首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract

Knee functional disorders are one of the most common lower extremity non-traumatic injuries reported by cyclists. Incorrect bicycle configuration may predispose cyclist to injury but the evidence of an effect of saddle setback on knee pain remains inconclusive. The aim of this study was to determine the effect of saddle setback on knee joint forces during pedalling using a musculoskeletal modelling approach. Ten cyclists were assessed under three saddle setback conditions (range of changes in saddle position ~6 cm) while pedalling at a steady power output of 200 W and cadence of 90 rpm. A cycling musculoskeletal model was developed and knee joint forces were estimated using an inverse dynamics method associated with a static optimisation procedure. Our results indicate that moving the saddle forwards was not associated with an increase of patellofemoral joint forces. On the contrary, the tibiofemoral mean and peak compression force were 14 and 15% higher in the Backward than in the Forward condition, respectively. The peak compression force was related to neither pedal force nor quadriceps muscle force but coincided with the eccentric contraction of knee flexor muscles. These findings should benefit bike fitting practitioners and coaches in the design of specific training/rehabilitation protocols.  相似文献   

2.
ABSTRACT

The main purpose of this study was to assess the acute effects of small changes in crank length (assumable by competitive cyclists) on metabolic cost and pedalling technique during submaximal cycling. Twelve amateur road cyclists performed three sets of submaximal pedalling (150, 200 and 250 W) at a constant cadence (91.3 ± 0.8 rpm) in a randomised order with three commonly used crank lengths, preferred (172.5–175 mm), +5 mm and ?5 mm. Energy cost of pedalling, kinetic and kinematic variables were simultaneously registered. Changes in crank length had no significant effect on heart rate (144 ± 13, 145 ± 12 and 145 ± 13 bpm, respectively) and gross efficiency (GE) (20.4 ± 2.1, 20.1 ± 2.2 and 20.3 ± 2.4%, respectively). A longer crank induced a significant (P < 0.05) reduction of positive impulse proportion (PIP) (0.9–1.9%) due to a greater maximum (1.0–2.3 N · m) and minimum torque (1.0–2.2 N · m). At the same time, the maximum flexion and range of motion of the hip and knee joints were significantly increased (1.8–3.4° and P < 0.05), whereas the ankle joint was not affected. In conclusion, the biomechanical changes due to a longer crank did not alter the metabolic cost of pedalling, although they could have long-term adverse effects. Therefore, in case of doubt between two lengths, the shorter one might be recommended.  相似文献   

3.
The effective force applied on the crank, the index of pedalling effectiveness, and the economy of movement at 60, 75, 90, and 105 rev/min cadences were examined in nine cyclists and eight triathletes. Tests were performed on two days. Maximal oxygen uptake was measured and the second ventilatory threshold was estimated on day 1 using a stationary bicycle. On day 2, the four different cadences were tested at about 5% below the second ventilatory threshold. A strain gauge instrumented clip-less pedal mounted on the bicycle enabled us to measure the normal and tangential forces exerted on the pedal, while the pedal and crank angles were monitored with the aid of a video system. Based on this information, the effective force and the index of pedalling effectiveness were calculated. Cyclists produced significantly more effective force and a higher index of pedalling effectiveness at 60 and 75 rev/min and were significantly more economic at all cadences than triathletes. The significant and positive correlation between effective force and economy at all cadences suggests that improvement of the effective force would reflect on economy.  相似文献   

4.
Effective force and economy of triathletes and cyclists   总被引：1，自引：0，他引：1  
The effective force applied on the crank, the index of pedalling effectiveness, and the economy of movement at 60, 75, 90, and 105 rev/min cadences were examined in nine cyclists and eight triathletes. Tests were performed on two days. Maximal oxygen uptake was measured and the second ventilatory threshold was estimated on day 1 using a stationary bicycle. On day 2, the four different cadences were tested at about 5% below the second ventilatory threshold. A strain gauge instrumented clip-less pedal mounted on the bicycle enabled us to measure the normal and tangential forces exerted on the pedal, while the pedal and crank angles were monitored with the aid of a video system. Based on this information, the effective force and the index of pedalling effectiveness were calculated. Cyclists produced significantly more effective force and a higher index of pedalling effectiveness at 60 and 75 rev/min and were significantly more economic at all cadences than triathletes. The significant and positive correlation between effective force and economy at all cadences suggests that improvement of the effective force would reflect on economy.  相似文献   

5.
Abstract

The effects of saddle height on pedal forces and joint kinetics (e.g. mechanical work) are unclear. Therefore, we assessed the effects of saddle height on pedal forces, joint mechanical work and kinematics in 12 cyclists and 12 triathletes. Four sub-maximal 2-min cycling trials (3.4 W/kg and 90 rpm) were conducted using preferred, low and high saddle heights (±10° knee flexion at 6 o'clock crank position from the individual preferred height) and an advocated optimal saddle height (25° knee flexion at 6 o'clock crank position). Right pedal forces and lower limb kinematics were compared using effect sizes (ES). Increases in saddle height (5% of preferred height, ES=4.6) resulted in large increases in index of effectiveness (7%, ES=1.2) at the optimal compared to the preferred saddle height for cyclists. Greater knee (11–15%, ES=1.6) and smaller hip (6–8%, ES=1.7) angles were observed at the low (cyclists and triathletes) and preferred (triathletes only) saddle heights compared to high and optimal saddle heights. Smaller hip angle (5%, ES=1.0) and greater hip range of motion (9%, ES=1.0) were observed at the preferred saddle height for triathletes compared to cyclists. Changes in saddle height up to 5% of preferred saddle height for cyclists and 7% for triathletes affected hip and knee angles but not joint mechanical work. Cyclists and triathletes would opt for saddle heights <5 and <7%, respectively, within a range of their existing saddle height.  相似文献   

6.
ABSTRACT

Previous studies have been limited to describe asymmetries during pedalling and suggest possible repercussion on performance and/or injury risks. However, few studies have presented strategies to mitigate asymmetries. The purpose of this study was to assess the effectiveness of a pedalling retraining intervention to reduce bilateral pedal force asymmetries. Twenty cyclists were assessed and 10 enrolled in a pedalling retraining method receiving visual and verbal feedback of pedal forces. The asymmetry index was computed for comparison of bilateral peak pedal forces and used during retraining (12 trials at 70% of peak power). Significantly larger asymmetry was observed for asymmetrical cyclists at the first three trials (P < 0.01 and ES = 1.39), which was reduced when post-retraining was compared to measures from symmetrical cyclists (P = 0.69 and ES = 0.18). Cyclists with larger asymmetry (>20%) in bilateral pedal forces reduce their asymmetries using sessions of pedalling retraining and achieve asymmetry indices similar to symmetrical cyclists.  相似文献   

7.
This study tested the hypothesis that ischemic preconditioning (IPC) would increase critical power (CP) during a 3 minute all-out cycling test. Twelve males completed two 3 minute all-out cycling tests, in a crossover design, separated by 7 days. These tests were preceded by IPC (4 x 5 minute intervals at 220 mmHg bilateral leg occlusion) or SHAM treatment (4 x 5 minute intervals at 20 mmHg bilateral leg occlusion). CP was calculated as the mean power output during the final 30 s of the 3 minute test with W′ taken as the total work done above CP. Muscle oxygenation was measured throughout the exercise period. There was a 15.3 ± 0.3% decrease in muscle oxygenation (TSI; [Tissue saturation index]) during the IPC stimulus, relative to SHAM. CP was significantly increased (241 ± 65 W vs. 234 ± 67 W), whereas W′ (18.4 ± 3.8 vs 17.9 ± 3.7 kJ) and total work done (TWD) were not different (61.1 ± 12.7 vs 60.8 ± 12.7 kJ), between the IPC and SHAM trials. IPC enhanced CP during a 3 minute all-out cycling test without impacting W′ or TWD. The improved CP after IPC might contribute towards the effect of IPC on endurance performance.  相似文献   

8.
  相似文献   

9.
Improved understanding of mobility performance in wheelchair basketball is required to increase game performance. The aim of this study was to quantify the wheelchair-athlete activities of players in different field positions and of different playing standard during wheelchair basketball matches. From video analysis, absolute and relative duration and frequency of wheelchair movements and athlete control options were examined in 27 national standard and 29 international standard players during entire wheelchair basketball matches. Between-group factorial analysis of variances identified that national players drove more forward (42.6 ± 6.8 vs. 35.4 ± 3.7%; effect size Cohen’s d (ES) = 1.48) and started more often driving forward (33.9 ± 2.6 vs. 31.8 ± 2.8; ES = 0.77) during a match while the mean activity duration for a single driving forward activity was longer (4.3 ± 0.9 vs. 3.7 ± 0.6 s; ES = 0.75) than for international players. Furthermore, national players performed fewer rotational movements (21.8 ± 4.0 vs. 28.9 ± 7.8%; ES = –1.30) and started less often with the rotational movements (35.0 ± 3.6 vs. 40.5 ± 5.5; ES = –1.21) while the mean activity duration for a single rotation activity was shorter (2.1 ± 0.3 vs. 2.3 ± 0.3 s; ES = –0.67) than for international players. Differences in mobility performance among guard, forward and centre players were minimal. The results should help wheelchair basketball coaches specify wheelchair-handling training techniques and means to optimise wheelchair-athlete configurations.  相似文献   

10.
Non-circular chainrings alter the crank velocity profile over a pedalling cycle. The aim of this study was to investigate the effect of this altered crank velocity profile on the aerobic performance compared to a circular chainring (CC). Ten male non-cyclists performed two incremental maximal tests at 80?rpm on a cycle ergometer: one with a circular (Shimano) and the other with a non-circular chainring Osymetric® (Somovedi), at least 50?h apart. Each test started with a workload of 100?W lasting 3?min. During the first 12?min, the workload was increased by 30?W every 3?min. Thereafter, the workload was increased by 30?W every 2?min until exhaustion. The power output, the intra-cycle crank angular velocity and the physiological parameters were monitored continuously, averaged over the last 30?s of each increment and at exhaustion, and compared for the two chainrings. Results showed a higher maximal aerobic power attained with the non-circular chainring (362.6?±?37.9 vs. 338.8?±?32.6?W, p?相似文献   

11.
Abstract

The study investigated the absolute and relative (% maximal) physiological demands of constant power output at three pedal rates chosen to incorporate the range used by racing cyclists. Following the assessment of maximal exercise capabilities utilizing a recently developed racing cycle ergometry system, ten highly trained racing cyclists undertook a randomized sequence of work bouts at low (70.0 ± 1.1), medium (94.8 ± 0.8) and high (126.5 ± 1.1) pedal rates per minute at constant power output under an unloaded (free wheel) condition and under a loaded (196.2 ± 8.0 W) condition which demanded approximately 75% VO2 max. In both the unloaded and loaded conditions absolute cardiorespiratory demands of work at the highest pedal rate were significantly higher than those at the low and medium pedal rates (P<0.05). Similarly, the relative (% max) cardiorespiratory demands of unloaded work at the highest pedalling rate were significantly greater that at low and medium pedal rates (P < 0.05). There were clear, but nonsignificant trends of elevated relative cardiorespiratory demands during loaded work at the highest pedal rate, compared with low and medium pedal rates. Furthermore, net muscular efficiency demonstrated a significant decline (P<0.01) at the highest pedalling rate (21.2%) compared with the medium (24.0%) and low (25.6%) pedalling rates, confirming that metabolic economy of constant power output declined with increased pedalling rate under simulated racing cycling conditions.  相似文献   

12.
Abstract

The main aim of this study was to determine whether the use of an imposed or freely chosen crank rate would influence submaximal and peak physiological responses during arm crank ergometry. Fifteen physically active men participated in the study. Their mean age, height, and body mass were 25.9 (s = 6.2) years, 1.80 (s = 0.10) m, and 78.4 (s = 6.1) kg, respectively. The participants performed two incremental peak oxygen consumption ([Vdot]O2peak) tests using an electronically braked ergometer. One test was performed using an imposed crank rate of 80 rev · min?1, whereas in the other the participants used spontaneously chosen crank rates. The order in which the tests were performed was randomized, and they were separated by at least 2 days. Respiratory data were collected using an on-line gas analysis system, and fingertip capillary blood samples (～20 μl) were collected for the determination of blood lactate concentration. Heart rate was also recorded throughout the tests. Time to exhaustion was measured and peak aerobic power calculated. Submaximal data were analysed using separate two-way repeated-measures analyses of variance, while differences in peak values were analysed using separate paired t-tests. Variations in spontaneously chosen crank rate were assessed using a one-way analysis of variance with repeated measures. Agreement between the crank rate strategies for the assessment of peak values was examined by calculating intra-class correlation coefficients (ICC) and 95% limits of agreement (95% LoA). While considerable between-participant variations in spontaneously chosen crank rate were observed, the mean value was not different (P > 0.05) from the imposed crank rate of 80 rev · min?1 at any point. No differences (P > 0.05) were observed for submaximal data between crank strategies. Furthermore, mean peak minute power [158 (s = 20) vs. 158 (s = 18) W], time to exhaustion [739 (s = 118) vs. 727 (s = 111) s], and [Vdot]O2peak[3.09 (s = 0.38) vs. 3.04 (s = 0.34) l · min?1] were similar for the imposed and spontaneously chosen crank rates, respectively. However, the agreement for the assessment of [Vdot]O2peak (ICC = 0.78; 95% LoA = 0.04 ± 0.50 l · min?1) between the cranking strategies was considered unacceptable. Our results suggest that either an imposed or spontaneously chosen crank rate strategy can be used to examine physiological responses during arm crank ergometry, although it is recommended that the two crank strategies should not be used interchangeably.  相似文献   

13.
Abstract

The aim of the study was to assess the relationship between performance-based and laboratory tests for muscular strength and power assessment in older women. Thirty-two women aged 68.8 ± 2.8 years were recruited. All participants were asessed for: (a) two performance-based tests – the box-stepping test (mean 296 ± 51 J) and two-revolution maximum test (mean 7.1 ± 2 kg) performed while pedalling on a cycle ergometer; and (b) muscular function tests – maximal instantaneous peak power jumping on a force platform (mean 1528 ± 279 W); maximal voluntary contraction (MVC) during knee extension (mean 601 ± 571 N) and leg press (mean 626 ± 126 N), and leg press power (mean 483 ± 98 W) on a dynamometer. Using univariate analysis, performance-based tests were compared with laboratory muscle strength and power measurements. Muscle power correlated most strongly with the performance-based tests for both jumping and leg press power (r-values between 0.67 and 0.75; P < 0.01). The correlation with muscle strength measures ranged between 0.48 and 0.61 (P < 0.01). The proposed tests may have particular relevance in geriatric and rehabilitation environments as they represent an easy, practical, and inexpensive alternative for the assessment of muscular strength and power.  相似文献   

14.
Abstract

The purpose of this study was to compare submaximal physiological responses and indices of mechanical efficiency between asynchronous and synchronous arm ergometry. Thirteen wheelchair-dependent trained athletes performed eight steady-state incremental bouts of exercise (0 to 140 W), each lasting 4 min, using synchronous and asynchronous arm-cranking strategies. Physiological measures included oxygen uptake ([Vdot]O2), heart rate, and blood lactate concentration. The power outputs corresponding to fixed whole blood lactate concentrations of 2.0 to 4.0 mmol · l?1 were calculated using linear interpolation. Mechanical efficiency indices – gross efficiency, net efficiency, and work efficiency – were also calculated. An analysis of variance with repeated measures was applied to determine the effect of crank mode on the physiological parameters. Oxygen uptake was on average 10% lower (P < 0.01), and both net efficiency (P < 0.01) and gross efficiency (P < 0.01) were higher, during the asynchronous strategy at both 60 and 80 W (gross efficiency: 16.9 ± 2.0% vs. 14.7 ± 2.4% and 17.5 ± 1.8% vs. 15.9 ± 2.6% at 60 and 80 W respectively). There were no differences in heart rate, blood lactate concentration or power output at either of the blood lactate reference points between the asynchronous and synchronous strategies (P > 0.05). In conclusion, test specificity is an important consideration. If a synchronous strategy is to be adopted, it is likely to result in lower efficiency than an asynchronous strategy. The exercise testing scenario may help dictate which method is ultimately chosen.  相似文献   

15.
Limited evidence showed that higher workload increases knee forces without effects from changes in pedalling cadence. This study assessed the effects of workload and cadence on patellofemoral and tibiofemoral joint forces using a new model. Right pedal force and lower limb joint kinematics were acquired for 12 competitive cyclists at two levels of workload (maximal and second ventilatory threshold) at 90 and 70 rpm of pedalling cadence. The maximal workload showed 18% larger peak patellofemoral compressive force PFC (large effect size, ES) than the second ventilatory threshold workload (90 rpm). In the meantime, the 90-rpm second ventilatory threshold was followed by a 29% smaller PFC force (large ES) than the 70-rpm condition. Normal and anterior tibiofemoral compressive forces were not largely affected by changes in workload or pedalling cadence. Compared to those of previous studies, knee forces normalized by workload were larger for patellofemoral (mean = 19 N/J; difference to other studies = 20–45%), tibiofemoral compressive (7.4 N/J; 20–572%), and tibiofemoral anterior (0.5 N/J; 60–200%) forces. Differences in model design and testing conditions (such as workload and pedalling cadence) may affect prediction of knee joint forces.  相似文献   

16.
Although high levels of sitting time are adversely related to health, it is unclear whether moving from sitting to standing provides a sufficient stimulus to elicit benefits upon markers of chronic low-grade inflammation in a population at high risk of type 2 diabetes (T2DM). Three hundred and seventy two participants (age = 66.8 ± 7.5years; body mass index (BMI) = 31.7 ± 5.5kg/m2; Male = 61%) were included. Sitting, standing and stepping was determined using the activPAL3TM device. Linear regression modelling employing an isotemporal substitution approach was used to quantify the association of theoretically substituting 60 minutes of sitting per day for standing or stepping on interleukin-6 (IL-6), C-reactive protein (CRP) and leptin. Reallocating 60 minutes of sitting time per day for standing was associated with a ?4% (95% CI ?7%, ?1%) reduction in IL-6 (p = 0.048). Reallocating 60 minutes of sitting time for light stepping was also associated with lower IL-6 levels (?28% (?46%, ?4%; p = 0.025)). Substituting sitting for moderate-to-vigorous (MVPA) stepping was associated with lower CRP (?41% (?75%, ?8%; p = 0.032)), leptin (?24% (?34%, ?12%; p ≤ 0.001)) and IL-6 (?16% (?28%, 10%; p = 0.036). Theoretically replacing 60 minutes of sitting per day with an equal amount of either standing or stepping yields beneficial associations upon markers of chronic-low grade inflammation.  相似文献   

17.
The aim of this study was to investigate the effectiveness of a caffeine-containing energy drink to enhance physical and match performance in elite badminton players. Sixteen male and elite badminton players (25.4 ± 7.3 year; 71.8 ± 7.9 kg) participated in a double-blind, placebo-controlled and randomised experiment. On two different sessions, badminton players ingested 3 mg of caffeine per kg of body mass in the form of an energy drink or the same drink without caffeine (placebo). After 60 min, participants performed the following tests: handgrip maximal force production, smash jump without and with shuttlecock, squat jump, countermovement jump and the agility T-test. Later, a 45-min simulated badminton match was played. Players’ number of impacts and heart rate was measured during the match. The ingestion of the caffeinated energy drink increased squat jump height (34.5 ± 4.7 vs. 36.4 ± 4.3 cm; P < 0.05), squat jump peak power (P < 0.05), countermovement jump height (37.7 ± 4.5 vs. 39.5 ± 5.1 cm; P < 0.05) and countermovement jump peak power (P < 0.05). In addition, an increased number of total impacts was found during the badminton match (7395 ± 1594 vs. 7707 ± 2033 impacts; P < 0.05). In conclusion, the results show that the use of caffeine-containing energy drink may be an effective nutritional aid to increase jump performance and activity patterns during game in elite badminton players.  相似文献   

18.
The aim of the study was to evaluate, by an electromyographic (EMG) and mechanomyographic (MMG) combined approach, whether years of specific climbing activity induced neuromuscular changes towards performances related to a functional prevalence of fast resistant or fast fatigable motor units. For this purpose, after the maximum voluntary contraction (MVC) assessment, 11 elite climbers and 10 controls performed an exhaustive handgrip isometric effort at 80% MVC. Force, EMG and MMG signals were recorded from the finger flexor muscles during contraction. Time and frequency domain analysis of EMG and MMG signals was performed. In climbers: (i) MVC was higher (762 ± 34 vs 512 ± 57 N; effect size: 1.64; confidence interval: 0.65–2.63; P < 0.05); (ii) endurance time at 80% MVC was 43% longer (34.2 ± 3.7 vs 22.3 ± 1.5 s; effect size: 1.21; confidence interval: 0.28–2.14; P < 0.05); (iii) force accuracy and stability were greater during contraction (P < 0.05); (iv) EMG and MMG parameters were higher throughout the entire isometric effort (P < 0.05). Collectively, force, EMG and MMG combined analysis revealed that several years of specific climbing activity addressed the motor control system to adopt muscle activation strategies based on the functional prevalence of fast resistant motor units.  相似文献   

19.
The purpose of this study was to compare the pedalling technique in road cyclists of different competitive levels. Eleven professional, thirteen elite and fourteen club cyclists were assessed at the beginning of their competition season. Cyclists’ anthropometric characteristics and bike measurements were recorded. Three sets of pedalling (200, 250 and 300 W) on a cycle ergometer that simulated their habitual cycling posture were performed at a constant cadence (~90 rpm), while kinetic and kinematic variables were registered. The results showed no differences on the main anthropometric variables and bike measurements. Professional cyclists obtained higher positive impulse proportion (1.5–3.3% and P < 0.05), mainly due to a lower resistive torque during the upstroke (15.4–28.7% and P < 0.05). They also showed a higher ankle range of movement (ROM, 1.1–4.0° and P < 0.05). Significant correlations (P < 0.05) were found between the cyclists’ body mass and the kinetic variables of pedalling: positive impulse proportion (r = ?0.59 to ?0.61), minimum (r = ?0.59 to ?0.63) and maximum torques (r = 0.35–0.47). In conclusion, professional cyclists had better pedalling technique than elite and club cyclists, because they opted for enhancing pulling force at the recovery phase to sustain the same power output. This technique depended on cycling experience and level of expertise.  相似文献   

20.
Abstract

The purpose of this study was to assess the power output of field-based downhill mountain biking. Seventeen trained male downhill cyclists (age 27.1 ± 5.1 years) competing nationally performed two timed runs of a measured downhill course. An SRM powermeter was used to simultaneously record power, cadence, and speed. Values were sampled at 1-s intervals. Heart rates were recorded at 5-s intervals using a Polar S710 heart rate monitor. Peak and mean power output were 834 ± 129 W and 75 ± 26 W respectively. Mean power accounted for only 9% of peak values. Paradoxically, mean heart rate was 168 ± 9 beats · min?1 (89% of age-predicted maximum heart rate). Mean cadence (27 ± 5 rev · min?1) was significantly related to speed (r = 0.51; P < 0.01). Analysis revealed an average of 38 pedal actions per run, with average pedalling periods of 5 s. Power and cadence were not significantly related to run time or any other variable. Our results support the intermittent nature of downhill mountain biking. The poor relationships between power and run time and between cadence and run time suggest they are not essential pre-requisites to downhill mountain biking performance and indicate the importance of riding dynamics to overall performance.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号