排序方式： 共有36条查询结果，搜索用时 78 毫秒
1.
利用光电直读光谱、光学显微镜与显微硬度计对某厂表面开裂液压机械的液压主轴的成分、组织进行了分析。结果表明,液压轴的原材料符合中国GB标准45钢的成分要求;经高频淬火、磨削后的液压轴的组织为磨削热作用产生的不同程度的回火组织;表面裂纹产生的原因是液压轴材质、热处理工艺及磨削工艺不当三方面综合作用的结果。液压轴材质存在网状铁素体并且未经热处理消除,降低了材质表面的强度;磨削工艺不当使表层产生不同程度的回火带和应力集中;材质缺陷与工艺不当综合作用导致液压轴表面产生裂纹。 相似文献
2.
Preparation and Characterization of M-Type Barium Ferrite Fibers via Aqueous Sol-Gel Process 总被引：1，自引：0，他引：1
BaFe12O19 fibers was prepared via an aqueous sol-gel process using Fe(OH)(HCOO)2 synthesized in laboratory and Ba(CH3COO)2 as the original materials and citrate as the chelate. The rheological behaviour of spinnable sol was characterized on rheometer, and the development of gel fibers to barium ferrite fibers was studied by IR, TG and XRD. Morphology observation of the fibers was given on SEM, and the diameter of the obtained fibers was between 5 and 10 μm corresponding to different additives. The additives affected the surface tension of the precursor sol which had close relation to the microstructure of fibers. Sucrose and hydroxyethylic cellulose could improve the surface tension while diethanolamine and hexadecylamine reduce that of the precursor sol. And using diethanolamine or hexadecylamine as an additive, well-structured BaFe12O19 fibers could be obtained. 相似文献
3.
烧结机台车属于耐热铸件,其主要的失效形式是氧化和生长造成的变形和裂纹,必须具有良好的热强度、抗氧化生长、耐热冲击及在循环应力作用下不产生裂纹等综合耐热性能.采用铁素体 珠光体的球墨铸铁,同时加入一定量的合金元素,合金化稳定珠光体,强化工艺措施的方法控制石墨的形态及尺寸,操作过程中严格控制关键工序的工艺规范,配合有力的检测手段,可保证了材质良好的机械强度、组织稳定性和化学稳定性. 相似文献
4.
某条材厂生产SWRM6盘条时,在拉拔过程中出现异常断裂。通过宏观观察、扫描电镜及金相显微镜对断裂试样进行了深入分析,结果表明,盘条的脆性断裂与组织中的铁素体晶粒粗大及晶界析出的渗碳体密切相关,因此,应当通过适当降低相关工艺温度,以及冷却时尽量避开有害温度区间等措施解决。 相似文献
5.
6.
NixZn1-xFe2O4铁氧体具有高频中低损耗的特点,通过提高Ni含量至0.8降低起始磁导率,增加截止频率,应用于更高频率。通过固相反应法合成了Ni0.8Zn0.2Fe2O4,并测定了铁氧体样品在低频低磁通密度下的损耗特性,讨论了烧结温度对损耗的影响。 相似文献
7.
Nurul Akidah BAHARUDDIN Hamimah Abd RAHMAN Andanastuti MUCHTAR Abu Bakar SULONG Huda ABDULLAH 《浙江大学学报(A卷英文版)》2013,14(1):11-24
Solid oxide fuel cells(SOFCs) offer high energy conversion,low noise,low pollutant emission,and low processing cost.Despite many advantages,SOFCs face a major challenge in competing with other types of fuel cells because of their high operating temperature.The necessity to reduce the operational temperature of SOFCs has led to the development of research into the materials and fabrication technology of fuel cells.The use of composite cathodes significantly reduces the cathode polarization resistance and expands the triple phase boundary area available for oxygen reduction.Powder preparation and composite cathode fabrication also affect the overall performance of composite cathodes and fuel cells.Among many types of cathode materials,lanthanum-based materials such as lanthanum strontium cobalt ferrite(La1-xSrxCo1-yFeyO3- have recently been discovered to offer great compatibility with ceria-based electrolytes in performing as composite cathode materials for intermediate-to low-temperature SOFCs(IT-LTSOFCs).This paper reviews various ceria-based composite cathodes for IT-LTSOFCs and focuses on the aspects of progress and challenges in materials technology. 相似文献
8.
9.
10.