首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 671 毫秒
1.
Sliding mode control algorithms for buck and boost power converters are surveyed in the paper. Current and voltage controls are demonstrated for the both cases. It is shown, that direct voltage control for a boost converter results in unstable zero dynamics. Chattering suppression based on harmonic cancellation principle along with switching frequency control is demonstrated.  相似文献   

2.
This paper investigates a composite controller for load frequency control (LFC) in multi-region interconnected power systems via sliding mode observer design. State observers (SOs) and disturbance observers (DOs) are implied for the LFC based on the load variations with communication delays and quantization output measurements. A nonlinear integral sliding surface combined with a composite controller is developed to optimize control performance. Moreover, a three-area power system model is used to demonstrate the effectiveness of the proposed scheme in the illustrative example, confirming that frequency deviations can be rejected despite delays, uncertainties, and quantization during transmission.  相似文献   

3.
This paper proposes a unified method to design an optimized type of the hysteresis modulation-based sliding mode current controller for non-minimum phase power converters in continuous conduction mode. The traditional sliding mode controlled converters have a slow transient voltage response at heavy loads, a large overshoot at light loads and during abrupt output resistance variations. To solve these problems, an optimized feedback control scheme is used according to the output resistance to adjust the coefficients of the controller. The basic idea of this controller is to suggest a new way for reduction of the sensitivity function amplitude of the closed loop system. The presented approach is developed for three basic DC/DC converters; i.e. boost, buck-boost and quadratic boost converters. Generally, the certain advantages of the suggested control approach are: (i) a fast transient response can be achieved in heavy load conditions, (ii) the voltage overshoot can be effectively reduced during load variations; (iii) the transient voltage overshoot can be eliminated in light load conditions; (iv) the closed loop control sensitivity can be reduced and therefore, the performance specification of a control system can be improved compared with the conventional sliding mode current control. To show the reliability of the suggested control scheme, simulations and experimental results for the derived systems are developed. Several conditions are performed to confirm the effectiveness of the proposed controller.  相似文献   

4.
The issue of adaptive sliding mode controller design via output knowledge is studied for discrete-time Markov jump systems in this paper by means of using singular system scheme. To force the system state onto the sliding motion, an appropriate switching surface depended on the system output is established. Meanwhile, the reachability of the sliding manifold is guaranteed by synthesizing the robust sliding mode controller and adaptive sliding mode controller for the accessible and inaccessible upper bounds of sliding patch, respectively. By using Lyapunov functional technique, sufficient criteria to guarantee the sliding motion to be stochastically admissible are proposed. Then the reachability conditions of the predesigned switching surface are developed. Finally, simulation results are provided to illustrate the effectiveness of the proposed approach.  相似文献   

5.
Conventional Sliding Mode Controllers (SMCs) exhibit a robust performance against matched bounded uncertainties and disturbances by containing them under a fixed controller’s effort. Consequently, the controller is commonly found excessive, leading to chattering and straining the actuator. As a solution, the variable-gain SMCs adapt to the instantaneous system requirements, thus attenuating the aforesaid effects and keeping the SMC’s benefits. However, the reported adaptive laws underlying such behavior commonly require arbitrary design considerations and do not consider practical implementation. Unlikely, in this work, a hysteresis-based adaptability law to drive the sliding variable to a boundary layer around zero is proposed. The sliding boundary—hysteresis’ width—will consistently “bounce” over the sliding variable, trying to shrink against it while preserving the sliding mode. This behavior finds its steady-state once the sliding variable and the sliding boundary’s dynamics are synchronized, with no need of subjective or arbitrary adjustments. The close-loop tuning can be derived from the system’s parameters alone, and its steady-state performance can be quantitatively predicted. Furthermore, a method to adjust the sliding surface parameters according to the system’s desired behavior is provided, all in a closed, analytical way. Finally, the physical actuator limits are taken into account and never exceeded, and the discrete nature of the devices normally used for SMC implementation is incorporated throughout. Two examples are studied to portray the proposal’s advantages.  相似文献   

6.
This paper investigates an observer-based sliding mode control (SMC)) for connected vehicles under denial-of-service attacks. The attacks refer to interrupting communication channels between vehicles. Firstly, a reduced order observer is used to estimate the relative acceleration between neighbor vehicles, and a switching communication topology is introduced to model the attack. Then, an observer based sliding mode controller is proposed to achieve desired stability performance. Moreover, a quadratic cost performance is also defined and the cost upper bound is proved. Some sufficient conditions are provided such that the connected vehicles can achieve robust tracking performance, and input-to-state string stability is guaranteed under zero initial errors. Finally, numerical simulations are given to illustrate the validity of the designed controller.  相似文献   

7.
In this paper, an asynchronous sliding mode control design method based on the event-triggered strategy is proposed for the continuous stirred tank reactor (CSTR) under external disturbance. Firstly, with the purpose of appropriately modeling the multi-mode switching phenomenon in the CSTR caused by the fluctuation of temperature and concentration, the Markov process is applied. Secondly, the asynchronous switching characteristics are introduced to describe mismatch between the controller and the system, which caused by some factors such as signal transmission delay and packet dropout. In order to effectively estimate the system states that cannot be measured in real time, an observer based on the event-triggered strategy is proposed, which also can reduce the computational cost. In addition, a sliding mode controller is designed to ensure the dynamic stability and the sliding dynamics is reachable in a finite time. Finally, the effectiveness of the proposed method is verified by simulation experiments.  相似文献   

8.
The substitution of the original switches by a full bridge in a Non-Inverting Buck-Boost converter results in an inverter capable of carrying out step-down and step-up tasks as well under sliding mode control. The control law is implemented by means of the Zero Average Dynamics algorithm, which provides a fixed frequency operation and guarantees null error in each switching period, thus achieving a highly accurate tracking of periodic reference profiles. Furthermore, semi-infinite programming techniques are used to reduce power losses and, at the same time, prevent undesirable effects of control action saturation. The performance of the inverter is ensured to be robust in the face of bounded nonlinear and resistive loads. Realistic simulation results obtained with PSIMR software validate the proposed schemes.  相似文献   

9.
This paper deals with the load frequency control problem of multi-area power system with doubly-fed-induction-generator-based wind farm. An area-based event-triggered (ET) sliding mode control scheme is proposed to restore the nominal frequency by transmitting less information. The main feature of area-based ET scheme is that each area will transmit its states information to the controller independently via its own triggering mechanism. By flexibly selecting triggering thresholds, the area-based ET scheme can meet the unbalanced network resources among different areas. Meanwhile, the designed sliding mode controller can effectively suppress the fast fluctuation resulting from load and wind generation to achieve frequency restoration and maintain the tie-line power at its scheduled value. The optimization algorithm on the sufficient conditions is given. Finally, the proposed control scheme is illustrated via a three-area power system and IEEE 39-bus system.  相似文献   

10.
This article is dedicated to the issue of asynchronous adaptive observer-based sliding mode control for a class of nonlinear stochastic switching systems with Markovian switching. The system under examination is subject to matched uncertainties, external disturbances, and quantized outputs and is described by a TS fuzzy stochastic switching model with a Markovian process. A quantized sliding mode observer is designed, as are two modes-dependent fuzzy switching surfaces for the error and estimated systems, based on a mode dependent logarithmic quantizer. The Lyapunov approach is employed to establish sufficient conditions for sliding mode dynamics to be robust mean square stable with extended dissipativity. Moreover, with the decoupling matrix procedure, a new linear matrix inequality-based criterion is investigated to synthesize the controller and observer gains. The adaptive control technique is used to synthesize asynchronous sliding mode controllers for error and SMO systems, respectively, so as to ensure that the pre-designed sliding surfaces can be reached, and the closed-loop system can perform robustly despite uncertainties and signal quantization error.Finally, simulation results on a one-link arm robot system are provided to show potential applications as well as validate the effectiveness of the proposed scheme.  相似文献   

11.
In this paper, a sliding mode controller (SMC) is proposed for control of a wheeled inverted pendulum (WIP) system, which consists of a pendulum and two wheels in parallel. The control objective is to use only one actuator to perform setpoint control of the wheels while balance the pendulum around the upright position, which is an unstable equilibrium. When designing the SMC for the WIP system, various uncertainties are taken into consideration, including matched uncertainties such as the joint friction, and unmatched uncertainties such as the ground friction, payload variation, or road slope. The SMC proposed is capable of handling system uncertainties and applicable to general underactuated systems with or without input coupling. For switching surface design, the selection of the switching surface coefficients is in general a sophisticated design issue because those coefficients are nonaffine in the sliding manifold. In this work, the switching surface design is transformed into a linear controller design, which is simple and systematic. By virtue of the systematic design, various linear control techniques, such as linear quadratic regulator (LQR) or linear matrix inequality (LMI), can be incorporated in the switching surface design to achieve optimality or robustness for the sliding manifold. To further improve the WIP responses, the design of reference signals is addressed. The reference position for the pendulum is adjusted according to the actual equilibrium of the pendulum, which depends on the size of the friction and slope angle of the traveling surface. A smooth reference trajectory for the setpoint of the wheel is applied to avoid abrupt jumps in the system responses, meanwhile the reaching time of the switching surface can be reduced. The effectiveness of the SMC is validated using intensive simulations and experiment testings.  相似文献   

12.
This paper investigates the design problem of asynchronous output feedback controller via sliding mode for a class of discrete-time fuzzy Markovian jump systems. Considering the non-synchronization phenomenon between the Markovian jump systems and the sliding controller, an asynchronous control method with a stochastic variable is adopted to describe the connections of the systems and controller. On the other hand, not full of states are accessible for the controller since it is impossible or very expensive to estimate all of states, while the output information can be acquired to the controller all the time. Based on the above aspects, the asynchronous output feedback controller via sliding mode for fuzzy Markovian jump systems is investigated to ensure the sliding mode dynamics to be stochastically stable, besides, several sufficient conditions are given to find a set of feasible solutions of the controller parameters. The asynchronous sliding mode control law is synthesized to guarantee the reachability of the trajectories of the closed-loop systems. Finally, a simulation example is to verify the effectiveness of the control strategy.  相似文献   

13.
This study focuses on the control of islanded photovoltaic (PV) microgrid and design of a controller for PV system. Because the system operates in islanded mode, the reference voltage and frequency of AC bus are provided by the energy storage system. We mainly designed the controller for PV system in this study, and the control objective is to control the DC bus voltage and output current of PV system. First, a mathematical model of the PV system was set up. In the design of PV system controller, command-filtered backstepping control method was used to construct the virtual controller, and the final controller was designed by using sliding mode control. Considering the uncertainty of circuit parameters in the mathematical model and the unmodeled part of PV system, we have integrated adaptive control in the controller to achieve the on-line identification of component parameters of PV system. Moreover, fuzzy control was used to approximate the unmodeled part of the system. In addition, the projection operator guarantees the boundedness of adaptive estimation. Finally, the control effect of designed controller was verified by MATLAB/Simulink software. By comparing with the control results of proportion-integral (PI) and other controllers, the advanced design of controller was verified.  相似文献   

14.
Conventional direct torque control (DTC) suffers from large torque ripple and nonconstant switching frequency, which are caused by the hysteresis band amplitude and the motor speed. Many methods have been proposed to tackle these problems. However, these methods are usually complicated and parameter dependent. A novel DTC method for brushless DC motors based on duty ratio control is proposed to reduce torque ripple and maintain a constant switching frequency. During each switching period, an active voltage vector and a zero voltage vector are applied. A simple and effective method implemented to calculate the duty ratio relies only on the torque error, reducing the parameter dependence. The proposed method has the advantages of conventional DTC and effectively reduces torque ripple, which improves the performance of conventional DTC. Simulation and experimental results are given to confirm the method’s validity.  相似文献   

15.
This paper addresses the design of a sliding mode based extremum-seeking controller for a class of single-input–single-output (SISO) uncertain nonlinear systems with unmatched and state-dependent strong nonlinearities. We demonstrate that it is possible to achieve an arbitrarily small neighborhood of the desired optimal point using only output-feedback. The key idea is the combination of a periodic switching function with a norm state observer. As an important advantage, we show that the proposed scheme achieves extremum-seeking for all initial conditions, i.e., the real-time optimization algorithm has global convergence properties. An application to a simple nonderivative optimizer illustrates the viability of the proposed approach.  相似文献   

16.
Gas flow has fractional order dynamics; therefore, it is reasonable to assume that the pneumatic systems with a proportional valve to regulate gas flow have fractional order dynamics as well. There is a hypothesis that the fractional order control has better control performance for this inherent fractional order system, although the model used for fractional controller design is integer order. To test this hypothesis, a fractional order sliding mode controller is proposed to control the pneumatic position servo system, which is based on the exponential reaching law. In this method, the fractional order derivative is introduced into the sliding mode surface. The stability of the controller is proven using Lyapunov theorem. Since the pressure sensor is not required, the control system configuration is simple and inexpensive. The experimental results presented indicate the proposed method has better control performance than the fractional order proportional integral derivative (FPID) controller and some conventional integral order control methods. Points to be noticed here are that the fractional order sliding mode control is superior to the integral order sliding mode counterpart, and the FPID is superior to the corresponding integral order PID, both with optimal parameters. Among all the methods compared, the proposed method achieves the highest tracking accuracy. Moreover, the proposed controller has less chattering in the manipulated variable, the energy consumption of the controller is therefore substantially reduced.  相似文献   

17.
This paper investigates sliding mode control of stochastic singular Markovian jump systems with nonlinearity. The unmatched nonlinearity satisfies one-sided Lipschitz condition and quadratically inner-boundedness. In term of a new technical variable transformation, sufficient conditions are developed for nonlinear stochastic singular Markovian jump systems constrained on sliding manifold to guarantee stochastic admissibility and uniqueness of solution based on implicit function theorem. The sliding mode control law by which the trajectories of system can be compelled to the predefined sliding surface in finite time no matter what initial state value is, is synthesized. The derivative singular matrix is fully considered in the whole design process such that the derived conditions can be checked easily.The technical treatment of the nonlinear matrix term avoids the classification discussion of sliding mode controller design. Convex optimization problems subject to linear matrix inequalities are formulated to optimize the desired indexes of interest. Finally, the effectiveness of the proposed approach is illustrated by a numerical example and a practical example.  相似文献   

18.
Previously proposed adaptive fuzzy sliding mode control (AFSMC) and adaptive fuzzy sliding mode observer (AFSMO) methods are mixed and extended for the case of affine systems in which the input gain matrix is state-dependent, non-diagonal and non-positive definite. The proposed Extended AFSMCO (E-AFSMCO) method is then applied for position control of a Stewart Manipulator (SM), whose parameters are strongly state-dependent and complex and not suitable for practical control purposes. A robust observer-based control method which can work with a simplified model of the plant, and at the same time can preserve the stability and performance of the overall complex system is of great need. In this study, the SM dynamic model is simplified by removing the dynamic effects of the legs and the neglected terms are considered as un-modeled dynamics, for which the upper bound of the uncertainty is progressively estimated using the proposed adaptation rules. The final controller is comprised of a fuzzy controller in parallel with a robust switching controller. The second Lyapunov theorem is used to prove the closed-loop asymptotic stability. The proposed E-AFSMCO method is verified numerically and experimentally, depicting the effectiveness of the method for real-time industrial applications.  相似文献   

19.
In this article, the fault-tolerant control is investigated for the spacecraft attitude control system described by a linearized model with Markovian switching. First, the evolution of sudden failures of the spacecraft’s actuators is described by a Markov process. Then, the mathematical model of the spacecraft attitude control system with the Markov jump characteristic fault is established. Taking the uncertainty of the system model and external interference into consideration, a fault-tolerant control scheme is proposed for the established spacecraft attitude control system with the Markov jump characteristic fault by using the sliding mode control technique. Compared with some existing sliding mode controller design methods, the proposed method requires a less total number of LMIs to be solved. The stability and reachability of the resulting closed-loop system under the presented sliding mode control scheme are proven by applying the Lyapunov stability theory. Finally, some simulation results are provided to show the effectiveness and advantages of the proposed control method for spacecraft attitude control.  相似文献   

20.
In this paper, a new reaching law based sliding mode control strategy for discrete time systems is introduced. Contrary to most existing approaches, the new strategy uses a sliding variable with relative degree two. It is demonstrated that the new reaching law drives the sliding variable to a narrower quasi-sliding mode band than its relative degree one equivalent, while simultaneously ensuring the desired dynamic properties of the system. Furthermore, it is shown that the smaller quasi-sliding mode band width is reflected in reduced magnitude of all state variables in the sliding mode.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号