首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 640 毫秒
1.
The aim of the study was to determine if sex differences exist in the key elbow and wrist joint injury risk factors during different cartwheel (CW) and round-off (RO) techniques performed by young male and female artistic gymnasts. Sixteen active young gymnasts (8 males and 8 females) performed 30 successful trials of CW and RO with three different hand positions (parallel (10), T-shape (10) and reverse (10)). Synchronised kinematic and kinetic data were collected for each trial. Two-way repeated measures ANOVA (3 × 2, technique × sex) and effect-sizes (ES) were used for statistical analysis. In conclusion, female gymnasts exhibited greater normalised peak vertical ground reaction forces (VGRF), elbow and wrist compression forces and elbow internal adduction moments during CW and RO skills compared with male gymnasts. In both sexes, the parallel and reverse techniques increased peak VGRF, elbow and wrist compression forces and the elbow internal adduction moment. Increased elbow flexion resulted in decreased peak VGRF, elbow compression forces and elbow internal adduction moment. Injury risk factors including elbow extension and internal adduction moment with axial compression force suggest that a CW and RO in reverse and parallel techniques can be hazardous especially for young female gymnasts.  相似文献   

2.
Biophysical loading of the elbow and wrist is a potential reason for chronic lesions in gymnastics and present a real concern for coaches, scientist and clinicians. Previous research has identified injury risk factors during round-off (RO) skills in elite female gymnasts. The aim of this study was to investigate key elbow and wrist joint injury risk factors during different techniques of fundamental cartwheel (CW) and RO skills performed by young female artistic gymnasts. Seventeen active young female gymnasts performed 30 successful trials of both CW and RO from a hurdle step with three different hand positions (parallel (10), T-shape (10) and reverse (10)). Synchronised kinematic (240?Hz) and kinetic (1200?Hz) data were collected for each trial. One-way repeated measures ANOVA and effect size (ES) were used for statistical analysis. The results showed statistically significant differences (P?0.8) among hand positions for peak vertical ground reaction force (VGRF), peak elbow compression force, peak wrist compression force, elbow internal adduction moment and wrist dorsiflexion angle. In conclusion, the parallel and reverse techniques increase peak VGRF, elbow and wrist compression forces, and elbow internal adduction moment. These differences indicate that the parallel and reverse techniques may increase the potential of elbow and wrist injuries in young gymnasts compared with the T-shape technique; this is of particular importance with the high frequency of the performance of these fundamental skills.  相似文献   

3.
Chronic elbow injuries from tumbling in female gymnastics present a serious problem for performers. This research examined how the biomechanical characteristics of impact loading and elbow kinematics and kinetics change as a function of technique selection. Seven international-level female gymnasts performed 10 trials of the round-off from a hurdle step to flic-flac with ‘parallel’ and ‘T-shape’ hand positions. Synchronized kinematic (3D-automated motion analysis system; 247 Hz) and kinetic (two force plates; 1,235 Hz) data were collected for each trial. Wilcoxon non-parametric test and effect-size statistics determined differences between the hand positions examined in this study. Significant differences (p < 0.05) and large effect sizes (ES>0.8) were observed for peak vertical ground reaction force (GRF), anterior–posterior GRF, resultant GRF, loading rates of these forces and elbow joint angles, and internal moments of force in sagittal, transverse, and frontal planes. In conclusion, the T-shape hand position reduces vertical, anterior–posterior, and resultant contact forces and has a decreased loading rate indicating a safer technique for the round-off. Significant differences observed in joint elbow moments highlighted that the T-shape position may prevent overloading of the joint complex and consequently reduce the potential for elbow injury.  相似文献   

4.
Waiter’s serve (WS) is a specific tennis serve posture frequently observed in young players, and commonly considered as a technical error by tennis coaches. However, biomechanical impact of WS is unknown. The aims of this study were to identify the potential consequences of WS in young elite players relating to performance and injury risk, and to explain the kinematic causes of WS. Serve of 18 male junior elite players (Top 10 national French ranking, aged 12–15 years) was captured with a 20 camera, 200?Hz VICON MX motion analysis system. Depending on their serve technique, the players were divided into two groups (WS versus Normal Serve [NS]) by experienced coaches. Injury data were collected for each player during a 12-month-period following the motion capture. Normalized peak kinetic values of the dominant arm were calculated using inverse dynamics. In order to explain WS posture, upper limb kinematics were calculated during the cocking and the acceleration phases of the serve. Shoulder internal rotation torque, wrist proximal and anterior forces (P?P?P?相似文献   

5.
The aim of this study was to explore the relationships between lower limb joint kinetics, external force production and starting block performance (normalised average horizontal power, NAHP). Seventeen male sprinters (100 m PB, 10.67 ± 0.32 s) performed maximal block starts from instrumented starting blocks (1000 Hz) whilst 3D kinematics (250 Hz) were also recorded during the block phase. Ankle, knee and hip resultant joint moment and power were calculated at the rear and front leg using inverse dynamics. Average horizontal force applied to the front (r = 0.46) and rear (r = 0.44) block explained 86% of the variance in NAHP. At the joint level, many “very likely” to “almost certain” relationships (r = 0.57 to 0.83) were found between joint kinetic data and the magnitude of horizontal force applied to each block although stepwise multiple regression revealed that 55% of the variance in NAHP was accounted for by rear ankle moment, front hip moment and front knee power. The current study provides novel insight into starting block performance and the relationships between lower limb joint kinetic and external kinetic data that can help inform physical and technical training practices for this skill.  相似文献   

6.
Lacrosse requires the coordinated performance of many complex skills. One of these skills is shooting on the opponents’ net using one of three techniques: overhand, sidearm or underhand. The purpose of this study was to (i) determine which technique generated the highest ball velocity and greatest shot accuracy and (ii) identify kinematic and kinetic variables that contribute to a high velocity and high accuracy shot. Twelve elite male lacrosse players participated in this study. Kinematic data were sampled at 250 Hz, while two-dimensional force plates collected ground reaction force data (1000 Hz). Statistical analysis showed significantly greater ball velocity for the sidearm technique than overhand (P < 0.001) and underhand (P < 0.001) techniques. No statistical difference was found for shot accuracy (P > 0.05). Kinematic and kinetic variables were not significantly correlated to shot accuracy or velocity across all shot types; however, when analysed independently, the lead foot horizontal impulse showed a negative correlation with underhand ball velocity (P = 0.042). This study identifies the technique with the highest ball velocity, defines kinematic and kinetic predictors related to ball velocity and provides information to coaches and athletes concerned with improving lacrosse shot performance.  相似文献   

7.
The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.  相似文献   

8.
Abstract

The metatarsophalangeal joint (MPJ) is a significant absorber of energy in sprinting. This study examined the influence of MPJ axis choice and filter cut-off frequency on kinetic variables describing MPJ function during accelerated sprinting. Eight trained sprinters performed maximal sprints along a runway. Three-dimensional high-speed (1000 Hz) kinematic and kinetic data were collected at the 20 m point. Three axis definitions for the five MPJs were compared. MPJ moments, powers and energies were calculated using different filter cut-off frequencies. The more anatomically appropriate dual axis resulted in less energy absorbed at the MPJ compared to the oblique axis which also absorbed less energy compared to the perpendicular axis. Furthermore, a low cut-off frequency (8 Hz) substantially underestimated MPJ kinematics, kinetics and the energy absorbed at the joint and lowered the estimate of energy production during push-off. It is concluded that a better understanding of MPJ function during sprinting would be obtained by using an oblique or anatomically appropriate representation of the joint together with appropriate kinematic data sampling and filtering so that high frequency movement characteristics are retained.  相似文献   

9.
This investigation assessed whether a Technique Refinement Intervention designed to produce pronounced vertical hip displacement during the kicking stride could improve maximal instep kick performance. Nine skilled players (age 23.7 ± 3.8 years, height 1.82 ± 0.06 m, body mass 78.5 ± 6.1 kg, experience 14.7 ± 3.8 years; mean ± SD) performed 10 kicking trials prior to (NORM) and following the intervention (INT). Ground reaction force (1000 Hz) and three-dimensional motion analysis (250 Hz) data were used to calculate lower limb kinetic and kinematic variables. Paired t-tests and statistical parametric mapping examined differences between the two kicking techniques across the entire kicking motion. Peak ball velocities (26.3 ± 2.1 m · s?1 vs 25.1 ± 1.5 m · s?1) and vertical displacements of the kicking leg hip joint centre (0.041 ± 0.012 m vs 0.028 ± 0.011 m) were significantly larger (P < 0.025) when performed following INT. Further, various significant changes in support and kicking leg dynamics contributed to a significantly faster kicking knee extension angular velocity through ball contact following INT (70–100% of total kicking motion, P < 0.003). Maximal instep kick performance was enhanced following INT, and the mechanisms presented are indicative of greater passive power flow to the kicking limb during the kicking stride.  相似文献   

10.
Biomechanics helps us understand the association between technique changes and performance improvement during learning. The aim of this research was to investigate joint kinetic characteristics of technique during learning of the longswing on the high bar. Twelve male, novice participants took part in the learning study. During swing attempts in 8 weekly testing sessions, kinematic data were collected. Inverse dynamics analysis was performed from known zero forces at the toes to quantify joint moments and power at the hips and shoulders. Key biomechanical constraints that limited performance outcome were identified based on changes in joint kinetics during learning. These constraints were the ability to perform a large shoulder power and to overcome passive kinetics acting during the downswing. Constraints to action at the level of joint kinetics differentially challenge learners and therefore could underpin more individual, specific learning interventions. Functional phases, defined by maximum hyperextension to flexion of the hips and maximum flexion to extension of the shoulders, did not describe the key joint kinetics of the hip and shoulder for novices. The functional phases may serve however to identify novices that were unable to overcome the passive kinetic constraint.  相似文献   

11.
This modelling study sought to describe the relationships between elbow joint kinematics and wrist joint linear velocity in cricket fast bowlers, and to assess the sensitivity of wrist velocity to systematic manipulations of empirical joint kinematic profiles. A 12-camera Vicon motion analysis system operating at 250 Hz recorded the bowling actions of 12 high performance fast bowlers. Empirical elbow joint kinematic data were entered into a cricket bowling specific “Forward Kinematic Model” and then subsequently underwent fixed angle, angular offset and angle amplification manipulations. A combination of 20° flexion and 20° abduction at the elbow was shown to maximise wrist velocity within the experimental limits. An increased elbow flexion offset manipulation elicited an increase in wrist velocity. Amplification of elbow joint flexion–extension angular displacement indicated that, contrary to previous research, elbow extension range of motion and angular velocity at the time of ball release were negatively related to wrist velocity. Some relationships between manipulated joint angular waveforms and wrist velocity were non-linear, supporting the use of a model that accounts for the non-linear relationships between execution and outcome variables in assessing the relationships between elbow joint kinematics and wrist joint velocity in cricket fast bowlers.  相似文献   

12.
聚焦跑步时髌股关节生物力学特征,探究穿着不同极简指数(MI)跑鞋对髌股关节接触力、应力等的即刻影响。选取15名习惯后跟着地的健康男性跑者,分别穿着两种MI跑鞋(MI 86%极简跑鞋和MI 26%缓冲跑鞋),使用Vicon红外运动捕捉系统、Kistler三维测力台同步采集3.33 m/s(速度变化范围±5%)跑速下的膝、踝关节运动学和地面反作用力,通过逆向动力学等计算股四头肌肌力、髌股关节接触力、髌股关节接触面积以及髌股关节接触应力。结果显示:两种跑鞋条件下的冲击力峰值和蹬地力峰值均无明显差异。与缓冲跑鞋相比,穿着极简跑鞋跑步时,膝关节最大屈曲角度显著降低(P<0.01);髌股关节接触面积显著减小(P<0.01);膝关节伸肌峰值力矩显著下降(P<0.01);髌股关节接触力和应力峰值均显著减小(P<0.05)。研究表明,相比缓冲跑鞋,穿着极简跑鞋在未影响触地后冲击力峰值的同时,通过降低伸膝力矩大幅度减少髌股关节接触力(下降17.02%)、降低髌股关节接触应力,从而有效改善支撑期髌股关节负荷,为进一步减小髌股关节疼痛综合征风险提供可能。  相似文献   

13.
Abstract

This study aimed to investigate the contributions of kinetic and kinematic parameters to inter-individual variation in countermovement jump (CMJ) performance. Two-dimensional kinematic data and ground reaction forces during a CMJ were recorded for 18 males of varying jumping experience. Ten kinetic and eight kinematic parameters were determined for each performance, describing peak lower-limb joint torques and powers, concentric knee extension rate of torque development and CMJ technique. Participants also completed a series of isometric knee extensions to measure the rate of torque development and peak torque. CMJ height ranged from 0.38 to 0.73 m (mean 0.55 ± 0.09 m). CMJ peak knee power, peak ankle power and take-off shoulder angle explained 74% of this observed variation. CMJ kinematic (58%) and CMJ kinetic (57%) parameters explained a much larger proportion of the jump height variation than the isometric parameters (18%), suggesting that coachable technique factors and the joint kinetics during the jump are important determinants of CMJ performance. Technique, specifically greater ankle plantar-flexion and shoulder flexion at take-off (together explaining 58% of the CMJ height variation), likely influences the extent to which maximal muscle capabilities can be utilised during the jump.  相似文献   

14.
The purposes of this study were to investigate (1) the relationships between official distance and selected ground reaction measures during discus throwing; and (2) the relationships between selected ground reactions and selected lower extremity joint kinetics. Three high-speed video cameras and three force plates were used to collect three-dimensional videographic and force plate data in this study. An inverse dynamic model was used to determine the lower extremity kinetics. Multiple regression analyses were conducted to determine relationships of the selected kinematic and kinetic measures with the official distance. Official distance was significantly correlated with ground reaction forces on the left foot during the first single-support phase, on the right foot during the second single-support phase and delivery phase, and on the left foot during the delivery phase. Also, the right-hip extension and internal rotation moments and left-knee extension moment during the delivery phase were significantly correlated with official distance. These results suggest that discus throwers should drive vigorously forward during the first single-support phase and increase the landing impact force on the right foot after flight. Also they should increase forward and rightward ground reaction force on the right foot and backward and vertical force on the left foot by powerful right-hip extension and internal rotation and left-knee extension during the delivery phase. These results provide critical information regarding the training of discus-throwing techniques, and the direction of future biomechanical studies on this event.  相似文献   

15.
Attaining high speed of the stick head and consequently of the ball is essential for successful performance of the drag flick in field hockey, but the coordination pattern used to maximise stick head speed is unknown. The kinematics of the drag flick was studied in ten elite hockey players who performed twenty shots each towards a target located 1.5 m high. A 150 Hz active marker motion analysis system was used, alongside two force plates to detect foot touchdown. Angular velocity and contribution to stick endpoint speed of upper body joints were analysed. Repeated measures ANOVA was used to compare timing of onset and peak angular velocities between joints. Participants used a kinematic pattern that was close to a proximal-to-distal sequence. Trunk axial rotation and lateral rotation towards the target, right wrist flexion and left wrist extension were the main contributors to stick endpoint speed. Coaches should emphasise trunk rotations and wrist flexion and extension movements for maximising stick head speed. Given the high level of the participants in this study, the coordination of joints motions, as reported here, can serve as a guideline for drag flick training.  相似文献   

16.
Our purpose was to compare joint loads between habitual rearfoot (hRF) and habitual mid/forefoot strikers (hFF), rearfoot (RFS) and mid/forefoot strike (FFS) patterns, and shorter stride lengths (SLs). Thirty-eight hRF and hFF ran at their normal SL, 5% and 10% shorter, as well as with the opposite foot strike. Three-dimensional ankle, knee, patellofemoral (PF) and hip contact forces were calculated. Nearly all contact forces decreased with a shorter SL (1.2–14.9% relative to preferred SL). In general, hRF had higher PF (hRF-RFS: 10.8 ± 1.4, hFF-FFS: 9.9 ± 2.0 BWs) and hip loads (axial hRF-RFS: ?9.9 ± 0.9, hFF-FFS: ?9.6 ± 1.0 BWs) than hFF. Many loads were similar between foot strike styles for the two groups, including axial and lateral hip, PF, posterior knee and shear ankle contact forces. Lateral knee and posterior hip contact forces were greater for RFS, and axial ankle and knee contact forces were greater for FFS. The tibia may be under greater loading with a FFS because of these greater axial forces. Summarising, a particular foot strike style does not universally decrease joint contact forces. However, shortening one’s SL 10% decreased nearly all lower extremity contact forces, so it may hold potential to decrease overuse injuries associated with excessive joint loads.  相似文献   

17.
Athletics     
The purposes of this study were to investigate (1) the relationships between official distance and selected ground reaction measures during discus throwing; and (2) the relationships between selected ground reactions and selected lower extremity joint kinetics. Three high‐speed video cameras and three force plates were used to collect three‐dimensional videographic and force plate data in this study. An inverse dynamic model was used to determine the lower extremity kinetics. Multiple regression analyses were conducted to determine relationships of the selected kinematic and kinetic measures with the official distance. Official distance was significantly correlated with ground reaction forces on the left foot during the first single‐support phase, on the right foot during the second single‐support phase and delivery phase, and on the left foot during the delivery phase. Also, the right‐hip extension and internal rotation moments and left‐knee extension moment during the delivery phase were significantly correlated with official distance. These results suggest that discus throwers should drive vigorously forward during the first single‐support phase and increase the landing impact force on the right foot after flight. Also they should increase forward and rightward ground reaction force on the right foot and backward and vertical force on the left foot by powerful right‐hip extension and internal rotation and left‐knee extension during the delivery phase. These results provide critical information regarding the training of discus‐throwing techniques, and the direction of future biomechanical studies on this event.  相似文献   

18.
The aim of this study was to investigate differences in joint power generation between well-trained adult athletes and young sprinters from block clearance to initial contact of second stance. Eleven under 16 (U16) and 18 under 18 (U18) promising sprinters executed an explosive start action. Fourteen well-trained adult sprinters completed the exact same protocol. All athletes were equipped with 74 spherical reflective markers, while an opto-electronic motion analysis system consisting of 12 infrared cameras (250 Hz, MX3, Vicon, Oxford Metrics, UK) and 2 Kistler force plates (1,000 Hz) was used to collect the three-dimensional marker trajectories and ground reaction forces (Nexus, Vicon). Three-dimensional kinematics, kinetics, and power were calculated (Opensim) and time normalised from the first action after gunshot until initial contact of second stance after block clearance. This study showed that adult athletes rely on higher knee power generation during the first stance to induce longer step length and therefore higher velocity. In younger athletes, power generation of hip was more dominant.  相似文献   

19.
ABSTRACT

Fast bowling is categorised into four action types: side-on, front-on, semi-open and mixed; however, little biomechanical comparison exists between action types in junior fast bowlers. This study investigated whether there are significant differences between action-type mechanics in junior fast bowlers. Three-dimensional kinematic and kinetic analyses were completed on 60 junior male fast bowlers bowling a five-over spell. Mixed-design factorial analyses of variance were used to test for differences between action-type groups across the phases of the bowling action. One kinetic difference was observed between groups, with a higher vertical ground reaction force loading rate during the front-foot contact phase in mixed and front-on compared to semi-open bowlers; no other significant group differences in joint loading occurred. Significant kinematic differences were observed between the front-on, semi-open and mixed action types during the front-foot contact phase for the elbow and trunk. Significant kinematic differences were also present for the ankle, T12-L1, elbow, trunk and pelvis during the back-foot phase. Overall, most differences in action types for junior fast bowlers occurred during the back-foot contact phase, particularly trunk rotation and T12-L1 joint angles/ranges of motion, where after similar movement patterns were utilized across groups during the front-foot contact phase.  相似文献   

20.
This article deals with kinematic and kinetic conditions in volleyball attack and identifies loads in the shoulder joint. Joint angles and velocities of individual segments of upper limb were measured with the use of the motion capture system XSENS. Muscle forces and loads in skeletal system were calculated by means of mathematical model elaborated in AnyBody system. Spikes performed by players in the best and worst way were compared with each other. The relationships were found between reactions in shoulder joint and flexion/extension, abduction/adduction and rotation angles in the same joint and flexion/extension in the elbow joint. Reactions in shoulder joint varied from 591 N to 2001 N (in relation to body weight [BW] 83–328%).

The analysis proved that hand velocity at the moment of the ball hit (which varied between 6.8 and 13.3 m s–1) influences on the value of reaction in joints, but positions of individual segments relative to each other are also crucial. It was also proved in objective way, that position of the upper limb during spike can be more or less harmful assuming that bigger reaction increases possibility of injury, what can be an indication for trainers and physiotherapists how to improve injury prevention.  相似文献   


设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号