministic and easier to implement. In order to fulfill all these control scheme requirements for nuclear industries, in this work, a Cross-Coupled Nonlinear Proportional Integral Derivative (CCN-PID) scheme is suggested for a 70th order Multi-Input Multi-Output (MIMO) PHWR. It is also shown in this work that the proposed CCN-PID is a simple Cross-Coupled Proportional, Nonlinear Integrator and Derivative (CC-PNID) sliding surface based Sliding Mode Control (SMC). Furthermore, for the output feedback design, a High Gain Observer (HGO) is constructed for the PHWR process. In order to assure robust stability of the closed loop system, a Lyapunov based analysis of the state feedback CCN-PID control scheme is firstly presented. Then, in a similar way, robust stability analysis of HGO is carried out and finally, the stability analysis of the HGO and CCN-PID based output feedback control scheme is evaluated. In order to investigate the performance of the designed HGO based output feedback CCN-PID control scheme, four different scenarios are simulated. The results of these simulations show that the suggested control scheme efficiently rejects parametric uncertainties and input disturbances and corrects the power tilts while keeping the reactor stable and within safe limits of operation. The results also show that the scheme controls the reactor in an effective manner such that the reactor power closely follows the reference signal. The results of the control scheme presented in this work are also compared with earlier works.  相似文献   

14.
This paper presents a novel continuous fixed-time convergent control law for dynamic systems in the presence of unbounded disturbances. A continuous fixed-time convergent control is designed to drive all states of a multi-dimensional integrator chain at the origin for a finite pre-established (fixed) time, using a scalar input. The fixed-time convergence is established and the uniform upper bound of the settling time is computed. The designed control algorithm is applied to fixed-time stabilization of two mechatronic systems, a cart inverted pendulum and a single machine infinite bus turbo generator with main steam valve control.  相似文献   

15.
The decentralized tracking control methods for large-scale nonlinear systems are investigated in this paper. A backstepping-based robust decentralized adaptive neural H∞ tracking control method is addressed for a class of large-scale strict feedback nonlinear systems with uncertain disturbances. Under the condition that the nonlinear interconnection functions in subsystems are unknown and mismatched, the decentralized adaptive neural network H∞ tracking controllers are designed based on backstepping technology. Neural networks are used to approximate the packaged multinomial including the unknown interconnections and nonlinear functions in the subsystems as well as the derivatives of the virtual controls. The effect of external disturbances and approximation errors is attenuated by H∞ tracking performance. Whether the external disturbances occur or not, the output tracking errors of the close-loop system are guaranteed to be bounded. A practical example is provided to show the effectiveness of the proposed control approach.  相似文献   

16.
In this paper, we develop two new model reference adaptive control (MRAC) schemes for a class of nonlinear dynamic systems that is robust with respect to an uncertain state (output) dependent nonlinear perturbations and/or external disturbances with unknown bounds. The design is based on a controller parametrization with an adaptive integral action. Two types of adaptive controllers are considered—the state feedback controller with a plant parameter identifier, and the output feedback controller with a linear observer.  相似文献   

17.
In this paper, the dynamic event-based resilient consensus control of the multiple networked Euler-Lagrangian (E-L) systems under the Denial of Service (DoS) attacks is considered. Compared with linear cyber-physical systems, nonlinear networked E-L systems are more complex and closer to actual mechanical systems. For the situation where the topology is a strongly connected directed topology, a controller based on a dynamic event-trigger mechanism is designed to achieve consensus control for the networked E-L system in the absence of DoS attacks. Sufficient conditions are presented, which can guarantee the closed-loop system be stable. Then the resilient consensus problem of event-based controllers under energy-constrained DoS attacks is analyzed. The conditions related to the duration and frequency of DoS attacks are given. Zeno behavior is proved does not exist in the proposed control scheme. Finally, some numerical simulation results are given for verifying the theoretical results.  相似文献   

18.
In this paper, the distributed impulsive control for heterogeneous multi-agent systems based on event-triggered approach is investigated. According to whether the information transfer of the dynamic compensator is continuous or not, two different kinds of impulsive controllers are designed, respectively. Based on these two kinds of controllers, the corresponding distributed event-triggered conditions are provided, which make the impulsive instants of all agents do not need occur simultaneously. Moreover, the lower bound of impulsive intervals can also be guaranteed for all the event-triggered conditions, which means that the control schemes given in this paper can avoid the Zeno-behavior successfully. Eventually, a simulation example is proposed to support the effectiveness of the results obtained in this paper.  相似文献   

19.
In this paper, the adaptive event-triggered formation-containment control for unmanned aerial vehicles (UAVs) is investigated in the presence of multiple leaders and external disturbances. By utilizing the leader-following model, the reference leader provides the desired flight trajectory for multiple formation leaders while the followers are driven into the convex hull spanned by the formation leaders. Initially, some effective disturbance observers are designed to obtain the estimations for eliminating the negative effects of external disturbances. Secondly, in order to alleviate the network burden, a dynamic triggering law is designed for the adaptive event-triggered mechanism (AETM) and the triggering frequency is heavily related to the triggering errors. Then, by exploiting Kronecker product technique and Lyapunov stability theory, two sufficient conditions on the stability of closed-loop system are established, which can help achieve the desired formation control target. Furthermore, the controller gains and observer ones can be determined by calculating the derived linear matrix inequalities (LMIs). Finally, a simulation example is given to illustrate the feasibility of the designed control protocol.  相似文献   

20.
This paper focuses on the problem of semi-global output-feedback stabilization for a class of switched nonlinear time-delay systems in strict-feedback form. A switched state observer is first constructed, then switched linear output-feedback controllers for individual subsystems are designed. By skillfully constructing multiple Lyapunov–Krasovskii functionals and successfully solving several troublesome obstacles, such as time-varying delay and switching signals and nonlinearity in the design procedure, the switched linear output-feedback controllers designed can render the resulting closed-loop switched system semi-globally stabilizable under a class of switching signals with average dwell time. Furthermore, under some milder conditions on nonlinearities, the semi-global output-feedback stabilization problem for switched nonlinear time-delay systems is also studied. Simulation studies on two examples, which include a continuous stirred tank reactor, are carried out to demonstrate the effectiveness of the proposed approach.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号