共查询到20条相似文献，搜索用时 46 毫秒
1.
The Weibull distribution has been widely used in reliability fields. A mixed Weibull distribution represents a popu- lation that consists of several Weibull subpopulations. In this paper, a new approach which combines the least-squares method with Bayes’ theorem, takes advantage of the parameter estimation for single Weibull distribution is developed to estimate the pa- rameters of each subpopulation. The estimates given by this paper also satisfy the maximum likelihood equation. The estimates of the failure rate of the mixed Weibull population are given. An actual test data is computed by using the proposed method. The Kolmogorov-Smirnov goodness-of-fit test turns out that the proposed method yields more accurate result. 相似文献
2.
In freeform surface modelling, developable surfaces have much application value. But, in 3D space, there is not always a regular developable surface which interpolates the given boundary of an arbitrary piecewise smooth closed curve. In this paper, tensor product Bézier surfaces interpolating the closed curves are determined and the resulting surface is a minimum of the functional defined by the L2-integral norm of the Gaussian curvature. The Gaussian curvature of the surfaces is minimized by the method of solving nonlinear optimization problems. An improved approach trust-region form method is proposed. A simple application example is also given. 相似文献
3.
Fernandes E Pacheco A Penha-Gonçalves C 《Journal of Zhejiang University. Science. B》2007,8(11):792-801
In standard interval mapping (IM) of quantitative trait loci (QTL), the QTL effect is described by a normal mixture model. When this assumption of normality is violated, the most commonly adopted strategy is to use the previous model after data transformation. However, an appropriate transformation may not exist or may be difficult to find. Also this approach can raise interpretation issues. An interesting alternative is to consider a skew-normal mixture model in standard IM, and the resulting method is here denoted as skew-normal IM. This flexible model that includes the usual symmetric normal distribution as a special case is important, allowing continuous variation from normality to non-normality. In this paper we briefly introduce the main peculiarities of the skew-normal distribution. The maximum likelihood estimates of parameters of the skew-normal distribution are obtained by the expectation-maximization (EM) algorithm. The proposed model is illustrated with real data from an intercross experiment that shows a significant departure from the normality assumption. The performance of the skew-normal IM is assessed via stochastic simulation. The results indicate that the skew-normal IM has higher power for QTL detection and better precision of QTL location as compared to standard IM and nonparametric IM. 相似文献
4.
A three-step damage identification method based on dynamic characteristics is proposed to improve the structure reliability and security and avoid serious accident. In the proposed method, the frequency and difference of modal curvature （DMC） are used as damage indexes. Firstly, the detection of the occurrence of damage is addressed by the frequency or the square of frequency change. Then the damage location inside the structure is measured by the DMC. Finally, with the stiffness reduction rate as a damage factor, the amount of damage is estimated by the optimization algorithm. The three-step damage identification method has been validated by conducting the simulation on a cantilever beam and the shaking table test on a submerged bridge. The results show that the method proposed in this paper can effectively solve the damage identification problem in theory and engineering practice. 相似文献
5.
In developing distributed systems, conformance testing is required to determine whether an implementation under test （IUT） conforms to its specification. With distributed test architectures involving multiple remote testers, testing approaches may become more complicated because of issues known as controllability and observability problems. Based on a finite state machine （FSM） representation of the system＇s specification, this paper proposes a new method to generate a test sequence utilizing multiple UIO sequences. The method is essentially guided by the way of minimizing the use of external coordination messages and input/output operations. Experiments are given to evaluate the proposed method. 相似文献
6.
Image reconstruction in elecrical impedance tomography(EIT)is a highly ill-posed inverse problem,Regularization techniques must be used in order to solve the problem,In this paper,a new regularization method based on the spatial filtering theory is proposed.The new regularized reconstruction for EIT is independent of the estimation of impedance distribution,so it can be implemented more easily than the maxiumum a posteriori(MAP) method.The regularization level in our proposed method varies spatially so as to be suited to the correlation character of the object‘s impedance distribution.We implemented our regularization method with two dimensional computer simulations.The experimental results indicate that the quality of the reconstructed impedance images with the descibed regularization method based on spatial filtering theory is better than that with Tikhonov method. 相似文献
7.
A novel defected ground structure （DGS） for the microstrip line is proposed in this paper. The DGS lattice has more defect parameters so that it can provide better performance than the conventional dumbbell-shaped DGS. Selectivity is improved by 97.2% with a sharpness factor of 24.6%. The method is applied to the design of a low-pass filter to confirm validity of the proposed DGS. 相似文献
8.
Modeling of D-STATCOM in distribution systems load flow 总被引：1，自引：0，他引：1
HOSSEINI Mehdi SHAYANFAR Heidar Ali FOTUHI-FIRUZABAD Mahmud 《浙江大学学报(A卷英文版)》2007,8(10):1532-1542
This paper presents modeling of Distribution STATCOM (D-STATCOM) in load flow calculations for the steady- state voltage compensation. An accurate model for D-STATCOM is derived to use in load flow calculations. The rating of this device as well as the direction of required reactive power injection for voltage compensation in the desired value (1 p.u.) is de- rived and discussed analytically and mathematically by the phasor diagram method. Furthermore, an efficient method for node and line identification used in load flow calculations is presented. The validity of the proposed model is examined by using two standard distribution systems consisting of 33 and 69 nodes, respectively. The best location of D-STATCOM for under voltage problem mitigation approach in the distribution networks is determined. The results validate the proposed model for D- STATCOM in large distribution systems. 相似文献
9.
In this paper, a CMOS image sensor(CIS) is proposed, which can accomplish both decorrelation and entropy coding of image compression directly on the focal plane. The design is based on predictive coding for image decorrelation. The predictions are performed in analog domain by 2×2 pixel units. Both the prediction residuals and original pixel values are quantized and encoded in parallel. Since the residuals have a peak distribution around zero,the output codewords can be replaced by the valid part of the residuals' binary mode. The compressed bit stream is accessible directly at the output of CIS without extra disposition. Simulation results show that the proposed approach achieves a compression rate of 2. 2 and PSNR of 51 on different test images. 相似文献
10.
Many heuristic search methods exhibit a remarkable variability in the time required to solve some particular problem instances. Their cost distributions are often heavy-tailed. It has been demonstrated that, in most cases, rapid restart (RR) method can prominently suppress the heavy-tailed nature of the instances and improve computation efficiency. However, it is usually time-consuming to check whether an algorithm on a specific instance is heavy-tailed or not. Moreover, if the heavy-tailed distribution is confirmed and the RR method is relevant, an optimal RR threshold should be chosen to facilitate the RR mechanism. In this paper, an approximate approach is proposed to quickly check whether an algorithm on a specific instance is heavy-tailed or not. The method is realized by means of calculating the maximal Lyapunov exponent of its generic running trace. Then a statistical formula to estimate the optimal RR threshold is educed. The method is based on common nonparametric estimation, e.g. , Kernel estimation. Two heuristic methods are selected to verify our method. The experimental results are consistent with the theoretical consideration perfectly. 相似文献
11.
In this paper, a new method named as the gradually descent method was proposed to solve the discrete global optimization problem. With the aid of an auxiliary function, this method enables to convert the problem of finding one discrete minimizer of the objective function f to that of finding another at each cycle. The auxiliary function can ensure that a point, except a prescribed point, is not its integer stationary point if the value of objective function at the point is greater than the scalar which is chosen properly. This property leads to a better minimizer of f found more easily by some classical local search methods. The computational results show that this algorithm is quite efficient and reliable for solving nonlinear integer programming problems. 相似文献
12.
In this paper,the control of complex delayed networks with different nodes is proposed.Firstly,the stabilization of coupled networks with time delay is investigated.By constructing a Lyapunov function,a linear feedback controller design procedure for the networks is converted to the problem of solving a set of linear matrix inequalities.Then the results are extended to networks with both delayed dynamical nodes and delayed couplings.It is shown that the stabilization of complex networks is determined by the dynamics of each uncoupled node,coupling matrix and feedback gain matrix of networks.Two examples are simulated.In the first example,a network with 10 nodes consisting of Lorenz systems and systems proposed by Zhang in 2009 is given.It is found that the network states are divergent without control,and convergent under designed linear feedback controllers.In the second example,a larger network with 100 nodes consisting of delayed Chen systems and delayed Lorenz systems is given.The proposed method is also effective for large scale networks. 相似文献
13.
For reconstructing a freeform feature from point cloud, a deformation-based method is proposed in this paper. The freeform feature consists of a secondary surface and a blending surface. The secondary surface plays a role in substituting a local region of a given primary surface. The blending surface acts as a bridge to smoothly connect the unchanged region of the primary surface with the secondary surface. The secondary surface is generated by surface deformation subjected to line constraints, i.e., character lines and limiting lines, not designed by conventional methods. The lines are used to represent the underlying information of the freeform feature in point cloud, where the character lines depict the feature＇s shape, and the limiting lines determine its location and orientation. The configuration of the character lines and the extraction of the limiting lines are discussed in detail. The blending surface is designed by the traditional modeling method, whose intrinsic parameters are recovered from point cloud through a series of steps, namely, point cloud slicing, circle fitting and regression analysis. The proposed method is used not only to effectively and efficiently reconstruct the freeform feature, but also to modify it by manipulating the line constraints. Typical examples are given to verify our method. 相似文献
14.
Riemann surface with almost positive definite metric 总被引：1，自引：0，他引：1
陈志国 《浙江大学学报(A卷英文版)》2005,6(7):747-749
In this paper, we consider and resolve a geometric problem by using μ(z)-homeomorphic theory, which is the generalization of quasiconformal mappings. A sufficient condition is given such that a C1-two-real-dimensional connected orientable manifold with almost positive definite metric can be made into a Riemann surface by the method of isothermal coordinates. The result obtained here is actually a generalization of Chern's work in 1955. 相似文献
15.
The over-load protective relay is widely used for motor protection. The reliability of the over-load protective relay directly affects the safe running of a motor. The reliability testing and reliability analysis of the over-load protective relay is an important way to improve the reliability of products. In this paper, the reliability test method of the over-load protective relay is studied, and the reliability tests of the typical products are carried out on a reliability tester developed by authors. In terms of the testing results, the reliability analysis is finished. The failure reasons are found and the measures are put forward to improve the reliability of the products. 相似文献
16.
A modified Lindstedt-Poincaré(LP) method for obtaining the resonance periodic solutions of nonlinear non-autonomous vibration systems is proposed in this paper. In the modified method, nonlinear non-autonomous equations are converted into a group of linear ordinary differential equations by introducing a set of simple transformations.An approximate resonance solution for the original equation can then be obtained. The periodic solutions of primary, super-harmonic, sub-harmonic, zero-frequency and combination resonances can be solved effectively using the modified method. Some examples, such as damped cubic nonlinear systems under single and double frequency excitation,and damped quadratic nonlinear systems under double frequency excitation, are given to illustrate its convenience and effectiveness. Using the modified LP method, the first-order approximate solutions for each equation are obtained. By comparison, the modified method proposed in this paper produces the same results as the method of multiple scales. 相似文献
17.
A new method to detect multiple outliers in multivariate data is proposed. It is a combination of minimum subsets, resampling and self-organizing map (SOM) algorithm introduced by Kohonen,which provides a robust way with neural network. In this method, the number and organization of the neurons are selected by the characteristics of the spectra, e. g., the spectra data are often changed linearly with the concentration of the components and are often measured repeatedly, etc. So the spatial distribution of the neurons can be arranged by this characteristic. With this method, all the outliers in the spectra can be detected, which cannot be solved by the traditional method, and the speed of computation is higher than that of the traditional neural network method. The results of the simulation and the experiment show that this method is simple, effective, intuitionistic and all the outliers in the spectra can be detected in a short time. It is useful when associated with the regression model in the near infra-red research. 相似文献
18.
ZHO U Xin-hong 《美中教育评论》2007,4(7):31-37
The English cohesion theory proposed by Halliday and Hasan makes great contributions to the understanding of the coherence and cohesion of the English texts. It should be applicable in the teaching of English writing so as to improve the cohesion in the students＇ compositions. The present paper describes apractice of this order among non-major graduate students, and discusses its results. The conclusion is that teaching activities of this kind can indeed improve the cohesion in the students＇ compositions. Finally the paper raises a few concerning problems which remain to be further explored. 相似文献
19.
HAN Dong 《重庆大学学报(英文版)》2015,14(2):63-72
The method to design sliding-mode observers for systems with unknown inputs and measurement disturbances is presented in the paper. An augmented system is constructed by viewing the measurement disturbances as unknow inputs. For such an augmented system, the so-called observer matching condition is not satisfied. Based on the construction of auxiliary outputs, the observer matching condition may be satisfied. High-order sliding-mode differentiators are developed to obtain the estimates of those unmeasurable variables contained in the auxiliary output vector. Employing the estimate of auxiliary output vector, a sliding-mode observer is designed. The simulation results to a real model show that the proposed method is effective. 相似文献
20.
In this paper, a novel reconstruction technique based on level set method and algebraic reconstruction technique is proposed for multiphase flow computed tomography (CT) system. The curvature-driven noise reduction method is inserted into the conventional iteration procedure of algebraic reconstruction technique to improve the image quality and convergence speed with limited projection data. By evolving the image as a set of iso-intensity contours after each updation, the sufficient number of iterations for acceptable results is reduced by 80%-90%, while the image quality is enhanced obviously. Quantitative evaluation of image quality is given by using both relative image error and correlation coefficient. The resultant images can be utilized to detect flow regimes for monitoring industrial multiphase flow. Laboratory results demonstrate the feasibility of the proposed method. Phantoms of four typical flow regimes can be reconstructed from few-view projection data efficiently, and the corresponding image errors and correlation coefficients are acceptable for the cases tested in this paper. 相似文献